F21287D EN:Layout 1 - Pirchstorageprod.blob.core.windows
InstallationProfessional Indoor & Outdoor HoodsVWH53012 / CVWH53012 / VWH53612 / CVWH53612VWH53048 / CVWH53048 / VWH53648 / CVWH53648 / VWH54248 / CVWH54248 /VWH54848 / CVWH54848 / VWH56048 / CVWH56048VCWH53048 / CVCWH53048 / VCWH53648 / CVCWH53648 / VCWH54248 / CVCWH54248 /VCWH54848 / CVCWH54848 / VCWH56048 / CVCWH56048VCIH53608 / CVCIH53608 / VCIH54208 / CVCIH54208 / VCIH55408 / CVCIH55408 / VCIH56608 / CVCIH56608VBCV53638 / CVBCV53638 / VBCV54238 / CVBCV54238 / VBCV54838 / CVBCV54838 / VBCV56038 / VBCV56038VWHO3678 / VWHO4878 / VWHO6078 (Canadian Outdoor models not applicable)
Table of ContentsWarnings & Important Information 3-4VWH/CVWH 10” H/12”H. Wall Hoods w/Standard Ventilator 30”, & 36”Dimensions & Specifications 5Clearance Dimensions 6Interior Ventilator Dimensions 7VWH/CVWH 18”H. 24”Deep Wall Hoods 30”, 36”, 42”, 48”, & 60”Dimensions & Specifications 8Clearance Dimensions 9Interior Ventilator Dimensions 10Exterior Ventilator Dimensions 11VWHO/CVWHO 18”H. Outdoor Wall Hoods 36”, 48”, & 60”Dimensions & Specifications 12Clearance Dimensions 13VCWH/CVCWH Chimney Wall Hoods 30”, 36”, 42”, 48”, & 60”Dimensions & Specifications 14Clearance Dimensions 15Interior Ventilator Dimensions 16Exterior Ventilator Dimensions 17VCIH/CVCIH Chimney Island Hoods 36”, 42”, 54”, & 66”Dimensions & Specifications 18Clearance Dimensions 19Interior Ventilator Dimensions 20Exterior Ventilator Dimensions 21VBCV/CVBCV Wall Custom Ventilator SystemDimensions & Specifications 22Installing Hood Canopy 23Clearance Dimensions 24VBCV Ventilator Dimensions 25Planning Information 27Installation ProceduresInstallation (VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator) 28Duct Cover Option (VWH/CVWH 12”H. Wall Hoods w/Standard Ventilator) 30Installation (VWH/CVWH 12”H. Wall Hoods w/Recirculating Kit) 30Installation (VWH/CVWH 18”H. Wall & VCWH Chimney Wall Hoods) 33Duct Cover Option (VWH/CVWH 18”H. Wall Hoods) 34Duct Cover Option (VCWH/CVCWH Chimney Wall Hoods) 35Installation (VCIH Island Hoods) 36Service & Registration 38Wiring Diagram 392
IMPORTANT–Please Read and Follow!NOTE: If installing hood with warming shelf panel, installwarming shelf panel first.WARNINGTo reduce the risk of fire, electric shock, or injury topersons, observe the following:IMPORTANT – PLEASE READ AND FOLLOW Before beginning, please read these instructionscompletely and carefully. Do not remove permanently affixed labels, warnings, orplates from the product. This may void the warranty. Please observe all local and national codes andordinances. If no local codes are applicable, wire inaccordance with the National Electrical Code,ANSI/NFPA 70-latest edition. Damp environment approved models should be installedin a covered non-enclosed area and should be protectedfrom the elements as much as possible. The installer should leave these instructions with theconsumer who should retain for local inspector’s use andfor future reference. Check with a qualified and trained installer or local codesfor makeup air requirement, if any. Use this unit only in the manner intended by themanufacturer. If you have any questions, contactthe manufacturer. Before servicing or cleaning unit, switch power offat service panel and lock service panel to preventpower from being switched on accidentally. Whenthe service disconnecting means cannot be locked,securely fasten a prominent warning device, suchas a tag, to the service panel.WARNINGTO REDUCE THE RISK OF FIRE, ELECTRICALSHOCK, OR INJURY TO PERSONS, OBSERVETHE FOLLOWING:1. Installation work and electrical wiring must bedone by qualified person(s) in accordance withall applicable codes and standards, includingfire-rated construction.2. Sufficient air is needed for proper combustionand exhausting of gases through the flute(chimney) of fuel burning equipment to preventback drafting. Follow the heating equipmentmanufacturer’s guideline and safety standardssuch as those published by the National FireProtection Association (NFPA), and theAmerican Society for Heating, Refrigeration andAir Conditioning Engineers (ASHRAE), and thelocal code authorities.3. When cutting of drilling into wall or ceiling, donot damage electrical wiring and other hiddenutilities.4. Ducted fans must always be vented to the outdoors.5. WARNING!: To reduce risk of fire, use onlymetal ductwork6. CAUTION!: To reduce risk of fire and toproperly exhaust air, be sure to duct air outside.Do not vent exhaust air into spaces within wallsor ceilings, or into attics, crawl spaces, orgarages.7. CAUTION!: To Reduce the Risk of Fire andElectric Shock, Install this rangehood only withremote blower models manufactured by Viking,model numbers – DEV900/DEV1200, VEV900,VIL1200, OR DEV1500 or integral blowersmanufactured by Viking, model numbers –VINV300/600/1200, or DIL1200. NOTE – Pleaserefer inside for specific canopy/blowercombinations.This hood is for residential installation only and is notdesigned for installation over a commercial product. Makesure power is off at the main circuit breaker or fuse boxbefore making connections. To avoid risk of fire, electricshock, or injury to persons, turn off the electricity to thehood from the power supply before servicing or cleaning.Viking hoods are equipped with variable speed controlblowers. These units will not function with a single speedventilator. All Viking Range ventilator kits are designedspecifically for use with Viking Range hoods. Use of anynon-Viking Range ventilator kit will void the hood warranty.Viking hoods are equipped with the variable speedcontrols for blowers. These units will not function with asingle speed ventilator. All Viking ventilator kits aredesigned specifically for use with Viking hoods. Use of anynon-Viking ventilator kit will void the hood warranty.READ AND SAVE THESE INSTRUCTIONS3
IMPORTANT–Please Read and Follow!WARNINGWARNINGTo reduce the risk of injury to persons in the eventof a rangetop grease fire, observe the following.(Based on “Kitchen Firesafety Tips,” published byNFPA.)This appliance is not to be used by persons(including children) with reduced physical, sensory ormental capabilities, or lack of experience andknowledge, unless they have been given supervisionor instruction concerning the use of the applianceby a person responsible for their safety. Childrenshould be supervised to ensure that they do notplay with the appliance.1. SMOTHER FLAMES with a close fitted lid, cookiesheet, or metal tray, then turn off the burner. BECAREFUL TO PREVENT BURNS. If the flames donot go out immediately, EVACUATE AND CALLTHE FIRE DEPARTMENT.2. NEVER PICK UP A FLAMING PAN. You may beburned.3. DO NOT USE WATER, including wet dishcloths ortowels a violent steam explosion will result.4. Use an extinguisher ONLY if You know it is a Class ABC extinguisher, and youalready know how to operate it. The fire is small and contained in the area whereit started. The fire department is being called. You can fight the fire with your back to an exit.CAUTIONFor general ventilating use only. Do not use toexhaust hazardous or explosive materials andvapors.WARNINGTO REDUCE THE RISK OF FIRE,ELECTRICAL SHOCK, OR INJURYTO PERSONSRangehoods must be installed withthe ventilators that are specified ontheir carton indicating suitability withthis model. Other ventilators cannot be substituted.4
Dimensions & Specifications(VWH 10”H./12”H. Wall Hoods w/Standard Ventilator 30”, & 36”)1(30 2 ”.5cm)(2510”.4c(12 5”.7cmm))”21 cm)A.3(53130”W.36”W.(30 2 ”.5cm)A (Hood width)29-7/8“ (76.2 cm)35-7/8” (91.1 cm)1(30 2 ”.5cm)(12 5”.7cm)”21 cm)A.3(5330”W.36”W.A (Hood width)29-7/8“ (76.2 cm)35-7/8” (91.1 cm)NOTE: Optional duct cover sold separately.VWH/CVWH 10”H./12”H. Wall Hoodsw/Standard VentilatorDescriptionDuct cover width30”36”29-7/8” (75.9 cm)35-7/8” (91.1 cm)Duct cover depth12” (30.5 cm)Duct cover height12” (30.5 cm)Number of lights2Number of filters2N/AHeat lampsInterior ventilator kitInterior duct size*460 CFM Standard7” (17.8 cm)5.6 AInterior—Maximum amps* Disregard when using recirculating kits.460 CFM blower is shipped with hood.5
Clearance Dimensions(VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)6024(15" m2.4 in.c63 to m)"(16 m0.0 ax.cm)(61" mi.0 n.c27 to m)"m(68 a.6 x.*cm)"36 cm).4(91* NOTE: When installing with a 24” high-shelf,the 27” (68.6 cm) max. dimensions must be used.6
Interior Ventilator Dimensions(VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)Top View24”W.30”W.36”W.A23-7/8” (60.6 cm)29-7/8” (75.9 cm)35-7/8” (91.1 cm)24”W.30”W.36”W.B5-1/4” (13.3 cm)8-1/4” (20.9 cm)11-1/4” (28.6 cm)24”W.30”W.36”W.C11-15/16” (30.3 cm)14-15/16” (37.9 cm)17-15/16” (45.6 cm)24”W.30”W.36”W.D5/8” (1.6 cm)3-5/8” (9.2 cm)6-5/8” (16.8 cm)A18”(4.6 cm)BD3-4”(1.9 cm)C4”(10.2 cm)3-7/8”(9.8 cm)7” (17.8 cm) dia.duct location460 CFM Interior Ventilator Installation71/2”(1.3 cm)3-1/2”(8.9 cm)Electricalhookup
Dimensions & Specifications(VWH/CVWH 18”H. 24” Deep Wall Hoods 30”, 36”, 42”, 48”, & 60”)30" W36" W42" W48" W60" WA29-7/8" (76.2 cm)35-7/8" (91.1 cm)41-7/8" (106.4 cm)47-7/8" (121.6 cm)59-7/8" (152.1 cm)(3012".5cm)(15 6".2cm(4518".7cm))A"24 cm).0(61NOTE: Optional duct cover sold separately.VWH/CVWH 18”H. Wall HoodsDescriptionDuct cover width30”36”42”48”60”29-7/8”(75.9 cm)35-7/8”(91.1 cm)41-7/8”(106.4 cm)47-7/8”(121.6 cm)59-7/8”(152.1 cm)Duct cover depth12” (30.5 cm)Duct cover height12” (30.5 cm)Number of lights22234Number of *DIL1200DEV1200*/1500**DIL12007”/10”(17.8/25.4 cm)7”/10”(17.8/25.4 cm)7”/10”(17.8/25.4 cm)10”(25.4 cm)10”(25.4 cm)Interior—Maximum ��Maximum aximum amps5.3/7.25.3/7.25.3/7.29.610.0Heat lampsInterior ventilator kitsExterior ventilator kitsIn-line ventilator kitsInterior duct size10” (24.5 cm)Exterior duct size47 WattsTotal Watts* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.Max duct run is 50 ft.** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.8
Clearance Dimensions(VWH/CVWH 18”H. Wall Hoods)66(16” m7.6 in.c72 to m)”(18 m2.9 ax.cm)30(76” mi.2 n.c36 to m)”(91 ma.4 x.cm)”36 cm).4(919
Interior Ventilator Dimensions(VWH/CVWH 18”H. Wall Hoods)Top ViewA30" W36" W42" W48" W60" WA14-15/16" (37.9 cm)17-15/16" (45.6 cm)20-15/16" (53.2 cm)23-15/16" (60.8 cm)29-15/16" (76.0 cm)30" W36" W42" W48" W60" W4-5/8"(11.7 cm)B29-7/8" (75.9 cm)35-7/8" (91.1 cm)41-7/8" (106.4 cm)47-7/8" (121.6 cm)59-7/8" (152.1 cm)7" (17.8 cm)dia. duct locationB300 or 600 CFM Interior Ventilator Installation for all Wall HoodsTop ViewA30" W36" W42" W48" W60" WA14-15/16" (37.9 cm)17-15/16" (45.6 cm)20-15/16" (53.2 cm)23-15/16" (60.8 cm)29-15/16" (76.0 cm)30" W36" W42" W48" W60" W5-1/2"(14.0 cm)B29-7/8" (75.9 cm)35-7/8" (91.1 cm)41-7/8" (106.4 cm)47-7/8" (121.6 cm)59-7/8" (152.1 cm)10" (25.4 cm)dia. duct locationB1200 CFM Interior Ventilator Installation for all Wall Hoods10
Exterior Ventilator Dimensions(VWH/CVWH 18”H. Wall Hoods)Top ViewA30" W36" W42" W48" W60" WA14-15/16" (37.9 cm)17-15/16" (45.6 cm)20-15/16" (53.2 cm)23-15/16" (60.8 cm)29-15/16" (76.0 cm)30" W36" W42" W48" W60" W5-15/16"(15.1 cm)B29-7/8" (75.9 cm)35-7/8" (91.1 cm)41-7/8" (106.4 cm)47-7/8" (121.6 cm)59-7/8" (152.1 cm)10" (25.4 cm)dia. duct locationB900 or 1200 CFM Exterior or In-Line Ventilator Installation for allWall HoodsTop ViewA30" W36" W42" W48" W60" WA14-15/16" (37.9 cm)17-15/16" (45.6 cm)20-15/16" (53.2 cm)23-15/16" (60.8 cm)29-15/16" (76.0 cm)30" W36" W42" W48" W60" W5-15/16"(15.1 cm)B29-7/8" (75.9 cm)35-7/8" (91.1 cm)41-7/8" (106.4 cm)47-7/8" (121.6 cm)59-7/8" (152.1 cm)10" (25.4 cm)dia. duct locationB1200 or 1500 CFM Exterior or In-Line Ventilator Installation for allWall Hoods11
Dimensions & Specifications(VWHO/CVWHO 18”H. Outdoor Wall Hoods 36”, 48”, & 60”)Seal joints with silicone.Provided on “T” Series only.(3012".5cm)(15 6".2cm(4518".7cm))A35-7/8" (91.1 cm)47-7/8" (121.6 cm)59-7/8" (152.1 cm)36" W48" W60" W"27 cm)A.6(68NOTE: Optional duct cover sold separately.VWHO/CVWHO 18”H. Outdoor Wall HoodsDescriptionDuct cover width36”48”60”35-7/8” (91.1 cm)47-7/8” (121.6 cm)59-7/8” (152.1 cm)12” (30.5 cm)Duct cover depth12” (30.5 cm)Duct cover heightNumber of lights234Number of filters234Interior ventilator kitsVINV1200*VINV1200*VINV1200*Exterior ventilator IL1200DIL1200In-line ventilator kitsDIL1200Interior duct size10” (25.4 cm)Exterior duct size10” (25.4 cm)Interior—Maximum amps9.011.411.8Exterior—Maximum amps6.1/6.88.4/9.18.8/9.5In-Line—Maximum amps7.910.210.647 WattsTotal watts* A 1,200 CFM interior- or exterior-power ventilator should be used with all outdoor models and when indoor models areinstalled over range/rangetop with gas char-grill. Max duct run is 50 ft.** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.12
Clearance Dimensions(VWHO/CVWHO 18”H. Outdoor Wall Hoods)"18 )mc5.7»«XM 1/2")ID 4- m 1.4 c(4(1"27 cm).6(6866(16" m7.6 in.c72 to m)(18" m2.9 ax.cm)30(76" m. 2 in.c36 to m)"m(91 a.4 x.cm)"36 cm).4(91Note: Outdoor Models must be installed in a covered, non-enclosed area, and should be protected fromthe elements as much as possible.The bottom of the hood should be 30” (76.2 cm) to 36” (91.4 cm) above the grill surface. The hoodshould be installed 4-1/2” (11.4 cm) plus the distance between the back trim and surface from the backwall. (Note: There is a 3” minimum clearance from the back trim to non-combustible surfaces, and a 24”minimum to combustible surfaces.) This will require building the hood out from the wall. Any combustiblematerial used for this purpose must be covered with locally-supplied stainless steel. Viking alsorecommends using a backsplash.13
Dimensions & Specifications(VCWH/CVCWHChimney Wall Hoods 30”, 36”, 42”, 48”, 54”, & 60”)A30”W.36”W.42”W.48“W.60”W.66”W.A (Duct width)12“ (30.5 cm)12“ (30.5 cm)12“ (30.5 cm)18“ (45.7 cm)24“ (61.0 cm)24“ (61.0 cm)B (Hood width)30”W.29-7/8“ (76.2 cm)36”W.35-7/8” (91.1 cm)42”W.41-7/8” (106.4 cm)48“W.47-7/8” (121.6 cm)60”W.59-7/8” (152.1 cm)66”W.65-7/8” (167.3 cm)(3012”.5cto m)(6124”.0cm)(15 6”.2cm)(4518”.7cm)”24 cm)B.0(61NOTE: Optional duct cover sold separately.VCWH Chimney Wall HoodsDescriptionDuct cover width30”12” (30.5 cm)36”42”48”60”12” (30.5 cm) 12” (30.5 cm) 18” (45.7 cm) 24” (61.0 cm)12” (30.5 cm)Duct cover depth12” (30.5 cm) to 24” (61.0 cm)Duct cover heightNumber of lights22234Number of */1500**DIL12007” (17.8 cm)7” (17.8 cm)7” (17.8 cm)Interior—Maximum amps4.2/5.24.2/5.210.810.8Exterior—Maximum aximum ampsTotal Watts5.3/7.25.3/7.25.3/7.29.610.0Heat lampsInterior ventilator kitsExterior ventilator kitsIn-line ventilator kitsInterior duct sizeExterior duct size10” (25.4 cm)5.210” (25.4 cm) 10” (25.4 cm)47Watts* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Maxduct run is 50 ft.** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2-wirewith ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.14
Clearance Dimensions(VCWH/CVCWH Chimney Wall Hoods)66(16” m7.6 in.c72 to m)(18” m2.9 ax.cm)30(76” mi.2 n.c36 to m)”m(91 a.4 x.cm)”36 cm).4(9115
Interior Ventilator Dimensions(VCWH/CVCWH Chimney Wall Hoods)Top View12”(30.5 cm)120Vpowersupply1-1/2”(3.8 cm)A30”W.36”W.42”W.A14-15/16” (37.9 cm)17-15/16” (45.6 cm)20-15/16” (53.2 cm)30”W.36”W.42”W.B29-7/8” (75.9 cm)35-7/8” (91.1 cm)41-7/8” (106.4 cm)6”(15.2 cm)1-1/2”(3.8 cm)7” (17.8 cm) dia.duct locationB300 or 600 CFM Interior Ventilator Installationfor 30”, 36”, & 42” modelsTop ViewC1-1/2”(3.8 cm)120 VpowersupplyA48”W.60”W.66”W.A23-15/16” (60.8 cm)29-15/16” (76.0 cm)32-15/16” (83.7 cm)48”W.60”W.66”W.B47-7/8” (121.6 cm)59-7/8” (152.1 cm)65-7/8” (167.3 cm)6”(15.2 cm)1-1/2”(3.8 cm)48”W.60”W.66”W.10” (25.4 cm) dia.duct locationB1200 CFM Interior Ventilator Installationfor 48”, & 60”models16C18” (45.7 cm)24” (61.0 cm)24” (61.0 cm)
Exterior Ventilator Dimensions(VCWH/CVCWH Chimney Wall Hoods)Top View12”(30.5 cm)1-1/2”(3.8 �� (37.9 cm)17-15/16” (45.6 cm)20-15/16” (53.2 cm)30”W.36”W.42”W.B29-7/8” (75.9 cm)35-7/8” (91.1 cm)41-7/8” (106.4 cm)6”(15.2 cm)1-1/2”(3.8 cm)10” (25.4 cm) dia.duct locationB900 or 1200 CFM Exterior or In-Line Ventilator Installationfor 30”, 36”, & 42” modelsTop ViewC1-1/2”(3.8 cm)120 VpowersupplyA48”W.60”W.66”W.A23-15/16” (60.8 cm)29-15/16” (76.0 cm)32-15/16” (83.7 cm)48”W.60”W.66”W.B47-7/8” (121.6 cm)59-7/8” (152.1 cm)65-7/8” (167.3 cm)6”(15.2 cm)1-1/2”(3.8 cm)48”W.60”W.66”W.C18” (45.7 cm)24” (61.0 cm)24” (61.0 cm)10” (25.4 cm) dia.duct locationB900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installationfor 48”, & 60”models17
Dimensions & Specifications(VCIH/CVCIH Chimney Island Hoods 36”, 42”, 54”, & 66”)AA12" (30.5 cm)12" (30.5 cm)18" (45.7 cm)24" (70.0 cm)36" W42" W54" W66" WB12" (30.5 cm)or24" (61.0 cm)or36" (91.4 cm)36" W.42" W.54" W.66" W.36" W42" W54" W66" W(15 6".2cmB)(4518".7cm)C35-7/8" (91.1 cm)41-7/8" (106.4 cm)53-7/8" (136.8 cm)65-7/8" (167.3 cm)"30 cm)C.2(76NOTE: Optional duct cover sold separately.VCIH/CVCIH Chimney Island HoodsDescriptionDuct cover width36”42”54”66”12” (30.5 cm)12” (30.5 cm)18” (45.7 cm)24” (70.0 cm)Duct cover depth12” (30.5 cm)Duct cover height12” (30.5 cm) or 24” (61.0 cm) or 36” (91.4 cm)Number of lights4468Number of filters4468Interior ventilator kitsVINV600VINV600VINV1200*VINV1200*Exterior ventilator DEV1200*/1500**DIL1200DIL1200DIL1200DIL12007” (17.8 cm)7” (17.8 cm)10” (25.4 cm)10” (25.4 cm)Interior—Maximum amps4.2/5.2/8.25.2/8.28.99.3Exterior—Maximum mum ampstotal Watts4.7/6.53.9/5.77.47.4N/AHeat lampsIn-line ventilator kitsInterior duct size10” (25.4 cm)Exterior duct size47 Watts* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max ductrun is 50 ft.** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2-wire withground. An interior or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.18
Clearance Dimensions(VCIH /CVCIHChimney Island Hoods)66(16” m7.6 in.c72 to m)”(18 m2.9 ax.cm)30(76” min.2 c .m36 to )”(91 max.4 c .m)”36 cm).4(9119
Interior Ventilator Dimensions(VCIH/CVCIH Chimney Island Hoods)Top View12”(30.5 cm)36”W.42”W.A17-15/16” (45.6 cm)20-15/16” (53.2 cm)36”W.42”W.B35-7/8” (91.1 cm)41-7/8” (106.4 cm)1-1/8”(2.9 cm)120 VpowersupplyA1-1/8”(2.9 cm)6”(15.2 cm)7” (17.8 cm) dia.duct locationB600 CFM Interior Ventilator Installationfor all Chimney Island HoodsTop ViewC54”W.66”W.A26-15/16” (68.4 cm)32-15/16” (83.7 cm)54”W.66”W.B53-7/8” (136.8 cm)65-7/8” (167.3 cm)54”W.66”W.C18” (45.7 cm)24” (61.0 cm)1-1/8”(2.9 cm)A120 Vpowersupply1-1/8”(2.9 cm)6”(15.2 cm)10” (25.4 cm) dia.duct locationB1200 CFM Interior Ventilator Installationfor all Chimney Island Hoods20
Exterior Ventilator Dimensions(VCIH/CVCIH Chimney Island Hoods)Top View12”(30.5 cm)36”W.42”W.A17-15/16” (45.6 cm)20-15/16” (53.2 cm)36”W.42”W.B35-7/8” (91.1 cm)41-7/8” (106.4 cm)1-1/8”(2.9 cm)120 VpowersupplyA1-1/8”(2.9 cm)6”(15.2 cm)10” (25.4 cm) dia.duct locationB900 or 1200 CFM Exterior or In-Line Ventilator Installationfor all Chimney Island HoodsTop ViewC54”W.66”W.A26-15/16” (68.4 cm)32-15/16” (83.7 cm)54”W.66”W.B53-7/8” (136.8 cm)65-7/8” (167.3 cm)54”W.66”W.C18” (45.7 cm)24” (61.0 cm)1-1/8”(2.9 cm)A120 Vpowersupply1-1/8”(2.9 cm)6”(15.2 cm)10” (25.4 cm) dia.duct locationB900, 1200 or 1500 CFM Exterior or In-Line Ventilator Installationfor all Chimney Island Hoods21
Dimensions & Specifications(VBCV Wall Custom Ventilator System 36”, 42”, 48”, & 60”)A**For best results,center the unit overthe burners of thecooking product(front to back; rightto left).Make sure the back wallof the custom hoodcanopy is flush with thecutout so the ventilatorsystem may be mountedas shown on page 25.B*Bottom Cutout DimensionsWall HoodsDescription36”42”48”60”W.W.W.W.A (Hood Width)B (Hood Depth)33-7/16” (84.9 cm)39-7/16” (100.2 cm)45-7/16” (115.4 cm)57-7/16” (145.9 4.5(54.5(54.5cm)cm)cm)cm)VBCV Wall Custom Ventilator SystemDescription36”42”48”60”Number of lights2234Number of filters2234Heat lamps1123Interior ventilator kitsExterior ventilator kitsIn-line ventilator kitsInterior duct sizeVINV300/600/1200*DEV900/1200*DIL1200VINV600/ VINV1200* VINV1200*1200*DEV900/DEV1200*/ 07”/10”7”/10”10”(17.8/25.4 cm) (17.8/25.4 cm) (25.4 cm)10”(25.4 cm)10” (25.4Exterior duct sizeInterior—Maximum amps4.2/5.210.810.810.8Exterior—Maximum amps8.0/5.38.0/5.37.8/8.57.8/8.5In-Line—Maximum amps5.3/7.25.3/7.29.610.047 WattsTotal Watts* A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill.Max duct run is 50 ft.** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft.NOTE: Maximum amp rating for hoods includes recommended ventilator kit rating; All products must be hard wired with 2wire with ground. An interior- or exterior-power ventilator kit must be purchased for installation with all 18”H. hoods.22
Installing Hood Canopy(Custom Hood Canopy Cutouts)Custom HoodCanopyAB1) Position ventilatorsystem inside of thecustom hood canopyand center it front toback and left to right.Built-In VentilatorSystem2) Bottom mounting holesfasten ventilator systemto bottom of customhood canopy with thescrews provided.3) OPTIONALRear mounting holes fastenventilator system to rear ofcustom hood canopy.23
Clearance Dimensions(VBCV/CVBCV Wall Custom Ventilator System)(CustomHood)66(16" m7.6 in.c72 to m)"(18 m2.9 ax.cm)30(76" mi.2 n.c36 to m)"m(91 a.4 x.cm)"36 cm).4(9124
Built-In Wall Custom VentilatorSystem Dimensions (VBCV Models)1-1/2”(3.8 cm)1"(2.54 cm)1-1/2"(3.81 cm)7/8”(2.2 cm)11-1/2”(29.2 cm)17-1/4”(43.8 cm)6”(15.2 cm)5/8"(1.6 cm)5/8”(1.6 cm)21-7/8”(55.8 cm)21-7/8po(55.8 cm)For 300, 600 or 1200 CFM InteriorVentilator InstallationFor 900, 1200 or 1500 CFM Exterioror In-Line Ventilator InstallationDD4-5/8"(11.7 cm)5-1/2"(14.0 cm)7" (17.8 cm)dia. duct location10" (25.4 cm)dia. duct location5/8" (1.6 cm)5/8" (1.6 cm)CC300 or 600 CFM InteriorVentilator Installation36”, 42” W. Models900 or 1200 CFM Exterioror In-Line Ventilator Installation36”, 42” W. ModelsDC36” W.42” W.36” W.42” W.34-1/4” (87.0 cm)40-1/4” (102.2 cm)2517-1/8” (43.5 cm)20-1/8” (51.1 cm)
Built-In Wall Custom VentilatorSystem Dimensions (VBCV/CVBCV Models)D5-1/2"(14.0 cm)10" (25.4 cm)dia. duct location5/8" (1.6 cm)C1200 or 1500 CFM Exterior or In-Line Ventilator Installation48”, 60” W. ModelsD5-1/2"(14.0 cm)10" (25.4 cm)dia. duct location5/8" (1.6 cm)C1200 CFM Interior Ventilator Installation36”, 42”, 48”, 60” W. ModelsC36”42”48”60”W.W.W.W.D34-1/4” (87.0 cm)40-1/4” (102.2 cm)46-1/4” (117.5 cm)58-1/4” (148.0 cm)36”42”48”60”26W.W.W.W.17-1/8” (43.5 cm)20-1/8” (51.1 cm)23-1/8” (58.7 cm)29-1/8” (74.0 cm)
Planning InformationProper installation of ducting is extremelyimportant to ensure maximum performance fromany ventilation product. All CFMs are based on tests at 0.1 staticpressure: without applying static pressure, CFMwould be greatly overstated. Straight runs and gradual turns are best; forexample, each 90º elbow is equivalent to 5-10feet (1.52-3.05 cm) of straight run. Never use flexible duct; it creates back pressure/airturbulence and greatly reduces performance. Proper performance is dependent on properducting; make sure that a qualified and trainedinstaller is used. Check with a qualified and trained installer orlocal codes for makeup air requirement, if any. Max. amp rating for hoods includesrecommended ventilator kit rating; all productsmust be hard wired direct with 2-wire with ground.Roof Cap7” round duct300 or 600 CFMsingle blowerinterior-powertypical ductworkDuct cover or soffitHoodRoof cap10” round duct1200 CFMsingle blowerinterior powertypical ductworkDuct cover or soffitPlan where the duct work will be located. Installproper-sized duct work, and roof or wall cap for thetype of blower you are using. Recommended hoodlocations for the most common installations areshown. Adjust your measurements for various heightsof ceilings, soffits, cabinets, or ranges/rangetops.HoodExterior blower10” round duct900, 1200, or1500 CFMexterior powertypical ductworkCheck FramingDuct cover or soffitHoodWall CapDuctWall Installation exteriorpower typicalductworkDuct cover or soffitHotteNOTE: Because of the weight of the hood make surethat the mounting screws are driven into the framingand not just the drywall. It may be necessary to drilladditional holes in the canopy for proper alignment.NOTE: Wall exhaust must be a minimum of 24” (61.0 cm)from ground. This may vary depending on local codesand geographic location.27
Installation (VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)21Check damper for unrestricted movement, adjust ifnecessary.Attach transition to damper. Seal with aluminum tape.WARNING3To reduce the risk of fire, electric shock, or injury topersons, observe the following: Use this unit only in the manner intended by themanufacturer. If you have any questions, contactthe manufacturer. Before servicing or cleaning unit, switch power offat service panel and lock service panel to preventpower from being switched on accidentally. Whenthe service disconnecting means cannot be locked,securely fasten a prominent warning device, suchas a tag, to the service panel.Flip hood over and remove electrical box cover.54121Insert 6” of electrical wiring through the top of vent hoodand secure using wiring restrain. Refer to local codes.Slide duct over transition and tape around joint.28
6Nut driver5/16”5/16”Nut driverCAUTION: If not using a duct cover, using screwsprovided, make sure top mounting screws are securedinto soffit or cabinet framing. Use additional mountingscrews, if necessary.CAUTION: Secure vent hood to wall using screwsprovided. Use additional mounting screws and wallanchors, if necessary.78Bare or Green112GreenBlackWhiteBlackWhiteConnect black to black, white to white, and thegreen/bare wire under the green screw.NOTE: Housing wiring must be properly installed forwiring to be correct when wiring unit.Replace electrical box cover. Make connection tobreaker box.1091113322Slide filter front over front lip. Push filter rear up, thenslide back over rear lip.Slide filter front over front lip. Push filter rear up, thenslide back over rear lip.29
Duct Cover Option(VWH/CVWH 10”H./12”H. Wall Hoods w/Standard Ventilator)12Measure distance from ceiling to canopy.2Slide the duct cover in place and fasten from insidecanopy using the sheet metal screws provided.Installation(VWH/CVWH 10”H./12”H. Wall Hoods w/Recirculating Kit)12Remove damper and discard with transition.Turn recirculating unit upside down. Place vent hoodupside down on recirculating unit.30
Installation(VWH/CVWH 10”H./12”H. Wall Hoods w/Recirculating Kit)34Attach with screws
non-Viking Range ventilator kit will void the hood warranty. Viking hoods are equipped with the variable speed controls for blowers. These units will not function with a single speed ventilator. All Viking ventilator kits are designed specifically for use with Viking hoods. Use of any non-Viking ven
All 13 Layouts use White Daisy CS for bases, so you will need 26 sheets for your layouts. Whisper CS #3 4 x 12 Layout B 4 x 12 Layout B 4 x 12 Layout C Whisper CS #4 4 x 12 Layout C 4 x 12 Layout C 4 x 12 Layout C Saffron Letter B&T #1 (letters facing sideways) 6 x 10 ½ Layout A 6 x 8 Layout A 6 x 4 Layout K 6 x 1 ½ Cricut
Oct 30, 2014 · EE501 Lab 6 Layout and Post-layout Simulation Report due: Oct. 30, 2014 Objective: 1. Practice analog layout techniques 2. Practice post-layout simulation Tasks: 1. Layout the two stage amplifier designed in Lab 4(As shown in Fig 1) Common centroid layout of the fi
1 Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating a Layout Template Creating a Border and Title Block Sending Floor Plan Views to Layout Sending Elevation Views to Layout
process or functional layout and combination or group layout. Each kind of layouts is explained with respective advantages, disadvantages and application as under. 1. Fixed or Position Layout Fixed or position layout is also known as project layout. A typical fixed layout is shown in Fig.1.1. In this
Creating a Border and Title Block 3 To use a custom layout template 1. Select File Open Layout and browse to your custom layout template file. 2. When the new layout file is open, select File Save As.In the Save Plan File dialog: Click the Save in drop-down and browse to the folder where the plan that you intend to send views to the layout is saved.
shop or a process layout. Each cell in the CM layout is formed to produce a single part family, that is, a few parts with common characteristics. Combination or hybrid layout: It is difficult to use the principles of product layout, process layout
Virtuoso Layout Editor This tutorial will cover the basic steps involved in using the Cadence layout editor called Virtuoso, extracting layout, and running simulation on the created layout. The inverter layout is used as an example in the
INTRODUCTION 5 562, 579, 582, 585, 591, 592, 610). Population genetics, for example, identifies the conditions—selection pressures, mutation rates, population
