INTRODUCING - Newmar DC Power
INTRODUCINGPTMP SERIESMODULAR /PROGRAMMABLE“VERY SMART”BATTERY CHARGERSBattery Chargers Inverters DC Converters Power SuppliesDC Power Conditioners DC Power Stabilizers2016 Power Catalog
PTMP Chargers - 24V Modular Programmable Programmable: Battery Types Operating & Alarm Parameters Self-Monitoring/Diagnosis Reported On-Screen: Operational Data Out of Limit Conditions Component Fault Identification Form C Remote Monitor Relay Outputs; AC Fail, DC Voltage Low/High Onboard Serviceability: Plug-In Replacement Components Charger Remains Insalled On Vessel24 Volt, 150 AmpThe PTMP represents a new level of functionality, reliability, and serviceability in very smart battery charging for critical24 volt systems aboard work boats, military, commercial, and recreational craft. A menu of pre-programmed battery typecharge profiles as well as custom settings option allow user to select or program optimal three step charging voltages andoperating parameters. The chargers interact with batteries providing the ideal profile for replenishment and conditioning,resulting in maximum performance and extending service life.LCD screen diagnostics and system status and alarm conditions, plus remote alarm contacts improves reliability as operatorsare kept apprised and forewarned of potential system issues. The LCD monitor indicates nature of the service required, yet thecharger will rarely need to be removed from the vessel! The front panel hinges upward allowing access to the power moduleand controller circuits which can be easily removed, and a replacement quickly plugged back in place, specialized techs notrequired, minimizing down time and service labor expense.Reliability is further enhanced on the 100 and 150 amp systems via use of multiple power modules, should one fail the systemwill signal a fault but continue to operate at reduced power output.Features User selection of Pre-programmed charge profiles formultiple battery types. Plus full customization for specialrequirements On-screen status and system diagnostics, with audio alam Independent temperature sensors, 3 battery banks 21 day automatic re-conditioning cycle IP54 water and dustingress protection Equalization programPTMP Model24-5024-10024-150Input Amps(115V/230V AC)14/828/1642/2450100150Banks Multiple modules provide redundancy and qualifies asredundant ABS essential service device (100 &150 amp models) Easy front panel access to plug-in modules for quick fieldservice, no need to remove charger from vessel, hightech personnel not required 3 step charging for long battery lifeOutput Amps Remote Status monitoring via Form C relay contacts333Size (Inches)23 x 10 x 723 x 10 x 723 x 12 x 7Weight (Lbs.)283035DC Power Onboard1Newport Beach, CA USAwww.newmarpower.com 800-854-3906
PTMP Chargers - 24V Modular ProgrammableOperation Status ScreenA 2” x 2.6” Front panel LCD screen provides system status information:System StatusVOLTS - BANK # 12327.2 27.0 27.5TOTAL OUTPUT AMPS 100CHARGER MODE ON - FLOATBATT TEMP BANK 12372 80 77 DC volts per battery bank Recondition cycle in process Total charger output amps Absorption stage timed out Charge stage mode (bulk, Equalize mode time remainingabsorption float) Alarm conditions (see self Battery temperature (per enableddiagnostics section below for list oftemp probe)alarm monitored functions)ProgrammableEnter charge profile for multiple battery types, and monitoring parameters viafront panel key pad, LCD screen or by laptop connection.BATTERY CHARGERAC FailureCharger Over TempBattery Over TempHigh Charger Voltage OutputLow Charger Voltage ENTER*Programmable by key pad or laptopInternal Power Module over tempInternal Power Module FailureFan failureOutput Fuse FailureForm C Remote Monitor Relay Outputs AC Fail DC Voltage Low/High (set points programmable)ReliableHardened for marine environment: IP 54 rating: protected from dust andsplashing water Cooling air flow ducted to minimizecontact with power circuit componentsqqMENU / BACKSelf-Monitoring/DiagnosisDisplayed on-screen with audio alarm when critical condition detected: qCustom settings include: Absorption & float voltage Absorption stage time Absorption stage end amps Bulk stage time out Max charge amps (AC input limit) End of Absorption condition Hi/Low DC alarm voltagesqBattery program selections include: Flooded Cell 1 AGM Flooded Cell 2 ( AGM 2) Gel TPPL (Thin Plate Pure Lead)System Normal ScreenSystem StatusVOLTS - BANK # 12322.0 24.8 25.0TOTAL OUTPUT AMPS 0CHARGER MODE OFF/FAULTBATT TEMP BANK 123128 72 80Battery # 1 Over Temp Conformal coated circuit boards High temperature rated circuits to 50 C Automatic power reduction in hightemp environmentsAlarm Condition Screen Redundant power modules ensure continued operation should one fail(100 and 150 amp models)On-Bulkhead ServiceabilityOn-screen diagnostic define fault conditions. Hinged front panel access to internal modularplug-in circuits makes replacement easy without removing charger from installed location. Module change-out takes onlyminutes via plug and playconfiguration Technical personnel not required No need to remove the chargercase from the boatOptions Remote installation of LCD display and touch pad. Battery Temperature Sensors.BATTERY CHARGERENTER*MENU / BACKBattery Temp. SensorRemote PanelFront panel pivots up providingaccess to plug-in modules allowingeasy onboard serviceDC Power OnboardNewport Beach, CA USAwww.newmarpower.com 800-854-39062
Battery Chargers - Phase Three Series12 VoltTYPE APPROVED PRODUCT“Smart” battery charging technology for 12, 24 and 32 volt systems aboard workboats, military vessels,commercial vessels, and recreational craft. These chargers interact with batteries providing theoptimum three stage charge process for fast recovery and conditioning, maximizing performance andextending battery life.Features “Smart” circuitry provides three stage charging:bulk, absorption, float Gel-Cell/Flooded Lead-Acid/AGM battery typeswitch selects optimum charge/float voltages Optional sensor adjusts output voltage based onbattery temperature (except PT-7) Current limiting prevents damage from overloading Use as a power supply - can power loads without abattery in-line ABS Type Approved battery charger andpower supply PT-MCU Control/Monitor optional (see page 6)24 & 32 VoltInstallationwith optionalPT-MCUControl/MonitorTYPE APPROVED PRODUCTDC Power Onboard3Newport Beach, CA USAwww.newmarpower.com 800-854-3906
Battery Chargers - Phase Three Series12 VoltPT-7PT-14W88-132 /Input VACPT-40UPT-8090-26490-26490-132 /85-64176-264PT-25W180-264Max Output Amps714254080Output -3A-58/48.2/4Battery Capacity(Amp-Hours)Case Size Ref.Weight; Lbs./Kg.3.2/1.5Temp Sensor TypeN/ARemote Panel ModelN/ATCS-12/24 ons AccessoriesRemote Panel, model RP (applicable tomost models, see matrix)LED’s indicate charger output stagePT-MCU Control/Monitor AC input breaker Output voltage adjust Digital DC volt meterwith alarmTemperature Compensation SensorSee matrix for applicable type percharger model: TCS-12/24 or TP AC fail contacts (seepage 6 for specs.)3” x 4.75”TCS-12/24TP SensorCase .56.3A-4159.86.1A-515.89.66.1A-619.5128.224 VoltPT-24-8WInput VAC85-264PT-24-13W90-132 /180-26432 -26490-264207-25390-264104-126Max Output Amps8132045609525Output 0-250Battery Capacity(Amp-Hours)Case Size Ref.A-2A-2A-3A-5A-6A-6A-4Weight; 12/24TCS-12/24TPTCS-12/24TPN/ARPN/ARPN/ATemp Sensor TypeRemote Panel ModelTCS-12/24 TCS-12/24RPRPDC Power OnboardNewport Beach, CA USAwww.newmarpower.com 800-854-39064
Battery Charger - Phase Three Series ModularThe PTMS charger provides a significantimprovement in DC system reliability by utilizingmultiple independent charger modules that pluginto the bulkhead mounted case, and should afault occur in one module, the system continues tooperate, thus is considered "fault" tolerant.TYPE APPROVED PRODUCTThe system consists of a wall mount case which serves as connectionpoint to AC input and 24V, 3 battery bank output and contains threefront-facing power bays, each accommodating a 22.5 amp chargermodule which slides and locks in place creating a 24V, 67 ampcharger. If a module fault occurs, a front panel indicator and alarmrelay is activated and the system continues operating on the othermodules.A fourth bay houses the "smart" controller circuit that provides 3 stepcharging, battery type selector switch, temperature compensation,system status LED's, alarm contacts and indicators. Should thecontroller suffer a fault, the charger will still operate at full power atfloat voltage mode. The controller module is also configured for easyplug-in replacement in the field.Vessel operators appreciate this system approach to reliabilityand serviceability whereby a fault in one of the modules is easilyidentified and it can be quickly replaced with an on-hand spare oran exchange unit from the factory, all the while the charging systemand the vessel continue to operate.Redundant, independant charger modulesincrease reliability - if one malfunctions, theremaining modules continue to operate.System SpecificationsInput Voltage/Frequency: 90-264 VAC, 47-63 Hz,Battery Type Selector: Lead Acid/AGM/Gel-CellBattery Banks: 3Temperature Compensation Sensor (Optional):Model: TCS-12/24Status IndicatorsOutput OK, No Output, Check System, Battery Too Hot,Total Output Bar Graph,Remote Monitor Outputs (Form C): AC Fail/Module Fail/Low VoltageTemperature Rating0-60 C; derate linearly from 100% output @ 50 C to 80%output @ 60 CEngine roominstallation.MechanicalCase Material: Powder Coated Stainless SteelCooling: Forced air per moduleCompliancesABS type approved redundant power system for essentialservices and as a battery charger, CE Mark, UL RecognizedPower ModulesModelPTMS-24-67Articulated tug barges utilize PTMSChargers to maintain batteries andsupply power to essential services.DimensionsWeight@ 115/230 VAC(H x W x D)Lbs.18/920.9” x 10.9” x 8.8”35ModulesMax OutputMax Input AmpsInstalledAmps @ 24V367DC Power Onboard5Newport Beach, CA USAwww.newmarpower.com 800-854-3906
PT-MCU & ABC Series Battery ChargerPhase Three - Monitor/Control UnitDesigned for installation in conjunction with most models ofPT Battery Chargers, this unit provides additional functionality inTYPE APPROVED PRODUCTmonitoring, control, and alarms. It contains a 3 battery bankDigital DC volt meter, a PT charger float voltage adjustment, and AC Mastercircuit breaker for control and protection of charger input power.A 10 foot wiring harness is provided for AC input and DC monitor wiring to thecharger. The unit carries ABS type approval for Charging Systems, thus providingfull compatibility when paired with PT chargers which are also ABS Typeapproved.Features Digital readout of 3 battery bank voltages to 1/10th volt DC high/low voltage alarm with adjustable set-points Output float voltage adjustment pot; permits fine tuning from-4% to 5% AC failure Form C contact (120/240V AC) AC circuit breaker (30A, double pole) provides overcurrentprotection and manual disconnectPhase Three Charger AC power ON indicator lightPT-MCUBATTERY CHARGER MONITOR AND CONTROL*MODEL PT-MCU 10' wiring harness for easy connection of PT Series ChargerONAC POWERNOMINALFLOATVOLTAGE Compatible with: PT-14W, PT-25W, PT-40U, PT-80, PT-24-8W,PT-24-13W, PT-24-20U, PT-24-45U, PT-24-95U, and PTMS-24-67OFFDC VOLTAGEADJUST * FOR USE WITH BATTERYADJUST FLOAT VOLTAGE ONLY WHENBATTERY IS CONNECTED AND WITHLESS THAN 2 AMPS CHARGER OUTPUTOptionsNEW ARWNEWPORT BEACH, CA. USATEL: (714) 751-0488FAX: (714) 957-1621e-mail:techservice@newmarpower.com Remote relay for Hi/Low voltage alarms(model DIR)CHARGER MODELSEQUIPPED WITH JACK TOACCEPT MODEL TCS-12/24TEMPERATURE COMP.SENSORBATTERYVOLTAGEPROTECTION: IP21To Ship’sAC Power Wires harness to lengthModelPT-MCUSize H x W x DWeight8.7” x 4.6” x 5.5”5.5 Lbs.ACInputNote: Use of PT-MCU eliminates use oftemperature compensation sensor. -ABC Series Battery ChargersThe ABC-25 charger utilizes time tested SCR charging circuitry,individually sensing and regulating each of 2 isolated battery banks,allowing the user to leave the charger operating indefinitely, evenunder no-load conditions without fear of overcharging. These chargersare ideal for vessels which have an intermittent demand for batterypower.Features Total output ammeter 115/230 VAC input Dual independently regulatedoutput banks Auto-reset thermal overloadprotection On-off switch and power "on"indicator light Conformal coated circuit board Convection cooled case, nofans. Ideal for high moistureenvironments Vibration absorbingmounting grommets Powder coat aluminum caseInputVoltsBanksAmpsDimensions(H x W x D)Weight105-125 VAC or 210-250 VAC, 50-60Hz5/2.51222511.9” x 4.7” x 6.2”14 Lbs.ModelABC 12-25OutputAmps@ F. L.DC Power OnboardNewport Beach, CA USAwww.newmarpower.com 800-854-39066
InvertersThe PS Series inverters produce high efficient, pure sine wave output from 12 or 24 volt battery input with high surge powerfor motor start. A power saving mode, with user friendly adjustable set points, conserves batteries when not in use. A remotecontrol/display panel and front panel indicator lights allow for easy system monitoringand control.Features 1000, 1500, 2000W models Pure sine wave 115V output High efficiency 90% Power saving mode conserves batterywhen not in use, user adjustable set points AC duplex outlet on front panel Status indicator lights on front panel: Input voltage Output power level1000 Watt Power mode Fault status Remote control/display included Protection: Low input voltage OverloadRemote PanelIncluded Short circuit Over temp Meets UL458 Rugged and compact aluminum case,ideal for marine applications2000 WattTrue Sine Wave(T)Pure Sine Waveoutput for interference freeoperation of electronics.Power entertainment systemswithout running generator.Make a pot of coffee whenAC power is not available.AC Weight(Lbs.)12-1000 PS12V1000W2000W3.46”7.17”15.1”8.812-1500 PS12V1500W3000W3.46”7.52”16.34”10.512-2000 PS12V2000W4000W6.53”8.22”14.5”12.224-1000 PS24V1000W2000W3.46”7.17”15.1”8.8DC Power Onboard7Newport Beach, CA USAwww.newmarpower.com 800-854-3906
Inverter-Chargers - Torque SeriesTQ Inverter-Chargers deliver pure, sinusoidal AC for flawlessoperation of all appliances and sensitive electronics. These unitsare ideal for entertainment systems, and computers and othermicroprocessor based equipment which are intolerant to ACwave distortion. They provide peak power for motor starting,and high continuous duty ratings.Whenever shore or generator AC power is available, a built-inautomatic transfer switch activates the multi-stage, temperaturecompensated battery charger providing rapid and safereplenishment of the inverter battery bank. AC input currentlimit in charging mode can be programmed to match availableshore power, thus preventing tripping the dock breaker.A front panel Diagnostic monitor panel provides system status,and an optional LCD remote display is available.Features Pure sine wave provides distortion free AC output Built-in high output, 3 stage charger for rapid battery bankreplenishment - programmable for gel-cell, flooded leadacid or AGM battery type with automatic temperaturecompensation sensor Programmable AC input power limiting avoids nuisancetripping of shore power breakers when limited poweris available Rugged heavy duty case and power componentsMilitary tugs utilize inverters as AC UPSas back-up to on-board generators. UL listed Optional: Remote LCD Monitor & Control PanelModel: TQ-DSP-12/24Programmable AC input power limit avoids shorepower breaker trip in charge mode.5.75” x 00TQ-243600TQ-24Inverter Sine Wave Output:Watts (Surge)1,5002,5004,5005,5005,0008,000Watts (Continuous)1,0001,5002,0003,0002,4003,60010.5 - 1710.5 - 1710.5 - 1710.5 - 1721 - 3021 - 12V150A@12V75A@24V90A@24VInverter Input:VDCMax. AmpsCharger Input: 95 - 135V AC, 60 Hz.Max. AmpsCharger Output:Max Amps @ VCase (H x W x H) inches:Case Size Ref.12 x 14 x 612 x 14 x 614 x 14 x 615 x 16 x 812 x 15 x 614 x 17 x 8Weight (Lbs.)404040684068DC Power OnboardNewport Beach, CA USAwww.newmarpower.com 800-854-39068
DC UPSElectronics require a clean and reliable source of DC power for proper operation, they are highly vulnerable to shut down /reboot / data corruption caused by power drop out during engine start and low voltage from over worked batteries. RFInterference generated by alternators and motors also impedes proper operation.A DC UPS is the remedy to these issuesBelow are several choices of DC UPS solutions, depending on the type, duration, severity of power issue encountered, and levelof protection desired.Protection During Engine StartStartGuardThis unit has an internal battery that supplies supplemental power to electronics during theengine cranking cycle when there is an abrupt voltage drop caused by the high amperage drawof the starter motor. A sense wire connected to the start switch brings the battery online wheneverthe engine is cranked. This prevents reboot, memory dump, and loss of data in GPS, sounders, andradios.ModelNS-12-20Input12VOutput12V, 20ASize (H x W x D) Weight8.25” x 4.9” x 3.5” 5.5 Lbs.Back-Up20 Amps for 1 min.Continuous ProtectionThe Nav-Pac and MDP contain an internal battery that supports electronics when primary input power falters or altogetherfails.Nav-Pac Mobile Data Power Internal 5AH battery Internal 7AH battery Recharges directly fromprimary voltage source Internal 3 stage charger maintainsbattery in peak condition Filters electronic interference Filters electronic interference absorbsline voltage spikes Absorbs line voltage spikes Available in 12 volt, 20 ampand 24 volt, 15 amp modelsModelNP-12NP-24Input12V24VOutput12V, 20A24V, 15ASize (H x W x D5.25” x 6.2” x 7.5”6” x 6.75” x 7.5”Weight6 Lbs.8 Lbs. Low voltage output signal interfaces withMotorola work stations and videorecorders initiating orderly shutdown. Programmable timer disconnects load from battery atspecified time after ignition shut off 25 amp load ratingModelMDP-25.0Battery Back-Up12V24V8A for 15 min.8A for 15 min.12A for 8 min.12A for 8 min.18A for 2 min.15A for 2 min.20A for 1 min.---------------------Input12VOutput12V, 25ASize (H x W x D)5.75” x 6” x 8.5”Weight10Battery BackUp25 amps for 8 min.10 amps for 20 min.5 amps for 60 min.Redundant Power Source IntegrationAutomatic Power Selector (APS)The APS enables integration of a redundant power source to critical electronic loads.It automatically selects the higher voltage of twoindependent DC power sources and routes that sourceTypical Installationto the load. Should one source falter or fail, the otherwill automatically supply the load with no transferInIndelay, thus operation continues uninterrupted.Battery orPower Supply 1Battery orPower Supply 2Critical LoadsModelMax LoadsSizeWeightAPS-7070 Amps3.25” x 4.5” x 3.1”2 Lbs.APS-160160 Amps9.0” x 4.5” x 3.1”5 Lbs.DC Power Onboard9Newport Beach, CA USAwww.newmarpower.com 800-854-3906
DC UPSIntegrated Power SystemThe Integrated PowerSystem (IPS) is aunique multifunctionpower supply whichincorporates builtin battery back-upand numerous poweraccessories within arackmount chassis.The internal batteriesare always in-line withthe load, thus there is nointerruption in the event of AC loss. Batteries are recharged when AC is restored. A manual battery disconnect switch allowsinternal or external battery service or replacement while the system is running.Features Precision regulated power supply simultaneouslymaintains batteries at peak charge and suppliessystem load Built-in batteries instantly power load during AC failure no switch-over delay. Input terminals provided forintegrating additional external batteries for increasedback-up capacity (except IPS-12-40) Automatic low voltage and manual battery disconnect Numerous front panel monitors--L.E.D. status indicatorsand digital ammeter/voltmeter Form C summary failure alarm contactsIntegrated Power System provides primary and back-uppower to critical navigation and safety systems. 19" or 23" rack mount, flush or 6” forward mounting Input 115/230V AC, 50-60 talInput PortsInternalBatteryCapacityGroundReferenceIPS 12-4013.610 - 15V DC40N/A20 A-HNegativeIPS 24-2227.220 - 30V DC2240 Amps10 A-HNegativeIPS 48-1154.440 - 60V DC1140 Amps5 A-HPositiveModelSize and Weight (All Models): 3.5” H x 17” W x 18” D, 33 Lbs. (with batteries)Power-PacThe 12 volt supply features built-in back-up batteries which arecharged during normal operation and then continue to power radioswhen AC power is lost. Power Supply Output: 13.6V, 10 amps intermittent,5 amps continous Low battery alarm and disconnect Aux. input terminals for integrating additional external batteriesfor increased back-up capacity 115/230V AC inputModelsRun Time on Internal BatteryBatterySize (H x W x D)WeightPP-77 AH5.3” x 9.0” x 10.5”18 Lbs.PP-1414 AH5.3” x 9.0” x 10.5”24 Lbs.7 A/H Battery Installed14 A/H Battery Installed7 amps for 40 min.7 amps for 100 min.10 amps for 20 min.10 amps for 60 min.DC Power OnboardNewport Beach, CA USAwww.newmarpower.com 800-854-390610
DC Converter - Standard & Isolated SeriesStandard SeriesConvert 20-50 VDC input to 12 or 24 VDC negative ground output forpowering communication/navigation equipment, on negative groundsystems. Ideal for powering voice, data and navigation electronics inmarine applications.Features Excellent Regulation: Output voltage maintained within 1%under all line and load conditions Heat generated by semi-conductors is extracted and dissipatedby large heat sink fins that maximize air contact for cool operationand long life of components Conformal coating on PC boards and corrosion-resistantpowder coated aluminum case with heavy dutyshock mounts assure survival in hostile environments StandardOutputSizeWeight Current limitingModelVoltageInputVoltageInter.Cont.(H x W x D)(Lbs.) Automatic thermal shutdown24-12-317 - 3213.63A3A4” x 4” x 2”1 Short circuit proof32-12-620 - 5013.66A6A3” x 5” x 11”3 Reverse polarity and overvoltage protection32-12-1020 - 5013.610A10A5” x 6” x 11”5Options32-12-1520 - 5013.615A15A5” x 6” x 11”5 Operation as a battery charger or parallelredundant operation (contact factory)32-12-2520 - 5013.625A20A6” x 5” x 14”832-12-3520 - 5013.635A30A6” x 5” x 16”12 24V output32-12-5020 - 5013.650A40A7” x 7” x 19”16Isolated SeriesThe Isolated Series provides voltage from conversion as well as input/output isolation, allowing use of negative ground gearwith positive or floating ground battery systems, or vice versa. May also be used as 12 or 24 volt stabilizers for electronics thatare highly sensitive to input voltage fluctuation.Using an Isolated Converter as a voltage stabilizer on 12 or 24 volt systems can solve conducted noise and interferenceproblems on sensitive DC powered devices for communication, navigation systems and DC micro-processor based electronics.Features Polyurethane conformal Wide range of input voltagecoating on PC board Precise output voltage regulation Rugged case designed for Reverse polarity protectionhigh vibration applications Total input/output isolation, pos.or neg. groundOptions Current limiting, short circuit Operation as a battery chargerproof outputor parallel/redundant operation Automatic re-setting(contact factory)thermal shutdown High/low input voltage shutdown 24 VDC output (contact factory)IsolatedModelInputOutputOutput AmpsVoltageVoltageInter.12-12-12I10 - 1613.612-12-35I10 - 1613.648-12-6I*20 - 5613.6648-12-18I*20 - 5613.61848-12-35I*20 - 5613.63520SizeWeightCont.(H x W x D)(Lbs.)1285” x 6” x 14”635206” x 7” x 17”1265” x 6” x 8”7105” x 6” x 14”86” x 7” x 17”12* Available in 24V output, contact factoryIsolated converters in parallel/redundantconfiguration deliver noise-f ee and regulatedvoltage to propulsion system controllers.DC Power Onboard11Newport Beach, CA USAwww.newmarpower.com 800-854-3906
Step-Up Converters & DC Power StabilizersDC Converters - Step-Up SeriesThese "UP" converters produce 24 volts from 12 volt systems and are ideal for managing dual voltage applications withouthaving to install a 24 volt battery and dedicated charging system. Choose from two types depending on your application.Standard, non-isolated where input and output share common ground reference, and isolated where input and output aregalvanically separated.Standard, Non-Isolated Series Intended for use on negative ground systems 10 -15V DC input range Available in 7, 16 and 25 amp outputs Current limited, voltage spike suppression, automaticthermal shutdown and recoveryIsolated Series Allows positive/negative ground compatibility between12V battery and 24V accessories Input/output isolation 250V DCStep-Up ConvertersModelInputVoltageOutputVoltageAmpsSize(H x W x D)Weight(Lbs.)12-24-16Step-Up DC ConverterStandard - Non-Isolated12-24-710 - 1527.274” x 4” x 2”1.412-24-1610 - 1527.2168”x 13” x 24”3.3512-24-2510 - 1527.2256” x 7” x 17”4.112-24-6I10 - 1624.565” x 6” x 14”612-24-18I10 - 1624.5186” x 7” x 17”12Typical Standard Application24V DCElectronicsIsolated12V DC12 VOLTBatteryDC Power StabilizersFeed sensitive electronics with clean and proper voltage regardless of battery condition. These stabilizing converters providecontinuous, precisely regulated output free of conducted noise over the entire range of a battery’s usable voltage, thuseliminateing fluctuating input voltage and noise which can cause shutdown, diminish performance and possibly damagesensitive circuitry.DC Power StabilizersOutputInputVoltageVoltageAmpsSize(H x W x D)Weight(Lbs.)12-12-3I10 - 1613.634” x 4” x 2”112-12-6I10 - 1613.664” x 4” x 2”112-12-12I10 - 1613.6125” x 6” x 14”612-12-35I10 - 1613.6356” x 7” x 17”1224-24-3I20 - 3227.236” x 7” x 17”1224-24-7I20 - 3227.277” x 4” x 2”248-24-9I20 - 5624.595” x 6” x 14”848-24-18I20 - 5624.5186” x 7” x 17”12ModelIsolated12-12-35IStabilizing DC Converter24 Volt System12 Volt SystemInputInput30 VDC16 VDCOutputOutput10 VDC13.6 VDC20 VDC27.2 VDCDC Power OnboardNewport Beach, CA USAwww.newmarpower.com 800-854-390612
Heavy Duty Power SuppliesThese super-rugged DC power supplies are ideal forpowering 12 and 24 volt communication/navigationequipment onboard commercial vessels wherereliability is essential. The proven linear circuit designprovides pure noise free output and long service life.Features Excellent Regulation and Ripple Spec:Output voltage maintained within 1% under allrated line and load line and load conditions.Provides solid power source for electronics Polyurethane conformal coated PC board andcorrosion resistant heavy duty aluminum casewith integral shock mounts assures survival inhostile environments Heat generated by semi-conductors is extracted anddissipated by large heat sink fins for cool operation Protection: over-voltage, current limit;(set @ 105% of intermittent rating), thermaloverload and input/output fusing Thermally activated cooling fan on “CD” units 115/230V AC, 50 - 60Hz. inputOptions Modify for use as a Battery Charger Output voltage adjust Transfer relay for back-up battery inevent of power failure (ERC option)Commercial Vessels of all types utilize these heavy duty power supplies to assurereliable operation of communications and navigation electronicsOutputModel12 Volt115-12-8Dimensions (H x W x D) WeightVoltageAmps Inter.*Amps Cont.13.6V DC85Inches6.04.6Lbs.8.510115-12-20A13.6V DC2085.74.816.320115-12-35CD13.6V DC35356.59.514.032115-24-1024.5V DC1045.74.816.320115-24-18CD24.5V DC18186.59.514.032115-24-35CD24.5V DC35356.513.018.756024 Volt* Intermittent: 20 minutes max on time, 20% duty, Continuous: 24 Hours/Day 100% DutyDC Power Onboard13Newport Beach, CA USAwww.newmarpower.com 800-854-3906
DC Power OnboardSolutionsSectionPagesBattery Chargers:PTMP Series.1-2PT Series.3-4PTMS.5PT-MCU.6ABC Series.6InvertersPure Sine Series.7Torque Series Inverter/Chargers.8DC UPSStart-Guard, Nav-Pac, MDP & APS.9Integrated Power Supply and Power-Pac.10DC ConvertersStandard and Isolated.11Step-Up and Stabilizers.12Power SuppliesHeavy Duty Series.13If you need product application assistance,please contact Jim “Kap” Kaplan,your marine DC Power specialist at Newmar.E-mail: kap@newmarpower.comDirect: 714-619-3461
www.newmarpower.comP.O. Box 1306 Newport Beach, CA 926632911 W. Garry Ave, Santa Ana, CA 92704Phone: 714-751-0488 Fax: 714-957-1621E-Mail: sales@newmarpower.comCopyright 2016 Newmar, All rights reserved.Distributed By:
24 Volt 32 Volt PT-24-8W PT-24-13W PT-24-20U PT-24-45U PT-24-60W PT-24-95U PT-32-25 Input VAC 85-264 90-132 / 180-264 90-264 90-264 207-253 90-264 104-126 Max Output Amps 8 13 20 45 60 95 25 Output Banks 3 3 3 3 3 3 3 Battery Capacity (Amp-Hours) 16-80 26-130 40-200 90-450 120-600 180-950 50-250 Case Size Ref. A-2 A-2 A-3 A-5 A-6 A-6 A-4
With your new RV purchase, Newmar provides a 12-month limited warranty. Please read the Newmar Limited Warranty and all other component warranties . 2013 Dutch Star Diesel Pusher by Newmar 10 Microwave (GE) Midwest Sales .574-287-3365 Range Atwood-Greenbrier .815-877-5700 .
Again, thank you and welcome to the Newmar family. . the purchase of your new coach and you have not received your Newmar Owner’s Warranty Card, please contact your selling dealer or the Newmar Warranty Department at 800-731-8300. . This
Newmar Express Limited Warranty For your protection and peace of mind, we at Newmar back your Mountain Aire Diesel Pusher with one-year/unlimited-mileage warranty coverage: The Newmar Express Limited Warranty. Ask your dealer for an explanation and a copy of the warranty’s compl
optional Spartan‚ 370 ISL engine the enticing exterior graphics with the option . Newmar is an industry leader in applying full body paint to its coaches. We are pleased to offer it as an option on your Dutch Star Diesel Pusher. A B C . 50-amp Electrical Service with Fle
Aug 28, 2002 · the Kountry Star to cover every mile in luxurious comfort and classic style — to make contact, and at . NEWMAR’S TRUE . There are many benefits for our members to enjoy including the Klub m
NewMar Pt-2440 Battery charger NewMar PT40 Battery charger (4) 8-D Batteries (2) Group 31 Batteries Sea Star hydraulic Steering Wesmat stabilizer actuators Wesmar New/Waste oil tanks Oil Change transfer system Fuel supply/return manifold Anchor Yacht Sales Anchor Yacht Sales LLC
beauty and incredible endurance—a true work of art. Newmar is an industry leader in applying full body paint to its coaches. We are pleased to offer it standard on your Essex Diesel Pusher Motorhome. A. Windswept Pearl B. Pacific Blue C. Cactus Fern D. Mystic Sable C D The Essex is availa
Used throughout Newmar construction, Sikaflex elastic adhesive is one of the strongest bonding agents on the market today. It also serves as a sealant against air and water. And it helps dampen both sound and vibration. n. t. Newmar Express Limited Warranty For your protectio
