Arborite Postforming & General Purpose Laminate
ARBORITE POSTFORMING & GENERAL PURPOSE LAMINATESTECHNICAL DATAManufacturerArborite385 Lafleur, Lasalle (Québec), H8R 3H7Web site : www.arborite.com - Phone: 1-800-996-0366Alternate manufacturing facility – Fletcher, NCProduct DescriptionArborite decorative laminates are a high pressure thermoset plastic surfacing material. It consists of multilayers of kraft (core) papers impregnated with phenolic resins, covered by a melamine impregnateddecorative surface. These layers are then consolidated into a solid sheet under the effect of hightemperature and pressure.0.045" / 1.14 mmBasic Decorative High Pressure Laminates – for horizontal and vertical applicationsArborite decorative laminates are engineered to improve the product life cycle for wear, chemical andstain resistance under normal use and conditions. Available in 3 grades, Arborite laminates offer 4exceptional performance features, and are available in Arborite’s expressive range of colors.Arborite Flex 4 grades: 0.025" / (0.63 mm) - Arborite laminate type A3 0.034" / (0.86 mm) - Arborite laminate type A4 0.045" / (1.14 mm) - Arborite laminate type A5UsageFor all types of flatwork applications: work surfaces, counters, cabinets, furniture, equipment, food service, displays, caseworks, doors,walls, ceilings, window sills and frames, partition systems, enclosures, shelving and trims. suitable for most commercial, institutional and residential applications.Typical uses by grade:A3 (0.025") for light duty applications - most vertical surfaces such as interior doors, cabinet fronts, wallpaneling and similar surfaces.A4 (0.034") & A5 (0.045") for heavier duty applications – work surfaces, counters, table tops, cabinets,furniture, wall paneling, doors, window sills and similar surfaces.Arborite Postforming & General Purpose LaminatesRevised: September 20151
Arborite – FeaturesPostforming Feature – is the operation of forming decorative laminate into simple bends or shapes;Arborite decorative laminates provide flexibility as an attributed characteristic of our decorative highpressure laminate. This is done by uniformly heating the laminate to a temperature of approximately165 C (325 F) and pressing or bending it into the required shape before cooling. This requires rigidlycontrolled conditions and special equipment. Practically any shape consisting of simple bends can befabricated. A3 - will typicallypostform to a minimumradius of 6/16” face(outside bend)A4 - will typically postformto a minimum radius of7/16” face (outside bend)A5 - will typically postform toa minimum radius of 10/16”face (outside bend) Cold Bend – Arborite high pressure laminates can also be cold bend:o A3 can be cold bent to a 7" (177.8mm) radiuso A4 can be cold bent to a 9" (228.6mm) radiuso A5 can be cold bent to a 12" (304.8mm) radius Superior Wear Resistance – provides a tough, durable barrier against abrasion. ExceedsNEMA wear standards by up to 200% (color/pattern dependant). Superior Stain Resistance – a unique formulation which provides protection against :Staining agents such as: yellow mustard, gasoline (naphta), coffee, vinegar, householdammonia solution (10%), blue ink, tomato ketchup, citric acid solution (10%), povidone iodine(10%).Superficial staining agents such as: wax crayon, black shoe polish paste, black permanentmarker and #2 pencil. Superior Chemical Resistance – provides added resistance against the potentially damagingeffects of chemical agents. Please refer to the chart below for a summary of test results for themost commonly used chemicals and staining agents. Flame Spread and Smoke DevelopmentGradeA3A4A5Flame Spread(Canada)2245Smoke Development(Canada)1451Arborite Postforming & General Purpose LaminatesRevised: September 2015Flame Spread(USA)354040Smoke Development(USA)25125702
Arborite - Chemical Reagent Staining EffectsAcetic Acid (all concentrations)AcetoneAg Eosin Bluish 5% in AlcoholAlconoxAluminonAmmonium Hydroxide (all concentrations)Ammonium PhosphateAmyl AcetateAmyl AlcoholAqua RegiaAromatic AmmoniaBenedict’s SolutionBromothymol BlueButyl AlcoholCalcium Hypochlorite (concentrated)Camphorated para-chlorophenolCarbon DisulfideCarbon mic TrioxideCopper SulfateCresolCresol RedCrystal VioletDimethyl FormamideDioxaneEDTAEthyl AcetateEthyl AlcoholEthylene GlycolEucalyptolFormaldehydeFormalinFormic Acid (all concentrations)GasolineGentian VioletGlacial Acetic Acid, 99% (concentrated)Gram StainsHydrofluoric Acid 48% (concentrated)Hydrochloric Acid (all concentrations)Hydrogen Peroxide 3%IodineKarl Fischer ReagentKeroseneLactated Ringers /EMENEMESL/ENEMESENENENENENEMethyl MethacrylateMethyl OrangeMethyl RedMineral OilMonsel’s SolutionNaphthaNaphtHalenen-HexaneNigrosineNitric Acid (all concentrations)Perchloric Acid (concentrated)Petroleum JellyPhenol (all concentrations)PhenolphthaleinPhosphate Buffered SalinePhosphoric Acid (all concentrations)Picric Acid 1.2% (0.05M)Pine OilPotassium PermanganatePovidone IodineProcaineQuaternary Ammonia CompoundsSafranin OSilver NitrateSodium AzideSodium ChromateSodium Hydroxide (all concentrations)Sodium Hypochlorite 5%Sodium Sulfide 15%Sulfuric Acid (all concentrations)Sodium ThyiocyanateSucrose 50%Sudan IIITannic Acid (sat.)TetrahydrofuranThymol & AlcoholThymol BlueTincture of IodineTincture of MercurochromeTincture of MerthiolateTolueneTrichlorethaneTrisodium Phosphate 30%UreaUric Acid (sat.)Vegetable ESL/ENENELysolTMNEWright’s Blood StainMEMalachite GreenMethanolMethylene BlueMethylene ChlorideMethyl Ethyl KetoneEXPLANATION OF TEST RESULTS:NE: No EffectSL/E: Slight EffectME: Moderate EffectSE : Severe EffectNESL/EMENENEXyleneZephiran ChlorideZinc ChlorideZinc Oxide OintmentNENENENEArborite Postforming & General Purpose LaminatesRevised: September 2015Results may vary slightly by color. Request a sample forevaluation and chemical resistance testing.It is recommended that chemical spills be cleanedimmediately to prevent or greatly reduce the effects causedby longer exposure3
Arborite Surface TexturesArborite laminates are available in 12 standard surface textures:TexturesSurface Gloss Level *Breccia – an embossed finish offering sheen levels ranging frommatte to glossy10-50Cashmere – a fine, matte texture with a slight sheen8-12Diamond – a fine beaded texture which minimizes smudges, fingermarks and offers optimum scratch resistance.10-16Evergrain - a fine woodgrain texture with slight sheen6-7French Polish – a rich gloss and deep sheen that replicates theeffects of the finest wood finish36Gloss – a flat texture with a high sheen90-110Impression – a matte, pre-polish finish for those who appreciatestone’s essential nature11.2-12.5Laqwood – a slightly embossed woodgrain texture20-30Luminous – a softly polished stone texture that displays the effects ofgentle weathering55Metalux – a dimensional texture whose finely abraded directional linesconvey the luster and feel of brushed metal24-28Refined Matte – a smooth non-gloss finish resembling actual woodveneer3Structured - a highly embossed linear texture suitable for woodgrains,solids and linear patterns8-13Velvatex – a smooth furniture finish texture12-16Vista – a polished, glossy stone finish with a lustrous look* NEMA LD 3-200539-51Arborite Standard Sheet SizesArborite laminate are available in the following standard sheet sizes. Imperial Measure (feet)Metric measure (mm)4' x 8'1220 mm x 2440 mm4' x 10'1220 mm x 3050 mm5' x 8'1525 mm x 2440 mm5' x 10'1525 mm x 3050 mm5' x 12'1525 mm x 3660 mm30'' x 8'762 mm x 2440 mm30'' x 10'762 mm x 3050 mm30'' x 12'762 mm x 3660 mmGloss Surface Texture is only available in 4' x 8', 4'x 10', 5' x 12'French Polish Surface Texture is not available in 4' x 10'Luminous Surface Texture is not available in 4' x 10 and A5 grade is not availableMetalux Surface Texture is only available in 4' x 8', 5' x 12'Arborite Postforming & General Purpose LaminatesRevised: September 20154
Arborite Standard Decorative Laminates vs. NEMAThickness and WeightDescriptionThicknessWeight per squarefootA50.045” 0.005”A30.028” 0.002”A40.039” 0.001”0.324#0.180#0.245#Physical Properties of General Purpose Laminates – Arborite A5 gradeNEMA TestTypical Arborite Product type A5ThicknessAppearanceLight ResistanceCleanability (cycles)Stain ResistanceReagents 1-10Reagents 11-15Boiling Water ResistanceHigh TemperatureResistanceImpact ResistanceRadiant Heat ResistanceDimensional StabilityMachine DirectionCross DirectionSurface Wear Resistance(cycles)FormabilityBlisteringArborite Postforming & General Purpose LaminatesRevised: September 20150.045” 0.005”No ABC def.Slight effect10NEMA StandardHGS0.048” 0.005”No ABC def.Slight effect20 (max.)No effectSlight effectNo effectNo effectModerate effectNo effectSlight effectSlight effect51”129 seconds50” (1270mm)125 sec. (min.)0.23%0.6%0.5%0.9%800 cycles400 cycles (min.)Not applicable86 secondsNot applicableNot applicable5
Physical Properties of Vertical Surface Laminates – Arborite A3 gradeNEMA TestTypical Arborite Product type A3ThicknessNo ABC def.Slight effect10NEMA StandardVGP0.028” 0.004”(0.7mm 0.10mm)No ABC def.Slight effect20 (max.)No effectSlight effectNo effectSlight effect30”90 secondsNo effectModerate effectSlight effectSlight effect20” (508mm)80 sec. (min.)0.3%0.75%1.1% (max.)1.4% (max.)800 cycles400 cycles (min.)6/16” face3/16’’ back55 seconds1/2” radius (13mm)0.025” 0.002AppearanceLight ResistanceCleanability (cycles)Stain ResistanceReagents 1-10Reagents 11-15Boiling Water ResistanceHigh Temperature ResistanceImpact ResistanceRadiant Heat ResistanceDimensional StabilityMachine DirectionCross DirectionSurface Wear Resistance(cycles)FormabilityBlistering40 secondsPhysical Properties of Postforming Laminate - Arborite A4 gradeNEMA TestTypical Arborite Product type A4ThicknessAppearanceLight ResistanceCleanability (cycles)Stain ResistanceReagents 1-10Reagents 11-15Boiling Water ResistanceHigh TemperatureResistanceImpact ResistanceRadiant Heat ResistanceDimensional StabilityMachine DirectionCross DirectionSurface Wear Resistance(cycles)FormabilityBlisteringArborite Postforming & General Purpose LaminatesRevised: September 2015No ABC def.Slight effect10NEMA StandardHGP0.039” 0.005”(1mm 0.12mm)No ABC def.Slight effect20 (max.)No effectSlight effectNo effectNo effectModerate effectSlight effectSlight effectSlight effect40”110 seconds30” (762mm) (min.)100 sec. (min.)0.25%0.65%1.1% (max.)1.4% (max.)800400 (min.)*7/16” face*3/16” back70 seconds*5/8” face (16.00mm)0.034” 0.001”55 seconds6
Standards & ApprovalsArborite laminates meet or exceed standard tests set by: The National Electrical Manufacturers Association “ANSI/NEMA LD3-2005”, for high pressuredecorative laminates.The purpose of this Standards Publication is to provide standard test methods and performancevalues for high-pressure decorative laminates. NSF International (NSF) #35, “Laminated Plastic for Surfacing for Food Service Equipment.” AllArborite surface textures in grades A3, A4 and A5, comply. The GREENGUARD Environmental Institute has awarded its GREENGUARD Indoor Air QualityCertification to Arborite. All Arborite laminate product types were tested under the stringentGREENGUARD Standards for low-emitting products. All GREENGUARD Indoor Air QualityCertified products ensure minimal impact on the indoor environment. For a copy of the certificate,visit www.greenguard.org. Arborite is certified ISO 9001:2008 Quality Management System. Arborite is a member of the USGBC (US Green Building Council). Arborite is a member of the CaGBC (Canada Green Building Council).Building CodesArborite laminates meet the general requirements for the Canadian and US building codes.Antimicrobial Activity and EfficacyArborite decorative laminates have a non porous surface that does not promote bacterial growth.Tested under method JIS Z2801:2000 (E) for antimicrobial activity and efficacy, our laminate surfaceexhibited strong biocidal properties, with a reduction of 99.99% of the tested bacteria (S.aureus).FSC CertificationArborite products are available as FSC Mix Credit (please contact our customer service departmentfor availability).FSC trademark license code: FSC-C102327Arborite standard color collectionArborite offers a wide palette of colors ranging from pearlescent patterns to exotic woodgrains, to subtlyenhanced patterns and well blended solid colors. Please refer to our standard color collection for allcolors and patterns.Arborite features do not apply to pearlescent pattern (1403 White Pearl Wood) without a protectiveoverlay. This pattern is recommended for vertical application only.Arborite Postforming & General Purpose LaminatesRevised: September 20157
Product AvailabilityArborite high pressure laminates are manufactured in Canada and distributed throughout North Americathrough a network of distributors.As a result of our state-of-the-art manufacturing procedure, Arborite is able to offer quick deliveryservice to its distributors for all materials regardless of product grade, color, surface texture or size.Contact an Arborite distributor in your respective area.Care & MaintenanceTo clean Arborite laminate surfaces, simply wipe with a soft damp cloth and mild detergent; then rinsethoroughly with warm water and wipe dry. For stubborn stains, use an all-purpose cleaner, with a dampcloth; then rinse thoroughly with warm water and wipe dry.For really tough stains, create a paste composed of baking soda and water. Using a soft brush, scrubgently in a circular motion – 10 to 20 strokes should remove most stains; then rinse thoroughly withwarm water and wipe dry. Keep in mind that excessive scrubbing can dull or damage the finish. Foradditional care and maintenance tips, please visit our web site at n, HPL Care & Maintenance.WarrantyArborite, division of Wilsonart Canada ULC, warrants that, under normal use and service, the materialand workmanship of its products shall conform to the standards set forth on the applicable technicaldata sheets for a period of twelve (12) months from the date of sale to the first consumer purchaser.Dealers and distributors are provided with the technical data sheets which contain specific standards ofperformance for the products. In the event that an Arborite product does not perform as warranted, thefirst purchaser’s sole remedy shall be limited to repair or replacement of all or any part of the productwhich is defective, at the manufacturer’s sole discretion.This warranty applies only to product :1. In its original installation; and2. Purchased by the first consumer purchaser.This warranty is not transferable, and expires upon resale or transfer by the first consumer purchaser.This warranty shall not apply to defects or damage arising from any of the following :1. Accidents, abuse or misuse;2. Exposure to extreme temperature;3. Improper fabrication or installation; or4. Improper maintenance.NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE. UNDER NO CIRCUMSTANCESSHALL THE MANUFACTURER BE LIABLE FOR ANY LOSS OR DAMAGE ARISING FROM THEPURCHASE, USE OR INABILITY TO USE THIS PRODUCT, OR FOR ANY SPECIAL, INDIRECT,INCIDENTAL, OR CONSEQUENTIAL DAMAGES. NO FABRICATOR, INSTALLER, DEALER,AGENT OR EMPLOYEE OF ARBORITE, A DIVISION OF WILSONART CANADA ULC, HAS THEAUTHORITY TO MODIFY THE OBLIGATIONS OR LIMITATION OF THIS WARRANTY.This warranty gives you specific legal rights, and you may also have other rights which vary from stateto state; therefore, some of the limitations stated above may not apply to you. It is to your benefit tosave your documentation upon purchase of a product.Arborite Postforming & General Purpose LaminatesRevised: September 20158
Specification Form:Surface shall be Arborite Postforming & General Purpose LaminateProduced by ArboriteType: A3 (0.025”), A4 (0.034”), or A5 (0.045”)SurfaceColor Number:Color Name:Code:Name:FinishArborite Postforming & General Purpose LaminatesRevised: September 20159
Arborite Postforming & General Purpose Laminates 2 Revised: September 2015 Arborite – Features Postforming Feature – is the operation of forming decorative laminate into simple bends or shapes; Arborite decorative laminates provide flexibility as an attributed characteristic of our decorative high
Rustic Oak: 1860mm x 190mm x 15mm (3mm veneer) specs . 10 year Light Commercial Wear Guarantee*. LAMINATE Greystone LAMINATE Sierra Frost LAMINATE Windspray LAMINATE Burnt Husk LAMINATE Silver Mist LAMINATE Sunset Haze Manhattan Collection - Laminate Design Featured: Sunset Haze key features No pattern repitition Real timber feel .
**Premium 2 Laminate Finishes - WilsonArt:-12,-18, -35,-45.-55 &-78 ADD 140 **Premium 3 Laminate Finishes - WilsonArt: Hi Def Formica: Brushed ADD 230 *** Pionite /Nevamar / Arborite & Lamiart - Call for Quote Stain Options List Custom Stain Match (one time charge) 775 Non Standard Stain Color (Colors not shown on stain chart) - ADD 50
Laminex Laminate A hardwearing, stain and heat resistant product, Laminex laminate is available in a wide range of options, including solid colours, patterns and woodgrains. The durable nature of Laminex laminate ma
Armstrong Laminate Flooring can not be installed over carpet unless the carpet is a maximum 1/4″ (6.35 mm) thick, fully adhered over a suspended wood substrate. 327 INSTALLATION: Laminate Flooring, Residential Laminate Flooring, Light Commercial PRODUCTS: Armstrong 7mm: Arbor Real Bayberry Cumberland Woodland Park Armstrong 8mm:
Armstrong Laminate Flooring can be installed over any wood, cement, or gypsum-based underlayment boards that are installed according to the manufacturer's recommended guidelines. Use Two-in-One Underlayment for Laminate with no attached backing. No additional underlayment is needed for Laminate with attached backing.
BOPET ( Bi-axially oriented polyethylene terephthalate) based structure can replace the . would be cost effective and comparatively reduce laminate Cost per square meter of laminate by 31.83 percent over Aluminum based structure. This is a huge saving in all .
hospitality credenza with Harvest laminate front and Brilliant White laminate top. Purpose task chairs in Silvertex Sunkist with Platinum frame. Page 7 D: Motivate nesting tables in Brilliant White laminate and Platinum Metallic finish. Purpose task chair in Centurion Iron Ore and
Basic counselling skills for drug dependence treatment Drug dependence and basic counselling skills Module 1 Special considerations when involving families in drug dependence treatment. Basic counselling skills for drug dependence treatment Workshop 1. At the end of this workshop you will be able to: Training objectives Identify a minimum of 4 counselling strategies useful in drug abuse .
