Operating Instructions Blu-ray Disc Player Model No. DMP

7 ページ ２０１１年１月１１日火曜日 Discs that cannot be played by thisunit DVD-RAM Super Audio CD Photo CD DVD-Audio WMA discs DivX Plus HD discs HD DVD Region management informationBD-VideoThis unit plays BD-Video marked with labels containing theregion code “B”.Example:午後７時５２分 USB device This unit does not guarantee connection with all USBdevices. This unit does not support USB device charging. FAT12, FAT16 and FAT32 file systems are supported. This unit supports USB 2.0 High Speed. This unit can support an HDD formatted to FAT32.Some types of HDD may require the use of its externalpower supply unit.Getting startedDMP-BD75EG-VQT3A96.book BD-RE, BD-RDiscs recorded in DR mode using Panasonic Blu-ray Discrecorders may not playback the audio etc., correctly.DVD-VideoThis unit plays DVD-Video marked with labels containing theregion number “2” or “ALL”.Example:2ALL235 FinalizeDVD-R/RW/R DL, R/ RW/ R DL and CD-R/RW recordedby a recorder, etc. needs to be finalized by the recorder toplay on this unit. Please refer to the recorder’s instructions. BD-Video This unit supports high bit rate audio (Dolby Digital Plus,Dolby TrueHD, DTS-HD High Resolution Audio andDTS-HD Master Audio) adopted in BD-Video.– If “Dolby D/Dolby D /Dolby TrueHD” is set to “PCM”,the maximum possible number of Dolby sound is 2chPCM. ( 25) Music CDOperation and sound quality of CDs that do not conform toCD-DA specifications (copy control CDs, etc.) cannot beguaranteed. It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how thefiles were created. The producers of the disc can control how discs are played, so you may not always be able to control play as described in these operating instructions.Read the disc’s instructions carefully.VQT3A967

DMP-BD75EG-VQT3A96.book8 ページ �５２分STEP 1 : Connecting to a TVConnections and settings Do not place the unit on amplifiers/receivers or equipmentthat may become hot. The heat can damage the unit. Before making any connections we suggest youtemporarily disconnect all the units from AC power. Do not connect video signals through a video recorder.Due to copy guard protection the picture may not bedisplayed properly. Please use High Speed HDMI Cables that have the HDMIlogo (as shown on the cover). It is recommended that youuse Panasonic’s HDMI cable. When outputting 1080psignal, please use HDMI cables 5.0 meters or less.Recommended part number (High Speed HDMI Cable):RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),RP-CDHS50 (5.0 m), etc.Back of the unit Via an HDMI AV OUT terminal(High quality)HDMI INAUDIO INRL VIDEO INHDMI cable Set “HDMI Audio Output” to “On” ( 26). The HDMI connection supports VIERA Link “HDAVIControl” ( 21).8VQT3A96 Via a VIDEO OUT terminal(Standard quality)Audio/Video cable Connect terminals of the same colour.

DMP-BD75EG-VQT3A96.book9 ページ ２０１１年１月１１日火曜日STEP 2 : Connecting toan amplifier/receiver午後７時５２分STEP 3 : Connecting toa broadband networkThe following services can be used when this unit isconnected to broadband.– Firmware can be updated ( 12)– You can enjoy BD-Live ( 16)– You can access other devices ( 20)For details about connection method, refer to theinstructions supplied with the connected equipment.IN LAN cable connectionConnections and settingsHDMI INHDMI(ARC)HDMIcableMulti channelspeakersHDMI OUT(ARC)LAN CableAmplifier/receiverBroadband router, etc.HDMI INHDMIcableInternet Set “HDMI Audio Output” to “On” ( 26). Set “Digital Audio Output” depending on the connectedamplifier/receiver ( 25). The HDMI connection supports VIERA Link “HDAVIControl” ( 21). When using the TV or amplifier/receiver that does nothave the indication of “(ARC)” (non-ARC-compatible) onthe HDMI terminal, in order to enjoy TV’s sound byamplifier/receiver it is also required to connect theamplifier/receiver and TV using an optical digital cable. Use category 5 or above straight LAN cables (STP) whenconnecting to peripheral devices. Inserting any cable other than a LAN cable in the LANterminal can damage the unit.VQT3A969

DMP-BD75EG-VQT3A96.book10 ページ ２０１１年１月１１日火曜日STEP 4 : ConnectingAC mains lead午後７時５２分STEP 5 : SettingsEasy SettingAfter connecting your new player for the first time andpressing [Í], a screen for the basic settings will appear.PreparationTurn on the television and select the appropriate videoinput on the television.12AC mains lead(supplied)Press [Í].Setup screen appears.Follow the on-screen instructions andmake the settings with [3, 4] and press[OK].“On-Screen Language”, “TV Aspect” and “Quick Start”are set. ( 25 – 27)To a household mains socket(AC 220 to 240 V, 50 Hz) This unit consumes a small amount of AC power (“QuickStart”: “Off”, approx. 0.2 W) even when turned off. In theinterest of power conservation, if you will not be using thisunit for an extended period of time, it can be disconnected.10VQT3A96After completing “Easy Setting”, you can perform “NetworkEasy Setting”. You can perform this setup anytime by selecting “Easy Setting” in theSetup menu. ( 27) You can also change these settings individually. ( 25 – 27)

DMP-BD75EG-VQT3A96.book11 ページ �５２分Network Easy Setting(Internet Connection Test)Network Easy SettingAfter completing “Easy Setting”, you can continue with“Network Easy Setting”.Follow the on-screen instructions and makethe settings with [3, 4, 2, 1] and press[OK].Network Easy Setting (Internet Connection Test)Complete.- Connection to the InternetFail(B019)Failed the connection test.Cannot find the server.(B019)Please refer to the operating instructions for the causeof the error and the countermeasure for it.Press [OK].Network Easy SettingLAN setup and testing of home network and Internetconnections are required for Internet functions(BD-Live etc.).Broadband Internet connection is necessary for BD-Live.Is a LAN cable already connected ?Please refer to the operating instructions about networkconnection.DisplayPress [OK] to proceed.OKRETURNWhen you experienceproblems with settingsCheck the followingCannot find theserver.(B019) “Primary DNS” and “SecondaryDNS” settings of “IP Address /DNS Settings” ( 26)Failed to connect tothe server.(B020) The server may be busy or theservice may have beensuspended. Please wait a fewmoments, and then try again. Settings of “Proxy ServerSettings” ( 26) and the router Refer to the operating instructions of the hub or router. You can perform this setup anytime by selecting “Network Easy Setting”in the Setup menu. ( 26) You can redo these settings individually using “Network Settings”.( 26)Network Easy Setting(Home Network Connection Check)Network Easy Setting (Home Network Connection Check)Complete.1. LAN cable connection2. IP address setting3. Connection to gatewayFailFailFailLAN cable is not connected.Please check the connection.Select “Yes” and press [OK] to check networkconnection again.Select “No” and press [OK]to finish Network Easy Setting.YesNoOKCheck thefollowingDisplay1. LAN cable connectionFail2. IP address settingFail3. Connection to gatewayFail1. LAN cable connectionPass2. IP address settingFail3. Connection to gatewayFail1. LAN cable connectionPass2. IP address settingPass orHomenetworkavailable3. Connection to gatewayFail Connectionof the LANcables ( 9) Connectionand settingsof the huband router Settings of“IP Address /DNSSettings”( 26)VQT3A9611Connections and settingsOK

DMP-BD75EG-VQT3A96.book12 ページ ２０１１年１月１１日火曜日Firmware updatesOccasionally, Panasonic may release updated firmware forthis unit that may add or improve the way a featureoperates. These updates are available free of charge.This unit is capable of checking the firmware automaticallywhen connected to the Internet via a broadband connection.When a new firmware version is available, the followingmessage is displayed.New firmware is available.Please update firmware in Setup.To update the firmwarePress [HOME] select “Setup” select “PlayerSettings” select “Others” [OK] select “FirmwareUpdate” [OK] select “Update Now”DO NOT DISCONNECT the unit from the AC power orperform any operation while the update takes place.After the firmware is installed, “FInISH” will be displayed onthe unit’s display. Unit will restart and the following screenwill be displayed.午後７時５２分STEP 6 :Reprogramming theremote controlFor other Panasonic productsIf you have more than one Panasonic player/recorder andthe remote control operates both products at once, you willneed to change the remote control code on one product toprevent this occurrence. ( 27, “Remote Control”)For TVYou can operate the TV using the unit’s remote control.1Input the 2-digit code ( 32) with thenumber buttons while pressing [Í TV].e.g., 01: [0] B [1]2Test by turning on the television.The firmware has been updated.Current Version:x.xxOKRETURN If downloading on this unit fails or this unit is not connected to theInternet, then you can download the latest firmware from thefollowing website and burn it to a CD-R to update the is site is in English only.)To show the firmware version on this unit. ( 27, “SystemInformation”) Downloading will require several minutes. It may take longer ormay not work properly depending on the connection environment. If you do not want to check for the latest firmware version, set“Automatic Update Check” to “Off”. ( 27)12VQT3A96 If your television brand has more than one code listed, select the onethat allows correct operation.

DMP-BD75EG-VQT3A96.book13 ページ ２０１１年１月１１日火曜日Inserting or removingmediaPlayback午後７時５２分HOME menuMajor functions of this unit can be operated from the HOMEmenu.PreparationTurn on the television and select the appropriate video inputon the television.1Press [Í] to turn on the unit.The Home menu will be displayed.2Press [OK] or [3, 4, 2, 1] to select theitem.HOMEMEDIASERVERBlu-ray Disc PlayerPhotosSetupMusicVideos When a media is inserted, contents selection screenfor that media is displayed. If there are any other items, repeat this step. To return to HOME menu, select “HOME” or press[RETURN] several ay back the contents.( 14, 18, 19) When multiple contents arerecorded, select the typesof contents or the title.( 20)PlayerSettings( 24)USBManagement( 16)To show the HOME menuPress [HOME]. Items to be displayed may vary with the media. Where necessary, set “Mixed Data Disc Option” when using a disc withboth data files (MP3, JPEG, DivX, MKV) and Video. ( 24)VQT3A9613Playback When inserting a media item, ensure that it is facing theright way up. If you connect a Panasonic product with a USBconnection cable, the setup screen may be displayed onthe connected equipment. For details, refer to theinstructions for the connected equipment.Connections and settings1

DMP-BD75EG-VQT3A96.book14 ページ ２０１１年１月１１日火曜日Playing video contentsInsert the media.StopWhen the contents menu is displayed, press[3, 4, 2, 1] to select the item. ( 13)2Press [ STOP].Press [3, 4] to select the title and press[OK]. To show menusYou can display Top Menu, DIRECT NAVIGATOR or Pop-upMenu.Press [TOP MENU] or [POP-UP MENU]. Press [3, 4, 2, 1] to select the item and press [OK].e.g.BD-VideoT: Title, C: Chapter, PL: PlaylistPauseSearch/Slow-motionSearchWhile playing, press [SEARCH6] or[SEARCH5]. Music and MP3: The speed is fixed to a single step.Slow-motionElapsed time in the titleBD (Video)0:05.140:20.52Current positionResume play functionPress [1PLAY] to restart from this position. The position is cleared if the tray is opened or you press[ STOP] several times to display “StOP” on the unit’sdisplay. On BD-Video discs including BD-J, the resume playfunction does not work. Press [;PAUSE] again or [1PLAY] to restart play.While playing, press [STATUS].The status messages give you information about what iscurrently being played. Each time you press [STATUS], thedisplay information may change or will disappear from thescreen.C1The stopped position is memorized.Press [;PAUSE]. To show the status messages T1Other operations during playThese functions may not work depending on the media andcontents.BD DVD CD USB1午後７時５２分PlayTotal time Signal from PAL discs is output as PAL. Signal from NTSC discs isoutput as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in“NTSC Contents Output” for NTSC discs. ( 25) DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.Press [ STOP] when you have finished playback to protect the unit’smotor, your television screen and so on. Depending on media and contents, the display may change or may notappear. DivX and MKV: Successive play is not possible. It is not possible to playback AVCHD and MPEG2 video which havebeen dragged and dropped, copied and pasted to the media. To save on electricity, the unit is turned off automatically if there is nobutton operation for about 30 minutes when not playing back (such aswhen paused, displaying the menu, displaying still pictures, etc.).While paused, press [SEARCH5].The speed increases up to 5 steps. Press [1PLAY] to revert to normal playback speed.SkipWhile playing or paused, press [:] or[9].Skip to the title, chapter or track you want to play. Each press increases the number of skips.Frame-by-frameWhile paused, press [1] (;1). Press and hold to change in succession forward. Press [1PLAY] to revert to normal playback speed.Changing audioPress [AUDIO].You can change the audio channel number or soundtracklanguage, etc.14VQT3A96

DMP-BD75EG-VQT3A96.book15 ページ �５２分Useful functions12Press [OPTION].Select an item, then press [OK].While DIRECT NAVIGATOR screen is displayedViewPlaylistsTo play playlists.View TitlesTo select the title.FolderTo switch to another folder.While playingTop MenuTo display Top Menu.Pop-upMenuTo display Pop-up Menu.MenuTo display Menu. Depending on the media and contents, displayed items are different. Displaying subtitle textPlaybackYou can display subtitle text on the DivX and MKV video discwith this unit.The operation might be different or it may not operateproperly depending on the way the file was made or thestate of this unit (playing, stopped, etc.).Set “Subtitle” in “Disc” ( 22) DivX and MKV video files that do not display “Text” do not containsubtitle text. If the subtitle text is not displayed correctly, try changing the languagesettings. ( 24) This function has no relation to the subtitles specified in DivX standardspecifications and has no clear standard.VQT3A9615

DMP-BD75EG-VQT3A96.book16 ページ ２０１１年１月１１日火曜日Enjoying BD-Live orpicture-in-picture in BD-VideoEnjoying BD-Live discs withInternet午後７時５２分Playing picture-in-pictureTo turn on/off secondary videoPress [PIP].Secondary videoBD-Live allows you to enjoy more functions such assubtitles, exclusive images and online games by connectingthis unit to the Internet. Since most of the BD-Livecompatible discs are played back using the BD-Livefunction, additional contents are required to be downloadedinto the external memory (local storage). This unit uses a USB device as a local storage device.BD-Live function cannot be used when there is no USBdevice inserted.1Perform network connection andsettings. ( 9, 11)2Insert a USB memory with 1 GB or morefree space.3To turn on/off secondary audio[DISPLAY] select “Disc” [1] select“Signal Type” [OK] set “Soundtrack”Insert the disc.“Secondary Video” to “On” or “Off” Deleting data on the USB deviceIf you no longer need data recorded on the USB device, youcan delete data with the following operation.12345Insert a USB device.Press [HOME].Press [OK] to select “Setup”.Press [1] to select “USB Management”.Press [OK].USB ManagementUSB deviceNo. of Files 1Free space 1844 MBBD-Video Data EraseOKRETURN6 Press [2, 1] to select “Yes” and press [OK].7 Press [2, 1] to select “Start” and press [OK].16VQT3A96Primary videoin The usable functions and the operating method may vary with eachdisc, please refer to the instructions on the disc and/or visit theirwebsite. Some BD-Live content available on the Blu-ray discs may require anInternet account to be created in order to access the BD-Live content.Follow the screen display or instruction manual of the disc forinformation on acquiring an account. “BD-Live Internet Access” may need to be changed for certain discs( 24). When discs supporting BD-Live are played back, the player or disc IDsmay be sent to the content provider via the Internet. During search/slow-motion or frame-by-frame, only the primary video isdisplayed. When “BD-Video Secondary Audio” in “Digital Audio Output” is set to“Off”, secondary audio will not be played ( 25).

DMP-BD75EG-VQT3A96.book17 ページ �５２分Regarding DivXABOUT DIVX VIDEO:DivX is a digital video format created by DivX, Inc. This isan official DivX Certified device that plays DivX video. Visitdivx.com for more information and software tools to convertyour files into DivX video.ABOUT DIVX VIDEO-ON-DEMAND:This DivX Certified device must be registered in order toplay purchased DivX Video-on-Demand (VOD) movies.To obtain your registration code, locate the DivX VODsection in your device setup menu.Go to vod.divx.com for more information on how to completeyour registration. Video images of the copyright-protected DivX contentsstored on USB device can be output only through theHDMI output terminal.Display the unit’s registration code.( 27, “DivX Registration” in “Others”)DivX RegistrationYou must register this unit to playprotected DivX videos.The registration code is necessary toregister this unit.Please register at www.divx.com/vod/10 alphanumericcharactersPlaybackRegistration Code: XXXXXXXXXX After playing DivX VOD content for the first time, theregistration code is not displayed. If you purchase DivX VOD content using a registrationcode different from this unit’s code, you will not be able toplay this content.Cancel the unit’s registration.( 27, “DivX Registration” in “Others”)Press [2, 1] to select “Yes” in “DivX Registration”.Use the deregistration code to cancel the registration inwww.divx.com.Regarding DivX VOD content that can onlybe played a set number of timesSome DivX VOD contents can only be played a set numberof times. When you play this content, the number of timesalready played and initially playable number of times isdisplayed. The remaining number of plays decreases each time aprogramme is played. However, when playing from thepoint where play was previously stopped, the remainingnumber of plays does not decrease due to the resumeplay function.VQT3A9617

DMP-BD75EG-VQT3A96.book18 ページ �５２分Playing still picturesBD DVD CD USB(BD-RE, DVD-R/-R DL, CD-R/RW, USB device)112Press [OPTION].Select an item, then press [OK].While Photo View screen is displayedInsert the media.When the contents menu is displayed, press[3, 4, 2, 1] to select the item. ( 13)2Useful functionsFolderTo select the still pictures in another folder.StartSlideshowYou can display still pictures one by one ata constant interval.Press [3, 4, 2, 1] to select the stillpicture and press [OK].Photo ViewDIRECT NAVIGATORUSB ( JPEG isplay IntervalChange the display interval.Transition EffectSet display method.Repeat PlayRepeat slideshow.Press [3, 4, 2, 1] to select “Set” andpress [OK].0009While playingPage 001/001OPTIONPlayRETURNPress [2, 1] to display the previous or next still picture.To exit the screenPress [TOP MENU]. To show the still picture p

Model No. DMP-BD75 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. EG until 2011/2/8