MPLAB IDE PROJECT TUTORIALS FOR THIRD PARTY TOOLS
MPLAB IDEPROJECT TUTORIALSFOR THIRD PARTY TOOLSInformation contained in this publication regarding device applications and the like is intended by way of suggestiononly. No representation or warranty is given and no liability is assumed by Microchip Technology Incorporated withrespect to the accuracy or use of such information. Use of Microchip’s products as critical components in life supportsystems is not authorized except with express written approval by Microchip. 2000 Microchip Technology Incorporated. All rights reserved.The Microchip logo and name, PIC, PICmicro, PICSTART, PRO MATE, KEELOQ, and MPLAB are registered trademarksof Microchip Technology Incorporated in the U.S.A. and other countries. PICC, PICC Lite, PICBASIC, PICBASIC PRO,In-Circuit Serial Programming and ICSP are trademarks of Microchip Technology in the U.S.A. and other countries.Intel and Pentium are registered trademarks of Intel Corporation.Microsoft, Internet Explorer, Windows, Windows NT, Windows 2000, and IntelliMouse are registered trademarks ofMicrosoft Corporation in the United States and/or other countries.Netscape is a registered trademark of Netscape Communications Corporation in the United States and/or othercountries.All product/company trademarks mentioned herein are the property of their respective companies. 2000 Microchip Technology Inc.DS51234A
MPLAB IDE Project TutorialsDS51234A 2000 Microchip Technology Inc.
MPLAB IDE PROJECT TUTORIALSTable of ContentsPrefaceIntroduction . viiHighlights . viiAbout This Guide . viiWarranty Registration .ixRecommended Reading . xTroubleshooting . xThe Microchip Internet Web Site .xiDevelopment Systems Customer Notification Service .xiiCustomer Support . xivChapter 1. Project Overview - Third Party Language Tools1.1Introduction . 11.2Highlights . 11.3Overview of Projects . 11.4Preliminary Setup of MPLAB IDE . 31.5Integrating Other Tools into MPLAB IDE . 4Chapter 2. Project Overview - HI-TECH PICC Tools2.1Introduction . 72.2Highlights . 72.3Overview of Projects with HI-TECH PICC Tools . 72.4Preliminary Setup of MPLAB IDE with PICC Tools . 9Chapter 3. Single Source File Project using PICC Tools3.1Introduction . 153.2Highlights . 153.3Overview of One Source File Project . 153.4Create Source File . 16 2000 Microchip Technology Inc.DS51234A-page iii
MPLAB IDE Project Tutorials3.5Set Development Mode .173.6Create New Project .173.7Edit Project .183.8Set Node Properties for Target Node .193.9Add Source File .203.10 Finish Editing Project .213.11 Debug and Build Project .223.12 More Project Information .243.13 Optimization and Other Node Properties .27Chapter 4. Multiple Source File Project using PICC Tools4.1Introduction .294.2Highlights .294.3Overview of Multiple Source File Project .294.4Create Source Files .304.5Set Development Mode .314.6Create New Project .314.7Edit Project .324.8Set Node Properties for Target Node .334.9Add First Source File .344.10 Set Node Properties for First Source Node .354.11 Add Second Source File .374.12 Finish Editing Project .394.13 Debug and Build Project .404.14 More Project Information .424.15 Optimization and Other Node Properties .46Chapter 5. Project Overview - IAR ToolsDS51234A-page iv5.1Introduction .475.2Highlights .475.3Overview of Projects with IAR Tools .475.4Preliminary Setup of MPLAB IDE with IAR Tools .49 2000 Microchip Technology Inc.
Table of ContentsChapter 6. MPLAB IDE Project using IAR Tools6.1Introduction . 536.2Highlights . 536.3Overview of MPLAB IDE Project . 546.4Create Source Files . 546.5Set Development Mode . 556.6Create New Project . 566.7Edit Project . 576.8Set Node Properties for Target Node . 586.9Add First Source File . 596.10 Set Node Properties for First Source Node . 606.11 Add Second Source File . 626.12 Finish Editing Project . 636.13 Debug and Build Project . 646.14 More Project Information . 666.15 Optimization and Other Node Properties . 67Glossary .69Introduction . 69Highlights . 69Terms . 69Index .87Worldwide Sales and Service .90 2000 Microchip Technology Inc.DS51234A-page v
MPLAB IDE Project TutorialsDS51234A-page vi 2000 Microchip Technology Inc.
MPLAB IDE PROJECT TUTORIALSPrefaceIntroductionThis first chapter contains general information that will be useful to knowbefore using the tutorials.HighlightsThe information you will garner from this chapter: About this Guide Warranty Registration Recommended Reading Troubleshooting The Microchip Technology Internet Web Site Development Systems Customer Notification Service Customer SupportAbout This GuideDocument LayoutThis document describes how to use third party development tools withMPLAB IDE. The manual layout is as follows: Preface – This section. Chapter 1: Project Overview - Third Party Tools – Describes in general how to use MPLAB IDE with third party tools. Chapter 2: Project Overview - HI-TECH PICC Tools – Describesspecifically how to use MPLAB IDE with HI-TECH PICC tools. Includessetup information. Chapter 3: Single Source File Project using PICC Tools– Walks youthrough making an MPLAB IDE project with PICC tools using onesource file. Chapter 4: Multiple Source File Project using PICC Tools – Walksyou through making an MPLAB IDE project with PICC tools using several source files. Chapter 5: Project Overview - IAR Tools – Describes specifically howto use MPLAB IDE with IAR tools. Includes setup information. 2000 Microchip Technology Inc.DS51234A-page vii
MPLAB IDE Project Tutorials Chapter 4: MPLAB IDE Project using IAR Tools – Walks you throughmaking an MPLAB IDE project with IAR tools using either one or several source files. Glossary – A glossary of Microchip terms. Index – Cross-reference listing of terms, features, and sections of thisdocument. Worldwide Sales and Service – A listing of Microchip sales andservice locations and telephone numbers worldwide.Conventions Used in this GuideThis manual uses the following documentation conventions:Table: Documentation ConventionsDescriptionRepresentsExamplesCode (Courier font):Plain charactersSample codeFilenames and paths#define STARTc:\autoexec.batAngle brackets: Variables label , exp Square brackets [ ]MPASMWIN[main.asm]Optional argumentsCurly brackets and Choice of mutually exclupipe character: { } sive argumentsAn OR selectionerrorlevel {0 1}Lower casecharacters inquotesType of dataEllipses.Used to imply (but notlistshow) additional text that is [“list option.,not relevant to the example “list option”]0xnnnA hexadecimal numberwhere n is a hexadecimaldigitItalic charactersA variable argument; it can char isascii (char,be either a type of data (in ch);lower case characters) or aspecific example (in uppercase characters).“filename”0xFFFF, 0x007AInterface (Helvetica font):Underlined, italicA menu selection from thetext with right arrow menu barFile SaveBold charactersOK, CancelA window or dialog buttonto clickCharacters in angle A key on the keyboardbrackets DS51234A-page viii Tab , Ctrl-C 2000 Microchip Technology Inc.
PrefaceTable: Documentation Conventions (Continued)DescriptionRepresentsExamplesDocuments (Helvetica font):Italic charactersReferenced booksMPLAB IDE, Simulator,Editor User’s GuideDocumentation UpdatesAll documentation becomes dated, and this tutorial is no exception. SinceMPLAB IDE and other Microchip tools are constantly evolving to meetcustomer needs, some MPLAB IDE dialogs and/or tool descriptions may differfrom those in this document. Please refer to our Web site athttp://www.microchip.com to obtain the latest documentation available.Documentation Numbering ConventionsDocuments are numbered with a “DS” number. The number is located on thebottom of each page, in front of the page number. The numbering conventionfor the DS Number is: DSXXXXXA,where:XXXXX The document number.A The revision level of the document.Warranty RegistrationPlease complete any Warranty Registration Cards and mail them promptly toMicrochip Technology or Third Party vendors. Sending in your MicrochipWarranty Registration Card entitles you to receive new product updates.Interim software releases are available at the Microchip Web site. 2000 Microchip Technology Inc.DS51234A-page ix
MPLAB IDE Project TutorialsRecommended ReadingThis tutorial describes how to use MPLAB IDE with third party tools. For moreinformation on MPLAB IDE or third party tools, the following is recommendedreading.README FilesFor the latest information on Microchip tools (MPLAB IDE, MPASM assembler, etc.), read the associated README files (ASCII text files) includedwith the MPLAB IDE software. Third party tools generally have readme filesalso, with the most up-to-date information available on the tools.Help FilesFor the the most up-to-date information on using Microchip tools, consult theassociated on-line help files (mplab.hlp, mpasm.hlp, etc.) availablethrough the Help menu of MPLAB IDE software. The help files containupdated information that may not be included in documentation.MPLAB IDE, Simulator, Editor User’s Guide (DS51025)Comprehensive guide that describes installation and features of Microchip’sMPLAB Integrated Development Environment, including the editor andsimulator functions in the MPLAB IDE environment.Microchip Technology Library CD-ROM (DS00161)This CD-ROM contains comprehensive application notes, data sheets, andtechnical briefs for all of Microchip products. To obtain this CD-ROM, contactthe nearest Microchip Sales and Service location (see back page).Third Party DocumentationThird Party tool vendors may have manuals and help files, as well aselectronic manuals, available for more information on the use of their tools.Microsoft Windows ManualsThis manual assumes that users are familiar with Microsoft Windowsoperating system. Many excellent references exist for this software program,and should be consulted for general operation of Windows.TroubleshootingIf you have difficulty with any of the tutorials, consult MPLAB IDEdocumentation (MPLAB IDE, Simulator, Editor User’s Guide (DS51025) orMPLAB Help) and/or Third Party documentation for help.DS51234A-page x 2000 Microchip Technology Inc.
PrefaceThe Microchip Internet Web SiteMicrochip provides on-line support on the Microchip World Wide Web (WWW)site.The Web site is used by Microchip as a means to make files and informationeasily available to customers. To view the site, the user must have access tothe Internet and a Web browser, such as Netscape Communicator orMicrosoft Internet Explorer . Files are also available for FTP download fromour FTP site.Connecting to the Microchip Internet Web SiteThe Microchip Web site is available by using your favorite Internet browserto attach to:http://www.microchip.comThe file transfer site is available by using an FTP service to connect to:ftp://ftp.microchip.comThe Web site and file transfer site provide a variety of services. Users maydownload files for the latest Development Tools, Data Sheets, ApplicationNotes, User’s Guides, Articles, and Sample Programs. A variety of Microchipspecific business information is also available, including listings of Microchipsales offices, distributors and factory representatives. Other data available forconsideration is: Latest Microchip Press Releases Technical Support Section with Frequently Asked Questions Design Tips Device Errata Job Postings Microchip Consultant Program Member Listing Links to other useful Web sites related to Microchip Products Conferences for products, Development Systems, technical information Listing of seminars and events 2000 Microchip Technology Inc.DS51234A-page xi
MPLAB IDE Project TutorialsDevelopment Systems Customer Notification ServiceMicrochip provides a customer notification service to help our customers keepcurrent on Microchip products with the least amount of effort. Once yousubscribe to one of our list servers, you will receive e-mail notificationwhenever we change, update, revise or have errata related to that productfamily or development tool. See the Microchip Web site atwww.microchip.com.The Development Systems list names are: Compilers Emulators Programmers MPLAB Otools (Other Tools)Once you have determined the names of the lists that you are interested in,you can subscribe by sending a message to:listserv@mail.microchip.comwith the following as the body:subscribe listname yournameHere is an example:subscribe mplab John DoeTo UNSUBSCRIBE from these lists, send a message to:listserv@mail.microchip.comwith the following as the body:unsubscribe listname yournameHere is an example:unsubscribe mplab John DoeThe following sections provide descriptions of the available DevelopmentSystems lists.CompilersThe latest information on Microchip C compilers, assemblers and linkers.These include MPLAB C17, MPLAB C18, MPASM assembler, MPLINK linker, and MPLIB librarian.To SUBSCRIBE to this list, send a message to:listserv@mail.microchip.comwith the following as the body:subscribe compilers yournameDS51234A-page xii 2000 Microchip Technology Inc.
PrefaceEmulatorsThe latest information on Microchip In-Circuit Emulators. These includeMPLAB ICE emulators.To SUBSCRIBE to this list, send a message to:listserv@mail.microchip.comwith the following as the body:subscribe emulators yournameProgrammersThe latest information on Microchip PICmicro microcontroller (MCU) deviceprogrammers. These include PRO MATE II and PICSTART Plus.To SUBSCRIBE to this list, send a message to:listserv@mail.microchip.comwith the following as the body:subscribe programmers yournameMPLABThe latest information on Microchip MPLAB IDE, the Windows IntegratedDevelopment Environment for development systems tools. This list is focusedon MPLAB IDE, MPLAB SIM, MPLAB IDE Project Manager and generalediting and debugging features. For specific information on MPLAB IDEcompilers, linkers and assemblers, subscribe to the COMPILERS list. Forspecific information on MPLAB IDE emulators, subscribe to the EMULATORSlist. For specific information on MPLAB IDE device programmers, pleasesubscribe to the PROGRAMMERS list.To SUBSCRIBE to this list, send a message to:listserv@mail.microchip.comwith the following as the body:subscribe mplab yournameOtools (Other Tools)The latest information on other development system tools provided byMicrochip. For specific information on MPLAB IDE and its integrated toolsrefer to the other mail lists.To SUBSCRIBE to this list, send a message to:listserv@mail.microchip.comwith the following as the body:subscribe otools yourname 2000 Microchip Technology Inc.DS51234A-page xiii
MPLAB IDE Project TutorialsCustomer SupportUsers of Microchip products can receive assistance through severalchannels: Distributor or Representative Local Sales Office Field Application Engineer (FAE) Corporate Applications Engineer (CAE) HotlineCustomers should call their distributor, representative or field applicationengineer (FAE) for support. Local sales offices are also available to helpcustomers. See the back cover for a listing of sales offices and locations.Corporate applications engineers (CAEs) may be contacted at(480) 792-7627.In addition, there is a Systems Information and Upgrade Line. This lineprovides system users a listing of the latest versions of all of Microchip’sdevelopment systems software products. Plus, this line provides informationon how customers can receive any currently available upgrade kits.The Hotline Numbers are:1-800-755-2345 for U.S. and most of Canada.1-480-792-7302 for the rest of the world.DS51234A-page xiv 2000 Microchip Technology Inc.
MPLAB IDE PROJECT TUTORIALSChapter 1. Project Overview - Third Party Language Tools1.1IntroductionThis chapter gives an overview of using projects in MPLAB IDE with thirdparty language tools.1.2HighlightsThis chapter discusses: Overview of Projects Preliminary Setup of MPLAB IDE Integrating Other Tools into MPLAB IDE1.3Overview of ProjectsSeveral third party language tools work with MPLAB IDE. These tools may beused as part of an MPLAB IDE Project. A project in MPLAB IDE is a group offiles needed to build an application, along with their associations to variousbuild tools. See the MPLAB IDE, Simulator, Editor User’s Guide (DS51025)for more information on MPLAB IDE and MPLAB IDE Projects.Figure 1.1 shows a generic MPLAB IDE Project. 2000 Microchip Technology Inc.DS51234A-page 1
MPLAB IDE Project TutorialsMPLAB IDE ath.libdevice.lkrLINKERLinkerprog.outprog.codMPLAB SIMprog.hexMPLAB ICElibrary &linker scriptfilesprog.lstprog.mapPRO MATE IIPICSTART re 1.1: Project RelationshipsDS51234A-page 2 2000 Microchip Technology Inc.
Project Overview - Third Party Language ToolsIn this MPLAB IDE Project, the C source file main.c is associated with acompiler. MPLAB IDE will use this information to generate an object file(main.o) for input into a linker.An assembly source file (prog.asm) is shown also with its associatedassembler. MPLAB IDE will use this information to generate the object fileprog.o for input into a linker.In addition, precompiled object files (precomp.o) may be included in aproject, with no associated tool required. Types of precompiled object filesthat are generally required in a project are: Start up code Initialization code Interrupt service routines Register definitionsPrecompiled object files are often device and/or memory model dependent.Some library files (math.lib) may be available with the tools. Others may bebuilt outside the project using a librarian tool.The object files, along with library files and a linker script file (device.lkr)are used to generate the project output files via a linker.The main output file generated from a linker is the HEX file (prog.hex), usedby simulators (MPLAB SIM), emulators (MPLAB ICE) and programmers (PROMATE II and PICSTART Plus). The other possible output files are: COFF file (.out). Intermediate file used to generate Code file, HEX file,and Listing file. Code file (.cod). Debug file used by MPLAB IDE. Listing file (.lst). Original source code, side-by-side with final binarycode. Map file (.map). Shows the memory layout after linking. Indicates usedand unused memory regions.For information on available third party tools, please refer to the Third PartyGuide (DS00104) for more information.1.4Preliminary Setup of MPLAB IDEIn order to use third party language tools with MPLAB IDE you must: Install MPLAB IDE. The latest version of this free software is availableat our Web site (http://www.microchip.com) or from any sales office(back cover). Install the Third Party Tool. Consult the tool documentation for how toinstall. 2000 Microchip Technology Inc.DS51234A-page 3
MPLAB IDE Project TutorialsIn general, you will need to set up MPLAB IDE first as follows: Specific Third Party Setup - You may need to set up environmental variables for the third party tool to operate correctly. Install Language Tools - You will need to install the third party toolsusing the Install Language Tool dialog (Project Install Language Tool)so that MPLAB IDE can use them.1.5Integrating Other Tools into MPLAB IDEIn order to integrate with MPLAB IDE, third party tool executables shouldhave these properties: All input must be received from the command line. Do NOT wait on user input. Do NOT emit messages to the error stream (stderr, cerr). MPLABIDE can find error messages in an error file (sourcename.err) or onthe standard output stream (stdout, cout). Make all output go to theDOS window or an error file (not in a special error window or screen).Look at the files with extension.mtc in the MPLAB IDE installation directory.These set up the command line switches for the Node Properties dialogs.Then look at the tlxxxx.ini. This has the name of the tool group whichMPLAB IDE will show in its Project dialog. The last line points to the name ofthe associated *.mtc file(s). Support files for HI-TECH's PICC products are:- tlhitech.ini- picc cmp.mtc- picc asm.mtc- picc lkr.mtc Support files for HI-TECH's PICC Lite products are:- tlpicl.ini- picl cmp.mtc- picl asm.mtc- picl lkr.mtc Support for IAR's products are:- tliar.ini- iara.mtc- iarc.mtc- iarl.mtcDS51234A-page 4 2000 Microchip Technology Inc.
Project Overview - Third Party Language Tools Support files for microEngineering Labs PICBASIC products, including PICBASIC and PICBASIC PRO compilers are:- tlmelabs.ini- pbp.mtc- pbc.mtc Support files for CCS (Custom Computer Services) C-language compilers, including PCB, PCH, and PCM are:- tlcss.ini- ccsc.mtc Support files for Byte Craft's products are- tlbcraft.ini- mpc.mtc 2000 Microchip Technology Inc.DS51234A-page 5
MPLAB IDE Project TutorialsNOTES:DS51234A-page 6 2000 Microchip Technology Inc.
MPLAB IDE PROJECT TUTORIALSChapter 2. Project Overview - HI-TECH PICC Tools2.1IntroductionThis chapter gives an overview of using projects in MPLAB IDE with the HITECH PICC tool. Chapter 3 and Chapter 4 discuss in detail how to makesingle source file and multiple source file MPLAB IDE projects with PICCtools, respectively.2.2HighlightsThis chapter discusses: Overview of Projects with HI-TECH PICC Tools Preliminary Setup of MPLAB IDE with PICC ToolsThe next two chapters discuss: Single Source File Project using PICC Tools Multiple Source File Project using PICC Tools2.3Overview of Projects with HI-TECH PICC ToolsThere are several versions of HI-TECH PICC tools: PICC tools (picc.exe) - Compiler, assembler and linker for PICmicro MCU code development. PICC Lite tools (picl.exe) - Free demo version of the PICC toolsthat only support PIC16X8X devices. PICC tools demo - Free demo version of the PICC tools that only workwith the HI-TECH development environment, NOT MPLAB IDE.PICC tools may be used with MPLAB IDE running under Windows 3.1x,Windows 95/98 or Windows NT /2000.PICC tools are one group of several third party language tools that work withMPLAB IDE. These tools may be used as part of an MPLAB IDE Project. Aproject in MPLAB IDE is a group of files needed to build an application, alongwith their associations to various build tools. See the MPLAB IDE, Simulator,Editor User’s Guide (DS51025) for more information on MPLAB IDE andMPLAB IDE Projects.Figure 2.1 shows a generic MPLAB IDE Project using PICC tools. 2000 Microchip Technology Inc.DS51234A-page 7
MPLAB IDE Project TutorialsMPLAB IDE PICC Compiler PICC h.objLINKERPICC Linkerprog.codMPLAB SIMprog.hexMPLAB ICElibraryfilesprog.lstprog.mapPRO MATE IIPICSTART re 2.1: Project RelationshipsDS51234A-page 8 2000 Microchip Technology Inc.
Project Overview - HI-TECH PICC ToolsIn this MPLAB IDE Project, the C source file main.c is associated with thePICC Compiler. MPLAB IDE will use this information to generate an object file(main.obj) for input into the linker (PICC Linker).An assembly source file (prog.asm) is shown also with its associatedassembler (PICC Assembler). MPLAB IDE will use this information togenerate the object file prog.obj for input into the linker.In addition, precompiled object files (precomp.obj) may be included in aproject, with no associated tool required.Standard library files are available with the compiler. Others (math.obj) maybe built outside the project using the librarian tool, LIBR (libr.exe). See HITECH documentation for more information on using the librarian.The object files, along with library files, are used to generate the projectoutput files via the linker.The main output file generated by the linker is the HEX file (prog.hex), usedby simulators (MPLAB SIM), emulators (MPLAB ICE) and programmers (PROMATE II and PICSTART Plus). The other output files are: Code file (.cod). Debug file used by MPLAB IDE. Listing file (.lst). Original source code, side-by-side with final binarycode. Map file (.map). Shows the memory layout after linking. Indicates usedand unused memory regions.For more information on using HI-TECH PICC tools, please see thedocumentation you received with your PICC tools or visit HI-TECH’s Web site(http://www.htsoft.com).2.4Preliminary Setup of MPLAB IDE with PICC ToolsIn order to use PICC tools with MPLAB IDE you must: Install MPLAB IDE. The latest version of this free software is availableat our Web site (http://www.microchip.com) or from any sales office(back cover). Install PICC tools. Consult the HI-TECH documentation on how to dothis.No matter what type of project you choose to use (single file or multiple file),you will need to set up MPLAB IDE first as follows: Error/Warning Formatting - Set up error/warning output formatting forWindows 3.1x/95/98, Windows NT 4.0 or Windows 2000. Install PICC or PICC Lite Language Tools - Install the HI-TECH tools sothat MPLAB IDE can use them. Select either picc.exe (all PICmicro devices) or picl.exe (only PIC16X8X devices). 2000 Microchip Technology Inc.DS51234A-page 9
MPLAB IDE Project Tutorials2.4.1Error/Warning Formatting - Windows 3.1x/95/98Place t
This tutorial describes how to use MPLAB IDE with third party tools. For more information on MPLAB IDE or third party tools, the following is recommended reading. README Files For the latest information on Microchip tools (MPLAB IDE, MPASM assembler, etc.), read the associated README files (ASCII text file
Chapter 1: MPLAB IDE Preview – An overview of what MPLAB IDE is and how it works. Chapter 2: MPLAB IDE Installation – How to install MPLAB IDE on your computer. Chapter 3: Getting Started with MPLAB IDE – A Tutorial – How to begin using MPLAB IDE. Chapter 4: MPLAB IDE Projects Tuto
MPLAB C18 C Compiler The layout of this document: –Installing MPLAB C18: A step-by-step guide through the installation process of MPLAB C18 Compiler. –Configuring MPLAB IDE: MPLAB IDE setup for use with MPLAB C18. Basics of MPLAB IDE configuration to run your Program
MPLAB X IDE The latest information on Microchip MPLAB X IDE, the Windows Integrated Development Environment for dev elopment systems tools. This list is focused on the MPLAB IDE, MPLAB ID E Project Manager, MPLAB Editor and MPLAB SIM simu
MPLAB SIM MPLAB ICE 2000 MPLAB ICD 2 MPLAB ICE 4000 MPLAB IDE Debugger The other debug engines are hardware devices, while MPLAB SIM is a software program, running on your PC. MPLAB SIM provides many of the same features as in-circuit emulators and in-circuit debuggers.
MPLAB Harmony provides a MPLAB Harmony Configurator (MHC) MPLAB X IDE plug-in that can be installed in MPLAB X IDE to help you create your own MPLAB Harmony applications. To create a new MPLAB
MPLAB X CCS C Compiler Tutorial How to install the CCS C Compiler inside MPLAB X Before the CCS C Compiler can be used inside MPLAB X, the CCS C MPLAB X Plug-in must be installed. This process can be done inside MPLAB X. 1. Launch MPLAB X. 2. From the MPLAB X menu, select Tools - Plugins 3.
MPLAB Harmony provides a convenient MPLAB X IDE plug-in configuration utility, the MPLAB Harmony Configurator (MHC), which you can use to easily create MPLAB Harmony-based projects. This tutorial will show you how to use the MHC to quickly create your first MPLAB Harmony application using the following steps: Step 1: Create a New Project
Starting MPLAB SIM MPLAB Desktop You should already be familiar with MPLAB IDE before going through this seminar. You might want to watch the “Introduction to MPLAB” seminar first. The MPLAB IDE desktop has all the standard
