JQ RELAYS - Static6.arrow

VDEPartly to Be Discontinued:10A type (Made in Thailand)Last time buy: 12/20181a/1c 5A/10A small powerrelaysRoHS compliantJQ RELAYSFEATURESTYPICAL APPLICATIONS High electrical noise immunity High switching capacity in a compactpackage High sensitivity: 200 mW (1a),400 mW (1c) High surge voltage: 8,000 V betweencontacts and coil UL, CSA, VDE, SEMKO approved andTÜV available Class B coil insulation type alsoavailable. Air conditioners Refrigerators Microwave ovens HeatersORDERING INFORMATIONJQFContact arrangement1a: 1 Form A1 : 1 Form CContact capacityNil: Standard (5A)P: High capacity (10A)Coil insulation classNil: Class E coil insulationB: Class B coil insulation (UL)Nominal coil voltage (DC)5V, 6V, 9V, 12V, 18V, 24V, 48V*Contact materialF: AgSnO2 typeCertified by UL, CSA, VDE and SEMKONote: *Available only for 1 Form C typeTYPES1) Standard typeStandard typeNominal coil voltage5V DC6V DC9V DC12V DC18V DC24V DC48V DC1 Form APart JQ1a-24V-F–High capacity type1 Form CPart 4V-FJQ1-48V-F1 Form APart 18V-FJQ1aP-24V-F–1 Form CPart JQ1P-24V-FJQ1P-48V-FStandard packing: Carton 100 pcs., Case 500 pcs.–1–Downloaded from Arrow.com.ASCTB185E 201509-T

Partly to Be Discontinued: 10A type (Made in Thailand)Last time buy: 12/2018JQRATING1. Coil dataContactNominal coilarrangementvoltage1 Form A1 Form C5V DC6V DC9V DC12V DC18V DC24V DC5V DC6V DC9V DC12V DC18V DC24V DC48V DCPick-up voltage(at 20 C 68 F)Standard type:75%V or less ofnominal voltage (Initial)High capacity type:80%V or less ofnominal voltage (Initial)Standard type:75%V or less ofnominal voltage (Initial)High capacity type:80%V or less ofnominal voltage (Initial)Drop-outvoltage(at 20 C 68 F)Nominal operatingcurrent[ 10%] (at 20 C 68 F)5%V or more ofnominal A1251804057201,6202,8805%V or more ofnominal voltage(Initial)80 mA66.7mA44.4mA33.3mA22.2mA16.7mA8.3mA62.5Ω90 Ω202.5Ω360 Ω810 Ω1,440 Ω5,760 ΩCoil resistance[ 10%] (at 20 C 68 F)Nominal operatingpower(at 20 C 68 F)ΩΩΩΩΩΩMax. applied voltage180% of nominal voltage(at 20 C 68 F)200mW130% of nominal voltage(at 70 C 158 F)[When using relays at85 C 185 F, see Notes*4]150% of nominal voltage(at 20 C 68 F)400mW110% of nominal voltage(at 70 C 158 F)[When using relays at85 C 185 F, see Notes*4]2. ntContact resistance (Initial)Contact materialNominal switching capacity (resistive load)RatingMax. switching power (resistive load)Max. switching voltageMax. switching currentNominal operating powerMin. switching capacity (reference value)*1Insulation resistance (Initial)Breakdown voltage(Initial)Between open contactsBetween contact and coilTemperature rise (coil)ElectricalcharacteristicsSurge breakdown voltage*2(Between contact and coil) (Initial)Operate time (at nominal voltage) (at 20 C 68 F)(Initial)Release time (at nominal voltage) (at 20 C 68 n resistanceDestructiveMechanical (at 180 times/min.)Shock resistanceMechanicalcharacteristicsExpected lifeConditionsConditions for operation, transport and storage*3Max. operating speedUnit weightSpecificationsStandard typeHigh capacity type1 Form C1 Form A1 Form CMax. 100mΩ (By voltage drop 6 V DC 1 A)AgSnO2 typeN.O. side:N.O. side:5 A 125 V AC,10 A 125 V AC,2 A 250 V AC,5 A 250 V AC,5 A 125 V AC,10 A 125 V AC,3 A 30 V AC5 A 30 V AC2 A 250 V AC,5 A 250 V AC,N.C. side:N.C. side:5 A 30 V DC5 A 30 V DC2 A 125 V AC,3 A 125 V AC,1 A 250 V AC,2 A 250 V AC,1 A 30 V DC1 A 30 V DCN.O. side:N.O. side:625 VA, 90 W1,250 VA, 150 W625 VA, 150 W1,250 V AC, 150 WN.C. side:N.C. side:250 VA, 30 W500 V AC, 30 W250 V AC, 110 V DC (0.3A)N.O.: 5 A, N.C.: 2 AN.O.: 10 A, N.C.: 3 A200 mW400 mW200 mW400 mW100 mA, 5 V DCMin. 1,000 MΩ (at 500 V DC) Measurement at same location as “Breakdown voltage” section.1 Form A1,000 Vrms for 1 min.750 Vrms for 1 min.1,000 Vrms for 1 min.750 Vrms for 1 min.4,000 Vrms for 1 min. (Detection current: 10 mA)Max. 45 C 113 FMax. 45 C 113 F(By resistive method, nominal coil voltage(By resistive method, nominal coil voltageapplied to the coil; contact carrying current:applied to the coil; contact carrying current:5A, at 70 C 158 F)10A, at 70 C 158 F)8,000 VMax. 20 ms (excluding contact bounce time.)Max. 10 ms (excluding contact bounce time) (Without diode)294 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)980 m/s2 (Half-wave pulse of sine wave: 6 ms.)10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10μs.)10 to 55 Hz at double amplitude of 2.0 mmMin. 107Ambient temperature: –40 C to 70 C –40 F to 158 F (class E insulation),–40 C to 85 C –40 F to 185 F*4 (class B insulation)Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)20 times/min. (at nominal switching capacity)Approx. 7 g .25 oz* Specifications will vary with foreign standards certification ratings.Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with theactual load.*2. Wave is standard shock voltage of 1.2 50μs according to JEC-212-1981*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storageconditions in NOTES.*4. When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1 C 33.8 F with20 C 68 F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range.–2–Downloaded from Arrow.com.ASCTB185E 201509-T

Partly to Be Discontinued: 10A type (Made in Thailand)Last time buy: 12/2018JQ3. Expected electrical lifeTypeSwitching capacity5 A 125 V AC3 A 125 V AC2 A 250 V AC5 A 30 V DC5 A 125 V AC3 A 125 V AC2 A 250 V AC3 A 30 V DC2 A 125 V AC1 A 250 V AC1 A 30 V DC10 A 125 V AC5 A 250 V AC5 A 30 V DC10 A 125 V AC5 A 250 V AC5 A 30 V DC3 A 125 V AC2 A 250 V AC1 A 30 V DC1 Form AStandard typeN.O.1 Form CN.C.1 Form AN.O.High capacity type1 Form CN.C.No. of operations5 1042 1052 1051055 1042 1052 1051052 1052 1051055 1045 1041055 1045 1041052 1052 105105REFERENCE DATA1.-(1) Max. switching capacity (1 Form A type)1.-(2) Max. switching capacity (1 Form C type)100Contact current, AContact current, A100AC resistive load (High capacity type)105100 25010532AC resistive load1 (High capacity type)N.C. sideAC resistive load(Standard type)N.C. side1 AC resistive load (Standard type)10AC resistive load(High capacity type) N.O. sideAC resistive load(Standard type) N.O. side101,000100 2501,000Contact voltage, VContact voltage, VStandard type2. Life curve3.-(1) Operate & release time (1 Form A type)3.-(2) Operate & release time (1 Form C type)Ambient temperature: room temperatureTested sample: JQ1a-12V-F, 25 pcs.Tested sample: JQ1-24V-F, 25 pcs.125V ACresistive load10250V ACresistive load86Operate time42Release time101234Contact current, A508010086Operate time4Max.Max.Min.Min.2Release time150Coil applied voltage, %V–3–Downloaded from Arrow.com.120Max.Max.Min.Min.Operate & release time, msOperate & release time, msLife, 104100080100120150Coil applied voltage, %VASCTB185E 201509-T

Downloaded from Arrow.com.

Downloaded from Arrow.com.

Downloaded from Arrow.com.

6V DC 66.7mA 90 9V DC 44.4mA 202.5 12V DC 33.3mA 360 18V DC 22.2mA 810 24V DC 16.7mA 1,440 48V DC 8.3mA 5,760 Characteristics Item Speci cations Standard type High capacity type . 5 A 125 V AC, 2 A 250 V AC, 5 A 30 V DC N.O. side: 5 A 125 V AC, 2 A 250 V AC, 3 A 30 V AC N.C. side: 2 A 125 V AC, 1 A 250 V AC, 1 A 30 V DC 10 A 125 V AC, 5 A 250 .