TFT Monitors For Fanuc Cnc Controls - ADM Electronic
ReplacementTFT-LCD MonitorSeries: FanucThe TFT-Industrial-Monitor is a modern concept to replaceold or defective 9” CRT monitors mounted in control unitsof FANUC.All units are Made in Germany, using only high qualitycomponents. A mechanic housing, similar to the originalunit, makes ist easy to exchange in just a few minutes.The new display is 100% compatible.For Fanuc Series 0, 0-B, 0M, 0T, 6, 6B, 6BT, 6M,6MB, 6T, 11, 11M, 11T, 15, 15-M, 16, 16-L, 18, 202362819 / MonochromMohrom / 24V DC- Connector: 20-pin/3rows HONDA maleFanuc special timingmech. type: Chassis with gasketConnector monitor: HONDA male (2362819)9-pin D-Sub (2361138)Input voltage: 24V DC (2362819)230V AC (2361138)TFT-Display (LED): 8.4” active matrixResolution: 800 x 600Brightness: 250 cd/m²Contrast ratio: 600:1Backlight lifetime: min. 20.000 h2361138 / Color / 230V AC- Connection via adapter cable(9-pin D-Sub 20-pin/3rows HONDA male)VDE 0100, 0411, 0804, 0871B and CE-MarkAccessories kit 2361138: adapter cableOrder-No.:8.4” Fanuc (replacement for A61L-0001-0071/72/76/79/86/92/93)8.4” Fanuc (replacement for A61L-0001-0090/95)AUG14 Rev.1.5ADM electronic GmbHMühlweg 2, 82054 Sauerlachpage 1/6Tel. 49(0)8104-62963-0Fax 49(0)8104-62963-2223628192361138Subject to change without prior notice and any misprints!E-Mail: info@adm-electronic.deInternet: www.adm-electronic.de
ReplacementTFT-LCD MonitorSeries: Fanuc2363045The TFT-Industrial-Monitor is a modern concept to replaceold or defective 9” TFT-LCD Displays mounted in controlunits of FANUC.All units are Made in Germany, using only high qualitycomponents. A mechanic housing, similar to the originalunit, makes ist easy to exchange in just a few minutes.The new display is 100% compatible.For Fanuc Series 16-LFanuc special timingmech. type: ChassisConnector monitor: 9-pin D-Sub (2rows)Input voltage: 24V DC- Connection via adapter cable(9-pin D-Sub 20-pin/2rows HONDA male)(9-pin D-Sub 20-pin/2rows HONDA female)TFT-Display (LED): 8.4” active matrixResolution: 800 x 600Brightness: 250 cd/m²Contrast ratio: 600:1Backlight lifetime: min. 20.000 hVDE 0100, 0411, 0804, 0871B and CE-MarkAccessories kit: adapter cableOrder-No.:8.4” Fanuc (replacement for LCD MDI Unit A02B-0200-C061/MBS)AUG14 Rev.1.5ADM electronic GmbHMühlweg 2, 82054 Sauerlachpage 2/6Tel. 49(0)8104-62963-0Fax 49(0)8104-62963-222363045Subject to change without prior notice and any misprints!E-Mail: info@adm-electronic.deInternet: www.adm-electronic.de
ReplacementTFT-LCD MonitorSeries: Fanuc2363878 / 2363879- Connector: 20-pin/2rows HONDAHONDOND maleThe TFT-Industrial-Monitor is a modern concept to replaceold or defective 8.4” TFT-LCD Displays mounted in controlunits of FANUC.All units are Made in Germany, using only high qualitycomponents. A mechanic housing, similar to the originalunit, makes ist easy to exchange in just a few minutes.The new display is 100% compatible.For LCD/MDI Unit A02B-0222-C136/MAR / Series 18-MLCD/MDI Unit A02B-0120-C131/TAR,LCD/MDI Unit A02B-0120-C131/TAS / Series 18-TFanuc special timingmech. type: ChassisConnector monitor: HONDA male (20-pin/2rows)LCD Unit A02B-0222-C136/MARInput voltage: 24V DCTFT-Display (LED): 8.4” active matrixResolution: 800 x 600Brightness: 250 cd/m²Contrast ratio: 600:1Backlight lifetime: min. 20.000 hLCD Unit A02B-0120-C131/TASVDE 0100, 0411, 0804, 0871B and CE-MarkOrder-No.:8.4” Fanuc (replacement for LCD/MDI Unit A02B-0222-C136/MAR)23638788.4” Fanuc (replacement for LCD/MDI Unit A02B-0120-C131/TAR / TAS) 2363879AUG14 Rev.1.5ADM electronic GmbHMühlweg 2, 82054 Sauerlachpage 3/6Tel. 49(0)8104-62963-0Fax 49(0)8104-62963-22Subject to change without prior notice and any misprints!E-Mail: info@adm-electronic.deInternet: www.adm-electronic.de
ReplacementTFT-LCD MonitorSeries: Fanuc2363877 / 2363881- Connector: 20-pin/2rows HONDA maleThe TFT-Industrial-Monitor is a modern concept to replaceold or defective 9.5” TFT-LCD Displays mounted in controlunits of FANUC.All units are Made in Germany, using only high qualitycomponents. A mechanic housing, similar to the originalunit, makes ist easy to exchange in just a few minutes.The new display is 100% compatible.For LCD Unit A02B-0163-C332 / Series 15-MLCD/MDI Unit A02B-0200-C061,LCD/MDI Unit A02B-0200-C061/MB,LCD Unit A02B-0163-C332LCD/MDI Unit A02B-0200-C061/TBS / Series 16-MFanuc special timingmech. type: ChassisConnector monitor: HONDA male (20-pin/2rows)Input voltage: 24V DCTFT-Display (LED): 10.4” active matrixResolution: 800 x 600Brightness: 250 cd/m²Contrast ratio: 500:1Backlight lifetime: min. 30.000 hLCD/MDI Unit A02B-0200-C061/MBVDE 0100, 0411, 0804, 0871B and CE-MarkOrder-No.:10.4” Fanuc (replacement for LCD Unit A02B-0163-C332)236387710.4” Fanuc (replacement for LCD/MDI Unit A02B-0200-C061 / MB / TS) 2363881AUG14 Rev.1.5ADM electronic GmbHMühlweg 2, 82054 Sauerlachpage 4/6Tel. 49(0)8104-62963-0Fax 49(0)8104-62963-22Subject to change without prior notice and any misprints!E-Mail: info@adm-electronic.deInternet: www.adm-electronic.de
ReplacementTFT-LCD MonitorSeries: Fanuc2363880 / 2363882ONDA male- Connector: 20-pin/2rows HONDAThe TFT-Industrial-Monitor is a modern concept to replaceold or defective 9.4 / 10.4” TFT-LCD Displays mounted incontrol units of FANUC.All units are Made in Germany, using only high qualitycomponents. A mechanic housing, similar to the originalunit, makes ist easy to exchange in just a few minutes.The new display is 100% compatible.For LCD/MDI Unit A02B-0120-C061/TA,LCD/MDI Unit A02B-0120-C061/WA / Series 16-TTLCD Unit A02B-0200-C115 / MSC 518 FANUCFanuc special timingmech. type: ChassisLCD MDI Unit A02B-0120-C061/TAConnector monitor: HONDA male (20-pin/2rows)Input voltage: 230V AC (2363880)24V DC (2363882)TFT-Display (LED): 10.4” active matrixResolution: 800 x 600Brightness: 250 cd/m²Contrast ratio: 500:1Backlight lifetime: min. 30.000 hVDE 0100, 0411, 0804, 0871B and CE-MarkLCD Unit A02B-0200-C115Order-No.:10.4” Fanuc (replacement for LCD/MDI Unit A02B-0120-C061/TA / WA) 236388010.4” Fanuc (replacement for LCD Unit A02B-0200-C115)2363882AUG14 Rev.1.5ADM electronic GmbHMühlweg 2, 82054 Sauerlachpage 5/6Tel. 49(0)8104-62963-0Fax 49(0)8104-62963-22Subject to change without prior notice and any misprints!E-Mail: info@adm-electronic.deInternet: www.adm-electronic.de
ReplacementTFT-LCD MonitorSeries: FanucThe TFT-Industrial-Monitor is a modern concept to replaceold or defective 12 or 14” CRTs mounted in control unitsof FANUC.All units are Made in Germany, using only high qualitycomponents. A mechanic housing, similar to the originalunit, makes ist easy to exchange in just a few minutes.The new display is 100% compatible.2361136 / 10.4”- Chassis with curve / angles- Connection via adapter cableble(9-pin D-Sub 20-pin/3rows HONDA male)For Fanuc Series 0, 3, 6, 10, 11, 15, 16, 18, 20Fanuc special timingmech. type: Chassis with curve (2361136) /with front plate (2361135)Curve / Front plate with antireflex coated glassConnector monitor: 9-pin D-Sub (2rows)Input voltage: 230V AC2361135 / 12.1”- Chassis mit front plate- Connection via adapter cable(9-pin D-Sub HONDA)TFT-Display: 10.4” / 12.1” active matrixResolution: 800 x 600Brightness: min. 250 cd/m²Contrast ratio: min. 400:1Backlight lifetime: min. 30.000 hAdapter cable- 9-pin D-Sub 20-pin/3rows HONDA male- 9-pin D-Sub 20-pin/2rows HONDA male- 9-pin D-Sub 20-pin/2rows HONDA femaleVDE 0100, 0411, 0804, 0871B and CE-MarkAccessories kit: adapter cableOrder-No.:10.4” Fanuc (replacement for 12”CRT A61-0001-0077/87)12.1” Fanuc (replacement for 14”CRT A61-0001-0074/94/96)AUG14 Rev.1.5ADM electronic GmbHMühlweg 2, 82054 Sauerlachpage 6/6Tel. 49(0)8104-62963-0Fax 49(0)8104-62963-2223611362361135Subject to change without prior notice and any misprints!E-Mail: info@adm-electronic.deInternet: www.adm-electronic.de
8.4” Fanuc (replacement for LCD MDI Unit A02B-0200-C061/MBS) 2363045 The TFT-Industrial-Monitor is a modern concept to replace old or defective 9” TFT-LCD Displays mounted in control units of FANUC. All units are
fanuc cnc (new 2000) tshudin # pl-45 cnc cylindrical grinder w/ fanuc cnc (new 2004) micron # mfn-350-rdt cnc centerless grinder w/ fanuc cnc okamoto # acc-1224-ex 12”x . miyano # lz-oir cnc lathe w/ fanuc cnc miyano # bnd-42s2 cnc lathe w/ lns bar-feed & fanuc cnc
FANUC Series 0–MC FS0–MC Servo Amplifier Module SVM FANUC Series 15 FS15 Spindle Amplifier Module SPM FANUC Series 16 FS16 FANUC Series 18 FS18 FANUC Series 20 FS20 FANUC Series 21 FS21 FANUC Power Mate MODEL D PM–D FANUC Power Mate MODEL F PM–F In this manual, the servo parameter number is explained as shown below. (Example) 1877 8X62
fanuc ac servo motor βis series descriptions b-65302en fanuc ac servo motor αis/αi/βis series parameter manual b-65270en fanuc ac spindle motor αi series descriptions b-65272en fanuc ac spindle motor βis series descriptions b-65312en fanuc ac spindle motor αi/βi series parameter manual b-65270en fanuc servo amplifier αi .
FANUC:A04B-0234-C222 Pendant Box for B, C, iA, iB, iC. FANUC:A04B-0281-K020 Bolt Set Includes iE. FANUC:A04B-0311-5026#HGP Grease Gun. FANUC:A04B-0313-J023#COM Vertical Wire Alignment Block iA,iB,iC,iD,iE, CiA. FANUC:A04B-0325-J095#FIN DI/DO Unit for CiA-400&600 . FANUC:A06B-0114-B103 Servo Motor C3 Axis. FANUC:A06B-6117-H302 Servo Amp .
FANUC CNC systems and the knowledge that comes with almost 60 years of experience in the continuous development of CNC technology. More than 4 million FANUC CNC systems installed worldwide and a 65 % market share bear witness to FANUC quality. Advanced CNC systems call for comprehensive support Offering all the help and advice you will ever .
should bear in mind when handling the CNC to use a machine with the CNC more safely. WARNING 1 SERVO GUIDE is the software for only tuning servo system. Don't use this software for normal . CNC models Abbreviations FANUC Series 30i-MODEL A Series 30i FANUC Series 31i-MODEL A FANUC Series 31i-MODEL A5 Series
3. Classroom activities away from machines use FANUC’s NCGuide simulation software or FANUC’s CNC education hardware simulator to maximize control exposure 4. Students have access to training carts or other FANUC controlled CNC machine tools at least 50% of the time, and
6 MATHEMATICS - Week 1 Lesson 2: Irrational Numbers Learning Objective: Students will be able to give an approximate value of an irrational numbers using rational numbers on a number line. Math Standards: 8.NS.A.2: Use rational approximations of irrational numbers to compare the size of irrational numbers. Locate them approximately on a number line diagram and estimate their values.
