ROTARY CUTTER
XH1500/XH1000 SERIES 2ROTARY CUTTERPublished 07/04S/N C30102674401 - C30102927407 inclusiveS/N C30200625402 - C30200685407 inclusivePart No. C301-010PPARTS MANUALAn Operators Manual with IMPORTANT Safety, Assembly, Operationand Maintenance information was packaged with this Parts Manualduring final inspection at the factory. If the Operators Manual ismissing at any time, please contact Schulte Industries Ltd. at (306) 2873715 to receive your free replacement manual.Schulte Industries Ltd.P.O. Box 70Englefeld SaskatchewanCanada S0K 1N0Tel. (306) 287-3715Fax. (306) 287-3355Parts Fax. (306) 287-4066Email: info@schulte.ca73747 130TH STZEARING IA 50276641-487-7608INFO@NESSAINC.COMWWW.NESSAINC.COM 2004 Alamo Group Inc.
PARTS ORDERING GUIDEThe following instructions are offered to help eliminate delay and error in processing purchaseorders for the equipment in this section.1. The Purchase Order must include the name and address of the person or organization orderingthe parts, who should be charged, and if possible, the serial number of the machine for which theparts were ordered.2. The Purchase Order must clearly list the quantity of each part, the complete and correct partnumber, and the description of the part.3. Schulte Industries Ltd reserves the right to substitute parts where applicable.4. Schulte Industries Ltd reserves the right to change prices without prior notice.NOTE:Please refer to the Safety Section in the front of the Operators Manual for the properPart Number when ordering Replacement Safety Decals. Safety decals areavailable free of charge from the Schulte Parts Department.NOTE:If the Operators Manual does not accompany this Parts Manual please obtain one,free of charge from the Schulte Parts Department. DO NOT operate this implementunless you READ, UNDERSTAND, and FOLLOW the Safety and Operationinstructions contained in the Operators ManualNOTE:Please note that the appearance of some parts may vary from the artwork shown inthe Manual.For maximum safety and to guarantee optimum product reliability, always use genuineSchulte Parts. The use of inferior replacement parts may cause premature orcatastrophic failure which could result in serious injury or death. Direct any questionsregarding parts to:Schulte Industries Ltd P.O. Box 70Englefeld, SaskatchewanCanada S0K 1N0Phone: (306)-287-3715Parts Fax: (306) 287-4066Email: info@schulte.ca6-2
TABLE OF CONTENTSCENTER SECTION FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4WING FRAME, RIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6WING FRAME, LEFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8STANDARD HITCH FRAME & CENTER WHEEL BEAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10PRECISION CLEVIS (C000-360) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12PRECISION HITCH (C000-300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13EQUAL ANGLE HITCH KIT (C301-180) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14SCREW JACK, 15" SIDE WIND (232-600) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1610' SKIRT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17BLADE CARRIERS - 2 BLADE, 3/16" PAN SKIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18BLADE CARRIERS - 2 BLADE, 1/4" PAN SKIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20BLADE CARRIERS - 3 BLADE, BENT BAR STYLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22BLADE CARRIERS - 3 BLADE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-24HUB, AXLE, TIRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26WING WALKING AXLE KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28CHAIN GUARD KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-30DRIVELINE SHIELDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-32WING LIFT CIRCUIT, STANDARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-34WING LIFT CYLINDER, RAM (100-3750) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-35PHASING CIRCUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-36PHASING CYLINDERS, RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-37MAIN LIFT CIRCUIT, STANDARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-38MAIN LIFT CYLINDER, 3-1/2" x 5", MONARCH (100-3602) . . . . . . . . . . . . . . . . . . . . . . . . . 6-39SPOOL VALVE KIT, XH1500 (C301-805) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-40SPOOL VALVE KIT, XH1000 (C302-805) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-41DOUBLE ACTING WING CYLINDER KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-42TOWING HITCH KIT (C301-320) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-43WING WHEEL SHIELD KIT (C301-330) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-44TRANSPORT KITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-45WING WINCH KIT (C301-300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46CENTER UNIVERSAL JOINT, SIZE 6 (540/1000 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-47WING UNIVERSAL JOINT, SIZE 6 (540/1000 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48SLIP CLUTCH, FT42/6 (540/1000 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-50SLIP CLUTCH, FT32R/6 (1000 RPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-51TRACTOR UNIVERSAL JOINT, SIZE 8 w/ 80o C.V. (540 RPM) . . . . . . . . . . . . . . . . . . . . . . 6-52TRACTOR UNIVERSAL JOINT, SIZE 6 w/ 80o C.V. (1000 RPM) . . . . . . . . . . . . . . . . . . . . . 6-54TRACTOR U.V. JOINT, EQUAL ANGLE HITCH, 540 RPM (340-8231) . . . . . . . . . . . . . . . . 6-56TRACTOR U.V. JOINT, EQUAL ANGLE HITCH, 540 RPM (340-5503) . . . . . . . . . . . . . . . . 6-58DIVIDER GEARBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-60GEARBOX (330-806/ 330-808) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-62GEARBOX (330-806/ 330-808) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-63GEARBOX (330-805, 330-807) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-64GEARBOX (330-809) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-66GEARBOX (330-810) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-68PARTS INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-706-3
CENTER SECTION FRAMEJune 11, 20046-4
CENTER SECTION 262728293031323334353637383940414243444546June 11, 2004Part -018270-025280-201C000-001DescriptionSplitter box, 540 RPMSplitter box, 1000 RPMLoc k w ash er, 5/8Bolt, 5/8 x 1-1/2 UNCCe nter s ectio n as sem blyBolt, 5/8 x 3-1/2 UNCLock nut, 5/8 UNCSkid shoe mount assembly, right (shown)Sk id sh oe m oun t ass em bly, leftLock nut, ½ UNCFlat washe r, ½Skid shoePlow bolt, ½ x 1-1/2 UNCBo lt, ½ x 1-1/2Grease zerk, self tapRetaining pin, 2-1/2 U.L.Flat washe r, 1Roll pin, 3/8 x 2Retaining pin, 3-15/16 U.L.Retaining pin, 2-1/2 U.L.Bolt, 5/8 x 7 UNCSpacer pipePin, 6-5/16 U.L.Transport lock bar, rightTra nsp ort loc k ba r, leftTransport lock pin, 6-5/16 U.L.Lyn ch p in, 1/4Bolt, 3/8 x 1 UNCFlat washe r, 3/8Lock nut, 3/8 UNCBolt, 3/8 x 2 UNCW ing lift sp ace r plateWing transport pin, 5-9/16 U.L.Bolt, 3/8 x 1-1/4 UNCComplete, SMV signSM V m oun t plateGear box 540 RPM CWGear box 1000 RPM CWGear box 540 RPM CCWGearbox 1000 RPM CCWBolt, 5/8 x 2-1/2 UNCLoc k w ash er, 3/8Bo lt access cov er pla teFlat washe r, 5/8Bolt, 5/8 x 1-3/4 UNCHose organizerBolt, 1/4 x 1, UNCW ash er, 1/4Loc k N ut, 1/4Manual canisterHose 11111162122233311
WING FRAME, RIGHTJune 11, 20046-6
WING FRAME, 26272829303132333435363738394041424345June 11, 2004Part g assembly, rightRoll pin, 3/8 x 2Flat washe r, 1Wing lift pin, 2-13/32 U.L.Floating lugHinge pin, 22-27/32Bolt, ½ x 2-1/2 UNCRetaining pin, 2-3/16 U.L.Hinge Line spacer, 34-1/8 U.L.Flat washe r, ½Lock nut, ½ UNCHinge pin, 9 O.A.Hinge line spacer, 10-5/16 U.L.Hinge pin, 14-27/32 O.A.Bolt 5/16 x 1-1/2 UNCLock nut, 5/16 UNCRatchet jack, 18" CPCGrease nipple, self tapBolt, ½ x 1-3/4 UNCTension bushing, 1 x 1-1/4 x 3/4 longBolt, 3/4 x 5 UNCRetaining pin, 3 3/4 U.L.Bolt, ½ x 3/4 UNFWing wheel standard, rightRetaining pin, 9-1/16 U.L.Lock nut, 3/4 UNCRubber sandwichUpper rubber mountW ing adjus tme nt assem blyLoc k w ash er, 1-1 /4Plow bolt, ½ x 1-1/2 UNCHalf nut, 1-1/4 UNCGear box, 540 RPM, CCWGear box, 1000 RPM, CCWBolt, 5/8 x 2-1/2 UNCLock nut 5/8 UNCBolt, 3/8 x 1 UNCLock washer, 3/8"Blade bolt access coverSkid rearSkid front, rightHose organizer, 16"Washer, 5/8"Bolt, 5/8 x 1-3/4" UNCBo lt, ½ x 3-1/4 , UN C G r. 11111
WING FRAME, LEFTJune 11, 20046-8
WING FRAME, 6272829303132333435363738394041424345June 11, 2004Part 502-137228-011256-006250-093250-0503DescriptionW ing asse mb ly, leftRoll pin, 3/8 x 2Flat washe r, 1Wing lift pin, 2-13/32 U.L.Floating lugHinge pin, 22-27/32Bolt, ½ x 2-1/2 UNCRetaining pin, 2-3/16 U.L.Hinge Line spacer, 34-1/8 U.L.Flat washe r, ½Lock nut, ½ UNCHinge pin, 9 O.A.Hinge line spacer, 10-5/16 U.L.Hinge pin, 14-27/32 O.A.Bolt 5/16 x 1-1/2 UNCLock nut, 5/16 UNCRatchet jack, 18" CPCGrease nipple, self tapBolt, ½ x 1-3/4 UNCTension bushing, 1 x 1-1/4 x 3/4 longBolt, 3/4 x 5 UNCRetaining pin, 3 3/4 U.L.Bolt, ½ x 3/4 UNFW ing w hee l standard , leftRetaining pin, 9-1/16 U.L.Lock nut, 3/4 UNCRubber sandwichUpper rubber mountW ing adjus tme nt assem blyLoc k w ash er, 1-1 /4Plow bolt, ½ x 1-1/2 UNCHalf nut, 1-1/4 UNCGear box, 540 RPM, CWGear box, 1000 RPM, CWBolt, 5/8 x 2-1/2 UNCLock nut 5/8 UNCBolt, 3/8 x 1 UNCLoc k w ash er, 3/8Blade bolt access coverSkid rearSk id fron t leftHose organizer, 16"Washer, 5/8"Bolt, 5/8 x 1-3/4" UNCBo lt, ½ x 3-1/4 , UN C G r. 11111
STANDARD HITCH FRAME & CENTER WHEEL BEAMJune 11, 20046-10
STANDARD HITCH FRAME & CENTER WHEEL e 11, 2004Part 56-003270-001300-008DescriptionPrecision clevis (see detail next page)Grease nipple, self tapBolt, 5/8 x 1-3/4 UNCRetaining pin, 1 x 4-5/8 U.L.Flat washe r, 1/2Bolt, 1/2 x 1-3/4 UNCMachine bushing,1-1/2 x 2-1/4 x 10 gaLock nut, 1/2 UNCLock nut, 5/8 UNCPivoting jack mountTension bushing, 1-1/2 x 1-3/4 x 3/4 longHitch cle vis a sse mb lyTension bushing, 1 x 1-1/4 x 3/4 longTension bushing, 1 x 1-1/4 x 1 longFlat washe r, 1Roll pin, 3/8 x 2Lift rod, leftLift rod, Right (Shown)Re taining pinRetaining pin, 1 x 4-3/8 U.L.Half nut, 1 UNCLift rod lugBolt, 1/2 x 1-1/2 UNCRe taining pinWalking axle spacer sleeveSealBearingRacePivot pin, walking beamMachine bushing, 1-1/32 x 2 x 7gaCastle nut, 1 x 14 UNSCo tter pin, 3/16 x 1-1 /2Center se ction whee l standardTension bushing, 1 x 1-1/4 x 1-1/2 longBolt, 1/2 x 1-1/4 UNCLock washer, 1/2Hitch as sem blyWalking beam wheel standard, replacementPTO storage sup portBe nt hitch pin#10 hitch pin clipW alkin g be am , leftWalking beam, rightBo lt, 1/2 x 3 -1/4 U NC Gr. 8Solid TongueBearing kit. Includes #27, 28, 29Bolt, 3/4" x 2" UNCFlat washer, 3/4"Lock nut, 3/4" UNCLynch pin, 1111114122124
PRECISION CLEVIS (C000-360)Ref.123456June 11, 2004Part scriptionHitch blockTensio n bu shin g, 1" x 1-1/4 " x 1" lgW ear p lateSp ace r plateLockwasher, 5/8"Bolt, 5/8" x 2" UNC6-12Qty.121622
PRECISION HITCH (C000-300)Ref.12345678910111213June 11, 2004Part DescriptionBolt, 3/4 x 5-1/2 UNCBolt, ½ x 1-1/2 UNCBolt, 1-1/8 x 5-1/2 UNFDrawbar clevis topHitch tongueGrease nipple, 1/8 NPTSpacerDraw bar clevis baseLock nut, 1-1/8 UNFClamp barLock nut, 3/4 UNCLock washer, ½Co tter pin, 1/4 x 2-1/26-13Qty.2111131111211
EQUAL ANGLE HITCH KIT (C301-180)June 11, 20046-14
EQUAL ANGLE HITCH KIT (C301-180)C301-180Eq ual An gle H itch KitUs es 3 40-8 231 Bo nd ioli Tracto r Sh aft (540 rp m),340 -646 Bo nd ioli Tracto r Sh aft (1000 rpm ) or,3 40 -5 50 3 W e as le r Tractor S haft (540 rpm 28293031323334353637383940Part e 11, 2004DescriptionSwivel yokeHitch swivel frameSwivel hitch retainerBolt, 5/8" x 2" UNCBolt, 1/2" x 1" INCJack mountEqual angle hitchRe tainer pin, i1" x 9-1/2" ULWasher, 1" SAERe tainer pin, i1-1/2" x 7-3/16" ULWasher, 1/2" SAEMachine bushing, 1-1/2" x 2-1/4" x 10ga.Locknut, 5/8" UNCBolt, 5/8" x 1-3/4" UNCBolt, 3/4" x 2" UNCWasher, 3/4"Locknut, 3/4" UNCBolt, 1/2" x 2" UNCLocknut, 1/2" UNCSafety chain *attac hm ent link sh ow n on lyWasher, 1"Locknut, 1" UNCBolt, 1" x 3" UNCMount, PTO standGrease zerk, self tapSleeveHitch blockSpacer, 10gaSp ace r plateBolt, 1/2" x 1-3/4" UNCReplacement bushing, 1" x 1-1/4" x 1" longPT O c radleReplacement PTO spool, 4"De cal, “IM PO RT AN T.no n-C V s haft.”Replacement bushing, 1"x 1-1/4"x 3/4" longReplace. bushing, 1-1/2" x 1-3/4" x 1" longRoll pin, 3/8" x 2-1/2"Grease zerk, 90 self tapLock washer, 1/2"Roll pin, 3/8" x 2"6-15Qty.1112111111624221222111113118244111421141
SCREW JACK, 15" SIDE WIND (232-600)Ref.12345678910111213141516June 11, 2004Part 0232-611232-612DescriptionCoverBushingGearCarriage bolt, 1/4" x 3" UNCCotter pin, 1/8" x 1"DowelHa ndleNut, 1/4" UNCBodyPinBearingWasherAcme nutDowelAcme screwLeg6-16Qty.1222111211111111
10' SKIRT une 11, 2004Part 270-017256-017250-023DescriptionBolt, 1/2 x 1-1/2 UNCCh ain guard , doubleFlat washe r, 1/2Counter weightLock nut, 1/2 UNCBolt, 1/2 x 1-3/4 UNCRear hinge pin, 10'Sk irt ass em blyLock nut, 1" UNCFlat washe r, 1Bolt, 1 x 6 UNCBolt, 1 x 4 UNCRe ar sk idFro nt sk idPlo w bolt, 1/2 x 1-1/2Bolt, 5/8 x 4 UNCFro nt hinge p inFlat washe r, 5/8Lock nut 5/8 UNCChain, 5/16 proof, double, 13 linkLock nut, 3/8 UNCFlat washe r, 3/8Bolt, 3/8 x 1 3/4 UNC6-17Qty.21153152114422111041842121
BLADE CARRIERS - 2 BLADE, 3/16" PAN SKINJune 11, 20046-18
BLADE CARRIERS - 2 BLADE, 3/16" PAN SKINStandard BladesRef.1234567891011121313Part DescriptionBla de c arrier, 6ft, 3/16 " skin, comp leteBla de c arrier, 5ft, 3/16 " skin, comp letePan only, 6ft, 3/16"Pan only, 5ft, 3/16"Pa n rein force me nts, 5ftPa n rein force me nts, 6ftBu shin g, blade b oltLocknut, 1-1/8 -12 UNFBlade, 1/2" x 4" x 25", CW Super SuctionBlade, 1/2" x 4" x 25", CCW Super SuctionBlade, 1/2" x 4" x 28", CCW , Super SuctionBlade, 1/2" x 4" x 28", CW Super SuctionBlade bolt, 1-1/8 - 12 UNF, 1/2"Blade bolt & nut, 1/2"Qty.12124266222266Above blades have 19o scarf angle, 1/8 scarf edge* 15' OptionalOptional Updraft BladesRef.Part No.9401-04610401-04711401-048*12401-052* 15' OptionalDescriptionBlade, 1/2" xBlade, 1/2" xBlade, 1/2" xBlade, 1/2" x4" x4" x4" x4" x25",25",28",28",CWCCWCCWCWQty.2222Shredder Blade Kit (160-76)Ref.14141516Part No.251-014251-103401-033401-034DescriptionBla de b olt, shredd er kitBla de b olt & nut, shred der k itBlade, 3/8" x 4" x 25", wingBlade, 3/8" x 4" x 28", centerQty.6642Brush BladesRef.1718June 11, 2004Part No.401-016401-024DescriptionBrush blade, wingBrush blade, center6-19Qty.42
BLADE CARRIERS - 2 BLADE, 1/4" PAN SKINJune 11, 20046-20
BLADE CARRIERS - 2 BLADE, 1/4" PAN SKINStandard BladesRef.1234567891011121313Part 51-101DescriptionBla de c arrier, 6ft, 1/4" skin , com pleteBla de c arrier, 5ft, 1/4" skin , com pletePan only, 6ft, 1/4"Pan only, 5ft, 1/4"Pa n rein force me nts, 5ftPa n rein force me nts, 6ftBu shin g, blade b oltLocknut, 1-1/8 -12 UNFBlade, 1/2" x 4" x 25", CW Super SuctionBlade, 1/2" x 4" x 25", CCW Super SuctionBlade, 1/2" x 4" x 28", CCW , Super SuctionBlade, 1/2" x 4" x 28", CW Super SuctionBlade bolt, 1-1/8 - 12 UNF, 1/2"Blade bolt & nut, 1/2"Qty.12128466222266Above blades have 19o scarf angle, 1/8 scarf edge* 15' OptionalOptional Updraft BladesRef.Part No.9401-04610401-04711401-048*12401-052* 15' OptionalDescriptionBlade, 1/2" xBlade, 1/2" xBlade, 1/2" xBlade, 1/2" x4" x4" x4" x4" x25",25",28",28",CWCCWCCWCWQty.2222Shredder Blade Kit (160-76)Ref.14141516Part No.251-014251-103401-033401-034DescriptionBla de b olt, shredd er kitBla de b olt & nut, shred der k itBlade, 3/8" x 4" x 25", wingBlade, 3/8" x 4" x 28", centerQty.6642Brush BladesRef.1718June 11, 2004Part No.401-016401-024DescriptionBrush blade, wingBrush blade, center6-21Qty.42
BLADE CARRIERS - 3 BLADE, BENT BAR STYLEJune 11, 20046-22
BLADE CARRIERS - 3 BLADE, BENT BAR STYLEStandard BladesRef.12347891011121313Part ionBla de c arrier, 6ft, 1/4" skin , com pleteBla de c arrier, 5ft, 1/4" skin , com pletePan only, 6ft, 1/4"Pan only, 5ft, 1/4"Bu shin g, blade b oltLocknut, 1-1/8 -12 UNFBlade, 1/2" x 4" x 25", CW Super SuctionBlade, 1/2" x 4" x 25", CCW Super SuctionBlade, 1/2" x 4" x 28", CCW , Super SuctionBlade, 1/2" x 4" x 28", CW Super SuctionBlade bolt, 1-1/8 - 12 UNF, 1/2"Blade bolt & nut, 1/2"Qty.121299333399Above blades have 19o scarf angle, 1/8 scarf edge* 15' OptionalOptional Updraft BladesRef.Part No.9401-04610401-04711401-048*12401-052* 15' OptionalJune 11, 2004DescriptionBlade, 1/2" xBlade, 1/2" xBlade, 1/2" xBlade, 1/2" x6-234" x4" x4" x4" x25",25",28",28",CWCCWCCWCWQty.3333
BLADE CARRIERS - 3 BLADEJune 11, 20046-24
BLADE CARRIERS - 3 BLADEStandard BladesRef.12347891011121313Part ionBla de c arrier, 6ft, 1/4" skin , com pleteBla de c arrier, 5ft, 1/4" skin , com pletePan only, 6ft, 1/4"Pan only, 5ft, 1/4"Bu shin g, blade b oltLocknut, 1-1/8 -12 UNFBlade, 1/2" x 4" x 25", CW Super SuctionBlade, 1/2" x 4" x 25", CCW Super SuctionBlade, 1/2" x 4" x 28", CCW , Super SuctionBlade, 1/2" x 4" x 28", CW Super SuctionBlade bolt, 1-1/8 - 12 UNF, 1/2"Blade bolt & nut, 1/2"Qty.121299333399Above blades have 19o scarf angle, 1/8 scarf edge* 15' OptionalOptional Updraft BladesRef.Part No.9401-04610401-04711401-048*12401-052* 15' OptionalJune 11, 2004DescriptionBlade, 1/2" xBlade, 1/2" xBlade, 1/2" xBlade, 1/2" x6-254" x4" x4" x4" x25",25",28",28",CWCCWCCWCWQty.3333
HUB, AXLE, TIREJune 11, 20046-26
HUB, AXLE, TIRENOTE: When mounting tires, the wheel nut must be installedwith the flat face se ated against the lock wa she ne 11, 2004Part 01203-002DescriptionSp indle , 1-5/8 x 13, S517, centerSp indle , 1-5/8 x 10-3/8, S 517 , wingsHub, complete, HA517Seal retainerV-sealSeal counterfaceCup & coneW hee l stud boltGrease fittingCup & coneWasherHex nutCo tter pinDust capTire, solid laminated complete, 6 x 9Tire, solid laminated, 6 x 9W hee l half, 6 x 9, 5 bo ltNut, 3/8 UNCLock washer, 3/8"Bolt, 3/8 x 1 UNCLoc k w ash er, 1/2Wheel nutAirc raft tire 22 x 6.6 x 10 co mp leteTube a nd liner kit for 22 x 10 Aircraft tireBolt 1/2 x 3-1/4, UNC Grade 8Lock nut, 1/2W hee l bearing k it, incl ref# 3-6, 9, 13Ce nter h ub & spin dle, incl ref# 1a & 2W ing hub & spin dle, inc ref# 1b & 26-27Qty.11111511111111255555611
WING WALKING AXLE KITJune 11, 20046-28
WING WALKING AXLE KITIMPORTANT: WING WALKING AXLE ONLYNOTE: When mounting tires, the wheel nut must be installedwith the flat face se ated against the lock wa she r.C301-260C301-265Rig ht W ing W alkin g A xleLeft W ing W alkin g A xleRef.123456789101112121313141516171819202122Part 011270-007250-0503207-057June 11, 2004DescriptionPivot pin, walking beamBearingRaceSe alCastellated nut, 1 x 14 UNS , H618Bolt, ½ x 1-1/4 UNCLock washer, ½"Bu shin g, 1-1 /32 x 2, 7 G A, plainCotter pin, 3/16 x 1-1/2 platedGrease zerk, self-tapSp ace r slee ve, w alkin g ax leW ing w alkin g standa rd, leftWing walking standard, right (Shown)W ing w alkin g be am , leftWing walking beam, right (Shown)Hu b as sem bly, com pleteTire, solid lam, complete, 6 x 9Airc raft tire 22 x 6.6 x 10 co mp leteWheel nutSp indle , Remo vab le AxleFlat washe r, ½Loc k nu t, ½Bolt, ½ x 3-1/4, UNCBe aring kit, inclu des #2, 3, 46-29Qty.24442222224411114442042222
CHAIN GUARD KITSJune 11, 20046-30
CHAIN GUARD KITSC301-550Do ub le Chain G uard K itRef.1234567891011121314151617Part 270-007250-051C301-554C301-556C301-520Ca ble T hru Ch ains KitRequires C301-550Ref.181920212223Part No.221-413221-415221-416221-421221-419222-003June 11, 2004DescriptionChain guard double, wing frontCh ain guard dou ble, cente r front e xt.Ch ain guard dou ble, cente r front int.Chain guard double, center rearChain gu ard double, w ing rearCh ain guard dou ble, w ing rear ex t.Bolt, 3/8 x 2-1/2 UNCFlat washe r, 3/8Loc k nu t, 3/8Chain, 5/16 proof coil, 11 linksBolt, ½ x 4 UNCBolt, ½ x 1-1/4 UNCFlat washe r, ½Lock nut, ½ UNCBolt, ½ x 3Chain guard double, center rear exteriorChain guard double, wing rear interiorDescriptionCable, chain guard,Cable, chain guard,Cable, chain guard,Cable, chain guard,Cable, chain guard,Cable clamp, 1/8"6-3173" long26 3/4" long22" long69" long82" longQty.42122224247455554422Qty.2212116
DRIVELINE SHIELDINGJune 11, 20046-32
DRIVELINE June 11, 2004Part 20341-600DescriptionCe nter s ectio n sh ield asse mb lyLock washer, 5/16"Bolt, 5/16 x 3/4 UNCLynch pin, 1/4 standardSplitter shield mountSh ield hinge pinBolt, M8 X 20mmSplitter shield rest bracketCotter pin, 1/8 X 1Splitter gearbox, 540 RPMSplitter gearbox, 1000 RPMCenter gearbox pivot shield mount10' Center gearbox pivot shield mountLock nut, 3/8 UNCBolt, 3/8 x 3 UNCLeft w ing gearb ox p ivot shieldWing gearbox pivot mountRig ht wing gearb ox s hieldGearbox (see deck drawing)Gearbox (see deck drawing)Gearbox (see deck drawing)Bolt, 5/16 x 3/4 UNCFlat washer, 5/16Sh aft cover plas tic, 10' units6-33Qty.116431312261111441211112121
WING LIFT CIRCUIT, STANDARDRef.12345891011121314June 11, 2004Part onCyl. 3 X 12 ORBBreather, filter 3/4- 16 ORBElb ow , 3/4" O RB ma le X JIC ma leHose assembly, 3/8 SW , 183" longBrass restrictorPin, 1 x 3-13/32Re tainer pin, 1 x 4 U .L.Roll pin, 3/8 x 2Flat washer, 1 x 2Bolt, ½ x 1-1/2, UNCFlat washe r, ½Lock nut, ½, UNC6-34Qty.222222266222
WING LIFT CYLINDER, RAM (100-3750)Ref.123456June 11, 2004Part iptionRodCasingGlandPiston nutPistonSe al kit6-35Qty.111111
PHASING CIRCUITRef.12356789101113142021232425June 11, 2004Part 1-020262-006C502-193C502-194DescriptionHose assembly 3/8 SW, 166" longPhasing Cylinder, 3-1/2 x 5Hose assembly, 3/8 SW , 91" longBrass restrictor,Flat washer, 1 x 2Elb ow , 3/4 O RB ma le X JIC ma lePhasing Cylinder, 3-1/4 x 5Hose assembly, 3/8 SW , 186" longPhasing Cylinder, 3 x 5Hose assembly, 3/8 SW , 269" longCo tter pin, 3/16 x 1-1 /2Clevis pin, 1 x 2-7/8 U.L.Elbow, 45o OR B x JICDepth stopRoll pin, 3/8 x 2Pin, center section cylinderSle eve , cylinder p in6-36Qty.11116511116613111
PHASING CYLINDERS, RAMRef.123456789101112June 11, 20043"Part "Part "Part iptionPhasing CylinderCasingPiston nutPistonWear ringSe al kitGlandRodStro ke c ontro l ass em blyJam nut, 1-1/4" UNFNut, 5/16" UNCBolt, 5/16" x 2", UNCClevis end6-37Qty.111111111111
MAIN LIFT CIRCUIT, STANDARDRef.123456789101112June 11, 2004Part onMain Lift Cylinder, 3-1/2 x 5WasherBreather, filter, 3/4-16 ORBHose assembly, 3/8 x 166"Clevis pin, 1" x 2-7/8"Cotter pin, 3/16" x 1-1/2"Elbow, 45o 3/4 O RB x 3/4 JICBrass restrictorDepth stopRoll pin, 3/8 x 2Pin, center section cylinderSle eve , cylinder p in6-38Qty.111111111111
MAIN LIFT CYLINDER, 3-1/2" x 5", MONARCH (100-3602)Ref.12341718202541June 11, 2004Part 17101-020101-064WDescriptionCasingCylinder headPistonRodRo d cle visBolt, 3/8" x 1-3/4" UN C, Gr 5Locknut, 3/8" UNCStro ke c ontro l ass em blySeal kit, includes #10, 11, 13-15, 406-39Qty.111111111
SPOOL VALVE KIT, XH1500 (C301-805)16101-0720Rod cap, ORB1Ref.1234567891011Part 06111-207111-237127-202108-0071DescriptionElb ow , 3/4 O RB x 3/4 JICReducer, 3/4 ORB x ½ NPTFElb ow , 3/4 - 16 JICElb ow , 3/4 O RB x 3/4 JICHose assembly, 3/8 x 226" longHose assembly, 3/8 x 329" longHose assembly, 3/8 x 243" longHose assembly, ½ x 60" longHose assembly, ½ x 72" longValve, 3 spoolBrass restrictorQty.61131141113June 11, 20046-40
SPOOL VALVE KIT, XH1000 (C302-805)Ref.1234567891011June 11, 2004Part 06111-207111-237127-201108-0071DescriptionElb ow , 1/2 N PT x 3/4 JICReducer, 3/4 NPTM x ½ NPTFElb ow , 3/4 - 16 JICElb ow , 3/4 O RB x 3/4 JICHose assembly, 3/8 x 226" longHose assembly, 3/8 x 329" longHose assembly, 3/8 x 243" longHose assembly, ½ x 60" longHose assembly, ½ x 72" longValve, 2 spoolBrass restrictor6-41Qty.52121121112
DOUBLE ACTING WING CYLINDER KITSC301-815 Double Acting Cylinder Kit, “Tee” ConnectionRef.1234Part No.108-005108-043111-218111-219DescriptionMa le tee, 3
22 C301-117 Transport lock bar, right 1 23 C301-116 Transport lock bar, left 1 24 C502-165 Transport lock pin, 6-5/16 U.L. 1 25 300-012 Lynch pin, 1/4 3 26 250-018 Bolt, 3/8 x 1 UNC 4 27 256-017 Flat washer, 3/8 8 28 270-017 Lock nut, 3/8 UNC 11 29 250-032 Bolt, 3/8 x 2 UNC 5 30 C301-166 Wi
The laser cutter is a potentially dangerous machine. The most common safety risk while using the laser cutter comes from fire. The laser cutter can also produce dangerous fumes (e.g., chlorine), if used with improper materials. Operators must receive training prior to use of the laser cutter. The cutter must remain under constant supervision .
Length 6" Style SDS PLUS Useable Length 4" Cutter Geometry 2 Cutter Height 0.5" Width 0.5" Overview Milwaukee M/2 2 Cutter SDS Plus Rotary Hammer Drill bits are the Most Durable 2 Cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard .
Olfa Rotary Cutter 2 The blade end of the device is 5 cm wide and the opposite (handle) end of the device is 2.7 cm wide. It is approximately 1.5 cm in height (see Figure 3). A note about orientation: Figures 1 and 2 show the top of the device.Figure 3 shows the side and Figure 4 shows the bottom of the device. 2 Main Components of the Olfa Rotary Cutter
Traditionally, spiral bevel gear teeth are cut by a circular cutter. In general machining it may call a “fly cutter”. But the gear cutter has, not one, but may blades attached to a disc cutter head. The distance from the cutter to the axis of the tool rotation determines the curvature of the tooth line on the finished gear.
4. CUTTER WHEEL CONTROL: To start the cutter wheel, hold down the thumb button on the control handle. Then pull the trigger back. After the wheel is started, the thumb button can be released, but the trigger must be held to keep the cutter wheel turned on. To raise the cutter head, pull the cutter height control bar back.
Using the Techno Plasma Cutter About the Techno CNC Plasma Cutter The plasma cutter used in this book is a Techno CNC Plasma Cutter with a Hypertherm Powermax 45 torch and a moving gantry. This means that the part of the machine that holds the torch, the gantry, moves instead of the table. This saves space, and in many cases, increases speed and
Cutter Replacement Parts Item Number Description Part Number Kit Quantity 1 Kit Option Cutter ZM400 79841 1 1 Kit Option Cutter ZM600 79842 1 2 Kit Replacement Static Brush & Cutter Guard with the Angled End Sensor Flag (old design) ZM400. Order this replacement item if the printer currently has an Angled End cutter guard installed. 79864M 1 2
WORKING PRINCIPLE OF ROTARY EVAPORATOR Rotary Evaporator is essentially a thin film evaporator also called rotary vacuum evaporator. A rotary evaporator is a device used in Chemical Laboratories for efficient and gentle removal of solvents from samples by evaporation. The main components of a rotary evaporator are:
