Technical Data Hydraulic Lift Crane
Technical dataHydraulic lift craneComplies with ANSI B 30.5LR 1300
DimensionsBasic machine with undercarriage3234 22 9 9 10 63 7 5 LR130057.7 16 5 11 10 67 27 11 31 8 14 47.2 26 3 73.6 19.7 R3 26 3 R228 1 66 10 Operating weightRemarksThe operating weight includes the basic machine with crawlers, 2 mainwinches 33,100 lbs and 66 ft main boom, consisting of A-frame, boomfoot (33 ft), boom head (23 ft), boom extension (10 ft), 273,400 lbsbasic counterweight, 125,700 lbs carbody conterweight and 661,400lbs hook block.1. The lifting capacities stated are valid for lifting operation only(corresponding with crane classification according to F.E.M. 1.001.crane group A1).Total weight3. The weight of the lifting device (hoisting ropes, hook block, shackleetc.) must be deducted form the gross lifting capacity to obtain anet lifting value.approx. 639,400 lbs4. Additional equipment on boom (e.g. boom walkways, auxiliary jib)must be deducted to get the net lifting capacity.Ground pressureGround bearing pressure20.6 psiEquipmentMain boom (No. 2821.xx) max. length322 ftHigh reach boom (No. 2821.xx and 2316.xx)404 ftLuffing jib (No. 2316.xx) max. length371 ftMax. combinationmain boom 194 ft and luffing jib 371 ftAuxiliary jib79,400 lbs LR 13002. Crane standing on firm, horizontal ground.5. For max. wind speed please refer to lift chart in operator‘s cab ormanual.6. Working radii are measured from center of swing and under load.7. The lifting capacities are valid for 360 degrees of swing.8. Calculation of stability under load is based on 75% tipping load,ANSI B 30.5 and ISO 4305 Table 2.9. The structures are calculated according to F.E.M. 1.001 - 1998(EN 13001-1; EN 13001-2).
Transport dimensions and weightsBasic machine and boom (No. 2821.xx)Basic machine9 10 10 10 38.4 Option 56 11 40 with A-frame, 2x 33,100 lbs crane winches, without boom foot, hoistingropes, basic counterweight and crawlersWidth 9 10 Weight 92,160 lbsCrawler57.7 31 8 8 8 Flat track shoes 47.2 Width 55.1 Weight 49,300 lbsBoom foot(No. 2821.30)Width 9 9 Weight without winch 12,700 lbsWeight incl. winch and rope 16,350 lbs33 10 8 1 Boom section(No. 2821.24) 10 ftWidth 9 9 Weight* 2,650 lbs10 8 8 1 Boom section20 6 (No. 2821.24) 20 ftWidth 9 9 Weight* 4,200 lbs8 1 Boom section40 2 (No. 2821.24) 40 ftWidth 9 9 Weight* 7,390 lbs10 2 Boom head(No. 2821.24)Width 9 9 Weight* 11,900 lbs26 11 Boom - luffing jib transport option8 1 No. 2821.xx/2316.xx 40/40 20/20Length 41 20 6 Weight* 11,360 6,28530/30 ft10 8 3,990 lbs9 9 *)Including pendantsLR 1300
Transport dimensions and weightsLuffing jib (No. 2316.xx)Luffing jib head7 2 35 3 6 3 39 10 6 3 (No. 2316.20)Width 8 Weight* 5,070 lbsLuffing jib section40 ft(No. 2316.20) Width 8 Weight* 3,970 lbsLuffing jib section20 ft(No. 2316.20) Width 8 mmWeight* 2,100 lbs20 2 6 3 Luffing jib section10 ft(No. 2316.20) Width 8 Weight* 1,350 lbs10 4 6 7 45.3 L-boom jib section(No. 2316.20) 39.4inchWidth 8 Weight* 1,410 lbs10 10 Luffing jib foot with A-frames(No. 2316.22)Width 8 9 Weight* 17,450 lbs38 6 8 1 L-boom sect. tapered(No. 2821/2316.24) 40ftWidth 9 9 mmWeight* 5,950 lbs40 Fixed jib (No. 1713.xx)Fixed jib head7 1 25 5 39 10 4 11 20 2 4 11 6 3 31 4 Including pendantsLR 1300(No. 1713.18) 40 ftWidth 6 Weight* 2,520 lbsLuffing jib section(No. 1713.18) 20 ftWidth 6 Weight* 1,400 lbsLuffing jib section(No. 1713.18) 10 ftWidth 6 Weight* 930 lbs10 4 Width 6 Weight* 3,030 lbsLuffing jib section4 11 *)(No. 1713.21)Fixed jib foot with A-frame(No. 1713.22)Width 8 Weight* 5,070 lbs
Transport dimensions and weightsCounterweightsCounterweight 24.2 22 6 1xWidth 6 11 Weight 32,000 lbsCounterweight 7 6x15.6 Width 6 11 Weight 11,050 lbs26.8 Counterweight 8xWidth 6 11 Weight 22,050 lbs7 Carbody counterweight 18 2 13.8 4xWidth 5 Weight 31,420 lbsMid fall (optional)Mid fall section6 11 31.5 (No. 2316.25) 1.64 ftWidth 8 Weight 1,550 lbs8 6 Hooks661,400 lbs hook block – 11 sheaves32.3 8 2 Width 34.6 48.4 Weight 7,050 12,130 lbs330,700 lbs hook block – 5 sheaves32.3 7 3 32.3 6 6 32.3 Width 19.7 26 32.3 Weight 3,500 6,200 8,800 lbs220,500 lbs hook block – 3 sheavesWidth 13.4 19 24.4 Weight 2,400 4,500 6,600 lbs110,200 lbs hook block – 1 sheaveWidth 11 16.1 21.3 Weight 1,800 3,500 5,300 lbs6 1 35,300 lbs single hook3 7 19.7 Width 19.7 Weight 2,000 lbsLR 1300
Technical descriptionEngineMain winchesPower rating according to ISO 9249, 450 kW (603 hp) at 1900 rpmEngine typeLiebherr D 9508 A7Fuel tank238 gal capacity with continuous levelindicator and reserve warningEngine complies with NRMM exhaust certification EPA / CARB Tier 3and 97/68 EC Stage III.Hydraulic systemAn axial displacement pump supplies the open loop hydraulic systemfor boom luffing, jib luffing and travel. The main hoist winches andswing are operated in a closed loop system. All functions can beoperated simultaneously. To minimize peak pressure an automaticworking pressure cut–off has been installed. All filters are electronicallymonitored.The use of synthetic environmentally friendly (biodegradable) oils ispossible.Working pressuremax. 5076 psiOil tank capacity238 galLine pull (1st layer)max. 47,400 lbsLine pull (7th layer)33,100 lbsRope diameter28 mmDrum diameter28.7 inchRope speed0 – 453 ft/minRope capacity in 7 layers1,870 ftThe winches are outstanding in their compact design and easyassembly.Propulsion is via a planetary gearbox in an oil bath.Load support by the hydraulic system; additional safety factor providedby a spring loaded, multi–disc holding brake.The main winches use pressure controlled, variable flow hydraulicmotors.This system features sensors that automatically adjust oil flow toprovide max. winch speed depending on load.Option – winch with freefall system:Clutch and braking functions on the freefall system are provided by acompact designed, low wear and maintenance free multi–disc brake.CrawlersPropulsion through axial piston motor, hydraulically released springloaded multi–disc brake, crawler tracks, hydraulic chain tensioningdevice.Flat track shoes47.2 inchDrive speed0 – 0.8 mphLuffing jib winchLine pullRope diameterJib luffingmax. 23,150 lbs20 mm69 sec. from 15 to 78 Boom winchLine pullRope diameterBoom upmax. 48,000 lbs24 mm127 sec. from 15 to 86 SwingConsists of rollerbearing with external teeth, swing drive with fixedaxial piston hydraulic motor, spring loaded and hydraulically releasedmulti–disc holding brake, planetary gearbox and pinion.Both swing modes are possible – speed control or free swing.A multi–disc holding brake acts automatically at zero swing motion.Swing speed from 0 – 1.8 rpm continuously variable. LR 1300ControlThe control system – developed and manufactured by Liebherr – isdesigned to withstand extreme environmental conditions such astemperature, vibration and electromagnetic interference and to meet allrequirements that are needed in heavy duty crane operation.Completemachine operating data are shown on a high resolution display.Standard operational information is displayed by means of graphicalsymbols, fault indications are displayed in plain text (more than 15languages available).The cranes are equipped with proportional control for all mainmovements, which can be carried out simultaneously.The crane is operated with 2 multi–directional joysticks, the right forwinch I and boom, the left for winch II and swing control.Option:Bi–directional double T–levers for simultaneous boom and luffing jiboperation.The crawlers are activated by the two foot pedals. Additionally, handlevers can be attached to the pedals.Remote control for assembly of counterweight and boom hinge pins.Noise emissionNoise emissions correspond with 2000/14/EC directive on noiseemission by equipment used outdoors.
Boom combinations10 m (40 ft)No. 2316.2012 m (40 ft)No. 2316.2012 m (40 ft)No. 2316.2012 m (40 ft)No. 2316.2012 m (40 ft)No. 2316.2010 m (32.8 ft)No. 2316.201 m (39.4 inch)No. 2316.2212 m (40 ft)No. 2316.207 m (23 ft)No. 2821.2412 m (40 ft)No. 2316.206 m (20 ft)No. 2316.203 m (10 ft)No. 2316.2010 m (33 ft)No. 2316.2212 m (40 ft)No. 2821.246 m (20 ft)No. 2316.207 m (23 ft)No. 2821.2412 m (40 ft)No. 2821.24Tapered 12 m (40 ft)No. 2821/2316.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2316.207 m (23 ft)No. 2821.2412 m (40 ft)No. 2316.2012 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.246 m (20 ft)No. 2821.243 m (10 ft)No. 2821.2410 m (32.8 ft)No. 2821.30Main boom No.2821.xx6 m (20 ft)No. 1713.183 m (10 ft)No. 1713.187 m (23 ft)No. 1713.2212 m (40 ft)No. 2316.2012 m (40 ft)No. 2821.24Mid fall 0.5 m (1.6 ft)No. 2316.2012 m (40 ft)No. 1713.1812 m (40 ft)No. 2316.2012 m (40 ft)No. 2821.2412 m (40 ft)No. 2316.207 m (23 ft)No. 1713.21322 ft12 m (40 ft)No. 2821.2412 m (40 ft)No. 2821.2410 m (32.8 ft)No. 2821.3010 m (32.8 ft)No. 2821.30Max. combination404 ftMain boomNo.2321.xx151 ftTapered No.2321/2316.xxLuffing jib No.2316.xx40 ft213 ftMax. combinationMain boom No. 2821.xxFixed jibNo. 1713.xx6 m (20 ft)No. 2821.2410 m (32.8 ft)No. 2821.30368 ft253 ft115 ftMax. combinationMain boom No. 2821.xxLuffing jib No. 2316.xxMain boomLuffung jibNo. 2821.xxNo. 2316.xx565 ft194 ft371 ft203 ft322 ftLR 1300
Self assembly systemUnloading of basic machineUnloading and assembly of crawlersUnloading and assembly of carbody counterweightUnloading and assembly of counterweightUnloading and assembly of boom foot LR 1300Unloading and assembly of boom
Erecting of main boom to working positionAssembly of boomReeving of hoist and luffing jib ropesErecting of main boom and luffing jibWorking positionLR 1300
Main boom86 – 15 (No. 2821.xx)273,400 lbs counterweight and 125,700 lbs carbody counterweightft320300m10026092 608480 50180686056140 30484440100363220 12080602415 28201640206 7”tf92252160t2f307264200t2f3140 220t2f3276240Auxiliary jib 79,400 lbs70 968828086 80 t4f18t4f17t4f16t4f15t4f14t4f13t5f12t5f11t5f10 tf95 tf85 tf76 tf66The maximum capacityof the auxiliary jib is79,400 lbs.The corresponding loadchart is programmed inthe LMI system.1284008884802807626072240686422060200Main boom 166012400m480 ft20(Table 1 – No. 2821.xx)Configuration for boom lengths between 66 ft and 322 ftLength*Boom foot11Boom insert10 ftBoom insert20 ftBoom insert40 ftBoom head23 ftBoom length (ft)Amount of boom extensions32.8 1111111166768595 105 115 125 134 144 154 164 174 184 194 203 213 223 233 243 253 262 272 282 292 302 312 322111111111111111111111111111111111LR 130011111*Actual lengths of boom sectors are metric (e.g. 3m, 6m, 7m, 12 m). The figures shown above are approximate conversions to feet.101111111111
Lift chart for main boom(No. 2821.xx)229,300 lbs counterweight and 125,700 lbs carbody 3,9137,8113,395,571,255,346,6Boom length in ,9197,3152,5136,4111,994,069,653,845,236,329,5Lift chart for main 0200220235255275280295(No. 2821.xx)273,400 lbs counterweight and 125,700 lbs carbody 9,281,964,254,4Boom length in (ft)164184203lbslbslbs419,7446,9419,7 363,6382,5 368,6 344,3328,2 323,8319,1290,8 283,7 278,6257,5 254,8 247,7224,0 223,5 222,8173,9 173,3 172,5155,9 155,2 154,4128,4 127,7 126,8108,3 107,6 5310LR 130011
L - boom high reach236 ft – 404 ft(No. 2821/2316.xx)Working range 86 – 15 t4f40ft439 ft48t34f37 4 ftt364f t35f4t345f33 5 ft2t35f31 ft50t35f25 ft5t286f t276f62L – boom configuration with 151 ft main boom(No. 2821/2316.xx)Configuration for L – boom lengths (236 ft – 404 ft)Length*Amount of boom extensions32.8 ft111111111111111111Boom insert40 ft333333333333333333Tapered40 ft111111111111111111Luffing insert10 ft1Boom footLuffing insert20 ftLuffing insert40 ftLuffing insertLuffing jib head1111111111111111112222333344413.2 276285295305315325335344354364374384394404*Actual lengths of boom sectors are metric (e.g. 3m, 6m, 7m, 12 m). The figures shown above are approximate conversions to feet.LR 1300132.8 mMax. L – boom length (ft)121
Working range – luffing jib (No. 2316.xx) 78 – 15 Main boom 88 – 45 ft1 t37 61 fft3 ft 41 ft3 1 ft1353 2 t332 2 f t31 2 f t30 2 f t29 2 f t28 2 f ft27 62 ft2 3 t25 3 f t24 3 f t23 3 f t22 3 f ft21 03 ft2 4 t19 4 f t18 4 f t17 4 f t16 4 f ft15 44 ft1 4 t13 5 f t12 5 f t11 5 f10 ft95 ft85 ft76 ft66ft321 2 ft02 4 ft19 4 ft18 4 ft17 4 ft16 4 ft15 4 ft14 4 ft13 5 ft12 5 ft11 5 ft10 5 ft9 ft85 ft76 ft66Boom configuration for main boom lengths (66 ft – 213 ft) – see table 1 on page 10Jib configuration for jib lengths (66 ft – 371 ft)Length*Luffing jib foot32.8 ftLuffing jib insert10 ftLuffing jib insert20 ftLuffing jib insertLuffing jib headAmount of luffing jib extensions111111111140 ft32.8 ftLuffing jib length 11111111111111111166 76 85 95 105 115 125 134 144 154 164 174 184 194 203 213 223 233 243 253 262 272 282 292 302 312 322 331 341 351 361 371*Actual lengths of boom sectors are metric (e.g. 3m, 6m, 7m, 12 m). The figures shown above are approximate conversions to feet.LR 130013
Lift chart – luffing jib (No. 2316.xx)Main boom angle 88 Main boom 66 2066lbs115,7103,594,733,4Main boom 105 ftJib length in (ft)105164203243282lbslbslbslbslbs165,4142,3 141,6123,5 121,3 110,0109,4 107,5 107,499,2 95,3 94,6 86,790,5 86,5 85,7 85,083,3 78,7 77,2 76,9 61,377,5 71,8 70,3 69,8 60,857,9 54,2 51,6 50,4 48,951,4 48,3 45,4 43,6 42,128,6 26,5 24,2 22,219,9 17,9 15,613,311,412,7 s26,324,916,29,42,4Main boom 134 920,518,416,614,97,22,1Main boom 194 0,6101,493,875,3164lbsJib length in (ft)203243282lbslbslbs151,6144,5 109,7137,8 108,3126,5 104,1112,7 99,1102,5 92,696,4 89,085,9 83,240,2 ib length in 4Main boom 213 ftJib length in ,677,766,443,066lbsMain boom 164 ftJib length in ,960,750,942,1Jib length in es in metric tons with luffing jib (No. 2316.xx) 273,400 lbs counterweight 125,700 lbs carbody counterweight. Above lift chart is forreference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.14LR 1300
Lift chart – luffing jib (No. 2316.xx)Main boom angle 83 Main boom 66 29032566105164lbslbslbs257,9188,8 179,6110,9 104,7 105,8101,4 93,9 93,785,2 84,973,070,159,9 56,052,9 48,941,737,730,0Main boom 105 ftJib length in ,63,0371lbs23,022,418,211,76,62,92,5Main boom 134 314,96,82,7Main boom 194 0532534066105lbslbs184,0156,1 144,8115,5 114,3100,7 33566105164lbslbslbs201,0163,1 159,2126,1 124,9 116,4109,0 108,2 105,789,7 87,480,3 78,172,5 70,533,467,161,242,9Jib length in 62,6Main boom 213 ftJib length in ,650,940,6Jib length in (ft)66105164203243282lbslbslbslbslbslbs258,0206,3 199,6139,3 138,4 136,1115,2 118,6 116,4 106,1103,6 101,5 10
LR 1300 3 Transport dimensions and weights Basic machine and boom (No. 2821.xx) Basic machine with A-frame, x 33,100 lbs crane winches, without boom foot, hoisting ropes, basic counterweight and crawlers Width 9 10 Weight 9 ,160 lbs Crawler Flat track shoes 47.
Jan 03, 2018 · flying squirrel moose cut moose bobcat glades runner up porcupine run deer round-a-bout cub carpet low road bobcat chute bus lot lot 3 lot 2 lot 1 lot 4 lot 5 lift e / face lift lift a / mixing bowl lift e / face lift lift b / bear lift lift k / cloudsplitter gondola lift h / mountain run lift i / freeway lift lift g / little whiteface lift g .
The hydraulic floor crane consists of truck, hydraulic cylinder, hydraulic tank, hydraulic hoses, DCV, beam and hooks. This portable crane uses a hydraulic system to lift a heavy loads applying only small force. In this project we designed and produced a portable crane which can lift a heavy load with a maximum capacity of 3 ton.
The hydraulic floor crane consists of truck, hydraulic cylinder, hydraulic tank, hydraulic hoses, DCV, beam and hooks. This portable crane uses a hydraulic system to lift a heavy loads applying only small force. In this project we designed and produced a portable crane which can lift a heavy load with a maximum capacity of 3 ton.
Double Girder Overhead Traveling Crane Double Beam EOT Crane P r o d u c t s & S e r v i c e s. MATERIAL HANDLING CRANES Material Lifting Crane Heavy Duty Crane Electric Overhead Travel Crane Single Beam Crane P r o d u c t s & S e r v i c e s. GANTRY CRANE Portable Gantry Crane Heavy Duty Gantry Crane Semi
The plan is available in both Lite and Standard versions. The Lift Plan Details panel identifies the parties involved in the lift and confirm: - the date and time of the lift - the location of the lift - a description of the lift Lift Plan Details The Hazard Checks panel lists common hazards associated to crane operation and load lifting. The
HYDRAULIC BOTTLE JACKS 1 HYDRAULIC BOTTLE JACKS K12150 - 1850kg Hydraulic Bottle Jack K12151 - 4000kg Hydraulic Bottle Jack K12152 - 6000kg Hydraulic Bottle Jack K12153 - 10000kg Hydraulic Bottle Jack K12157 - 20000kg Hydraulic Bottle Jack K12158 - 10000kg Hydraulic Bottle Jack K12159 - 20000kg Hydraulic Bottle Jack ED1 / JUNE 19 Distributed by Kincrome Tools and Equipment www.kincrome.com.au
To lift the crane, use the ram handle (19) to lock the ram valve, then put the handle into the fulcrum and lift the ram. To lower the crane, use the ram handle (19) to release the ram valve. After Each Use WARNING Keep the crane away from children. This crane stores easily in the side of the truck. Maintenance
or beam. Generally, cranes can be classified as; jib crane, overhead bridge crane, telescopic handler's crane, and the travelling gantry crane. A hydraulic system is used for transmitting force or motion by applying pressure on a confined liquid. Hydraulic cranes are usually multi -degree of freedom (multi-DOF) mechanical booms. Their main
