Rockwell HR Series - Kerley Corporation
Test EquipmentRockwell Hardness Testing MachinesHR-200/300/400/500 SeriesBulletin No. 2025
Four economical Rockwell Hardness Testing Machines toHR-210MR Order No. 963-220-10ARockwell Hardness Testing MachineMotorized application of the total (Major)test force improves accuracy and repeatabilityand eliminates the problems of an oil dashpotcontrolled system.HR-320MS Order No. 963-231-10ATwin type (Rockwell/RockwellSuperficial) Hardness Testing MachineManually handles test force and preliminarytest force selection. Motor drive controlsloading sequence.FeaturesThe newly designed frame provides maximum clearance for positioning the workpiece.A flat table is all that is needed for mounting these testing machines.Simple to operateThe Dial Model HR-210 features an automatic presetfunction on the indicator to set the initial (Minor) testforce to zero.1
o suit practically every application.HR-430MR Order No. 963-240-10AHR-430MS Order No. 963-241-10ARockwell Hardness Testing MachineTwin type (Rockwell/Rockwell Superficialcombined use) Hardness Test equipment Economy type tester loaded with the features of a more expensive tester such as an Automatic Brake and Startsystem that stops the application of the initial (Minor) test force and starts the total (Major) test force cycle. Adjustable Dwell time. Dial Selection of total test force. MS model also feature easy dial change between Rockwell and Superficial Scales.The digital type (HR-320MS, HR-430MR and HR-430MS) has adigimatic output and our Digimatic Mini-Processor (DP-1VR) toprint and input tools (USB-ITN-E) to connect to a PC and use fordata transfer. The digital type (HR-430MR andHR-430MS), with the adoption of theautomatic elevating screw brake & theautomatic load sequence, with onlysimple handling test possibility.Light Force Brinell hardness tests can be performed by using theavailable optional accessories: a Brinell indenter, a weight set anda measurement microscope.2
SpecificationsInch (mm)Order NumberModelTest ScalesStandardPreliminary Test ForceTest Force Rockwell963-220-10AHR-210MRRockwellTest Force SuperficialDisplayHardness Minimum ValueScale ConversionsPreliminary Test ForceTotal Test Force ControlLoading MethodLoad Duration (Dwell)Maximum Specimen Ht.Maximum DepthData OutputPower SupplyDimensions (D x W x 430MRHR-430MSRockwell and Rockwell SuperficialRockwellRockwell and Rockwell SuperficialJIS B 7726 ISO 6508-2 ASTM E18-1098.07N (10kgf)98.07N (10kgf), 29.42 (3kgf)98.07N (10kgf), 29.42 (3kgf)98.07N (10kgf), 29.42 (3kgf)588.4N (60kgf), 980.7N (100kgf), 1471N (150kgf)147.1N (15kgf), 294.2N (30kgf),147.1N (15kgf), 294.2N (30kgf),——441.3N (45kgf)441.3N (45kgf)DialMatrix Backlight LCD0.5 HR0.1 HR—HRC, HRB, HV, HBW, HS, Mpa plus offset, OK/NGManual (with automatic zero set)Manual (with Loading Navigator)Manual (with automatic brake-start)Automatic (loading, duration, unloading)Dead WeightFixed (3s to 5.5s) or ManualAdjustable (1s to 99s) or Manual7.1” (180mm)6.5” (165mm)—RS-232C, SPC120V AC ( 10%), 60Hz20.15”(512mm) x 9.25”(235mm) x20.6”(523mm) x 9.25”(235mm) x20.6”(523mm) x 9.25”(235mm) x20.6”(523mm) x 9.25”(235mm) (780mm)100.53lb (45.6kg)102.07lb (46.3kg)108.69lb (49.3kg)110.01lb (49.9kg)STANDARD ACCESSORIESAll ModelsItemV Anvil (large)Flat Anvil1/16" Carbide Ball IndenterAC AdapterUsers ManualVinyl CoverAccessory BoxLevelMR ModelsDescription30mm64mmMS ModelsItemDescriptionItemDescriptionDiamond IndenterHardness test BlockHardness test BlockHardness test BlockRockwellDiamond IndenterHardness test BlockHardness test BlockHardness test BlockHardness test BlockHardness test BlockRockwell and Superficial60 HRC30 HRC90 HRBW65 HR30N70 HR30TW60 HRC30 HRC90 HRBWROCKWELL HARDNESS SCALESScaleIndenterPreliminarytest forceConical kgf)Total test force588.4N (60kgf)980.7N (100kgf)1471N (150kgf)588.4N (60kgf)980.7N (100kgf)1471N (150kgf)588.4N (60kgf)980.7N (100kgf)1471N (150kgf)588.4N (60kgf)980.7N (100kgf)1471N (150kgf)588.4N (60kgf)980.7N (100kgf)1471N (150kgf)Hardness -100HRB30-94HRG80-100HRH70-100HRE40-100HRKScale Hardness symbol*1Rockwell Superficial hardnessRockwell YHR45YIndenterPreliminarytest forceConical gf)CoverageTotal test force147.1N (15kgf)294.2N (30kgf)441.3N (45kgf)147.1N (15kgf)294.2N (30kgf)441.3N (45kgf)147.1N (15kgf)294.2N (30kgf)441.3N (45kgf)147.1N (15kgf)294.2N (30kgf)441.3N (45kgf)147.1N (15kgf)294.2N (30kgf)441.3N (45kgf)Hardness range 29-82HR30T10-72HR45T*1: In the case of scales which specify a spherical indenter, a letter should be appended to the hardness symbol (“S” for steel, “W” for tungsten carbide) when quoting the measurement result to show that it was obtained with anindenter made of the indicated material.*2: Applied to a specimen of less than 0.6mm thickness a special test, which takes account of the influence of the impression made by the test sphere on such a thin specimen, may be designated as HR30Tm and is defined in JIS Z2245 appendix A.3
Advanced Rockwell Type Hardness Testing MachinesHR-521/523Advanced Rockwell Hardness Testing MachinesFeaturesMultiple test force generation for Rockwell, Rockwell Superficial and optional Brinell hardness.Projected-nose indenter arm for easy reach of interior (min. ø1.6"(40mm)/ø.86"(22mm)*) and exterior surfaces.*When using an optional diamond indenter (19BAA292).Closed Loop electronic test force control for accurate loading.Auto-stop elevation table and automatic preliminary test force loading provide consistent test force ficationsOrder NumberModelTest ScalesStandardPreliminary Test ForceTest Force RockwellTest Force SuperficialInch HR-523Rockwell and Rockwell SuperficialJIS B 7726 ISO 6508-2 ASTM E18-1098.07N (10kgf), 29.42 (3kgf)588.4N (60kgf), 980.7N (100kgf), 1471N (150kgf)147.1N (15kgf), 294.2N (30kgf), 441.3N (45kgf)810-207-03AHR-523LTouch Screen LCD Showing: Hardness value, Converted hardness value, Test conditions, OK/NG tolerance judgement, statistical processing result.Cylindrical/spherical surface compensation, data offset, Hardness conversion (HV, HK, HRA/B/C/D/F/G/15T/30T/45T/15N/30N/45N, HS, HB,HBW, tensile strength),OK/ NG tolerance judgement, measured data editing, data memory (max 1024 data), SPC calculation (No. of data, max/min/mean values, range, upper/lower limit values,standard deviation, No. of passing/defective) Histogram, x-R chart.Hardness Minimum ValueScale ConversionsPreliminary Test ForceTotal Test Force Load ControlLoading MethodLoad Duration (Dwell)Maximum Specimen HeightMaximum DepthData OutputPower SupplyDimensions (D x W x H)Mass0.1 HRAdvanced with correctionsManual (with automatic brake-start)8.1" (205mm)26.4" (670mm) x 9.8" (250mm)x 23.8" (605mm)132.28lb (60kg)Fully Motorized Power Elevating ScrewAutomatic (loading, duration, unloading)Closed Loop Electronic ForceAdjustable (0s to 120s) or manual15.5” (395mm)8.1” (205mm)15.5” (395mm)5.9" (150mm)RS-232C, SPC and Centronics120V AC ( 10%), 60Hz26.4” (670mm) x 9.8” (250mm)26.4” (670mm) x 9.8” (250mm)26.4” (670mm) x 9.8” (250mm)x 29.5” (750mm)x 23.8” (605mm)x 29.5” (750mm)154.32lb (70kg)132.28lb (60kg)154.32lb (70kg)4
Optional Accessories for Rockwell/Rockwell Superficial T810-027-7810-038-7Round table ø9.85"(250mm)VARI-RESTFor large specimensFor testing long specimens using anvil810-037-7810-029Round table ø7.09"(180mm)Special V anvilFor large specimensLength 16"(400mm), groove width2"(50mm) Supports the standardhardenability testfor steelFor cylindrical specimens810-040-7V anvil (large)ø1.6"(40mm), groove width 1.18"(30mm)For large specimens810-043Spot anvilFine adjustment table for Jominy testFine adjustmenttable for Jominy testLength 16"(400mm)groove width 2"(50mm)For cylindrical specimensOrder No.Order No.ø.47"(12mm)For sheet specimens64BAA24164BAA242810-041-7C Scale SetB Scale SetV anvil (small)Test BlocksTest Blocksø1.6"(40mm), groove width 6mmFor cylindrical Spot anvilSmall V anvil64BAA15864BAA135ø.22"(5.5mm)For sheet specimensø.39"(10mm)For cylindrical specimensIndenterIndenter64BAA07264BAA078Order No.Order No.64BAA24364BAA24430N ScaleSet30T ScaleSetTest BlocksTest BAA16764BAA130Digimatic mini-processor DP-1VRIndenterIndenter64BAA07364BAA078* No connection cable supplied.(Should be ordered separately)Connection cable (1m) 937387810-030-7Diamond spot anvil.39"(10mm)For sheet specimens810-042-7810-028-7810-048Jack restConsole tableFor testing long specimensusing table or anvil16”500)8”(311.0)(40Unit: Inch (mm)27.6”(700)21.8”(554)Calibration Set810-02606ADV380EUSB Direct Input ToolThe USB plug is connected to acomputer
Type Hardness Testing MachinesTest Blocks*Order No.Hardness64BAA159HRA81/86 Rockwell Test Block64BAA160HRA75/79 Rockwell Test Block64BAA161HRA70/73 Rockwell Test Block64BAA162HRA65/68 Rockwell Test Block64BAA163HRA60/62 Rockwell Test Block64BAA249HRBW95/100 Rockwell Test Block64BAA126HRBW90/95 Rockwell Test Block64BAA131HRBW80/85 Rockwell Test Block64BAA132HRBW70/75 Rockwell Test Block64BAA133HRBW60/65 Rockwell Test Block64BAA134HRBW50/55 Rockwell Test Block64BAA135HRBW40/45 Rockwell Test Block64BAA127HRBW30/35 Rockwell Test Block64BAA136HRBW20/25 Rockwell Test Block64BAA137HRBW10/15 Rockwell Test Block64BAA138HRBW0/5 Rockwell Test /65 Rockwell Test BlockHRC50/55 Rockwell Test BlockHRC40/45 Rockwell Test BlockHRC30/35 Rockwell Test BlockHRC20/25 Rockwell Test BlockOrder 9 Rockwell Test BlockHR30T70/73 Rockwell Test BlockHR30T63/67 Rockwell Test BlockHR30T56/60 Rockwell Test BlockHR30T49/53 Rockwell Test BlockHR30T43/47 Rockwell Test BlockHR30T36/39 Rockwell Test BlockHR30T29/33 Rockwell Test BlockHR30T22/26 Rockwell Test BlockHR30T15/18 Rockwell Test 15264BAA15364BAA15464BAA15564BAA156HR15T90/92 Rockwell Test BlockHR15T86/69 Rockwell Test BlockHR15T83/85 Rockwell Test BlockHR15T80/82 Rockwell Test BlockHR15T77/79 Rockwell Test BlockHR15T72/74 Rockwell Test BlockHR15T70/72 Rockwell Test BlockHR15T68/69 Rockwell Test BlockHR15T64/66 Rockwell Test BlockHR15T61/63 Rockwell Test BlockRockwell Type Diamond IndentersOrder sHR45N65/70 Rockwell Test BlockHR45N55/60 Rockwell Test BlockHR45N45/50 Rockwell Test BlockHR45N35/40 Rockwell Test BlockHR45N25/30 Rockwell Test 77/82 Rockwell Test BlockHR30N68/73 Rockwell Test BlockHR30N59/64 Rockwell Test BlockHR30N50/55 Rockwell Test BlockHR30N40/45 Rockwell Test 90/93 Rockwell Test BlockHR15N85/88 Rockwell Test BlockHR15N80/83 Rockwell Test BlockHR15N75/77 Rockwell Test BlockHR15N69/72 Rockwell Test Block1/4"7/16"15/32"3/8"Order tionHRE 50/55 Rockwell Test BlockHRE 60/65 Rockwell Test BlockHRE 70/75 Rockwell Test BlockHRE 80/85 Rockwell Test BlockHRE 90/95 Rockwell Test BlockCarbide Ball IndentersOrder 819BAA50919BAA510Description1/16” Carbide ball indenter1/8” Carbide ball indenter1/4” Carbide ball indenter1/2” Carbide ball indenter1/16” Carbide ball (1pc.)1/8” Carbide ball (1pc.)1/4” Carbide ball (1pc.)1/2” Carbide ball (1pc.)* Please inquire for other hardness ranges6Order No.Scale64BAA072C64BAA073N64BAA086A64BAA071C &N
Conveniently located throughout the US and Canada, Mitutoyo AmericaCorporation’s state-of-the-art calibration facilities are staffed by NIST-trainedcalibration engineers to provide calibration/re-calibration of Mitutoyo and othermanufacturers gage blocks and gages. Your tools will be quickly returned alongwith an NIST-traceable accuracy certificate. Call today for more informationabout our A2LA, ISO 9002 and ISO 17025 accredited labs or to request acalibration price list.A real-time display of measurement results andstatistical analysis on the shop floor, with datasaved in a database. Includes SPC and statisticalanalysis, data filtering and reporting systems forcomplete control of your manufacturing processes.MeasurLink includes modules for shop floor datacollection, QC room data analysis and reporting,gage R&R studies, and gage tracking.Distributed by:One Number to Serve You Better1-888-MITUTOYO (1-888-648-8869)Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance datacontained in this printed matter as well as other technical data are to be regarded as approximate average values. We thereforereserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptionsand illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General TradingConditions will apply. Only quotations submitted by ourselves may be regarded as definitive.Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may requireprior approval by an appropriate governing authority.Trademarks and RegistrationsDesignations used by companies to distinguish their products are often claimed as trademarks. In all instances where MitutoyoAmerica Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companiesshould be contacted for more complete trademark and registration information. 2011 Mitutoyo America Corporation, Aurora IL0111-17 Printed in USA, May 2011Aurora, Illinois(Corporate Headquarters)Westford, MassachusettsHuntersville, North CarolinaMason, OhioPlymouth, MichiganCity of Industry, California
Optional Accessories for Rockwell/Rockwell Superficial Type Hardness Testing Machines Order No. Scale 64BAA072 C 64BAA073 N 64BAA086 A 64BAA071 C & N 3/8" 15/32" 7/16" 1/4" Rockwell Type Diamond Indenters Order No. Hardness 64BAA159 HRA81/86 Rockwell Test Block 64BAA160 HRA75/79 Rockwell Test Block
Rockwell Hardness Testing Machine. HR-530 Series. Unique electronic control makes the HR-530 series of hardness testers . capable of Rockwell, Rockwell Superficial, Rockwell testing of plastics (A & B) and Light Force Brinell hardness testing. HR-530 (810-237) Maximum specimen size: Height 250 mm, Depth 150 mm. HR-530L (810-337) Maximum .
HR Series Portable Rockwell/Superficial Rockwell Hardness Tester . HBR Series Brinell & Rockwell Hardness Tester . Caution： 1. Safety goggles must be worn to prevent possible injury. 2. Gloves and the handing handle must be used during the hammer impact test. Attention： Check and confirm to bring the thin screw about 10-20mm up above the .
Department of Criminology and Criminal Justice 817-272-0478 (direct office) 362 University Hall, Box 19595 817-272-5673 (fax) Arlington, TX 76019 kent.kerley@uta.edu EMPLOYMENT 2015-present University of Texas at Arlington Departme
1. ROCKWELL HARDNESS TEST 1. AIM: To determine the Rockwell Hardness of a given test specimen II. APPARATUS: Rockwell Hardness testing machine, Test specimen. III. THEORY: HARDNESS- It is defined as the resistance of a metal to plastic deformation against Indentation, scratching, abrasion of cutting. The hardness of a material by this Rockwell .File Size: 860KB
1. ROCKWELL HARDNESS TESTS Aim: To determine the Rockwell hardness number on B and C scales for a given metallic specimen. Test Setup: Rockwell Hardness Testing Machine. Indenters: i) For Rockwell – B Test: Steel ball indenter of diameter (1/16)th inch. ii) For Rockwell – C Test: Ro
SMB_Dual Port, SMB_Cable assembly, Waterproof Cap RF Connector 1.6/5.6 Series,1.0/2.3 Series, 7/16 Series SMA Series, SMB Series, SMC Series, BT43 Series FME Series, MCX Series, MMCX Series, N Series TNC Series, UHF Series, MINI UHF Series SSMB Series, F Series, SMP Series, Reverse Polarity
Aleut Corporation Arctic Slope Regional Corporation Bering Straits Native Corporation Bristol Bay Native Corporation Calista Corporation Chugach Alaska Corporation Cook Inlet Regional Inc. Doyon, Limited Koniag, Inc. NANA Regional Corporation Sealaska Corporation 13th Regional Corporation Arctic
Description Logic: A Formal Foundation for Ontology Languages and Tools Ian Horrocks Information Systems Group Oxford University Computing Laboratory Part 1: Languages . Contents Motivation Brief review of (first order) logic Description Logics as fragments of FOL Description Logic syntax and semantics Brief review of relevant complexity .
