HARVARD FACULTY ARTS SCIENCES LEED CI V2.0 SCHREIBER L .

3y ago
40 Views
2 Downloads
994.70 KB
6 Pages
Last View : 24d ago
Last Download : 3m ago
Upload by : Ryan Jay
Transcription

HARVARD FACULTY OF ARTS AND SCIENCESLEED‐CI V2.0SCHREIBER LAB RENOVATIONGOLDNAITO BUILDING, 12 OXFORD ST , CAMBRIDGE, MA 02138Certified LEED-CI Gold in November, 2009, Schreiber Lab is a 1,700 square foot Chemistry Lab, located on the1st floor of the Naito Laboratory Building at 12 Oxford Street in Cambridge, MA. The Naito Laboratory building, a fourstory structure constructed in 2000, is one of the four buildings housing all 278,000 sq. ft of laboratories for Harvard’sDepartment of Chemistry and Chemical Biology, located within the Cabot Science Complex.The Schreiber project, completed in thesummer of 2008, is a renovation of an existinglab space, previously occupied by a differentprofessor. In order to support the researchactivities of Professor Schreiber and his labgroup, the space was renovated toaccommodate four fume hoods, island andwall benches, write-up desks, chemicalstorage cabinets, a solvent purificationsystem, and mechanical and electrical tie-ins.Two adjacent offices and an instrument roomwere also renovated as part of the project.Sustainability was a focus throughout theproject —with Harvard’s Green BuildingGuidelines and the LEED-CI rating systemguiding the selection of materials and themechanical, electrical and plumbing (MEP)systems for the project.Schreiber LabPhoto: Ellenzweig. 2009PROJECT HIGHLIGHTSLEED Facts79.6%of on-site generated construction waste was diverted from landfills.100%of the equipment and appliances are EnergyStar rated100%of the Lab occupants have task lights to allowindividual control of their lighting to suit individualpreferences and needsSchreiber LabHarvard Faculty of Arts and Sciences2008 RenovationLocation Cambridge, MassachusettsRating System .Commercial Interiors v2.0Certification Achieved GoldTotal Points Achieved 34 / 57Sustainable Sites .4/7Water Efficiency . .2/2Energy and Atmosphere . .5/12Materials and Resources . . .3/14Indoor Environmental Quality .15/17Innovation and Design 5/5Please print this project profile only if necessary.If printing is required, please print double sided and recycle when finished. Thank you!

HARVARD FACULTY OF ARTS AND SCIENCES ‐ SCHREIBER LABDEPARTMENT OF CHEMISTRY AND CHEMICAL BIOLOGYPROJECT OVERVIEWSCHREIBER LAB FLOOR PLAN & LEED BOUNDARYLABINSTRUMENTADMIN OFFICEPROF. SCHREIBER’SSchreiber LabPhoto: Ellenzweig. 2009PROJECT TEAMOwnerHarvard Faculty of Arts and SciencesProjectManagerHarvard University Department of Chemistryand Chemical BiologyArchitectEllenzweigContractorJBM General ContractorsHVACEngineerBR A Consulting Engineers, LLCCommissioningAuthorityBR A Consulting Engineers, LLCSustainabilityConsultantHarvard University, Office for SustainabilityGreen Building ServicesSchreiber LabPhoto: Ellenzweig. 20092Please print this project profile only if necessary.If printing is required, please print double sided and recycle when finished. Thank you!

HARVARD FACULTY OF ARTS AND SCIENCES ‐ SCHREIBER LABDEPARTMENT OF CHEMISTRY AND CHEMICAL BIOLOGYSITETo encourage alternatives to driving, all occupants of the NaitoLaboratory building have access to Harvard’s comprehensiveCommuterChoice Program, which provides incentives and discountsfor all modes of alternative transportation as well as carpooling andfuel efficient vehicles.The building is located within walking distance to the Harvard SquareMBTA stop, several bus lines, and the Harvard University Shuttle.Three bicycle racks with a total capacity of 90 bicycles are locatedapproximately 80 feet from the rear entrance of the Naito Laboratorybuilding for use by the building’s occupants. Showers and changingfacilities are located on the first floor.Naito Laboratory Building12 Oxford Street, Cambridge, MAThe building is located in a dense urban area, which allows occupantsto walk and easily access amenities such as restaurants, banks,churches, and retail stores.Naito LaboratoryBuildingMBTA Bus StopsHarvard UniversityShuttle Bus StopsMBTA Subway StationBike Racks at the Naito BuildingPhoto: Jessica Eisenman Parks.Harvard Office for Sustainability. 2009WATER EFFICIENCYPer LEED requirements, if a project boundary does not includebathrooms, calculations must be for the fixtures in the closestbathroom. The closest bathrooms to Schreiber Lab have waterefficient fixtures, which reduce domestic water consumptionby 35% over standard EPAct 1992 fixtures. This is theequivalent of saving over 80,000 gallons per year.FIXTURES IN SCHREIBER PROJECT SCOPESLOAN UPPERCUT Dual-Flush Flushometer(Up 1.1 gpf and Down 1.6 gpf)Differences in the Flush & Flow Rates for EPAct 1992 Standard Fixturesand the fixtures installed for the Schreiber Lab ProjectSchreiber LabFlush & Flow RatesEPAct 1992 StandardFlush & Flow RatesDual-Flush1.6 & 1.11.6Urinal [GPF]1.01.0Bathroom Sink [GPM]0.52.5Shower [GPM]1.52.5Kitchen Sink1.52.5Fixture TypeWater Closet [GPF]GPF - Gallons Per Flush3Grohe Watercare Relexa Non-Adjustable Showerhead(1.5 gpm)GPM - Gallons Per MinutePlease print this project profile only if necessary.If printing is required, please print double sided and recycle when finished. Thank you!

HARVARD FACULTY OF ARTS AND SCIENCES ‐ SCHREIBER LABDEPARTMENT OF CHEMISTRY AND CHEMICAL BIOLOGYENERGY EFFICIENCYThe Faculty of Arts and Sciences (FAS) has committed, along with Harvard University as a whole, to reduce greenhousegas emissions 30% below 2006 levels by 2016, inclusive of growth. Therefore energy efficiency was a main goal of thisrenovation project.MECHANICAL SYSTEMSELECTRICAL SYSTEMSAn existing 100% outside air, variable volume air handling unit(AHU) provides fresh air to new variable volume terminal boxesand fan coil units (FCUs) in each of the four renovated spaces,allowing each space to be controlled independently.Plug Loads: Energy Star equipment was selected forall equipment in the space, which includes computersand printers.Occupancy and Temperature Sensors: For each roomwithin the project boundary, occupancy sensors tied to thebuilding’s control system modulate the supply air and maintaintemperature set-points allowing both to be set back wheneverspaces are unoccupied. The type of space and the activitiescarried out within it dictate the appropriate occupied andunoccupied set-points for temperature and ventilation.Light Fixtures:Energy-efficient and low-mercuryfluorescent lighting fixtures and lamps were carefullychosen and strategically located within each space toreduce electricity consumption while maintainingadequate lighting levels for each type of space.High Performance Fume Hoods installed as part of theproject include Variable Air Volume (VAV) fume hoods, whichrun at face velocity of 80 feet per minute instead of 100 feet perminute, thus reducing air flow by 20% and conserving theenergy that would have been required to condition the air.Lighting controls: Each space has overhead lightingcontrolled by multiple switches/zones and each deskhas either under-counter task lights or desk lamps formultiple lighting levels based on different needs. Theproject’s lighting design allows 91% of the occupants toadjust the lighting to suit their individual preferences,which not only increases occupant productivity andcomfort, but also decreases energy use.Real-time displays: Hood exhaust rates are displayed in realtime, reminding occupants to keep hood sashes closed whennot in use. "Shut the Sash”: A competition between labsaimed at reducing the extreme energy consumption due toopen fume hoods.Light Sensors The two offices and the area above thestudent workstations have occupancy and daylightsensors that turn ceiling fixtures on and off based onthe presence of people and the levels of natural light,respectively.Commissioning: The mechanical and electrical systems havebeen fully commissioned by a third-party CommissioningAuthority, which ensured that all energy-related systems wereinstalled as designed, and operating efficiently prior tooccupancy.Renewable Energy: Renewable Energy Certificates (RECs)have been purchased from Sterling Planet (wind power)equivalent to 100% of the anticipated electricity over two years.Task Lights at each desk in the Admin OfficePhoto: Ellenzweig. 2009Real Time DisplayPhoto: Jessica Parks.Harvard Office for Sustainability, 20094Please print this project profile only if necessary.If printing is required, please print double sided and recycle when finished. Thank you!

HARVARD FACULTY OF ARTS AND SCIENCES ‐ SCHREIBER LABDEPARTMENT OF CHEMISTRY AND CHEMICAL BIOLOGYINDOOR ENVIRONMENTAL QUALITYFAS is committed to providing a healthy indoor environment for all occupants. The project team was careful to maintainhealthy indoor air quality during construction and to also ensure the space is designed to promote healthy indoor airquality during occupancy.Indoor Air Quality During Construction: The building maintained occupancy throughoutconstruction. Thus, a comprehensive indoor air quality management plan was implementedduring construction to maintain healthy indoor air quality. All grills and vents were sealedand a HEPA Filtration unit maintained negative pressure to keep any construction debrisfrom migrating into occupied spaces.Thermal Comfort Survey: Occupants will be surveyed about their thermal comfort onceper season. The Operations team will adjust the heating or cooling in the project space asneeded.Construction IAQMeasures ImplementedDuring ConstructionPhotos: Harvard Office for Sustainability. 2008Pathway Interruption:Isolated work areasOnly Materials with Low or No VOC Content were used in the Schreiber Lab project.Volatile Organic Compounds (VOCs) are chemical compounds and known carcinogensfound in many construction materials that are considered detrimental to indoor air quality.Reducing the use of VOCs whenever possible improves indoor air quality and consequentlyoccupant health and productivity.Composite Wood and Laminate Adhesives used in the renovation do not have any added UreaFormaldehydeCarpet System Karastan Contract - Quillen MacCarthy Broadloom (Carpet and Rug Institute’s GreenLabel Plus) with NU Broadlok Premium Plus Carpet Adhesive (SCAQMD Rule #1168)Adhesives and Sealants and Paints and Coatings Examples of the products used:ProductCategoryPaints &CoatingsAdhesives&SealantsVOCVOCContent (g/l) Limit (g/l)Product & ManufacturerStandardEco Spec Latex Flat, Benjamin Moore050Green Seal GS-11Eco Spec Interior Latex Eggshell Enamel,Benjamin Moore0150Green Seal GS-11Fresh Start All Purpose Primer, Benjamin Moore49.5200SCAQMD Rule #1113DP 1010 Water Based Duct Sealant 30250SCAQMD Rule #1168Dow Corning 732 Multi-purpose sealant36250SCAQMD Rule #1168HVAC Protection:Duct equipment sealed with filterGreen Housekeeping:Schreiber Labparticipates in Harvard’s Facilities andMaintenance Operations (FMO) Green CleaningProgram, which uses 100% recycled paperproducts and Green Seal certified cleaningsolutions, among other green housekeepingpractices.Daylight and Views: In 96% of the regularlyoccupied spaces occupants have direct line ofsight to the outside.Schreiber LabPhoto: Jessica Eisenman Parks. Harvard Office for Sustainability. 20095Please print this project profile only if necessary.If printing is required, please print double sided and recycle when finished. Thank you!

HARVARD FACULTY OF ARTS AND SCIENCES ‐ SCHREIBER LABDEPARTMENT OF CHEMISTRY AND CHEMICAL BIOLOGYMATERIALS & WASTESelecting environmentally preferable materials andminimizing the amount of construction waste sent tolandfill was important to the project. The project wasable to use a large percentage of salvaged office andclassroom furniture from storage areas within theCabot Chemistry Complex. For the additionalmaterials purchased, the project gave preference tolow-emitting materials with recycled content and localmanufacturing.46%of the total material value consists of productssalvaged or manufactured locally.80%of the on-site generated construction wastewas diverted from the landfill.38%ENVIRONMENTALLY PREFERABLE MATERIALS INSCHREIBER LAB, NAITO BUILDING1912 Ultima Tegular Ceiling Tile (Armstrong)3% pre-consumer, 67% post-consumerMedite II MDF (Sierra Pine)100% pre-consumerUltra Touch Natural Cotton Fiber Building Insulation (JohnManville): 85% post-consumerDrywall (USG): 95% pre-consumerExamples of regional materials used in project:Product NameMillworkof the total value of materials used in theproject consist of materials with recycledcontent.ManufacturerNew England LabDistance between project& Manufacturer ( mi)13Fiberglass InsulationGuardian Fiberglass Inc.419DrywallUSG253Schreiber LabProf. Schreiber’s OfficePhoto: Ellenzweig. 2009ADDITIONAL RESOURCESHarvard FAS, Dept. of Chemistry and Chemical Biology: http://www.chem.harvard.eduHarvard FAS, Green Program: http://green.harvard.edu/fasHarvard FAS, Green Labs Program: http://green.harvard.edu/fas/green-labsHarvard OFS - Green Building Services: rvard OFS - Green Building Resource: http://green.harvard.edu/theresource6Please print this project profile only if necessary.If printing is required, please print double sided and recycle when finished. Thank you!

HARVARD FACULTY OF ARTS AND SCIENCES ‐ SCHREIBER LAB DEPARTMENT OF CHEMISTRY AND CHEMICAL BIOLOGY 4 Please print this project profile only if necessary. If printing is required, please print double sided and recycle when finished. Thank you! ENERGY EFFICIENCY The Faculty of Arts and Sciences (FAS) has committed, along with Harvard University as a whole, to reduce greenhouse

Related Documents:

LEED AP ID C Exam Specifications 22 LEED AP ND Exam Specifications 25 LEED AP O M Exam Specifications 27 REFERENCES & SAMPLE QUESTIONS 30 LEED AP BD C Exam References 30 LEED AP BD C Sample Questions 31 LEED AP HOMES Exam References 32 LEED AP HOMES Sample Questions 33 LEED AP ID C Exam References 34 LEED AP ID C Sample Questions 35

Using LEED Online: A Status Report and Key Updates By Michelle Reott About the current LEED Online The current version of LEED Online was originally developed for LEED v4 projects and released in 2014. The current LEED Online is the third version, after LEED Online v2 and LEED Online v3. (For those of us who have been working with LEED for over a

ENROLLING INTO THE NEW LEED AP WITH SPECIALTY. LEED USER, APRIL 19, 2011 hok.com. LEED USER, APRIL 19, 2011 hok.com. LEED USER, APRIL 19, 2011 hok.com. LEED USER, APRIL 19, 2011 hok.com. hok.com CREDENTIAL MAINTENANCE Two year cycle: LEED APs with specialty -30 hours total (minimum 6 LEED-specific)

LEED 2009 . Minimum Program Requirements . Apply to. LEED 2009 for New Construction and Major Renovations, LEED 2009 for Core & Shell development, LEED 2009 for Schools, LEED 2009 for Commercial Interiors, and LEED 2009 for Existing Buildings: Operations & Maintenance . Do not apply to LEED for Homes, LEED for Neighborhood Development, or any

LEED for Commercial Interiors LEED for Existing Buildings Several other LEED systems are under development or in pilot as well. LEED Rating System Using the LEED rating system, a project can become LEED certified by obtaining points for "green" building processes, systems, and materials. The four levels of LEED certification are

Costing for LEED for Homes vs LEED NC BD&C LEED for Homes is significantly less administratively involved, and requires less time than LEED NC BD&C. It is also less expensive. Ex. 8 storey 50,000 sqft building, 80 units LEED BD&C LEED for Homes Registration Costs 1,400 ( 1,225) 900 ( 700) Certification Costs 9,375 ( 6,925) 3,400

LEED v4 for BUILDING DESIGN AND CONSTRUCTION Updated July 1, 2015 Includes: LEED BD C: New Construction LEED BD C: Core and Shell LEED BD C: Schools . display, or distribute the LEED Rating System in any way for any public or commercial purpose. Unauthorized use of the LEED Rating System violates copyright, trademark, and other laws and is .

Projects must be LEED certified under the BD C or O M rating systems, or registered to pursue LEED O M certification. For projects pursuing LEED Zero Carbon, LEED Zero Energy, and LEED Zero Water certification: 1. Provide 12 months of performance data required for the desired certification to GBCI through LEED Online. 2.