Cisco Metro ME3600X 3800X Configuration Guide, Release 15 .
CH A P T E R9Configuring IP SLA—Service PerformanceTestingFirst Published: July 2013Last Updated: November 2013This chapter describes how to configure the ITU-T Y.1564 Ethernet service performance testmethodology to measure the ability of a network device to enable movement of traffic at the configureddata rate.Finding Feature InformationYour software release may not support all the features documented in this module. For the latest featureinformation and caveats, see the release notes for your platform and software release. To find informationabout the features documented in this module, and to see a list of the releases in which each feature issupported, see the Feature Information for Configuring IP SLA—Service Performance Testing, page 9-47.Use Cisco Feature Navigator to find information about platform support and Cisco software imagesupport. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account onCisco.com is not required.Contents Information About Service Performance Operations, page 9-2 How to Configure Y.1564 to Generate and Measure Ethernet Traffic, page 9-2 Understanding Ethernet Loopback, page 9-28 How to Configure Y.1564 to Generate and Measure IP Traffic, page 9-32Cisco ME 3800X and ME 3600X and ME 3600X-24CX Switch Software Configuration GuideOL-31717-019-1
Chapter 9Configuring IP SLA—Service Performance TestingInformation About Service Performance OperationsInformation About Service Performance OperationsY.1564 is an Ethernet service activation test methodology, and is the standard for turning up, installing,and troubleshooting Ethernet-based services. Y.1564 is the only standard test methodology that allowsa complete validation of Ethernet service-level agreements (SLAs) in a single test.Service performance testing is designed to measure the ability of a device under test (DUT) or a networkunder test to properly forward traffic in different states.Cisco implementation of ITU-T Y.1564 has three key objectives: To serve as a network SLA validation tool, ensuring that a service meets its guaranteed performancesettings in a controlled test time. To ensure that all the services carried by the network meet their SLA objectives at their maximumcommitted rate, proving that under maximum load, network devices and paths can support all thetraffic as designed. To perform medium-term and long-term service testing, confirming that network elements canproperly carry all the services while under stress during a soaking period.Service performance supports four operational modes: two-way statistics collection, one-way statisticscollection, passive measurement mode, and traffic generator mode. Statistics are calculated, collected,and reported to the IP SLAs module. The statistics database stores historical statistics pertaining to theoperations that have been executed. In the context of one-way statistics collection, both the passive measurement mode and the trafficgenerator mode are used in conjunction with each other. One device sends traffic as the generatorand another device receives traffic in the passive mode and records the statistics. The passive modeis distinct from the two-way mode, in that, the remote device records statistics instead of loopingback the traffic, and the sending device records only the transmit statistics. In the context of two-way statistics collection, all the measurements are collected by the sender. Forthe two-way statistics to work, the remote target must be in the loopback mode. Loopback mode,which enables the traffic from the sender to reach the target and be returned to the sender. The passive measurement mode is enabled by excluding a configured traffic profile. A passivemeasurement operation does not generate live traffic. The operation collects only statistics for thetarget configured for the operation. The traffic generator mode records transmit statistics for the number of packets and bytes sent.For more information, see the Confi
Service performance supports four operational modes: two-way statistics collection, one-way statistics collection, passive measurement mode, and traffic generator mode. Statistics are calculated, collected, and reported to the IP SLAs module. The statistics database stores historical statistics
Apr 05, 2017 · Cisco 4G LTE and Cisco 4G LTE-Advanced Network Interface Module Installation Guide Table 1 Cisco 4G LTE NIM and Cisco 4G LTE-Advanced NIM SKUs Cisco 4G LTE NIM and Cisco 4G LTE-Advanced NIM SKUs Description Mode Operating Region Band NIM-4G-LTE-LA Cisco 4G LTE NIM module (LTE 2.5) for LATAM/APAC carriers. This SKU is File Size: 2MBPage Count: 18Explore furtherCisco 4G LTE Software Configuration Guide - GfK Etilizecontent.etilize.comSolved: 4G LTE Configuration - Cisco Communitycommunity.cisco.comCisco 4G LTE Software Configuration Guide - Ciscowww.cisco.comCisco 4G LTE-Advanced Configurationwww.cisco.com4G LTE Configuration - Cisco Communitycommunity.cisco.comRecommended to you b
Cisco ASA 5505 Cisco ASA 5505SP Cisco ASA 5510 Cisco ASA 5510SP Cisco ASA 5520 Cisco ASA 5520 VPN Cisco ASA 5540 Cisco ASA 5540 VPN Premium Cisco ASA 5540 VPN Cisco ASA 5550 Cisco ASA 5580-20 Cisco ASA 5580-40 Cisco ASA 5585-X Cisco ASA w/ AIP-SSM Cisco ASA w/ CSC-SSM Cisco C7600 Ser
Cisco 3560 & 3750 NetFlow Configuration Guide Cisco Nexus 7000 NetFlow Configuration Cisco Nexus 1000v NetFlow Configuration Cisco ASR 9000 NetFlow Configuration Appendix. 8 Cisco NetFlow Configuration Cisco 3560X & 3750X NetFlow Configuration Your software release may not support all the features documented in this module.File Size: 2MB
Cisco 3560 & 3750 NetFlow Configuration Guide Cisco Nexus 7000 NetFlow Configuration Cisco Nexus 1000v NetFlow Configuration Cisco ASR 9000 NetFlow Configuration Appendix. 3 Cisco NetFlow Configuration Cisco IOS NetFlow Configuration Guide Netflow Configuration In configuration mode issue the following to enable NetFlow Export:
Deployed as a pre-aggregation platform for mobile backhaul, the Cisco ME 3800X Series can aggregate Cisco MWR 2941-DC Mobile Wireless Routers and use Multiprotocol Label Switching (MPLS) as a transport for Radio Access Network (RAN) backhaul traffic. It offers timing se
Supported Devices - Cisco SiSi NetFlow supported Cisco devices Cisco Catalyst 3560 Cisco 800 Cisco 7200 Cisco Catalyst 3750 Cisco 1800 Cisco 7600 Cisco Catalyst 4500 Cisco 1900 Cisco 12000 Cisco Catalyst 6500 Cisco 2800 Cisco ASR se
Cisco Nexus 1000V Cisco Nexus 1010 Cisco Nexus 4000 Cisco MDS 9100 Series Cisco Nexus 5000 Cisco Nexus 2000 Cisco Nexus 6000 Cisco MDS 9250i Multiservice Switch Cisco MDS 9700 Series Cisco Nexus 7000/7700 Cisco Nexus 3500 and 3000 CISCO NX-OS: From Hypervisor to Core CISCO DCNM: Single
Counselling skills will be selected from the range below: Active listening Reflection Paraphrasing Summarising. Open questioning Body language 2 A record of feedback from others in relation to counselling skills Candidates must take account of the feedback from the teacher/lecturer. 3 A record of the candidate’s identified areas for improvement The Assessment Support Pack (ASP) for this Unit .
