30RB060-390 AIR-COOLED LIQUID CHILLERS WITH
30RB-2SB30RB060-390AIR-COOLED LIQUID CHILLERSWITH COMFORTLINK CONTROLS60 Hz— PERFORMANCE DATA— CERTIFIED DIMENSIONAL PRINTS— FIELD WIRING DIAGRAM Copyright 2005 Carrier Corporation Syracuse, New York 13221Form 30RB-2SBReplaces: 30RB-1SBPrinted in U.S.A.5-05Catalog No. 04-51300001-01
Date:Supersedes:30RB060-390AIR-COOLED LIQUID CHILLERSJOB NAME:LOCATION:BUYER:BUYER P.O.#UNIT NUMBER:MODEL NUMBER:PERFORMANCE DATA CERTIFIED BY:30RBRev:-2SBCARRIER#DATE:DESCRIPTIONAll 30RB060-390 units are packaged air-cooled liquid chillers that are factory wired, refrigerant piped, andcharged with R-410a refrigerant. Any 30RB units with the remote cooler option require field-installed piping,controls, and must be field charged with additional refrigerant. Weatherproof construction and compact designmakes 30RB units ideal for rooftop or ground level installation. Upward discharge airflow minimizes directionalsound and dissipates heat away from surrounding areas.FEATURESCompression Hermetic scroll compressors are maintenance free and protected by an auto-adaptive control that minimizes compressorwear. External and internal compressor motor protection. Complete oil charge.Refrigerant Circuit Unit sizes 060-190 have dual independent refrigerant circuits.Unit sizes 210-300 have three independent refrigerant circuits.Unit sizes 315-390 have four independent refrigerant circuits. Low and high side fusible plugs. Moisture indicating sight glass. Electronic expansion valve with integral sight glass. Filter drier, removable core. Optional non-removable core filterdrier is available for unit sizes 060-100. Discharge and liquid line service valves. An optional suctionservice valve is available. Complete operating refrigerant charge, except for remotecooler option.Air-Cooled Condenser Air-cooled condenser coils are constructed with aluminumplate fins (copper fins optional) mechanically bonded to seamless copper tubes with an integral subcooling circuit. Specially designed 3-phase, direct-drive, condenser-fan motors,permanently lubricated bearings. External and internal fan motor protection. Condenser fans are 9-blade, shrouded axial type, statically anddynamically balanced, discharging air vertically.Cooler Integral shell and tube cooler with 3/4-in. (19 mm) closed cellpolyvinyl chloride foam insulation with a maximum watersidepressure of 300 psig (2068 kPa).2Controls Microprocessor-based leaving water temperature control withreturn water compensation. Loss of charge protection included. Automatic lead-lag circuit operation. Seven-day time schedule. Chilled water pump start/stop control and primary/stand-bysequencing to ensure equal pump run time. Dual chiller control for parallel chiller applications withoutadditional hardware, modules, or control panels. Unoccupied low sound operation to limit condenser fan soundduring scheduled periods. Maintenance scheduling to signal maintenance activities forpumps and strainers. Low chilled water flow protection is provided via an electronicthermal dispersion flow switch. High-pressure switch. Intermediate season head pressure control. Microprocessor control includes keypad with diagnostic display with access to set points, time and date, system statusincluding % capacity, operating temperatures and pressures,and alarm conditions. Periodic pump start to ensure pump seals are properly maintained during off-season.Cabinet Cabinet constructed of galvanized steel, phosphatized zinc,with electrostatically applied high solids, polyester bakedenamel finish with hinged access panels.Hydronic Package Option Optional hydronic pump packages are available (unit sizes 060190) in single and dual pump arrangements with a maximumwaterside pressure of 150 psi (1034 kPa). A strainer, combination valve, and pressure taps are provided with the package.
PERFORMANCE DATA (English)COOLEREntering Water Temperature FLeaving Water Temperature FChilled Water Flow gpmChilled Water Pressure Drop ft wgFouling Factor hr ft2 F/BtuFluidConcentration %UNITCapacity TonsCompressor Power Input kWUnit Power Input kWMax. Operating Outdoor Temperature FCapacity Control StepsMinimum Capacity %Condenser Entering Air Temperature FCUT ALONG DOTTED LINEPERFORMANCE DATA (SI)COOLEREntering Water Temperature CLeaving Water Temperature CChilled Water Flow l/sChilled Water Pressure Drop m wgFouling Factor m2 C/WFluidConcentration %UNITCapacity kWCompressor Power Input kWUnit Power Input kWMax. Operating Outdoor Temperature CCapacity Control StepsMinimum Capacity %Condenser Entering Air Temperature CELECTRICAL DATAPower Supply to Unit V, 3 ph, 60 HzPower ConnectionMinimum Circuit AmpacityMax. Fuse AmpsRecommended Fuse Amps Single DualCUT ALONG DOTTED LINEOPTIONS AND ACCESSORIES FACTORY-INSTALLED OPTIONSPre-Coat Aluminum Fin/Copper Tube Condenser CoilE-Coat Aluminum Fin/Copper Tube Condenser CoilCopper Fin/Copper Tube Condenser CoilE-Coat Copper Fin/Copper Tube Condenser CoilBACnet TranslatorCompressor Sound EnclosuresCondenser Coil Trim PanelsCooler HeatersEnergy Management ModuleHail GuardsLON TranslatorMinimum Load ControlLow Ambient Temperature Head Pressure ControlNon-Fused DisconnectNon-Removable Core Filter Drier (060-100)Remote Cooler (060-190)Service Package (GFI-CO, Remote Service Port)Security Grilles, Upper and LowerSuction Line InsulationSuction Service ValveMedium Temperature Brine OperationHydronic PackageSingleDualHp FIELD-INSTALLED ACCESSORIESBACnet TranslatorChillervisor System ManagerCondenser Coil Trim PanelsDataLINK ControlDataPort ControlEnergy Management ModuleGround Fault Interrupter-Convenience Outlet (GFI-CO)Hail GuardsLON TranslatorMinimum Load ControlLow Ambient Temperature Head Pressure ControlNavigator DisplayRemote Cooler (060-190)Remote Enhanced DisplayRemote Service PortSecurity Grilles, LowerSecurity Grilles, UpperSignal RepeaterSignal Repeater, Power Supply 3
4FRONT VIEWCERTIFIED DIMENSION PRINTTOP VIEWSIDE VIEW
5FRONT VIEWTOP VIEWCUT ALONG DOTTED LINECERTIFIED DIMENSION PRINTSIDE VIEWCUT ALONG DOTTED LINE
6FRONT VIEWTOP VIEWCERTIFIED DIMENSION PRINTSIDE VIEW
7FRONT VIEWTOP VIEWCUT ALONG DOTTED LINECERTIFIED DIMENSION PRINTCUT ALONG DOTTED LINESIDE VIEW
8FRONT VIEWTOP VIEWCERTIFIED DIMENSION PRINTSIDE VIEW
9CUT ALONG DOTTED LINEFRONT VIEWTOP VIEWCERTIFIED DIMENSION PRINTCUT ALONG DOTTED LINESIDE VIEW
10FRONT VIEWTOP VIEWCERTIFIED DIMENSION PRINTSIDE VIEW
11CUT ALONG DOTTED LINECERTIFIED DIMENSION PRINTFRONT VIEWTOP VIEWCUT ALONG DOTTED LINESIDE VIEW
12CERTIFIED DIMENSION PRINTFRONT VIEWTOP VIEWSIDE VIEW
13CUT ALONG DOTTED LINECERTIFIED DIMENSION PRINTTOPVIEWFRONT VIEWCUT ALONG DOTTED LINESIDE VIEW
14FRONT VIEWTOP VIEWCERTIFIED DIMENSION PRINTSIDE VIEW
15FRONT VIEWTOP VIEWCUT ALONG DOTTED LINECERTIFIED DIMENSION PRINTSIDE VIEWCUT ALONG DOTTED LINE
16FIELD WIRING DIAGRAM
Discharge and liquid line service valves. An optional suction service valve is available. Complete operating refrigerant charge, except for remote cooler option. Air-Cooled Condenser Air-cooled condenser coil
LDAP on OS/390 Server packaged as part of the OS/390 Security Server Client packaged as part of the OS/390 base prior to OS/390 2.8 With OS/390 2.8, both server and client packaged as part of the OS/390 Security Server, always enabled Many possibilities for OS/390 server configuration: sysplex, multiserver, or single server DB2, RACF, or both
is just “starting out” then the 390 is for you. This is Graco’s lightest professional sprayer weighing in at only 30 lb! The 390 is the ideal sprayer for residential jobs because it is so lightweight and portable. Hands down the 390 is the best value in small electric sprayers. 390 390 DESCRIPTION PART #: 390 Stand 253958 390 Hi-Boy 262019
275429 - Vanguard Twin Cylinder OHV Liquid-Cooled Engines MS-0750 - Vanguard 3-Cylinder OHV Liquid-Cooled Gasoline Engines MS-1055 - Vanguard 3-Cylinder OHV Liquid-Cooled Diesel Engines Quality Starts With A Master Service Technician Other Briggs & Stratton Commercial Power Repair Manuals: Vanguard Twin Cylinder OHV Liquid-Cooled .
Air Cooled Chiller Air Air 2 Air Air 6 AIR COOLED CHILLERS Air-cooled chillers are refrigeration machines that remove heat from cooling loads using chilled water and reject this heat into the atmosphere using refrigerant. THEY ALL HAVE fans, condenser coils, and compressors. Air-cooled chillers are used to provide cooling for human comfort and electronic equipment as well as industrial process .
Maximum Series portable chillers can be used on a variety of process applications that require 20 F to 80 F chilled water. MAXIMUM SERIES † Air & Water-Cooled † 1/4 to 40 Tons † 20 F to 80 F † Using Non-Ozone Depleting Refrigerants 10 ton air-cooled model 10 ton water-cooled model 2 ton water-cooled model 1 ton air-cooled model
ACH Air-Cooled, Horizontal Air Flow ACV Air-Cooled, Vertical Air Flow ACR Air-Cooled Remote Condenser WCC Water-Cooled Condenser Digit 6 — Chilled Water System P Recirculating System, Tank and Pump M Single Pass Chiller Unit (no tank and pump) Digit 7 — Cabinet Type H Horizontal Low Profile V Vertical Upright
Vanguard Air-Cooled V-Twin Specifications Performance Curves 14 HP Vanguard Air-Cooled V-Twin 16 HP Vanguard Air-Cooled V-Twin 15.0 5.2 Kilowatt 7.5 8.2 9.0 9.7 10.4 111.2 111.9 14.0 13.0 12.0 11.0 10.0 9.0 8.0 7.0 16.0 6.7 6.0 HP 1800 2000 2200 24002600 2800 3000 3200 3400 3600 17.0 12.7 REVOLUTIONS PER MINUTE RATED GROSS BHP MAXIMUM .
vRelease Version July 2019 CUDA Runtime API API Reference Manual
