Accessing The DIP Switches - PMP Corporation
Before installing or working on the printer - We strongly recommend powering down the systemwhen installing or changing DIP switch settings. The power switch is located on the front of printerright side.Contents:Accessing Dip switches .Page 1G-Site .Page 2Setting Dip switchesGender ChangerPassport .Page 3Setting Dip switchesConnecting cash drawerInstalling paper .Page 4Clearing paper jam .Page 4Printer self-test.Page 5For the printer to operate correctly, it needs the proper DIP switch settings.1.Accessing the DIP Switches Turn the printer on its side and remove the screw from DIP switch cover on bottom of printer. Set DIP switches using a pointed tool such as a straightened paper clip or a small flat bladescrewdriver.Power SwitchDip SwitchCover Page 1 of 5
2. Gilbarco G-SiteTM-T88 printers need the correct Dip switch setting and a “Gender Changer” to operate with a GSite system.DIP Switch OffOffOffOffOffOffOffGender Changer Gilbarco # Q13180-50The Gender Changer is plugged into the back of TMT-88III or TMT-88IV printer. Once firmly seatedin place, tighten both knurled screws.Page 2 of 5
3. Gilbarco ffOffOffOffOffOffOffDIP switch DWS1 position 4 must be switched to the “ON” position when used on a Passportsystem.No Gender Changer is needed when using the TM-T88III or TM-T88IV with a Passport System. Theprinter cable coming from the printer and going to the Passport is connected into a RS232 converteron PassportThe cash drawer is connected on the back of the TM-T88IV printer when using the printer in aPassport system.PMP Corporation 25 Security Drive PO Box 422 Avon, CT 06001Page 3 of 5
4. Installing Paper RollA. Open the printer cover by pressing the cover open button on right top of printer.B. Remove any unused paper or empty paper cores. Insert a new roll of paper as shown below.C. When installing a roll of paper – cleanly cut off at least 12 inches of paper. This preventsadhesive from the paper getting into the printer mechanism.D. Pull out enough paper to extend past the front of the printer, close the cover and tear offpaper as shown below.E. Use good quality paper. To confirm that it’s thermal paper, scratch the paper on thesensitive side with your fingernail. A dark line will appear if it is thermal paper.Size: 80mm, Max outside dia.: 83mm, Paper type: NTP080-80Open CoverInstall PaperTear off Paper5. Removing Jammed PaperA. Turn the printer off and press the cover open button.B. Remove any jammed paper, close cover.C. If paper is caught in the cutter, and the printer cover will not open, you will need to slide thecutter cover open.D. Turn the cutter knob until you see a triangle in the window opening. This will return cutterto normal position.Open CoverOpen Cutter CoverWindowCutter KnobPMP Corporation 25 Security Drive PO Box 422 Avon, CT 06001Page 4 of 5
6. Performing Printer Self-testLoading PaperControl PanelA. Load the paper into the printer to perform a printer self-test.B. While holding down the FEED button on the control panel, turn power “ON” to printer.Release the feed button once printing has started.C. The paper out LED starts to flash when printing operation is done.D. The content of the self-test shows the current status of the printer.E. To continue the self-test, press the paper feed button again.F. When the self-test is complete, the final line will read ***completed***G. The unit will then enter the normal operation mode with all settings initialized.All product or company’s names, trade names, trademarks, parts numbers and part descriptions may be the trademarks of theirrespective owners, and are used for reference or identification purposes only. PMP does not claim any right to or affiliation with suchowners. The PMP product described here is manufactured or remanufactured and sold by PMP and is not the product of any otheridentified manufacturer. Page 5 of 5
TM-T88 printers need the correct Dip switch setting and a “Gender Changer” to operate with a G-Site system. DIP Switch Settings DWS1 DWS2 Position Switch Setting 1 Off 2 Off 3 Off 4 Off 5 6Off 6 7Off 7 8On 8 Off Gender Changer Gilbarco # Q13180-50 The Gender Changer i
Option B – PMP credential and PgMP credential will share PDUs including those earned for the PgMP before obtaining the PMP and any PDUs earned after receiving the PMP. The PMP renewal date will be set equal to the existing PgMP renewal date. Therefore, renewal of the PMP credential will need to occur with the renewal of the PgMP credential.File Size: 549KBPage Count: 9Explore furtherHow to fill PMP Application form: Here's PMP Sample .www.izenbridge.comYour PMP Application Checklist - Project Management Institutewww.pmi.orgAre you stressing out over completing the application to .www.margaretmeloni.comRecommended to you b
May 02, 2018 · D. Program Evaluation ͟The organization has provided a description of the framework for how each program will be evaluated. The framework should include all the elements below: ͟The evaluation methods are cost-effective for the organization ͟Quantitative and qualitative data is being collected (at Basics tier, data collection must have begun)
Silat is a combative art of self-defense and survival rooted from Matay archipelago. It was traced at thé early of Langkasuka Kingdom (2nd century CE) till thé reign of Melaka (Malaysia) Sultanate era (13th century). Silat has now evolved to become part of social culture and tradition with thé appearance of a fine physical and spiritual .
In the 3 GHz band, the PMP 450m AP is capable of communicating with up to 4 subscribers simultaneously, supporting a total of up to 8 streams. The PMP 450m AP is interoperable with PMP 450, PMP 450i and PMP 450b subscribers (referred to as PMP 450 series subscribers). The rest of this document describes the PMP 450m AP in the 5 GHz band.
On an exceptional basis, Member States may request UNESCO to provide thé candidates with access to thé platform so they can complète thé form by themselves. Thèse requests must be addressed to esd rize unesco. or by 15 A ril 2021 UNESCO will provide thé nomineewith accessto thé platform via their émail address.
̶The leading indicator of employee engagement is based on the quality of the relationship between employee and supervisor Empower your managers! ̶Help them understand the impact on the organization ̶Share important changes, plan options, tasks, and deadlines ̶Provide key messages and talking points ̶Prepare them to answer employee questions
Dr. Sunita Bharatwal** Dr. Pawan Garga*** Abstract Customer satisfaction is derived from thè functionalities and values, a product or Service can provide. The current study aims to segregate thè dimensions of ordine Service quality and gather insights on its impact on web shopping. The trends of purchases have
Source: PMI PMP Certification Handbook PMP Exam Format PMP Exam Blueprint From the PMP Examination Content Outline Domain Percentage of Questions Initiation 13% Planning 24% Executing 31% Monitoring and Controlling 25% Closing 7% TOTAL 100% Note: PMP Exam Format will change from July 01, 2020. Source: PMI PMP Certification Handbook
