Terrova Freshwater Trolling Motor Installation Instructions
TERROVABOW-MOUNT TROLLING MOTORInstallation Instructions
INTRODUCTIONTHANK YOUThank you for choosing Minn Kota. We believe that you should spend more time fishing and less time positioning your boat. That’s whywe build the smartest, toughest, most intuitive trolling motors on the water. Every aspect of a Minn Kota trolling motor is thought outand rethought until it’s good enough to bear our name. Countless hours of research and testing provide you the Minn Kota advantagethat can truly take you “Anywhere. Anytime.” We don’t believe in shortcuts. We are Minn Kota. And we are never done helping you catchmore fish.REGISTRATIONRemember to keep your receipt and immediately registeryour trolling motor. A registration card is included with yourmotor or you can complete registration on our website atminnkotamotors.com/register.SERIAL NUMBERYour Minn Kota 11-character serial number is very important. Ithelps to determine the specific model and year of manufacture.When contacting Consumer Service or registering your product,you will need to know your product’s serial number.We recommend that you write the serial number down so thatyou have it available for future reference.Made by Minn KotaJohnson OutdoorsMarine Electronics, Inc.121 Power DriveMankato, MN 56001 USATrolling MotorsProduced in XXXXPRODUCT DESCRIPTIONMODEL XXXXXXXXXV DCXX ASER NO YYDDDC00000EXAMPLENOTICE: The serial number on your Terrova is locatedinside the mount below the motor rests.MOTOR INFORMATION (For Consumer Reference Only)Model:Serial Number:Purchase Date:Store Where Purchased:NOTICE: Do not return your Minn Kota motor to your retailer. Your retailer is not authorized to repair or replace this unit.You may obtain service by: calling Minn Kota at (800) 227-6433; returning your motor to the Minn Kota Factory Service Center;sending or taking your motor to any Minn Kota authorized service center. A list of authorized service centers is available on ourwebsite at minnkotamotors.com. Please include proof of purchase, serial number and purchase date for warranty service with anyof the above options.2 minnkotamotors.com 2022 Johnson Outdoors Marine Electronics, Inc.
SAFETY CONSIDERATIONSPlease thoroughly read the user manual. Follow all instructions and heed all safety and cautionary notices. Use of this motor is onlypermitted for persons that have read and understood these user instructions. Minors may use this motor only under adult supervision.WARNINGYou are responsible for the safe and prudent operation of your vessel. We have designed your Minn Kota product to be an accurateand reliable tool that will enhance boat operation and improve your ability to catch fish. This product does not relieve you from theresponsibility for safe operation of your boat. You must avoid hazards to navigation and always maintain a permanent watch so you canrespond to situations as they develop. You must always be prepared to regain manual control of your boat. Learn to operate your MinnKota product in an area free from hazards and obstacles.WARNINGNever run the motor out of the water, as this may result in injuries from the rotating propeller. The motor should be disconnected fromthe power source when it is not in use or is off the water. When connecting the power-supply cables of the motor to the battery, ensurethat they are not kinked or subject to chafe and route them in such a way that persons cannot trip over them. Before using the motormake sure that the insulation of the power cables is not damaged. Disregarding these safety precautions may result in electric shortsof battery(s) and/or motor. Always disconnect motor from battery(s) before cleaning or checking the propeller. Avoid submerging thecomplete motor as water may enter the lower unit through control head and shaft. If the motor is used while water is present in the lowerunit considerable damage to the motor can occur. This damage will not be covered by warranty.WARNINGTake care that neither you nor other persons approach the turning propeller too closely, neither with body parts nor with objects.The motor is powerful and may endanger or injure you or others. While the motor is running watch out for persons swimming and forfloating objects. Persons who lack the ability to run the motor or whose reactions are impaired by alcohol, drugs, medication, or othersubstances are not permitted to use this motor. This motor is not suitable for use in strong currents. The constant noise pressure level ofthe motor during use is less than 70dB(A). The overall vibration level does not exceed 2,5 m/sec2.WARNINGWhen stowing or deploying the motor, keep fingers clear of all hinge and pivot points and all moving parts. In the event of unexpectedoperation, remove power leads from the battery.WARNINGIt is recommended to only use Johnson Outdoors approved accessories with your Minn Kota motor. Using non-approved accessoriesincluding to mount or control your motor may cause damage, unexpected motor operation and injury. Be sure to use the product andapproved accessories, including remotes, safely and in the manner directed to avoid accidental or unexpected motor operation. Keep allfactory installed parts in place including motor and accessory covers, enclosures and guards. 2022 Johnson Outdoors Marine Electronics, Inc.minnkotamotors.com 3
KNOW YOUR rdGunwaleTransomSternGunwaleBowSternHull4 minnkotamotors.com 2022 Johnson Outdoors Marine Electronics, Inc.
INSTALLATIONINSTALLING THE TERROVAYour new Terrova comes with everything you’ll need to directly install it to the boat. This motor can be directly mounted to the boat orcoupled with a Minn Kota quick release bracket for ease of mounting and removal. For installation with a quick release bracket, referto the installation instructions provided with the bracket. For compatible quick release mounting brackets and to locate your nearestdealer, visit minnkotamotors.com. To install the motor directly to the boat, please follow the instructions provided in this manual. Pleasereview the parts list, mounting considerations and tools needed for installation prior to getting started. For additional product support,please visit minnkotamotors.com.INSTALLATION PARTS LISTItem /AssemblyPart #AA2994864BAG ASSEMBLY - (BOLT, NUT, WASHERS)112263462BOLT-MOUNTING-1/4X2 W/STG622261713WASHER-1/4632263103NUT NYLOK 1/4-20 MTG642301720WASHER-MOUNTING RUBBER65 62390800 tÂDescriptionQty.MOTOR ASSEMBLY1LANYARD, REMOTE W/ CARABEENER172994075 tREMOTE ASY, IPILOT1p2397106 tMANUAL, QUICK REF., IPILOT 1.6182994076 ÂREMOTE ASSEMBLY LINK TOUCHSCREEN192373241 ÂCABLE, USB REMOTE CHARGER LINK1102375901 ÂADAPTER, USB DC POWER LINK1112996400 tÂHEADING SENSOR ASSEMBLY *SELECT MODELS ONLY*112490389-1 ÂCABLE, ETH (M12-M-M12-F, 30'12211415 ÌCABLE-EXTENSION, PD/AP 110" *PRE-INSTALLED*1490507-1 â1314151617CABLE, ADP-INT MDI 14 M12-120" *PRE-INSTALLED*12092600PIN-DRIVE 1.06" LG (SS)12262658PIN-DRIVE 1" X 3/16" S/S12151726WASHER-5/16 STD (S/S)12091701WASHER-PROP (LARGE)12053101NUT-PROP,NYLOC (MED) 5/16 SS12093101NUT-PROP,NYLOC,LG, 3/8 SS12091160PROP-WW2 (3-5/8") REAMED12341160PROP-WW2 (4.5) W/ADP.RING12331160PROP-WW2 (4") W/ADP.RING1BB1378131PROP IND 2091160 WDLS WDG II1CC1378160PROP KIT 2341160 112# WW21DD1378132PROP IND 233160 WDLS WDG II1EE2994722FT PED ASY, TRV, W/SPOT LCK1FF2994859BAG, ASY-TERROVA/V2, RUB BUMPERS1182325110PAD, FOOT PEDAL5p2327132INSTALLATION INSTRUCTIONS TERROVA1p2397107 ÂMANUAL, QUICK REF., IPILOT LINK 3.01p Not shown on Parts Diagram. This part is included in an assembly and cannot be ordered individually.t Only available with models factory installed with i-Pilot. Only available with models factory installed with i-Pilot Link.78111312109618FFEE541AA2315161417BBCCDDÌ Only available with models factory installed with Universal Sonar.â Only available with models factory installed with Built-in MEGA Down Imaging. 2022 Johnson Outdoors Marine Electronics, Inc.minnkotamotors.com 5
INSTALLING THE TERROVAMOUNTING CONSIDERATIONSIt is recommended that the motor be mounted as close to the centerline of the boat aspossible. Make sure the area under the mounting location is clear to drill holes and installnuts and washers. Make sure the motor rest is positioned far enough beyond the edge ofthe boat. The motor must not encounter any obstructions as it is lowered into the wateror raised into the boat when stowed and deployed. Consider a quick release or adapterbracket with the installation of your motor. To view a list of accessories, please visitminnkotamotors.com.View accessoriesavailable for yourtrolling motor atminnkotamotors.com.TOOLS AND RESOURCES REQUIRED #3 Phillips Screw Driver Drill 9/32” Drill Bit 7/16” Box End Wrench A second person to help withthe installationINSTALLATIONINSTALLING THE TERROVA1a.Place the mount on an elevated, level surface suchas a workbench or the tailgate of a pickup. Themotor, as removed from the box, should be in thestowed position.b.Remove the four sideplate screws using a #3 Phillipsscrewdriver. Two of these screws will be located oneach side of the mount.1bNOTICE: This motor weighs approximately 65lbs.We recommend having a second person help withthe installation.Sideplate ScrewDeployed6 minnkotamotors.comStowed 2022 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE TERROVA2c.Remove the Right Sideplate.d.Swing the Left Sideplate out and away from theBase Extrusion.2d2cBase ExtrusionLeft SideplateRight Sideplate3e.Make sure that the Power Cables from the batteryare disconnected, or that the breaker,if equipped, is "off."Power CablesWARNINGMake sure the motor is mounted on a level surface and is notconnected to a power source.4f.Place the mount as close to the centerline or keelof the boat as possible. The motor can be installedon either the Port or Starboard side of the boatbased on personal preference. Check placementwith the motor in the stowed and deployed positions.Review the mounting considerations at thebeginning of the installation.Keel 2022 Johnson Outdoors Marine Electronics, Inc.Deck of Boatminnkotamotors.com 7
INSTALLING THE TERROVA5ITEM(S) NEEDED#4 x 6g.When the motor is in the deployed position, makesure that the Shaft is 1-1/2" out past the Gunwale ofthe boat. The lower unit, when stowed and deployedmust not encounter any obstructions.h.Check to be sure that the mount is level. Use theRubber Washers (Item #4) provided to create a levelsurface if necessary.Gunwale1-1/2"MinimumShaft6i.It is recommended to mark at least 4 of the 6 holesin the Base Extrusion and to have a minimum oftwo bolts on each side that are located the farthestapart. Ideal installation would allow for 6 bolts to beused, with a minimum of 4.j.Drill through the deck of the boat using a 9/32" DrillBit on the marked locations.Drilling LocationsBase ExtrusionDrilling Locations8 minnkotamotors.com 2022 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE TERROVA7ITEM(S) NEEDED#2 x 6#1 x 6#3 x 6k.Put a 1/4-20 x 2" (Item #1) screw in each of thedrilled locations. The screw should pass throughthe Base Extrusion and the boat deck. If the rubberwashers (Item #4) are used, they should sit betweenthe Base Extrusion and boat deck. Make sure tosecure the motor with screws on each side of theBase Extrusion.l.Place a Flat Washer (Item #2) and then a Nylock Nut(Item #3) at the end of each screw as shown andsecure. Make sure all hardware is secure.#4 x 6ScrewRubberWasherNOTICE: To prevent seizing of the stainless steelhardware, do not use high speed installation tools.Wetting the screws or applying an anti-seize may helpprevent seizing.8m. Replace the Right Sideplate.n.Nylock NutFlat WasherBoat Deck8nSwing the Left Sideplate back into its correctposition on the Base Extrusion.8mBase ExtrusionLeft SideplateRight Sideplate 2022 Johnson Outdoors Marine Electronics, Inc.minnkotamotors.com 9
INSTALLING THE TERROVA9o.Replace the four sideplate screws using a #3 or #2Phillips screwdriver. Two of these screws will belocated on each side of the mount.Sideplate Screw10ITEM(S) NEEDED#18 x 5p.#EE x 1Take the Foot Pedal (Item #EE) and turn it over.Put a Foot Pedal Pad (Item #18) in each of thepad locations.NOTICE: The pads are recommended when using theFoot Pedal on non-carpeted surfaces.10 minnkotamotors.comFoot PedalBottomFoot PedalPad Placement 2022 Johnson Outdoors Marine Electronics, Inc.
IDENTIFYING TROLLING MOTOR FEATURES BY THEIR ASSOCIATED CABLESIDENTIFYING TROLLING MOTOR FEATURES BY THEIR ASSOCIATED CABLESYour trolling motor may be pre-installed with Built-In MEGA Down Imaging OR Universal Sonar, and may include i-Pilot Link. All of thesefeatures require cables to be connected to an output device. These connections are present on the trolling motor and have cables thatexit below the Control Head. To better identify cables present, refer to the diagrams below that detail what the Built-In MEGA DownImaging, Universal Sonar and i-Pilot Link cable connectors look like.Built-In MEGA Down ImagingUniversal SonarFourteen Pin ConnectorFour Pin ConnectorLocking CollarBuilt-In MEGADown Imaging fromControl Headi-Pilot LinkEight Pin ConnectorLocking CollarUniversal SonarCable fromControl Headi-Pilot Link Ethernet Cablefrom Control HeadIf one connection below the Control Head is present, the motor may be equipped with:1. i-Pilot and Universal Sonar,2. i-Pilot and Built-in MEGA Down Imaging,3. ONLY Universal Sonar, or4. ONLY Built-in MEGA Down Imaging.NOTICE: The i-Pilot system does not have an externalwired connection.If two connections below the Control Head are present, the motor may be equipped with either:1. i-Pilot Link and Universal Sonar or2. i-Pilot Link and Built-in MEGA Down ImagingOne ConnectionBuilt-in MEGADown Imaging orUniversal SonarControl HeadTwo Connectionsi-PilotLinkControl HeadBuilt-in MEGADown Imaging orUniversal SonarCoil CordCoil CordROUTING CONNECTION CABLESPlease follow these instructions for routing any and all of the cables present for any of the pre-installed features that may come with yourtrolling motor. This routing should be followed whether there are one or two connection cables present. If you are unsure of the cablespresent, please review the “Identifying Trolling Motor Features By Their Associated Cables” section of these Installation Instructions. 2022 Johnson Outdoors Marine Electronics, Inc.minnkotamotors.com 11
ROUTING CONNECTION CABLES1a.Place the motor in the deployed position.b.Locate the Built-in MEGA Down Imaging, i-Pilot Linkand/or Universal Sonar cable(s), at the base of theControl Head.One ConnectionTwo Connectionsc.The cable(s) should be fed all the way throughthe Coil Cord. It/they should exit the Coil Cord atthe bottom of the Coil Cord, where it connects tothe Mount.Two Connectionsi-PilotLinkControl HeadBuilt-in MEGADown Imaging orUniversal SonarControl Headi-Pilot LinkBuilt-in MEGADown Imaging orUniversal SonarUniversal SonarConnectorNOTICE: Universal Sonar connector shown forillustration purposes.2Control HeadCoil CordCAUTIONNot following the recommended wire routing for the Built-inMEGA Down Imaging, i-Pilot Link and/or Universal Sonarcable(s), if equipped, may cause damage to the product andvoid your product warranty. Route cables away from pinchpoints or other areas that may cause them to bend in sharpangles. Routing the cables in any way other than directed maycause damage to the cables by being pinched or severed.Built-in MEGADown Imaging orUniversal SonarCoil CordOne ConnectionBuilt-in MEGADown Imaging orUniversal SonarControlHeadCoil CordMountCoilCordMount12 minnkotamotors.comNOTICE: After the cable(s) exit(s) the Coil Cord, it/theyshould be routed through an established routing system onthe boat, in an area with minimal interference. Power cablesor other elements that may produce interference for thesonar signals. Inspect the selected route carefully to ensurethat there are no sharp edges, obstacles, or obstructionsthat may damage the cables. 2022 Johnson Outdoors Marine Electronics, Inc.
FEATURE OVERVIEW AND CONNECTING THE CABLESFEATURE OVERVIEW AND CONNECTING THE CABLESThe cable(s) from the Control Head for each feature installed on the trolling motor is connected to an output device separately. Once thefeatures that may be installed are identified, follow the instructions below to ensure the cables are connected correctly.Built-In MEGA Down ImagingBuilt-In MEGA Down Imaging delivers nearly 3X the output of standard Side Imaging , and takes fishfinding into the megahertz frequency forthe very first time. The Minn Kota flagship families of trolling motors, including Ultrex, Ulterra, Terrova, and Fortrex, now include Built-In MEGADown Imaging sonar, the clearest imaging available only from Humminbird. With Humminbird MEGA imaging sonar built right into the trollingmotor, you now have a crystal clear view of what’s directly beneath the boat, without having to manage all of the cables that come with externaltransducers. The Built-In MEGA DI transducer is only available on new models equipped from the factory and cannot be added to an existingtrolling motor.The Built-in MEGA DI transducer will provide both MEGA Down Imaging and 2D CHIRP Digital Sonar to select Humminbird models. All Built-InMEGA DI trolling motors, will come “Apex and Solix Ready” out of the box. An adapter cable accessory (MKR-MDI-1 1852085 or MKR-MDI-21852086) is available for purchase that will allow the connection of any compatible Humminbird Helix fish finder. The MKR-MDI-1 is usedon Helix 8, 9, 10, 12 and 15 models. The MKR-MDI-2 is used for Humminbird Helix 7 models only. See the Built-In MEGA Down ImagingCompatibility chart online.NOTICE: You can only view Down Imaging with a MEGA DI or MEGA SI HELIX G2N, G3N or G4N Series model and a required adapter, orwith any SOLIX or APEX Series model. The built-in transducer cannot supply MEGA Imaging to Humminbird models that do not already havethe capability. If you have a G2/G2N, G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get 2D Dual Spectrum CHIRPSonar from the transducer. SOLIX G1 and HELIX G2 and G2N units need to be running the latest software update to view sonar from motorswith Built-In MEGA Imaging. You can get the latest version of software for your fish finder on humminbird.com. Built-In MEGA Imaging is notsupported by HELIX G1 models or other brands of fish finders.1a.b.Place the motor in the deployed position.i-PilotLinkThe Built-In MEGA Down Imaging connector from theControl Head is a 14 pin connector. Built-In MEGA DownImaging may be installed on its own, or in conjunctionwith an i-Pilot or i-Pilot Link system. It will never beinstalled with Universal Sonar. Locate and identify thecorrect connection for Built-in MEGA Down Imagingcable(s), at the base of the Control Head.Control HeadBuilt-in MEGADown ImagingCoilCordNOTICE: Built-in MEGA Down Imaging is always paired witheither i-Pilot or i-Pilot Link on Terrova, Ulterra and Ultrexmotors. It may be pre-installed on a Fortrex motor withoutother features that require external connections.MountFourteen PinConnectorBuilt-in MEGA DownImaging cable fromControl Head 2022 Johnson Outdoors Marine Electronics, Inc.NOTICE: Critical cable routing for 60" and 72" motors withi-Pilot Link and Built-in MEGA Down Imaging. AccessoryCables must exit the Coil Cord leaving three or more opencoils between where the cables exit and the motor base; asassembled by the factory. Routing the cables in any othermanner will not allow the motor to stow properly.minnkotamotors.com 13
BUILT-IN MEGA DOWN IMAGING2c.When installing with a Solix or Apex, the Built-In MEGADown Imaging cable can be plugged directly into theSolix/Apex fish finder. Plug the Built-in MEGA DownImaging cable into the corresponding connection onthe Solix/Apex fish finder.d.When installing with a Helix, first attach the AdapterCable and then plug the Adapter Cable into the Helixfish finder. The Adapter Cable will only have oneconnection that is keyed on the back of the Helix fishfinder. Plug the Adapter Cable into the only matchingkeyed connection.NOTICE: Check for compatibility or any required adaptercables online at minnkotamotors.com. The cable from theHumminbird Solix or Apex Fish FinderFourteen Pin ConnectorSolix/Apex FishFinder ConnectionLocking CollarPlug directly into Solix/Apex Fish FinderBuilt-In MEGA Down Imagingfrom Trolling Motortrolling motor can be extended with a 10’ Extension Cable#720081-1 or the 30’ Extension Cable #720081-2 found athumminbird.com.Humminbird Helix Fish FinderNOTICE: If any cables need to be routed, please followthe guidelines in the Routing Connection Cables section ofthese installation instructions.Fourteen Pin ConnectorLocking CollarKeyed Adapter Cablefor Helix Fish FinderBuilt-In MEGADown Imaging fromTrolling MotorAdapter Cable(Helix ONLY)AdapterCable KeyedConnectionPlug intoHelix FishFinderNOTICE: The connectors are keyed to preventreversed installation.14 minnkotamotors.com 2022 Johnson Outdoors Marine Electronics, Inc.
UNIVERSAL SONARUniversal SonarYour trolling motor may be pre-installed with a Universal Sonar transducer system. Universal Sonar is a 2D sonar transducer with atemperature sensor that is integrated into the lower unit of the trolling motor. It has an operating frequency of 83/200 kHz. Connectingthis transducer to a compatible fish finder gives you a 2D sonar view of what is happening directly below your trolling motor. Theintegrated design protects the transducer from underwater hazards, and prevents tangles and damage to the transducer cables.All Universal Sonar motors are equipped with an internal bonding wire, incorrect rigging will cause sonar interference and can damageyour trolling motor, electronics and other boat accessories. To minimize trolling motor interference, ensure that the fish finder andtrolling motor are powered by separate batteries. Please refer to the Battery & Wiring Installation and Motor Wiring Diagram sections ofthis manual for correct rigging instructions.The Universal Sonar Cables are shielded to minimize interference. To protect this shielding the cables should not be pulled tightagainst sharp angles or hard objects. If using cable ties, do not over-tighten. Any excess cable should be bundled in a loose loop of noless than 4” in diameter. In certain situations, air bubbles may adhere to the surface of the Universal Sonar transducer, and effect theperformance. If this happens simply wipe the surface of the transducer with your finger.NOTICE: Universal Sonar does not support imaging screens that require higher frequencies such as 455 kHz or 800 kHz(Down Imaging, Side Imaging, etc.). Down Imaging (DI) specific units are not compatible with Universal Sonar. See compatibilitychart for a list of compatible fish finders at minnkotamotors.com.The connector for Universal Sonar exits the trolling motor below the Control Head and consists of a 4-pin plug. An adapter cable(MKR-US2) that is sold separately is required for all installations. For a current list of compatible fish finders and the correct adapter cable,or more information on Universal Sonar, please visit minnkotamotors.com.1a.Place the motor in the deployed position.b.Locate the Universal Sonar, if equipped, at the baseof the Mount.c.Locate the Universal Sonar four pin connector atthe end of Universal Sonar Extension Cable. Theconnector is black with a stainless steel threadedlocking collar.Control HeadUniversalSonarCoil CordNOTICE: Your fish finder should be turned off until thisprocedure is complete.MountFour PinConnector 2022 Johnson Outdoors Marine Electronics, Inc.Universal SonarCable fromControl HeadNOTICE: If the cable length does not reach the desiredfish finder installation location, a 14.5’ extension cable isavailable (MKR-US2-11) (sold separately).minnkotamotors.com 15
i-PILOT LINK2NOTICE: The Universal Sonar Cable may not belong enough to reach the fish finder. If the cablelength does not reach the desired fish finderinstallation location, a 14.5’ extension cable isavailable to purchase. Minn Kota recommendsusing the MKR-US2-11.d.e.Take the Universal Sonar Extension Cable, if needed,and attach it to the Universal Sonar Cable exitingthe Control Head. Firmly push the plug together andtwist the locking collar until it is snug.Install the Universal Sonar Cable that exits theControl Head or the Universal Sonar ExtensionCable (if used) to the appropriate Universal SonarAdapter Cable. Install the Adapter Cable to your fishfinder. Refer to your fish finder manual for completeinstallation instructions.NOTICE: If any cables need to be routed, pleasefollow the guidelines in the Routing ConnectionCables section of these installation instructions.2dFour Pin ConnectorUniversal SonarCable fromControl HeadLocking CollarUniversal SonarExtension CableNOTICE: The connectors are keyed to preventreversed installation.2eLocking CollarUniversal Sonar Cable fromControl Head OR Universal SonarExtension CableUniversal SonarAdapter Cable tofish finderi-Pilot Linki-Pilot Link allows your Minn Kota trolling motor and Humminbird to communicate with each other to change the way you fish. i-Pilot Linkdelivers a large array of GPS capabilities including controlling speed, steering, Spot-Lock, and the ability to record and retrace paths onthe water, all at your fingertips. To learn more about the GPS capabilities available with your i-Pilot Link navigation system, please referto the Owner’s Manual by visiting minnkotamotors.com.The i-Pilot Link remote and controller make up the i-Pilot LinkNOTICE: The i-Pilot Link system needs an external wirednavigation system. The i-Pilot Link remote comes paired to theconnection. The i-Pilot system does not need an externalcontroller from the factory. The i-Pilot Link controller contains awired connection.very sensitive compass and is where all GPS satellite and i-PilotLink remote signals are received. The i-Pilot Link controller iscontained in the trolling motor Control Head and is connected to a fish finder from a connection cable that exits the Control Head.The Ethernet cable for the i-Pilot Link system has an 8-pin connector. The i-Pilot Link system can be connected directly to theHumminbird or to the Humminbird Ethernet Switch (optional). If you purchase an Ethernet Switch, install it using the instructionsincluded in the Ethernet Installation Guide. The Ethernet Extension Cable is optional for your installation. To purchase Ethernet switches,Ethernet cables, and extension cables, visit the website humminbird.com or call Humminbird Customer Service at 1-800-633-1468.Depending on the shape of the Ethernet port on your Humminbird fish finder, an additional ethernet adapter cable (Ethernet AdapterCable AS EC QDE #720074-1 for Helix fish finders) may be required for the installation. Refer to your fish finder operations manual or seethe i-Pilot Link Compatibility Chart on our website for a list of all compatible Humminbird Units and SC Cards.16 minnkotamotors.com 2022 Johnson Outdoors Marine Electronics, Inc.
i-PILOT LINK1a.b.Place the motor in the deployed position.i-PilotLinkThe i-Pilot Link connector from the Control Headis an 8-pin connector. Locate and identify thecorrect connection for i-Pilot Link, at the base ofthe Control Head.Built-in MEGADown Imaging orUniversal SonarNOTICE: i-Pilot Link will be paired with either Built-inMEGA Down Imaging or Universal Sonar on Ultrex,Ulterra or Terrova. i-Pilot Link is not a feature offered onFortrex motors.NOTICE: Paired with a Universal Sonar connector forillustration purposes. A Built-in MEGA Down Imagingconnector may be present instead.Control HeadCoilCordMountNOTICE: Critical cable routing for 60" and 72" motors with i-Pilot Link and Built-in MEGA Down Imaging. Accessory Cablesmust exit the Coil Cord leaving three or more open coils between where the cables exit and the motor base; as assembled by thefactory. Routing the cables in any other manner will not allow the motor to stow properly.2ITEM(S) NEEDED#12 x 1c.If necessary, to reach the installed fish finder, takethe i-Pilot Link Ethernet Cable (Item #12) and attachit to the i-Pilot Link cable exiting the Control Head.NOTICE: If any cables need to be routed, please followthe guidelines in the Routing Connection Cables sectionof these installation instructions.d.Install the i-Pilot Link Ethernet Cable directly intothe Humminbird fish finder, or refer to your fishfinder installation manual for complete installationinstructions. If an Adapter Cable is needed (EthernetAdapter Cable AS EC QDE for Helix fish finders),install it on the end of the i-Pilot Link Ethernet Cableand refer to your fish finder installation manual forcomplete installation instructions. 2022 Johnson Outdoors Marine Electronics, Inc.Eight-PinConnectori-Pilot Link EthernetLocking CollarExtension Cable ORi-Pilot Link EthernetEthernet Extension CableCable from Control HeadNOTICE: The connectors are keyed to preventreversed installation.minnkotamotors.com 17
INSTALLING THE PROPINSTALLING THE PROP1ITEM(S) NEEDED#17 x 1#15 x 1#16 x 1#14 x 1CAUTION1aArmature ShaftDrive PinDisconnect the motor from the battery before beginning anyprop work.a.Take the Drive Pin (Item #14) and slide it throughthe Hole in the Armature Shaft. Position the DrivePin horizontal by grasping the Armature Shaft androtating it with the Drive Pin in place.b.Align the Propeller (Item #17) so it is also horizontaland parallel with the Drive Pin. Slide the Propelleronto the Armature Shaft and Drive Pin until it isseated against the lower unit.c.Install the Prop Washer (Item #15) and the Prop Nut(Item #16) onto the end of the Armature Shaft.d.Holding the end of the Armature Shaft with a FlatBlade Screwdriver, tighten the Prop Nut with a 9/16"Open End Wrench.e.PropellerTighten the Prop Nut 1/4 turn past snug to25-35 in-lbs.CAUTIONDo not over tighten as this can damage the prop.18 minnko
You may obtain service by: calling Minn Kota at (800) 227-6433; returning your motor to the Minn Kota Factory Service Center; sending or taking your motor to any Minn Kota authorized service center. A list of authorized service centers is available on our website at minnkotamotors.com.
the deck of a Pathfinder 2400 TRS during the construction process. Trolling Motor/Wiring System Your Pathfinder 2200 TRS comes standard with a 24V trolling motor wiring system. A trolling motor mounting plate was built into the bow of your Pathfinder during the manufacturing process. To attach a trolling motor, please go to your nearest
8 MINN KOTA ACCESSORIES 9 File Downloads 10 References 11 Related Manuals INTRODUCTION THANK YOU Thank you for choosing Minn Kota. We believe that you should spend more time fishing and less time positioning your boat. . View accessories available for your trolling motor at minnkotamotors.com. TOOLS AND RESOURCES REQUIRED #3 Phillips Screw .
Trolling Motor Wiring & Installation Overview Installing a new trolling motor on your boat is a relatively simple process, but you need to have the right equipment and parts. Below is a list of the parts that are included with your trolling . The MotorGuide X3 series motors
Parts included Installation Manual 7 ActiveTarget transducer A B Sonar module mounting screws C M4 sonar module grounding screw D Sonar module E Ethernet cable F Power cable G M6x20 cap screw, 4x H Trolling motor shaft collar back (shaft mount) I Rubber collar inserts, 2x J Trolling motor shaft collar front (shaft mount) K M6 nut, 4x L Trolling motor bracket arm (shaft mount)
Direct students to spend some time visiting the Freshwater biome on our explorable globe, and use the information there to complete the questions and tasks below. 1. List examples of freshwater habitats and the species that can be found there Freshwater Habitats (target: 4 Freshwater Species (target: 5) Rivers, lakes, streams, canals, wetlands,
6108-02 Pigtail 8 way male 2 feet 6108-03 Pigtail 8 way male 3 feet 10 GA 2 WIRE TROLL MOTOR QUICK DISCONNECT Trolling Motor Quick Connect/Disconnect features 10 gauge heavy-duty connectors. It includes a plug and socket. It can be used on small boats and canoes for wiring a trolling motor that can be quickly connected and disconnected.
11 MINN KOTA ACCESSORIES 12 File Downloads 13 References 14 Related Manuals INTRODUCTION. THANK YOU . View accessories available for your trolling motor at minnkotamotors.com. HTTP://DELIVR.COM/2M9WS-QR TOOLS AND RESOURCES REQUIRED #3 and #2 Phillips Screw Driver Drill 9/32" Drill Bit
You lied to me, Pat. Danny's not allowed to leave. PAT All right, Mom, just hold on a sec. EXT. STREET - DAY DOLORES’S CAR BEGINS TO TURN AT A SMALL INTERSECTION. PAT (voice over) Let’s just talk about this. 6.
