2015 Infiniti QX60 Quick Reference Guide Infiniti USA

new s y s te m f e a t u r e sAround View Monitor (AVM) with Moving Object Detection (MOD)(if so equipped) With the ignition switch in the ON position, theAround View Monitor is activated by pressing theCAMERA button 1 , located on the control panel,or by moving the shift lever to the R (REVERSE)position. The control panel displays various viewsof the position of the vehicle.1 When the shift lever is in the P (PARK), N (NEUTRAL)or D (DRIVE) position and the CAMERA button 1 ispressed, the following views will display in order:Start from any Control Panel screenFront view & bird’s-eye viewPressPressPressFront view & front-side viewFront-wide viewPress41923535 15c Infiniti QX60 QRG 061815.indd 46/18/15 2:16 PM

When the shift lever is in the R (REVERSE) position and the CAMERA button 1 is pressed,the following views will display in order:Rear view & bird’s-eye viewRear view & front-side viewPressRear-wide viewPressPress The colored guide lines on the display screen indicate vehicle width and approximatedistances to objects with reference to the vehicle body line. Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m). There are some areas where the system will not show objects. When in the front or the rear view display, anobject below the bumper or on the ground maynot be viewed 2 . W hen in the bird’s-eye view, a tall object nearthe seam of the camera viewing areas 3will not appear in the monitor.2 The distance between objects viewed on theAVM differs from the actual distance. Objects in the bird’s-eye view will appear furtherthan the actual distance.351923535 15c Infiniti QX60 QRG 061815.indd 56/18/15 2:16 PM

new s y s te m f e a t u r e sMOVING OBJECT DETECTION (MOD) If the MOD system detects moving objectssurrounding the vehicle, a yellow frame 1 willbe displayed on the camera image and a chimewill sound.321 In the bird’s-eye view, a yellow frame is displayedon those camera images (front, rear, right, left)where moving objects are detected.4When the following are displayed: Blue MOD icon 2 ; the system is operative in this view. G ray MOD icon 3 ; the system is not operative in this view. N o MOD icon; the system is off.To temporarily turn the system on or off, touch the MOD key 4 .For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of yourOwner’s Manual.Warning Systems Switch (if so equipped)T he warning systems switch 1 will turn on and offthe systems enabled in the vehicle informationdisplay. The systems controlled by the warningsystems switch include: L ane Departure Warning (LDW) system B lind Spot Warning (BSW) system F orward Collision Warning (FCW) system hen the warning systems switch is turned off, theWindicator 2 on the switch is off. If thewarning systems switch is illuminated, the enabledsystems are on. The indicator will alsobe off if all of the warning systems are deactivatedusing the “Settings” menu.1234T o enable or disable these systems, perform thefollowing operation: P ress the5button 3 on the steeringwheel multiple times until you reach the“Settings” menu. P ress up or down on the button 4 to select the“Driver Assistance” 5 and “Driving Aids” 6menu items.6 Press the ENTER button 4 to change a menu item.For more information, refer to the “Instruments and controls (section 2)” ofyour Owner’s Manual.61923535 15c Infiniti QX60 QRG 061815.indd 66/18/15 2:16 PM

3rd Row Power Folding Seats The 3rd row seats can be folded flat for maximumcargo hauling or extra storage space. Before folding down the 3rd row seats:1 T he vehicle’s shift lever must be in the P (PARK)position or the N (NEUTRAL) position.MANUAL SEAT FOLD DOWN To fold the 3rd row seats flat:1. Pull the strap to release the head restraintforward 1 .2. S tow the 3rd row seat belts in the seat belt hooksfound in the cargo area 2 .3. P ull up on the latch located on the corner of eachseatback and lower the seatback forward over theseat base 3 .2POWER UNFOLDING SEAT (if so equipped) hen the ignition is in the OFF position, the powerWunfolding seats are always operational.3I f the ignition switch is in the ON position, thepower unfolding seats are only operationalwhen the shift lever is in the P (PARK) orN (NEUTRAL) position. To return the 3rd row seats to the upright position:1. Push and hold the switch. The seatback will rise up while holding the switch. A chime will sound once to indicate the start of the operation. warning chime will sound continuously if the seat is not in the fully upright or foldedAposition when the ignition switch is placed in the ON position.For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)” of yourOwner’s Manual.71923535 15c Infiniti QX60 QRG 061815.indd 76/18/15 2:16 PM

essent i al i n f o r m a t i o nTire Pressure Monitoring System (TPMS) with Tire Inflation Indicator A Tire Pressure Low – Add Air warning messagewill appear in the vehicle information display 1and the low tire pressure warning light 2 willilluminate when one or more tires are low inpressure and air is needed.1 T he tire pressures should be checked when thetires are cold. The tires are considered cold afterthe vehicle has been parked for 3 hours or moreor driven less than 1 mi (1.6 km) atmoderate speeds. When adding air to an under-inflated tire, the TPMSwith Tire Inflation Indicator provides visual andaudible signals to help you inflate the tire to therecommended COLD tire pressure.2To use the tire inflation indicator:1. Move the shift lever to the P (PARK) position and apply the parking brake.2. Place the ignition switch in the ON position. Do not start the engine.3. Add air to the under-inflated tire, and within a few seconds, the hazard warning lights willstart flashing.4. When the designated tire pressure is reached, the horn will beep once and the hazardwarning flashers will stop flashing.5. Repeat this procedure for any additional under-inflated tires. After tire pressures are adjusted, drive the vehicle at speeds above 16 mph (25 km/h).The Tire Pressure Low – Add Air warning message and low tire pressure warning lightwill extinguish. When the low tire pressure warning light flashes for approximately 1 minute and thenremains on, the TPMS is not functioning properly. Have the system checked by anINFINITI retailer. Tire pressure rises and falls depending on the heat caused by the vehicle’s operation andthe outside temperature. Low outside temperature can lower the temperature of the airinside the tire, which can cause a lower tire inflation pressure. This may cause the lowtire pressure warning light to illuminate. If the warning light illuminates, check the tirepressure in your tires. Check the tire pressure (including the spare tire) often and always prior to longdistance trips. The Tire and Loading Information label contains valuable information. Refer to the“Technical and consumer information (section 9)” in your Owner’s Manual for the locationof the Tire and Loading Information label.For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the“Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.81923535 15c Infiniti QX60 QRG 061815.indd 86/18/15 2:16 PM

Loose Fuel Cap A LOOSE FUEL CAP warning message will appear inthe vehicle information display 1 when thefuel-filler cap is not tightened correctly.1 To tighten, turn the cap clockwise until a single clickis heard. The warning message will extinguish when the vehicledetects the fuel-filler cap is properly tightened and thereset button 2 is pressed for about 1 second. If the cap is not properly tightened, the MalfunctionIndicator Lightmay illuminate.2For more information, refer to the “Instruments and controls (section 2)”and the “Pre-driving checks and adjustments (section 3)” of yourOwner’s Manual.Fuel-filler DoorThe fuel-filler door is located on the driver’s side ofthe vehicle. The fuel-filler door automatically locks or unlockswhen the driver’s door is locked or unlocked. To open the fuel-filler door, push the right side of thefuel-filler door and release.For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.Towing Your Vehicle All-Wheel Drive (AWD) Vehicle: An all-wheel drive vehicle must be towed with all wheels off the ground even if thevehicle is placed in the 2WD mode. For proper towing and to avoid accidental damage to your vehicle, INFINITIrecommends that a service operator tow your vehicle after carefully reading the Owner’sManual precautions.For more information, refer to the “In case of emergency (section 6)” of your Owner’s Manual.Accessing the Front Cup Holders To open the cup holders, push the lid 1 downand release.1For more information, refer to the “Instruments and controls (section 2)”of your Owner’s Manual.91923535 15c Infiniti QX60 QRG 061815.indd 96/18/15 2:16 PM

essent i al i n f o r m a t i o nFront Arm Rest/Center Console Storage BoxTo access the top storage bin, pull up on the driver’sside lever 1 .To access the bottom storage bin, pull up on thepassenger’s side lever 2 .21For more information, refer to the “Instruments and controls (section 2)”of your Owner’s Manual.Clock Set/AdjustmentDIGITAL CLOCK ADJUSTMENT To adjust the time and the appearance of the clock on the display:1. Press the SETTING button on the control panel.2. T ouch the Others key.3. Touch the Clock key. The following settings can be adjusted: O n-screen Clock: The clock in the upper rightcorner of the display can be turned ON or OFF. C lock Format (24h): The clock can be set to 12 hours or 24 hours. Offset (hour): The time can be adjusted by increasing or decreasing per hour. O ffset (min): The time can be adjusted by increasing or decreasing per minute. D aylight Savings Time: The application of daylight savings time can be turned ON or OFF. T ime Zone: Adjust the time zone. Choose a time zone from the available list. Press theBACK button to return to the previous screen.For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of yourOwner’s Manual.101923535 15c Infiniti QX60 QRG 061815.indd 106/18/15 2:16 PM

f i rst dr i v e f e a t u r e sINFINITI Intelligent Key SystemThe INFINITI Intelligent Key system allows you to lock or unlock yourvehicle, open your liftgate and remotely start the engine. It is important tomake sure the Intelligent Key is with you (that is, in your pocket or purse).2REMOTE ENGINE START* (if so equipped) The remote engine start system must be enabled in the vehiclesettings within the vehicle information display.14T he remote engine start operating range is approximately 200 ft(60 m) from the vehicle. The effective operating range may beshorter due to environmental conditions or obstacles between youand the vehicle.56 For the remote engine start to function, the vehicle must be inthe P (PARK) position with the ignition off and all the doorsclosed and locked.To start your vehicle remotely:1. Press thebutton 1 .2. W ithin 5 seconds, press and hold the remote engine startfor at least 2 seconds.button 2 The engine will start, and the parking lights will turn on. utomatic climate control will begin heating or cooling the vehicle depending on the lastAused mode. The engine will run for 10 minutes and then turn off. Repeat steps 1 and 2 to extend the time for an additional 10-minute period. After two remote starts, the ignition switch must be cycled before the remote start can beused again.To start driving, depress the brake pedal and push the ignition switch START/STOP button.LOCKING AND UNLOCKING THE VEHICLE The lock and unlock operating range of theIntelligent Key is within 31.5 in (80 cm) fromeach request switch.To lock the vehicle, push either door handlerequest switch 3 once or press the button 1on the key fob.To unlock the vehicle, perform one of the following procedures:3 Push either door handle request switch 3 once; the corresponding door will unlock.Push the door handle request switch 3 again within 30 seconds; all other doorswill unlock, or P ress the button 4 on the key fob to unlock the driver’s side door. Press the4 again; all other doors will unlock.button*Laws in some communities may restrict the use of remote starters. Check local regulations before using this feature.111923535 15c Infiniti QX60 QRG 061815.indd 116/18/15 2:16 PM

f i rst dr i v e f e a t u r e sLIFTGATE RELEASETo open the rear liftgate, press thebutton 5 for longer than 1 second.To close the rear liftgate, press thebutton 5 again for longer than 1 second.PANIC ALARM The Intelligent Key can also be used to activate the panic alarm by pressing and holdingthe button 6 for more than 1 second. Once activated, the panic alarm and headlightswill stay on for a period of time.INTELLIGENT KEY BATTERY DISCHARGE If the battery of the Intelligent Key is dischargedor environmental conditions interfere with theIntelligent Key operation, start the engine accordingto the following procedure:1. Move the shift lever to the P (PARK) position.2. Firmly apply the foot brake.3. Touch the ignition switch with the Intelligent Key,and a chime will sound.4. Within 10 seconds after the chime sounds, push the ignition switch while depressingthe brake pedal and the engine will start.For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” andthe “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.Power Liftgate1 When the liftgate is closed and locked, the liftgatewill open automatically by: Pushing the power liftgate switch 1 on theinstrument panel. P ushing the liftgate opener switch 2 ; theliftgate must be unlocked, or you must have theIntelligent Key with you (that is, in yourpocket or purse). Pressing thebutton 3 on the INFINITIIntelligent Key for more than 1 second.42 The power liftgate operation can be turned onor off by the power liftgate main switch 4 on theinstrument panel. When the power liftgate main switch is pushed tothe OFF position, power operation is not availableusing the power liftgate switch on the liftgate 5or the liftgate opener switch 2 .53For more information, refer to the “Pre-driving checks and adjustments(section 3)” of your Owner’s Manual.121923535 15c Infiniti QX60 QRG 061815.indd 126/18/15 2:16 PM

Power Seat Adjustments To slide the seat forward or backward, push theswitch 1 forward or backward. To recline the seatback, push theforward or backward.switch 21SEAT LIFTER23 To raise or lower the front portion or height of theseat, push the front or back end of theswitch 1 up or down.POWER LUMBAR SUPPORT (if so equipped for driver’s seat)To adjust the seat lumbar support, push the front or back end of theswitch 3 .For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)” of yourOwner’s Manual.2nd Row SeatsTo slide the seat forward or backward, pull thecenter of the bar 1 up and hold it while you slidethe seat forward or backward to the desiredposition. Release the bar to lock the seatin position.To recline the seatback, pull up on the recline handle2 and lean back. To bring the seatback forward, pullthe lever up and lean your body forward. Release thelever to lock the seatback in position.321MULTI-MODE/CHILD SEAT ACCESS FUNCTIONThis feature is not available on the driver’s side of the 2nd row seat.If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd rowcan be accessed without removing the child safety seat.To access the 3rd row from outside the vehicle, lift up on the seatback release lever 3 .EZ ENTRY MODE To enter the 3rd row from outside the vehicle, lift fully up on the seatback lever 3 . This willrelease the back of the seat and fold up the seat cushion. For access to the rear seat, slide the entire seat forward by pushing on the upperseatback area. To return the seat to a locked position, push the upper seatback rearward until theseatback and track are locked. Push the seat cushion down. Locking the seatback will alsolock the track.For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)”of your Owner’s Manual.131923535 15c Infiniti QX60 QRG 061815.indd 136/18/15 2:16 PM

f i rst dr i v e f e a t u r e s3RD Row Manual Reclining SeatbackTo recline the seatback, pull up on the latch 1located on the outside corner of each seatback.Lean back until the desired angle is obtained.To bring the seatback forward again, pull up on thelatch 1 and move your body forward. Theseatback will move forward.1For more information, refer to the “Safety — Seats, seat belts andsupplemental restraint system (section 1)” of your Owner’s Manual.Automatic Drive Positioner (if so equipped) Two positions for the driver’s seat, steering columnand outside mirrors can be stored in the automaticdrive positioner 1 memory.Follow this procedure to set the memory positions:1 Push the ignition switch to the ON or ACCposition. (The vehicle should be stopped whilesetting the memory.) Adjust the driver’s seat, steering column andoutside mirrors to the desired positions using theadjusting switches for each feature. Push the SET switch and within 5 seconds push the memory switch (1 or 2). The indicator light for the memory switch you select will illuminate for approximately 5seconds and a chime will sound when the memory is stored. The driver’s seat, steering column and outside mirror positions are now set toyour preferences. These memorized positions can also be linked to your INFINITI Intelligent Key.For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.Outside Mirror Control Switch To select the right or left side mirror, move thecontrol switch 1 right or left. Adjust each mirror to the desired position using thecontrol switch 2 . To fold the outside rearview mirrors, pushthe control switch 3 to theposition. To unfoldthe outside rearview mirrors, push the controlswitch 3 to theposition.123141923535 15c Infiniti QX60 QRG 061815.indd 146/18/15 2:16 PM

REVERSE TILT-DOWN FEATURE (if so equipped) The reverse tilt-down feature will turn both outside mirror surfaces downward to providebetter rear vi

display. The systems controlled by the warning systems switch include: Lane Departure Warning (LDW) system Blind Spot Warning (BSW) system Forward Collision Warning (FCW) system When the warning systems switch is turned off, the indicator 2 on the switch is off. If the warning systems switch is illuminated, the enabled systems are on.