Visit PassLeader And Full Version NS0-506 Exam Dumps
Free VCE and PDF Exam Dumps from PassLeader Vendor: Network Appliance Exam Code: NS0-506Exam Name: NetApp Certified Implementation Engineer -- SAN, ONTAP Question 251 – Question 300Visit PassLeader and Download Full Version NS0-506 Exam DumpsQUESTION 251What communication link is necessary in order to establish cluster peer relations between twoclusters?A. The cluster interface on each node must be able to communicate with the intracluster interface oneach node in the peer cluster.B. The cluster interface on each node must be able to communicate with the node-mgmt interface oneach node in the peer cluster.C. The intracluster interface on each node must be able to communicate with the intracluster interfaceon each node in the peer cluster.D. The intercluster interface on each node must be able to communicate with the intercluster interfaceon each node in the peer cluster.Answer: DQUESTION 252A volume named volume217 resides on an aggregate named node7 aggr12 and is mounted in thenamespace at junction /source/april/test217. A file named revert.cpp is at the root of volume217. Avolume move operation relocates volume217 to node3 aggr3. What is the fully qualified path torevert.cpp after the move is complete?A.B.C.D.E./node3 aggr3/source/april/test217/revert.cpp/node3 olume217/revert.cppAnswer: CQUESTION 253How many cluster switch(es) are required for a NetApp cluster?A.B.C.D.1246NS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderAnswer: BQUESTION 254A FAS6280 running ONTAP 8.0.2P1 has a 32-bit root aggregate. After upgrading to Data ONTAP8.1, what is the status of the root aggregate?A.B.C.D.The root aggregate remains 32-bit.The root aggregate converts from 32 to 64-bit in place.The root aggregate auto-migrates to a new 64-bit aggregate.The upgrade fails with a message to create a new 64-bit aggregate before upgrade.Answer: AQUESTION 255Which four steps must an administrator take before establishing a CIFS share? (Choose four.)A.B.C.D.E.F.G.create a volumeconfigure a share policy with the desired valuesconfigure an export policyconfigure name mappingenable Active Directory routingmount a volume within the Vserver namespaceset a default share policyAnswer: ACDFQUESTION 256Volumes can be moved from 32-bit aggregates to which two types of aggregates? (Choose two.)A.B.C.D.32-bit aggregates64-bit aggregatesflex aggregatestraditional aggregatesAnswer: ABQUESTION 257An administrator for a virtual server named abc17 mounts a new volume named vola at junctionnamed /accounting/teama and creates two directories at the root of the new volume named 2011and 2011/june. He also copies a file called report.doc into the directory named june. An NFS clientmounts to the root of the namespace. What is the fully qualified path to .docAnswer: BQUESTION 258What three statements are true about LIF failover? (Choose three.)NS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderA.B.C.D.E.F.A data Ethernet LIF fails over when the cluster is in quorum.A cluster management Ethernet LIF fails over when a port is down.A cluster management Ethernet LIF will never automatically revert back to its home port.A data Ethernet LIF will not revert back by default to its home port.A node management Ethernet LIF fails over when a port is down.A node management Ethernet LIF will never automatically revert back to its home port.Answer: ABDQUESTION 259What is the maximum number of nodes a NAS cluster can have?A.B.C.D.E.F.G.1248162432Answer: FQUESTION 260Which statement is true about converting an aggregate from 32-bit to 64-bit?A.B.C.D.It is supported when adding disks.It is supported without adding disks.It is supported in maintenance mode.It is not supported. You must use VSM to migrate 32-bit to 64-bit.Answer: AQUESTION 261Which statement is correct regarding virtual machine alignment on VMware ESX?A. Alignment issues can occur on any protocol including FCP, iSCSI, FCoE, and NFS.B. Windows RDM LUNs on NetApp suffer from alignment problems because they are accesseddirectly by VMs.C. A VMIS I UN with a LUN type of VMware, will always have properly aligned VMs.D. msinfo32 or mbrscan can be run for the ESX service console to check for proper alignment of VMs.Answer: AQUESTION 262When you create a LIF you associate it with which two components? (Choose two.)A.B.C.D.a vserveran aggregatea LUNa volumeNS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderE. a controller's Ethernet or FC portAnswer: AEQUESTION 263Which command allows you to display the current zoning information for a Brocade switch?A.B.C.D.switchshowdefzone --showcfgshowcfgzoneshowAnswer: n/brocade/manuals/2.6/53 0000202 02.pdf (page 21, firstpara)QUESTION 264The Space Guarantee option needs to be set to ensure a volume cannot be affected by othervolumes storage usage.A.B.C.D.NoneVolumeReservedEnabledAnswer: BQUESTION 265Data ONTAP supports which FCoE achedcore-edgeAnswer: DQUESTION 266During a cluster failover operation (CFO), paths on the surviving node of the HA pair will show as:A.B.C.D.Non OptimizedIndirectDirectAsymmetricAnswer: CQUESTION 267A customer wants to move from a file based storage solution (NAS) to a block based solution iSCSl(SAN). Which components do they need in order to implement a NetApp SAN based solution forISCSI? (Choose three.)NS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderA.B.C.D.E.F.G.FCP software license on NetApp storage controllersEthernet SwitchesFC SwitchesISCSI software license on NetApp storage controllersFCoE HBA'sFC HBA'sNIC's on both Host and NetApp storage controllersAnswer: BDGQUESTION 268SAN LIFs provide which two functions for the vservers? (Choose two)A.B.C.D.E.SAN traffic can utilize the management LIF's on the controllersOne LIF can be used for both iSCSI and FC trafficMigrate when required for redundancyProvide connectivity to the host system for MPIO with ALUA path selectioniSCSI and FC LIFs can utilize the same ports on a controller's UTAAnswer: AEQUESTION 269What happens when a node loses SAN protocol quorum? (Choose two.)A.B.C.D.The node's HA partner initiates a takeover of the out of quorum node.The node continues serving data via SAN protocols, but only over direct paths.The node stops serving data via SAN protocols completely until it is rebooted.The node stops serving data via SAN protocols until the node quorum reinitialize command is executed.Answer: ABQUESTION 270A storage administrator notices the FCoE traffic is only given 30% of the bandwidth allocation whena 10-GbE FCoE path becomes fully saturated. How can a storage administrator check thebandwidth allocation for a particular FCoE port in Data ONTAP Cluster Mode?A.B.C.D.There is no problem. This is the normal allocation and it cannot be changed.The problem cannot be detected on the storage. Check the switch.Use the dcb show command at the nodeshell.Use the dcb show command at the clustershell.Answer: CQUESTION 271In Data ONTAP 8.1.1, before a LUN can be created a must already be present. (Choosethree.)A. igroupB. VserverC. traditional volumeNS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderD. flexible volumeE. aggregateAnswer: BDEQUESTION 272When adding nodes to a cluster in Data ONTAP 8.1.1 Cluster Mode, you must observe which twolimitations? (Choose two.)A.B.C.D.E.All nodes in a cluster must have the same number of Fibre Channel target ports.All nodes in a cluster must have the same amount of storage capacity.All nodes in a cluster must have redundant connections to the cluster networkAll nodes in a cluster must be of the same storage controller model.Nodes may only be added in HA pairs.Answer: CEQUESTION 273Which type of VLAN protects against media access control (MAC) spoofing?A.B.C.D.StaticDynamicNPIVVSANAnswer: BQUESTION 274A solution is setup with a Volume Guarantee volume, LUN reservation off, Fractional Reserve 0%, Snap Reserve 0%, auto delete volume, auto grow on, try first autosize. Which ofthese choices best describes the use of these settings for our Space Policy?A. when you want to set aside overwrite reserve space for the LUNs so that writes never fail with thepresence of SnapshotsB. when you want to use thinly provisioned LUNs to overcommit the volume and increase storage efficiencyC. when you want Data ONTAP to start deleting Snapshots to recover space from the volume beforegrowing the volumeD. when you want to guarantee space for Snapshots by letting the volume autogrowAnswer: managing-lun-space-requirements-with- netapp-storage/QUESTION 275If you change the setting for the option cifs.neg buf size, you need to terminate CIFS on thestorage system and do a restart for the changes to take effect.A. TrueB. FalseAnswer: ANS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderQUESTION 276Which command would you use to verify that the iSCSI service is running?A.B.C.D.license add iSCSIiscsi serviceiscsi statusiscsi protocolAnswer: CQUESTION 277What two possible outcomes could occur when a logical interface (LIF) serving a SAN protocol fails?(Choose two.)A.B.C.D.E.The storage controller sends an ALUA path status update to the host.The host sends an ALUA path status update to the storage controller.The path shows as Non-Optimized.The host shifts traffic to any remaining direct paths.The host shifts traffic to indirect paths if there are no direct paths remaining.Answer: CDQUESTION 278To provide a complete connectivity and cabling plan prior to FC SAN deployment, which statementtrue?A.B.C.D.VM administrators must be consulted to ensure optimum ESXi host loading.Once LUN mapping planning is complete, the job is done.Final FC storage architecture is the sole requirement.Switch and controller management network connectivity must be verified.Answer: DQUESTION 279When verifying a customer's environment, which components should you document?A.B.C.D.host CPU speed, memory, bus slots, FC switch ports used and unusedhost bus slots, HBA's, FC switch ports used and unusedhost bus slots, HBA's, memory, FC switch ports used and unused, USB connectionshost CPU speed, HBA's, memory, FC switch ports used and unusedAnswer: AQUESTION 280Which utility on Linux can be used to collect information about firmware and driver versions for aQlogic QLAxxx/QLExxxx HBA?A.B.C.D.SANutilEMutilcfgadminSANsurferNS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderE. hiBAnywareAnswer: DQUESTION 281How does a host determine the new state of an ALUA path?A.B.C.D.It sends a path status API call to the cluster management Interface.It receives a LOGICAL UNIT NOT READY response from that path.It sends a SCSI INQUIRY command.It receives an indirect path notification from the attached FC or Ethernet switch.Answer: age content&id 3012899&pmv print&impressions falseQUESTION 282For controller-specific information on hardware deployment details such as rack power and cablemanagement, where can you find information?A.B.C.D.Library guides on netapp.comInteroperability Matrix Toolsupport.netapp.com Product DocumentationNOW site Support Offerings DocumentationAnswer: AQUESTION 283Which two technologies are required for FCoE? (Choose two.)A.B.C.D.E.Lossless EthernetFC-IPSiSNSDCBDHCPAnswer: ADQUESTION 284When laying out LIFs in Vservers, which three devices WWPIMs should you identify? (Choosethree.)A.B.C.D.E.F.host HBA's for mapping to storage controllersFC switches for zoningstorage controllershost applications' for accessing storage controllers and LUN'sstorage controller's software initiatorstorage controller's NIC'sAnswer: ABCQUESTION 285NS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderIn the cabinet diagram shown,what additional information should be included to make it morecomplete?A.B.C.D.storage controller rack placementstorage port connectivityswitch connectivitystorage shelf connectivityAnswer: DQUESTION 286What are the steps required to set the Domain ID on a Brocade switch? Choose one:A. cfgswitch : switchenableNS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderB.C.D.E.F.switchshow : cfgshow : switchenableconfigure : rebootswitchdisable : configure : switchenableconfigure : switchshow : rebootswitchdisable : configure : resetAnswer: ments/html product manuals/ENCRYPTION QSG/wwhelp/wwhimpl/common/html/wwhelp.htm#context 53-100111801&file EncryptSwitch QSG 01 working.1.21.htmlQUESTION 287When running Data ONTAP in Cluster-Mode, which topology allows for guaranteed maximumnetwork performance for iSCSI?A.B.C.D.Direct connectiSCSI access listsinitiatorAsymmetricAnswer: AExplanation:http://www.cosonok.com/2012 02 01 archive.html(2.9 Plan iSCSI configuration)QUESTION 288What is the name of the SAN replicated database ring in Data ONTAP Cluster-Mode 8.1 and later?A.B.C.D.E.None of the above. The SAN protocol does not have a database replication ringLUN Configuration and Operation Manager daemon (LCOMd)Block Configuration and Operation Manager daemon (BCOMd)SAN Configuration and Operation Manager daemon (SCOMd)FC Configuration and Operation Manager daemon (FCOMd)Answer: CQUESTION 289The cluster administrator determines the cluster management LIF is down. What is another methodto access the cluster?A.B.C.D.Login via one of the FC LIFs.Login via one of the data LIFs.Login via one of the intercluster LIFs.Login via one of the node management LIFs.Answer: DQUESTION 290Which is NOT a prerequisite for serving data using the iSCSI protocol in Data ONTAP running inCluster Mode?A. The Vserver must have an iSCSI service configured and running.NS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderB. The Vserver must have logical interfaces (LIFs) configured to serve data via the iSCSI protocol.C. The node containing the data to be served via ISCSI must have an MA partner with a partnerInterface configured.D. The cluster must have an iSCSI license.Answer: CQUESTION 291To ensure path redundancy and load balancing you must configure each host for .A.B.C.D.E.SnapDrive for Unixthin provisioningconsistent igroup usagehost multipathing specific to its OS type and version leveljumbo framesAnswer: DQUESTION 292Which is NOT a reason to zone your fabric?A.B.C.D.increase network securityreduce cross talk between portslimit the type of initiators usedlimit the available pathsAnswer: DQUESTION 293Which storage system command should you use to group initiators to allow them to be mapped tological unit numbers (LUNs)?A.B.C.D.igroup createigroup mapigroup allowigroup groupAnswer: AQUESTION 294A Windows 20O8 iSCSI initiator is NOT able to switch between different paths when a pathbecomes unavailable. What is a likely cause?A.B.C.D.An iSCSI path must have jumbo frames enabled to allow Multipathing.The iSCSI protocol does NOT allow switching between paths, although you can trunk oaths together.An iSCSI igroup does NOT have the initiator's IQN.The Multipath I/O function is NOT installed.Answer: DQUESTION 295The storage administrator has verified SAN fabric connectivity between the initiator and target otherNS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderLUNs are visible. However, one LUN still is NOT visible to the initiator. What do you need to do todetermine the cause?A.B.C.D.verify the target HBA is enabledverify the LUN is properly mapped to a correct igroupverify the initiator HBA is enabledverify the LUN has been configured to the appropriate OS typeAnswer: BQUESTION 296Which command do you use to verify the FC devices that have logged into a Cisco Nexus switch?A.B.C.D.flogi database showshow flogi databaseshow login databaselogin database showAnswer: BQUESTION 297For what do you Use a Cisco Virtual SAN?A.B.C.D.Virtual SAN is a way to divide a fabric logically.Virtual SAN is a role-based access control mechanism.Virtual SAN is a way to group physical switches.Cisco does not use a concept of a Virtual SAN.Answer: AQUESTION 298What will configuring the FCP service for a Vserver do?A.B.C.D.It will disable any NAS protocols for that Vserver.It will create a target World Wide Node Name for the Vserver.It will log the storage controllers' target adapters into the attached Fibre Channel fabric.It will allow igroups to be created on the Vserver.Answer: MP1196817/html/vserver/fcp/create.htmlQUESTION 299When a volume containing LUNs is moving from a source node to a destination node using the volcommand, which two statement are true? (Choose two.)A.As soon as the vol move is initiated, the host accessing LUN data is instructed to start sending data to thedestination node.B. Path states do NOT change until all the data has been moved to the destination node.C. The source node will suspend I/O to the host accessing data in the moving volume if there is too much traffic.D. By default, the cut-over from the source to the destination node will be re-attempted several times.NS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeaderE.By default, the original data is kept as a backup on the source node for 24 hours.Answer: ADQUESTION 300In order to ensure a host can pick the Direct path to a LUN, where must a node's ALUA option bechanged to TRUE?A.B.C.D.the ALUA option cannot be changedon the portseton the igroupon the LUNAnswer: CVisit PassLeader and Download Full Version NS0-506 Exam DumpsNS0-506 Exam DumpsNS0-506 Exam QuestionsNS0-506 VCE Dumps NS0-506 PDF Dumpshttp://www.passleader.com/ns0-506.html
Free VCE and PDF Exam Dumps from PassLeader . Visit PassLeader and Download Full Version NS0-506 Exam Dumps QUESTION 251 What communication link is necessary in order to establish cluster peer relations between two clusters? A. The cluster interface on each node must be able to communicate with the intracluster interface on
Free VCE and PDF Exam Dumps from PassLeader . Visit PassLeader and Download Full Version 70-473 Exam Dumps QUESTION 21 A solution for the data warehouse system must be created to provide disaster recovery between SQL03 and an Azure virtual machine named SQL04. You need to tell the research project leaders
Prime VCE and PDF Exam Dumps from PassLeader . Visit PassLeader and Download Full Version 70-341 Exam Dumps Case Study 6: Trey Research (QUESTION 121 QUESTION 131) Overview Trey Research is a pharmaceutical company that has 10,000 users. Most of the users work remotely, including the users in the finance department. The finance department .
New VCE and PDF Exam Dumps from PassLeader . Visit PassLeader and Download Full Version DP-100 Exam Dumps NEW QUESTION 1 You are conducting feature engineering to prepuce data for further analysis. The data includes seasonal patterns on inventory requirements. You need to select the appropriate method to conduct
Free VCE and PDF Exam Dumps from PassLeader 70-410 Exam Dumps 70-410 Exam Questions 70-410 PDF Dumps 70-410 VCE Dumps http://www.passleader.com/70-410.html
Visit PassLeader and Download Full Version 70-332 Exam Dumps QUESTION 61 An organization has a SharePoint environment that contains the following three farms: - Farm1 has a Search service application that is configured to crawl all SharePoint sites in Farm1. - Farm2 has a Search service application that
Prime VCE and PDF Exam Dumps from PassLeader 70-331 Exam Dumps 70-331 Exam Questions 70-331 PDF Dumps 70-331 VCE Dum
Free VCE and PDF Exam Dumps from PassLeader 70-486 Exam Dumps 70-486 Exam Questions 70-486 PDF Dumps 70-486 VCE Dumps http://www.passleader.com/70-486.html
Anatomy Fig 1. Upper limb venous anatomy [1] Vessel Selection Right arm preferable to left (as the catheter is more likely to advance into the correct vessel), vessel selection in order: 1. Basilic 2. Brachial 3. Cephalic Pre-procedure Patient information and consent Purpose of procedure, risks, benefits, alternatives. Line care: Consider using local patient information leaflet as available .
