Operating And Monitoring Systems Panel PC SERIES 400 Device Platform .
Operating and Monitoring Systems Panel PC SERIES 400 Device platform MANTA PM ET-477-LX Panel PC for panel mounting, 24" display, full HD 1920 x 1080 Zone 1, 2, 21, 22, can be installed in hazardous areas without additional enclosure Optional resistive glass or foil touch screen Data is transmitted via Ethernet as 1000Base- LX via single mode fibre optic up to 10 km. WebCode EAGLEMANTAPMA The PM ET- 477- LX operating devices are explosion- protected The Panel PCs for panel mounting in Zones 1, 2, 21, 22 and Division 2. Their brilliant 24" widescreen displays have a resolution of 1920 x 1080 pixels (format 16:9). Configuration options include touchscreen, memory sizes and SSDs. Data is transmitted via Ethernet as 1000Base- LX via single mode fibre optic up to 10 km. Technical Data General Series EAGLE and MANTA Panel PCs / Thin Clients panel- mount devices Product description 24" Panel PC Technology Panel PC HMI type Panel- mount device Explosion Protection Application range (zones) 1 2 21 22 Application range (divisions) Class I, Division 2 Scope Australia (RCM), Canada (CEC), China (CCC / CNEx), EU (CE / ATEX), India (PESO), International (IECEx), Korea (KCS), Russia (EAC), USA (NEC) Scope EU (CE / ATEX), International (IECEx), Russia (EAC), USA (NEC), Canada (CEC), India (PESO), Korea (KCS), China (CCC / CNEx), Australia (RCM), Scope Australia (RCM) Canada (CEC) China (CCC / CNEx) EU (CE / ATEX) India (PESO) International (IECEx) Korea (KCS) Russia (EAC) USA (NEC) IECEx certification IECEx BVS 11.0075X ATEX certification BVS 11 ATEX E 102 X EAC certification TC RU C-DE.HA91.B.00166/20 NEC certification 70011698 CEC certification 70011698 CNEX certification CNEx21.1938X 2022-11-14 R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 50829 KÖLN 1/5 V 0.20 EN Tel. 49 221 768 06 1200 49 221 768 06 4200 Email: sales.dehm@r-stahl.com r-stahl.com
Operating and Monitoring Systems Panel PC SERIES 400 Device platform MANTA PM ET-477-LX Explosion Protection KCS certification 12-GA4BO-0617X KCC certification only devices with foil touchscreen depending on installed components PESO certification A/P/HQ/TN/104/5768 (P438244) IECEx gas explosion protection Ex eb q [ia op is Ga] IIC T4 Gb IECEx dust explosion protection Ex tb IIIC [ia op is Da] IP65 T110 C Db ATEX gas explosion protection Ex db eb ia ib mb [ia ib] IIC T4 Gb ATEX dust explosion protection II 2(1) D Ex tb IIIC [ia op is Da] IP65 T110 C Db EAC gas explosion protection 1Ex e q [ia op is Ga] IIC T4 Gb X EAC dust explosion protection Ex tb IIIC [ia op is Da] T110 C Db X NEC explosion protection Class I, Zone 1 AEx e q [ia] IIC T4 Gb CEC gas explosion protection Ex e q [ia] IIC T4 Gb Class I, Division 2 CNEX gas explosion protection Ex e q [ia op is Ga] IIC T4 Gb CNEX dust explosion protection Ex tD [iaD op is] A21 IP65 T110 C KCS explosion protection Ex e q IIC T4 Ex tb IIIC IP64 T110 C Ex ia IIC T4 Ex ia IIIB T110 C PESO explosion protection Ex eb q [ia op is Ga] IIC T4 Gb Electrical Data Power supply 24 VDC or 230 VAC Rated operational voltage DC 24 V Voltage range DC 20 – 30 V Rated operational voltage AC 230 V Voltage range AC 100 – 240 V Frequency range 50 – 60 Hz Power consumption DC 3A Power consumption AC 1 1A Protection fuse DC 5 AT Protection fuse AC 5 AT Rated operational power typically 50 W / max. 150 W (typically 170 BTU / max. 510 BTU) Processor type AMD GX- 222GC Processor details 2.2 GHz, Dual Core, 10W TDP RAM 4 GB Data memory 64 GB MLC 128 GB MLC Graphics controller integrated AMD Radeon R5E graphics Memory technology SSD solid state flash drive Operating system Windows 10 IoT Enterprise (64 bit) (included in standard delivery) Windows 10 IoT Enterprise (32 bit) (optional on USB stick) Language support via Windows operating system Ethernet / Data 1x 1000Base- LX (Ex op is) 1x 10/ 100/ 1000Base- TX (Ex e) Data cable LX: 9/ 125 μm FO cable TX: CAT7 installation cable AWG23 2022-11-14 R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 50829 KÖLN 2/5 V 0.20 EN Tel. 49 221 768 06 1200 49 221 768 06 4200 Email: sales.dehm@r-stahl.com r-stahl.com
Operating and Monitoring Systems Panel PC SERIES 400 Device platform MANTA PM ET-477-LX Electrical Data Data cable length LX: max. 10 km TX: max. 100 m Data cable notice Minimum requirement CAT5e, recommended CAT7 Interface medium LX: single mode optical cable TX: CAT7 data transmission Interface USB 2 x USB (Ex ia) 1 x USB (Ex e) 2 x USB (Ex ia) (keyboard, pointing device) Interface serial 1 x RS- 232 (Ex e) Interface reader via USB or RS- 232 Interface reader note RFID reader, support of the following standards: MIFARE Classic, DESFire, DESFire EV1, LEGIC prime and advant, NFC, INSIDE Secure, Sony FeliCa, ISO 14443A & 15693 1D/ 2D Barcode scanner: support of all common 1D/ 2D codes, wired or Bluetooth Interface audio 1 x Audio line out (Ex e) WLAN optional via USB Connection compartment Power supply direct in integrated Ex e terminal box Connections via screw terminals, green Voltage output 12 V DC, max. 500 mA Wiring flexible cable up to 2.5 mm² (AWG14) fixed cable up to 4 mm² (AWG12) Plug version FO LC duplex socket Max. input voltage Um 250 VAC Real- time clock Yes Real- time clock data buffer Lithium battery and capacitor buffered, maintenance- free Battery buffered 5 years Capacitor buffered at least 4 days Display Display version TFT Color display Display version 2 16.7 million colours Display size inch 24 Display size centimetres 61 Display resolution 1920 x 1080, 1680 x 1080, 1280 x 1024 Total pixels 1920 x 1080 Display dimensions 16:9 Display brightness 300 cd/ m² Display contrast 1000:1 Display viewing angle horizontal 178 Display viewing angle vertical 170 Touchscreen optional, resistive glass or foil touchscreen Touchscreen technology 5- wire glass or foil touch Touchscreen activation Foil touch: low activation pressure (0.1 to max. 1 N) Glass touch: medium activation pressure (1.8 to max. 2.5 N) Touchscreen input method Finger, gloved finger or stylus Touchscreen durability Foil touch: polyester foil is easily scratched, with high pressure the spacer dots could be damaged Glass touch: Satisfactory, but glass is not hardened, with high pressure the spacer dots could be damaged 2022-11-14 R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 50829 KÖLN 3/5 V 0.20 EN Tel. 49 221 768 06 1200 49 221 768 06 4200 Email: sales.dehm@r-stahl.com r-stahl.com
Operating and Monitoring Systems Panel PC SERIES 400 Device platform MANTA PM ET-477-LX Display Touch screen scratch hardness MoHS Foil touch: Glass touch: 5 Touchscreen scratch hardness pencil test ISO15184 Foil touch: 3H Glass touch: 9H Touchscreen transmissivity / optic Foil touch: slightly milky effect due to foil Glass touch: very good Touchscreen surface contaminants unaffected Touchscreen abrasive resistance 36 million activations with a silicone rubber finger R8, 250 g for 2 activations per second Backlight LED Technology Backlight service life 50000 h at 20 C Front plate (display) Aluminium and no touchscreen: glass foil touchscreen: polyester glass touchscreen: thin glass Ambient Conditions Ambient temperature operation -20 C 60 C Storage temperature -30 C 70 C Cold start temperature -10 C Temperature note 2 Operating temperature 60 C for a maximum of 5 h, for constant operation (24/ 7) 50 C. Temperature note 3 Cold start temperature: If the HMI device is switched on at a temperature below -10 C the display will need a certain amount of time to warm up until everything is clearly visible. Depending on how low the temperature is, this process may last up to 3 hours. Heat dissipation about 40% via the front plate and 60% via the enclosure Relative humidity 10 to 90% at 40 C [ 104 F], non- condensing Damp heat cyclic 55 C ( 2 C) 95 % (only devices with glass touch (TG)) Dry heat 65 C Vibration sinus 5 to 13.2 Hz: 1 mm 13.2 to 100 Hz: 0.7 g Change cycle 1 oct/ min Axis X, Y, Z Vibration sinus 1 71.7 to 79.2 Hz: 0.7 g 120 min. Change cycle 1 oct/ min Axis X Vibration sinus 2 30 Hz: 0.7 g 90 min. Change cycle 1 oct/ min Axis Y, Z Mechanical Data Dimensions (WxHxD) 660 mm x 475 mm x 110 mm Cut- out (WxH) 615 mm x 435 mm ( /- 0.5 mm) Wall thickness 5 mm Depth of cut- out 110 mm Mounting position vertical or horizontal Weight 32 kg Material front Aluminium Material back Steel 2022-11-14 R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 50829 KÖLN 4/5 V 0.20 EN Tel. 49 221 768 06 1200 49 221 768 06 4200 Email: sales.dehm@r-stahl.com r-stahl.com
Operating and Monitoring Systems Panel PC SERIES 400 Device platform MANTA PM ET-477-LX Mechanical Data Ingress protection IP66 IP enclosure front IP66 IP enclosure back IP65 Cable gland type HSK- M-Ex Cable gland number 2 x M16, 1 x M20, 3 x M25 Cable gland thread size M16 x 1.5 / M20 x 1.5 / M25 x 1.5 Cable gland cable diameter range 1x M16 4 8 mm / 1x M16 5 . 10 mm / M20 7 13 mm / M25 14 18 mm Cable gland wrench size M16 SW 20 / M20 SW 24 / M25 SW 30 Breather yes, part of the enclosure and device approval Cable gland note Similar certified cable glands may be used. Cable gland note 1 Not used cable glands must be closed by certified screw plugs or stopping plugs ! Mounting / Installation Mounting option Front installation We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding. 2022-11-14 R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 50829 KÖLN 5/5 V 0.20 EN Tel. 49 221 768 06 1200 49 221 768 06 4200 Email: sales.dehm@r-stahl.com r-stahl.com
NEC explosion protection Class I, Zone 1 AEx e q [ia] IIC T4 Gb CEC gas explosion protection Ex e q [ia] IIC T4 Gb Class I, Division 2 CNEX gas explosion protection Ex e q [ia op is Ga] IIC T4 Gb CNEX dust explosion protection Ex tD [iaD op is] A21 IP65 T110 C KCS explosion protection Ex e q IIC T4 Ex tb IIIC IP64 T110 C Ex ia IIC T4 Ex ia .
Hush Panel 28 Hush Panel 32 Hush Panel 33 Hush Panel 37 Hush Panel 48 Hush Panel 52 Hush Ply 28 Hush Ply 32 When installing Hush Cem Panel 28 or Hush Cem Panel 32 the tongue and groove joints are to be glued using Hush Cem Panel Adhesive. All joints to be glued, on all sides of the panel to give the best bond. Adhesive not to be spared .
telemetry 1.24 Service P threshold_migrator 2.11 Monitoring P tomcat 1.30 Monitoring P trellis 20.30 Service P udm_manager 20.30 Service P url_response 4.52 Monitoring P usage_metering 9.28 Monitoring vCloud 2.04 Monitoring P vmax 1.44 Monitoring P vmware 7.15 Monitoring P vnxe_monitor 1.03 Monitoring vplex 1.01 Monitoring P wasp 20.30 UMP P .
Attach and remove the control panel You can attach the control panel directly to the drive, or use a separate mounting kit. To attach the control panel to a drive: 1. Place the bottom end of the control panel into the slot in the drive. 2. Press the control panel lock clip down. 3. Push the control panel into place. To remove the control panel:
PANEL HEMMING TOOL TremLock SL Field Hem 1 1/2" TremLock SLPanel TremLock SL Panel TremLock SL Panel Field Notch Panel Hemming Tool Panel Hemming Tool Panel Hemming Tool NOTES: 1. Cut through male and female legs/ribs 1 1/2" up from panel end as shown. 2. Then cut diagonally with metal shears as shown. 3. Place hemming tool over panel tab. 4.
the transverse panel-to-panel connections are referred to simply as panel-to-panel connections. Panel-to-panel connections can be nonprestressed or post- . (25 100 mm) flat plastic duct (Fig. 5). One of the connections with a stress of 340 psi (2.34 MPa) had an epoxy bonding agent applied to the
What is Media Monitoring and How Do You Use it Monitoring: a history of tracking media What is monitoring? Getting started with monitoring The Benefits and Uses of Monitoring Using media monitoring to combat information overload Tools to maximize monitoring and measurement efforts Using media monitoring to develop media lists
a GuiDe for public Sector uSerS june 2014 Dpp2 panel HANDBOOK centenary Quay, Woolston. 2 01 introduction 02 Scope of the panel 03 use of the panel by other public Sector bodies 06 panel Membership 07 framework agreement 07 Subcontracting 08 the procurement process 09 contractual Structure of panel Members CONTENTS 10 procurement of Works and Services from the panel 11 Scope of the Mini .
7. Place ceiling panel #8 into position and lock it to ceiling panel #7 first, then to the wall panels, leaving the wall-to-ceiling panel camlocks nearest the exposed ceiling panel seam on either side of ceiling panel #8 unlocked. Lock the two wall-to-ceiling panel camlocks left unlocked in step 4 to panel #7.
