Phillips Welding Supply, Inc. Phillips Welding Supply Steel & Pipe Sales
Phillips Welding Supply, Inc. Phillips Welding Supply Steel Sales Steel&&Pipe Pipe Sales 1822 Fort Worth Highway 1822 Fort Worth Weatherford, TexasHighway 76086 (817) 596-0450 Fax (817) Weatherford, Texas596-0742 Toll Free (800) 281-7933 (817) 596-0450 Fax (817) 596-0742 sales@phillipsweldingsupply.com Toll Free (800) 281-7933 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com
Project examples Metal roofing is much stronger and more durable than asphalt shingle roofing. Because metal roofing is so durable, it has long been the choice for many school, government, and industrial buildings. With a 40 year limited paint warranty on our panels, your metal roof can last twice as long as most conventional roofs. We can provide estimates on prefabricated bolt-up buildings or weld-up buildings based on your budget and needs. Our 20 year limited warranty polyester, Polydure Paint System, and 40 year limited warranty Siliconized Modified Polyester, Valspar Paint System, are available in many different colors and are listed in the building components section of our catalog, page 14. Color/profile charts are available upon request. 2 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com
Policies and Procedures Return Material Policy On all refunds, the material must be returned in original condition and accompanied with an invoice within 30 days of the date of purchase. The condition of the material returned will be determined by Phillips Welding Supply. No returns or refunds on sheet metal, trim, doors or special order products. Restocking charge may be assessed at time of return. Stocking and Pricing Policy Some products listed in this catalog are not kept in stock at all times. Due to market fluctuations, prices are subject to change without notice. Please call to verify pricing and availability. If you have an inquiry about a product not listed, please call. If they are not in stock, we would like to special order them for you. Delivery Service Phillips Welding Supply offers a delivery service to its customers. Please call for pricing and availability. Storage Policy All orders on stock products must be picked up, or arrangements made for delivery, within 10 working days from the date of the order. After this time, the material will be placed back into stock. To request an extension, please notify your sales representative. Special Order Policy Phillips Welding Supply requests that all special order items be paid in full, and have written confirmation prior to ordering products. Telephone Orders All special orders received over the phone will require written confirmation prior to ordering. Customers that refuse to submit written confirmation assume full responsibility for the accuracy of their order. Quote and Takeoff Policy Please review and verify all provided information on your quotes and orders e.g. type of item, lengths, quantities, and colors prior to placing your order. Phillips Welding Supply provides the takeoff service as a courtesy and is not liable for errors or omissions. Table of Contents Project examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Beams, & angle iron . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Channels, purlin & eave strut . . . . . . . . . . . . . . . . . . . 5 Hot rolled plate & sheet . . . . . . . . . . . . . . . . . . . . . . . 6 Expanded steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cold rolled sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Weld plates & floor plates. . . . . . . . . . . . . . . . . . . . . . 7 Flat bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Hot & cold rolled round. . . . . . . . . . . . . . . . . . . . . . . . 8 Hot & cold rolled square bar. . . . . . . . . . . . . . . . . . . . 8 Round & rectangular tubing. . . . . . . . . . . . . . . . . . . . 8 Square tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Fencing components . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11 Pipe & structural pipe . . . . . . . . . . . . . . . . . . . . . . . . . 12 Bar grating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Rebar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Anchor bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Sucker rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Miscellaneous building components. . . . . . . . . . . . . . 13 Building components overview . . . . . . . . . . . . . . . . . 14 Building components sheets & trim . . . . . . . . . . . . . . 14 Building component fasteners. . . . . . . . . . . . . . . . . . . 15 Field shear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Doors & door kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Windows, skylights, track & vents . . . . . . . . . . . . . . . 16 Cupolas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Building components trim examples. . . . . . . . . . . . . . 17 - 18 Color Swatches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com 3
Standard I Beam 4” X 2 11/16” X 3/16” X 7.7# 6” X 3-5/16” X 1/4” X 12.5# 8” X 4” X 1/4” X 18.4# WF Beam 4” X 4-1/16” X 3/8” X 13# 6” X 3-15/16” X 3/16” X 9# 6” X 6” X 1/4” X 15# 6” X 6” X 3/8” X 20# 8” X 3-15/16” X 3/16” X 10# 8” X 4” X 1/4” X 13# 8” X 4” X 5/16” X 15# 8” X 5-1/4” X 5/16” X 18# 8” X 6-1/2” X 3/8” X 24# 8” X 8” X 5/16” X 31# 10” X 4” X 3/16 X 12# 10” X 5-3/4” X 1/4” X 22# 12” X 4” X 1/4” X 14# 12” X 4” X 5/16” X 16# 12” X 4” X 3/8” X 19# 12” X 6-1/2” X 3/8” X 26# 14” X 5” X 5/16” X 22# 16” X 5-1/2” X 3/8” X 26# 18” X 6” X 7/16” X 35# 4 Angle Iron 1/2” X 1/2” X 1/8” 3/4” X 3/4” X 1/8” 1” X 1” X 1/8” 1” X 1” X 3/16” 1” X 1” X 1/4” 1-1/4” X 1-1/4” X 1/8” 1-1/4” X 1-1/4” X 3/16” 1-1/2” X 1-1/2” X 1/8” 1-1/2” X 1-1/2” X 3/16” 1-1/2” X 1-1/2” X 1/4” 2” X 2” X 1/8” 2” X 2” X 3/16” 2” X 2” X 1/4” 2” X 2” X 3/8” 2-1/2” X 2-1/2” X 3/16” 2-1/2” X 2-1/2” X 1/4” 3” X 2” X 3/16” 3” X 2” X 1/4” 3” X 3” X 3/16” 3” X 3” X 1/4” 3” X 3” X 3/8” 3” X 3” X 1/2” 3-1/2” X 3-1/2” X 1/4” 4” X 3” X 1/4” 4” X 4” X 1/4” 4” X 4” X 3/8” 4” X 4” X 1/2” 5” X 3” X 1/4” 5” X 5” X 3/8” 6” X 4” X 3/8” 6” X 6” X 3/8” 6” X 6” X 1/2” 8” X 4” X 1/2” 2” X 2” X 14ga Painted Base 4” X 2” X 14ga Painted Base 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com
Receiver Channels Purling, Receiver & EavePurling, Strut & Eave Strut Channels Standard Channels & Eave Strut Purling, & Eave StrutReceiver dard Channels andard Channels 1 x 1/2 x 1/8 x 1/2 x 1/8 x 1.12# 1-1/2 x 1/2 x 1/8 x x 1/8x x1/8 1.59# x1 1/2 2 x 1x .8# x 1/8 x 1 x 1/2 x 1/8 x .8# 1-3/8 x 5/32 x 3.5# 2 x 1/2 3x x1/81-3/8 x 1.12# x 5/32 x -1/2 x 1/2 x 1/8 x 1.12# 1-3/8 3/16 x 4.1# x 1” Xx1 1/2” x 1/8 x 1.59# .8# 3X 1/8” x X1-3/8 x 3/16 x 2x x1-3/8 1 x 5/32 x 4.5# 1/8 x 1.59# 1-9/16 x 1/8 x x 3.5# 1-1/2” X 41/2” xX 1/8” X 1.12# 1-9/16 x 1/8 x 1-9/16 x 3/16 x 5.4# 3x 2” x1-3/8 1-3/8 x 5/32 x 3.5# x 3/16 x 4.1# X 1” X41/8” xX 1.59# 1-9/16 x 3/16 x 1-3/4 5/16 x1/8 3x 1-9/16 x Xx 1-3/8” 1-3/8 x 7.25# 3/16 xx 5/16 4.1# x 4.5# 3” Xx3.5# 4x X x5/32” 1-3/4 -11/16 3/16 x x 6.7# 4x 1-9/16 x Xx1-9/16 1/8 xx 3/16 4.5# x 5.4# 3” 1-3/8” Xx4.1# 5x X3/16 x3/16” 1-11/16 1-7/8 x 3/16 x x 8.2# 4x 4” x1-3/4 3/16 xx 3/16 5.4# x 7.25# X1-9/16 1-9/16” Xx4.5# 6x X5/16 x 1/8” 1-7/8 2-1/16 1/4x 3/16 x 9.8# 4x 1-11/16 x Xx 1-9/16” 1-3/4 5/16 xx 7.25# xX 5.4# 6.7# 4” 3/16” 7 Xx x 2-1/16 1/4 x 2-1/4 x 1/4 x 11.5# 8.2# 5x 4” x1-7/8 x 2-1/4 3/16 xx 1/4 6.7# x X1-11/16 1-3/4” Xx7.25# 8x X3/16 x5/16” 2-5/8 x 1/4 x 15.3# xX 6.7# 9.8# 10x x1/4 2-5/8 5” Xx3/16” 6x 2-1/16 x X 1-11/16” 1-7/8 3/16 xx 1/4 8.2# x -15/16 x 1/4 x 20.7# 1/4 11.5# 12x X x3/16” X2-1/16 1-7/8” Xx8.2# 7x 6” x2-1/4 x2-15/16 1/4 xx 1/4 9.8# x x X1/4 15.3# X 2-1/16” Xx9.8# 8x 7” x2-5/8 2-1/4 x1/4” 1/4 x 11.5# x 2-15/16 x X 1/4” 1/4 x 20.7# 8” 11.5# 10 x X 2-1/4” 2-5/8 x X1/4 x 15.3# X 2-5/8” X x 1/4” 1/4 X 15.3# 12 10” x 2-15/16 x 20.7# 12” X 2-15/16” X 1/4” X 20.7# Channels Junior Channels Junior Channels nior Channels .8# 1.12# 1.59# 3.5# 4.1# 4.5# 5.4# 7.25# 6.7# 8.2# 9.8# 11.5# 15.3# 20.7# 1-1/2 x 3/16 x 8.4# 10 x 1-1/2 x 3/16 x 8.4# 1-1/2 x 3/16 x 10.6# x 1-1/2 x 3/16 x 10.6# 10” X 1-1/2”12 X 3/16” X 8.4# 12” X 1-1/2” X 3/16” X 10.6# 10 x 1-1/2 x 3/16 x 8.4# 12 x 1-1/2 x 3/16 x 10.6# unior Channels 10 x 1-1/2 x 3/16 x 8.4# 12 x 1-1/2 x 3/16 x 10.6# Painted CEE Purlin Painted CEE Purlin 3 x 1-1/2 x 14ga 3 x 1-1/2 4 Painted x CEE 1-1/2 x 14ga Purlin 4 x 1-1/2 6 2CEE Purlin x 14ga Painted CEE xPurlin 3 xPainted 1-1/2 x 6 x 2 8 x 2-1/2 x 14ga 3 x 1-1/2 1-1/2x x2-1/2 3” 4 x 1-1/2”x 8x 14ga 8 12ga 4” 6 x 1-1/2” 4 3-1/2 x 2 x x 1-1/2 x 8x 14ga x3-1/2 14gax2-1/2 10 4” 8 xx 2”6x 2-3/4 x 214ga x 10 x2-3/4 x 6” x 2” x 14ga 12 x 2-1/2 14ga 8 3-1/2 8x x 12 x3-1/2 x3-1/2 x 8” x 2-1/2” x 14ga Painted Reciever x x 12ga 2-3/4 3-1/2 x 8 Painted xReciever 8”10x 3-1/2” 4 x 2 x 14ga 12x 2-3/4” x 2 10” 10 x 4x 14ga x3-1/2x 2-3/4 6 x 2-1/2 x 14ga 12” x Reciever 3-1/2” Painted 6x 14ga x 3-1/2 2-1/2 12 x 8 x 3 x 14ga 4 Painted x Reciever 2 x x 3 8 Painted Receiver 8 x 3 x 12ga 6 x 8 2-1/2x x 3 214ga 10 4” xx 2”4x 3 14gax x x 3 6” 8 x 2-1/2” x 14ga 6 x 10 x 3 x 2-1/2 8” 8 x 3” x2-3/4x5 14ga x 8 14ga x 8 x 8 x 3 x 32-3/4x5 8”10x 3” x x 12ga 3 x Painted Zee Purlin 10” x 3”8x Painted 14gax Zee Purlin3 8 8 x 10 2-1/2 x 8 2-3/4x5 x2-1/2 x xx 314ga Eave Strut (2:12 Dbl Pitch) Painted Zee 8 Purlin x 2-3/4x5 8” 8 x 5” x x 2-3/4” 2-1/2 x 14ga x Painted Zee Purlin Painted Zee Purlin Channels 8” 8 2-1/2” x x x 14ga 2-1/2 14ga x 14ga x 14ga x 14ga x 12ga 14ga x 14ga x x 14ga 14ga x 14ga x 12ga x 14ga x 14ga x x 14ga x Formed (Stall) Channels Formed Channels Formed (Stall) (Stall) Channels 1-5/8 1-5/8 1-5/8 Formed (Stall) Channels x 1-5/8 x 14ga x 8' 1-5/8” x1-5/8 1-5/8” x x14ga1-5/8 x 8’ x 1-5/8 x 14ga x 10' 1-5/8” x1-5/8 1-5/8” x x14ga1-5/8 x 10’ x 1-5/8 x1-5/8” 14ga xx 12’ 12' 1-5/8” x1-5/8 x x14ga1-5/8 1-5/8 x 1-5/8 x 14ga x x x x 14ga 14ga 14ga 8' x x x 8' 10' 12' Formed (Stall) Channels 1-5/8 x 1-5/8 x 14ga x 10' 1-5/8 1-5/8 x 1-5/8 x 14ga x 12' x x 1-5/8 x 14ga 1-5/8 1-5/8 x x 1-5/8 1-5/8 x x 14ga 14ga 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com x x 8' 10' 12' 5
48 48 96 120 96 120 24 x 48 24 x 48 48 x 48 48 x 48 Page 6 48 x 96 48 x 96 48 x 120 48 x 120 18ga Cold Rolled 603/16” x 96 60 x 120 1” 1/2” x 96 48 3/16” 60 24 x x120 24 1/2” 24 x 24 1” 1” 24 x 24 3/16” 1/2” Pagex624” 24” 24” x 24 24” x 48 24” x 24” 24 24 24 xx 48 24 24 x 24 24 xx 48 24 24” x 48” 24” x 48” 24” x 48” 48 x 48 48 x 48 48 xx 48 24 x 48 24 x 48 24 48 3/4” 18ga Cold Rolled 48” x 48” 48” x 48 48” x 96 48” x 48” 48 x 96 48 x 96 48 x2448 48 x 48 48 x 48 24 48” x 96” 48” x 48 96” x 120 48” x 96” x 48” x 96” 48 48 48 xx 120 96 48 x 96 48 xx 120 96 18ga Cold Rolled 1” x 120” x 120 48”24 x 3/16” 120” 48”1/2” x 60 120”x 96 48” x xx4896 60 48 120 48 x 120 24 60 48 x 120 x 96 48 24 x 24 60” x2496”x 24 x 24 60”48 x 96” 60” x 120” 18ga Cold Rolled 60 xx48 120 60 xx 120 x 60 96 60 96 60 x 120 24 x 48 60” x24120” x 48 24 x 48 60” x 120” x 96 48 60 x 120 60 x 120 48 48 96 x x 48 48 x 48 48 x 48 1/4” 3/4” 1/4” 96 3/4”48 x 96 48 x 96 48 48x xx120 16ga 11ga 24 24 24 24 x 24” x 24” 24” x 24” 48 x 120 48 x 120 48 x 120 1/4” 3/4” 24 18gaxCold96 Rolled 12 x 120 x x120 48 24 24 60 60 x 120 24”60 x 48” 24xxx 9648 24 24 x x 962424” x6048” x 48 x 96 96 48 24 x 120 x 48 48 60 48” x 48” 48” 4848” x6048 24xxx12048 48 24 x x 120 x 96 48 48 48 x 120 48 x 96 48” x 96” 48 xx 96 48 48 x 4848” x 96” x 120 48 3/4” 48 11ga x 16ga 96 120 48” x 1/4” 120” 48 xx 120 96 60 16ga 48 x 11ga 48 x 9648” x 120” x 24 24 24 x 96 24 x 24 12 x x 96 60 120 60 x 24” x120 96” 12”120 x 120” 60” x 96” 12060” x 120” 48 x 120 16ga 11ga 48 x x 48 x 144 60 48 x 24 48 24 x 120 x xx 96 120 48 24 x 60 96 120 24 12 x 48” x 96” 24” x 120” 120 60” x 120” 60 x x 4896 48 60 60 x 48 96 48 x x 48 xx 120 48 xx 96 96 120 48 24 x 120 60 x 144” 48” x 120” x 96 48”120 x 96” 60 x 96 48 x 96 48 120 60 48 x 60 x 3/8” x 120 x 120 48 48 x 48 120 16ga 11ga 60” x 60 96” x 120 48”144 x96120” 48 x 48 x 24 x 24 3/8” 3/8” 96 x 120 60 48 x48”120 96 x 12 24 60 x 120 60 x 96 60” xx 120” x 144” 96 60 24 x 48 24” x 24” x 120 96 48 xx 144 48 x 60 24 x 120 14ga 10ga 24 x x 120 24 60 x9696” 60 xx60”120 x 120 48 24” x 48” 48 x 96 60 24 24 xx 48 48 48 48x x 24 24 x x 120” 96 60 48 x 120 48 48” x 3/8” 48” 60 x60”120 48 xx 96 48 x 48 48 48 24 x 14ga 10ga x 120 144 60 48 x 24 xx 24 48 48” x 96” 48 x 120 96 14ga x 24 24 48 24 x10ga 60 x 48 48 48 48x x96 24 x 48 60 14ga 10ga 48” x 120” 48 xx 96 120 48” x 96” xx 48 x 96” 60 x 120 x48”48 48 xx 48 24 96 48 24 96 x 24 60 120 60 x 48 48 x 24 60” x 96” 60 x 96 x 48 48 48” x 48 120” x 120” 48 xx48” 48 48 x 96 48 48 x 10ga 24120 x 120 60” x 120” 60 14ga 48 x 60 x x 120 120 x 96 96 60 48 x 48 48” x 144” x 48 x 96” 48 x60” 48 24 x 120 48 x 48 24 x x24 96 60 120 60 x 96 60 48 x 60” x 96” x 120” 96 x 48 48 x60” 96 48 x 24 48 x 60 60 x 120 96 60 x 120 60 x x 120 120 60” xx 120” 60 48 x 48 48 48 x 48 Page 6 HotHotRolled Plate Rolled Plate Hot Rolled Plate Hot Rolled Plate 24 48 48 96 120 96 120 Cold RolledSheet Sheet Cold Rolled Cold Rolled Sheet HotColdRolled Rolled Sheet Sheet Rolled Sheet HotHot Rolled Sheet Hot Rolled Sheet Hot Rolled Sheet 24 48 48 96 120 96 120 ed Steel Expanded Steel Expanded Steel Expanded Steel 60 x 96 48 x 120 60 96 60 xx 96 Flattened Expanded Steel x P&O 120 (Pickled 120 60 48 x& & 60 x 120 Flattened Expanded Steel 11ga Oiled) 14ga P&O (Pickled Oiled) 14ga P&O (Pickled & Oiled) #24 #9 96 Flattened Steel 48 x 96 x 3/4 x 6 x 1/8 x 48Expanded 60 x 48 x 96 x 3/4 x #9 x 96 x 1/8 x #24 120” x 120 x x120 48 48” Flattened Expanded Steel 48 60 (Pickled x 120 & Oiled) #16 6 x 1/2 120 x#243/4 48” xx96” x 1/8” #24 60”60xx96” x 3/4” x #9x #9 14ga P&O 48 x 96x60 x x 1/2 x #16 x #9 120 x 3/4 #9 48 x 96 x 3/4 x 48 x 96 x 1/8 x 48 x 96x72 xFlattened 1/2 x #13 x #9 120 x 3/4x #9 x #9 48 x 120 #13 6 x 1/2 120 x#163/4 x120” 48” xx96” x 1/2” 60”72 xSteel 48 x 96#16 x x1/2 x Expanded 60 x 120x x3/4” 3/4 x #9 14ga P&O 12ga P&O 12ga 48 48x48 3/496 x #9 96 x 1-1/2 48 48 x x96 x 3/4 x #9x #9 xx 96 xx 1/8 x x#24#9 12ga x 120(Pickled & Oiled) 8 x 3/4 48” xx96”#9 x 1/2” #13 72” x 120” x #9 #131-1/2 48 x 96 x x1/2 xx 72 x 120x x3/4” 3/4 x #9 48 x 24 48” 96” 48 x 96 x 1/2 x #16 60 x 120 x 3/4 x #9 12ga x x 24 24 24 #9 48”48 1-1/2 #9 48 x 48 x 3/4 x x 96 x x 48” x 48”Standard x 3/4” x #9 x 96” x 1-1/2” x #9 x 48 48 x 96 xExpanded 1/2 x #13Steel 72 x 120 x 3/4 x #9 24 24 x 24 12ga x 48 12ga 24 #9 1-1/2 #9 d Expanded Steel 48 x 48 x 3/4 x 48 x 96 x x #9 48 xx 48 48” x 96”48 x 3/4” x 96x #9 x 3/4 x 48 x 24 24 Standard Expanded Steel 24 48” 96” x xx 48 48 xx 96 48 24 6 x 3/4 x #9 48 xx 96 xx1-1/2 xx #9 48 48 #9 48 48 96 3/4 Standard Expanded Steel Standard Expanded Steel x 120 48” x 120” 48 #6 x 96 48 x 96 x x #9 48 48 x 96 6 x 1-1/2 x 48 48 x 48 1-1/2 x #9 48 xx9696x x3/4 x #9 1-1/2 48” x 96”48 x 3/4” x x#91-1/2 60 60” x 96” x 96 xx 96 #9 48 x 96 x 120 x 120 48 48 6 x 1-1/2 x #648 x 96 x 1-1/2 x #6 x 120 60 x 120 Grating 48” x 96”48 x 1-1/2” x #9 48 60” x 120” x 96 x 1-1/2 x #6 60 x 96 60 60x x 96 96 x 96 x #6 4.27# 48” x 96”48 x 1-1/2” 60 x 120 Grating x 120 x 120 60 60 Grating ating 48 x 96 x 4.27# 48 x 96 x 4.27# Grating 6 x 4.27# 48” x 96” x Phillips 4.27# Welding Supply Steel & Pipe Sales 1822 Fort Worth Highway, Weatherford, Texas 76086 817-593-0450 Expanded Steel 6 Phillips Welding Supply &Texas Pipe Sales1822 1822 Fort Worth Weatherford, Texas 76086 817-593-0450817-593-0450 1822 FortWelding Worth Highway Weatherford, 596-0450 Fax (817)Highway, 596-0742Highway, Toll Free (800) 281-7933 sales@phillipsweldingsupply.com Phillips Supply SteelSteel & Pipe Sales (817) Fort Worth Weatherford, Texas 76086 ps Welding Supply Steel & Pipe Sales 1822 Fort Worth Highway, Weatherford, Texas 76086 817-593-0450
Weld Plates Weld Plates Flat Bars Flat Bars Purlin Clips Purlin Clips 3 x 5 x 10ga 3” x 5” 4 x x10ga 6 x 3/16 4” x 6” 5 x x3/16” 7 x 3/16 Purlin Clips 6 x 9 x 3/16 5” x 7”3x 3/16” x 5 x 10ga 6” x 9”4x 3/16” x 6 x 3/16 Weld Plates Flat Bars Weld Plates 5 x x 6 7 x x1/4 3/16 8 x 15 x 1/2 Weld 6Plates 3/16 8 6 x x 8 9 x x1/4 8 x 17 x 1/2 6” x 6” x 1/4” 8” 8x 15” x 1/2” 6 x 9 x 1/2 x 19 x 1/2 Weld Plates 8” x 8” 8” x 17” x 1/2” Purlin Clips 6 x x1/4” 13 x 1/2 6 x 6 x 1/4 8 x 15 x 1/2 x 5 x 10ga 8” x 19” x 1/2” 6” x 9”3 x 1/2” 8 x 8 x 1/4 8 x 17 x 1/2 4 xPlates x 1/2” 6 W/Holes x 3/16 6” x Weld 13” 1/2 8 x 19 x 1/2 356 xxx 879 xxx3/16 1/4 With 2-9/16 holes 6 x 13 x 1/2 49 xx 3/16 6 xx W/Holes 3/16With 4-3/8 holes Weld 4Plates Purlin Clips 6 x 6 x 1/4 With 4-3/8 holes 3” x 8” x 1/4” W/2 Plates 3 holes x 5 x 10ga 8Weld xPlates 8 x W/Holes 1/4 With 4-7/16 holes Weld 4 6 x2-9/16 3/16 holes 3 x 8 x 1/4 With 4” x 4”6 x 3/16” W/4 xholes x 6 x 1/4 8 x 15 x 1/2 5 x 7 x 3/16 holes x 4 With x 3/16 With 4-3/8 6” x Weld 6”84x 1/4” holes Plates Studs x 8 W/4 x 61/4 8 3/16 x 17 x 1/2 x 9 x 6 x x 6 6 x x3/8 1/4 With 4-3/8 holes 6 W/4 (1/2 6)19Studs 6 x 9 x 1/2 8 x x 1/2 8” x 8”8x 1/4” W/41/4 holes With 4-7/16 holes 66 xxx 13 9 8 xxxWeld 1/2 W/5 (5/8 x 8) Studs 1/2 Plates x 13 x Studs 1/2 W/6 x 8) Studs Weld 6Plates With 6 xStuds 6 (5/8 x 1/4 8 x 15 x 1/2 Weld Plates With 8 x 15 x 1/2 W/8 (5/8 x 8) Studs Weld Plates W/Holes 8 x 8 x 1/4 8 x 17 x 1/2 6” x 6”6x 3/8” (1/2W/4 x 6)(1/2 Studs 6W/4 x 3/8 Studs 83 xxx 17 x x8)6) Studs 8 xx 1/2 61/4xW/8 9 (5/8 x2-9/16 1/2 8 x 19 x 1/2 With holes 6” x 9” x 1/2” 9W/5 (5/8W/5 x 8)(5/8 Studs x1/2 1/2 8)Studs Studs 846 xxx 19 x x8) 4 xx 3/16 6 xW/8 13 (5/8 x4-3/8 1/2 With holes 6 x 13 x 1/2 W/6 (5/8 x 8) Studs 6” x 13” x 4-3/8 8) Studs 6 xx 1/2” 6 W/6 x 1/4(5/8 With holes 8 x 15 xWeld 1/2Plates W/8 W/Holes (5/8 x 8) Studs 8” x 15” x 4-7/16 8) Studs 8 xx 1/2” 8 W/8 x 1/4(5/8 With holes 8 x 17 x 3 1/2x W/8 8) Studs 8 x(5/8 1/4x With 2-9/16 holes 8” x 17” (5/8 x 8) Studs 8 x x1/2” 19 W/8 x 4 1/2 8) Studs x W/8 4 x(5/8 3/16x With 4-3/8 holes Weld Plates With Studs 8” x 19” x 1/2” W/8 (5/86x x8)1/4 Studs With 4-3/8 holes 6 x 6 x 63/8x W/4 (1/2 x 6) Studs 8 x 8 x 1/4 With 4-7/16 holes 6 x 9 x 1/2 W/5 (5/8 x 8) Studs 14ga 6 x 13 x 1/2 W/6 (5/8 x 8) Studs x 96Weld Plates With Studs 48 8 x 15 x 1/2 W/8 (5/8 x 8) Studs 6 x 6 x 3/8 W/4 (1/2 x 6) Studs 8 x 17 x 1/2 W/8 (5/8 x 8) Studs 6 x 9 x 1/2 W/5 (5/8 x 8) Studs 1/8 8 x 19 x 61/2x W/8 (5/8 Studs 14ga 131/4 x 1/2x 8) W/6 (5/8 x 8) Studs 120 48 x x 96 (5/8 x 8) Studs 1448 x 15 x481/2 xW/8 96 4848 x Weld Plates 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1 1 1 x 12 x 1 x 1-1/2 x 2 x 2-1/2 x 3 x 4 x 5 x 6 x 8 x 10 x 12 x 2 x 3 x 6 x 1/2 x 4 x 6 x 8 x 12 Weld Plates x 1 x 1-1/2 x 2 x 3 x 4 x 5 x 6 x 8 x 12 x 1/2 x 3/4 x 1 x 1-1/4 x 1-1/2 x 2 x 2-1/12 x 36 x 4 x 5 x 6 x 8 x 10 x 12 Floor Plates Floor Plates 96 8 10 12 x 96 120 120 x x x 3/8 48 96 3/8 luminium x 96 96 96 120 120 96 120 x x x x x x x 48 48 48 60 1/4 48 48 60 144 96 120 x x x 120 144 96 120 6) 8) 8) 8) 8) 8) x x x x x x x x x 60” x 120” 48 60 60 96 x 96 x x 120 1/4 x 120 1/4” x 8” 1/4 1/4 1/4” x 10” 1/4 1/4” x 12” x x x x 3/8 48 (1/2 (5/8 (5/8 (5/8 (5/8 (5/8 3/16 96 48 x 1/8 Aluminium x 120 48” x6096” 3/16 Plates With Studs x 6 x 3/8 W/4 x 9 x 1/2 W/5 x 13 x 1/2 W/6 x 15 x 1/2 W/8 x 17 x 1/2 W/8 x 19 x 1/2 W/8 48 48 120 60 2-9/16 holes 4-3/8 holes 4-3/8 holes 4-7/16 holes 144 48 x 1/8 96 60 x 3/16 1/8 Aluminium 48 x 48” x60 96”xx 120 49 96 96 120 120 96 Flat Bars 96 Studs Studs Studs Studs Studs Studs Floor Plates x x xx Flat Bars x 1/4 144 48 48 x 1/83/16 x 96 48 60 96 48”14ga x 96”x 48 3/8 x 120 60 xx 120 4860 48” 60 x48120” 96 1/4 48” 3/16 x 144” 48” x 96” 1/8 Aluminium 14ga 1/8 60” 49 x4896”x x 9696 48” x 120” 3/8 96 48 x 1/4 x 120 48 60” x48 120”x 12060” x 120” 60 Plates Floor Plates x 17 x481/2 xW/8120 (5/8 x 8) Studs x 19 x601/2 xW/8120 (5/8 x 8) Studs Plates W/Holes x 8 x 1/4 With x 4 x 3/16 With x 6 x 1/4 With x 8 x 1/4 With x 13 x 1/2 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Floor Plates 96 8 14ga60 x 1/8 8 x 120 48” 60 x4896” x 120 1/8 x 1/2 3/8 x 1 1/8 x 3/4 3/8 3/8” x 1-1/2 1/8” x 1/2” x 1” 1/8 x 1 3/8 x 2 1/8” x 1-1/2” 1/8x 3/4” x 1-1/2 3/8 3/8” x 2-1/2 1/8 x 1/2 3/8 x 1 1/8x 1” x 2 3/8 3/8” x 3 1/8” x 2” 1/8 x 3/4 3/8 x 1-1/2 1/8 x 3 3/8 x 4 1/8”1/8 x 1-1/2” x 1 3/8 3/8” x x 22-1/2” 1/8 x 4 3/8 x 5 1/8 x 1-1/2 3/8 x 2-1/2 1/8” x 3” 1/8x 2” x 6 3/8 3/8” x 6 1/8 x 2 3/8 x 3 1/8 x 8 3/8 x 8 1/8”1/8 x 3”x 3 3/8” x 4” 3/8 x 4 3/16 x 3/4 3/8 x 10 1/8 3/8 3/8” x x 55” 1/8” x 4”x 1 4 3/16 3/8 1/8 xx 1/2 3/8 xx 12 1 1/8 x 6 3/8 x 6 3/16 xx 1-1/2 1/2 xx 1-1/2 1 1/8” x 6” 1/8x 6” 3/4 3/8 3/8” 1/8 x 8 3/8 x 8 3/16 xx 21 1/2 xx 1-1/2 1/8x 8” 3/8 3/8” 2 8” 1/8” 3/16 x 3/4 3/8 x x10 3/16 3 1/2 2 1/8 xx 1-1/2 3/8 xx 2-1/2 3/16 x 1 3/8 x x12 3/16” 3/16 1/2 xx 2-1/2 1/8 xxx3/4”42 3/8 3/8” 3 10” 3/16 x 1-1/2 1/8 x 1/2 1/2 x 3/81 x 1 3/16 1/2 xx 3 1/8 xxx1” 53 3/8 3/8” 3/16” x4 12” 3/16 x 1/8 2 x 3/4 1/2 x 3/8 1-1/2x 1-1/2 3/16 1/2 1/8 xx 64 3/8 xx 45 3/16” x 21”x 2 3/16x 1-1/2” x 1/8 3 x 1 1/2 1/2” x 3/8 3/16 86 1/2 1/8 xx 1/8 3/8 xx 56 x 2-1/2 3/16 x 4 x 1-1/2 1/2 x 3/8 2-1/2 3/16 xx 6 3/16” x8 1-1/2” 1/8 xxx2” 12 8 x 2 1/2 3/8 1/2” 3/16 x 1/8 5 1/2 x 3/83 x 3 1/4 xx 1/2 1/2 x 8 3/16 3/4 3/8 x 10 3/16” x 42”x 4 3/16x 3” x 1/8 6 x 3 1/2 1/2” x 3/8 1/4 xx 3/4 10 3/16 1 x 4 1/2 3/8 xx 3/8 12 x 5 1/8 3/16 x 8 1/2 x x 52-1/2” 3/16” 1/4 xxx4”1-1/2 1 xx 3/8 12 3/16 1/2 1/2” 1 x 6 1/8 x 6 1/2 3/16 x 12 1/2 x 6 1/4 xxx5”1-1/4 xx 3/8 2 3/16 2 x 8 3/4 1/2 1/2” 1-1/2 1/8 3/16” x 3”x 8 1/4 x 1/2 1/2 x 8 1/4 xx 1-1/2 32 x 10 3/16 3 x 3/43/4 1/2 xx 3/8 3/16 3/16” 4” 1/4x 6” x 3/4 1/2 1/2” x x10 1/4 xx 3/16 24 x 1 3/4 6 x 12 3/16 1/2 xx 3/8 2-1/2 1/4 x 1 1/2 x 12 3/16 3/16” x3 5”x 1 1/4 xxx8” 2-1/12 1 1/2” xx 1/2 1/2 3/16 5 x 1-1/21/2 1/4 x 3/16 1-1/4 x 2 3/4 x 1/22 x 1-1/2 1/4 x 36 1 x 4 3/16x x12” 6 1/2 x x4 6” 3/16” 1/4 x 1-1/2 x 3 3/4 1/2” x 3 x 2 1/4 xx 3/16 48 1 xx 1/2 65 3/16 1/2 1/4 x 3/16 2 x 4 3/4 1/2” x x 68”x 2-1/2 1/4” 1/4x 1/2” xx 12 5 1 xx 1/2 86 3/16 1/2 1/4 x 2-1/12 1 x 1/2 1/2x 3 3/16 x 5 1/2 1/4 x 6 1 x 12 1/4 x 1/2 x 1/4”1/4 x 3/4” 1/2” x8 10” x 3/16 36 x 6 1 x 1/24 x 4 1/4 8 1/4 xx 3/4 1/2 x 10 1/4” x 1” x 612” 1/4 x 3/16 4 x 8 1 1/2” x 1/2 x 5 1/4 1/4 xx 10 1 1/2 x 12 3/16 x 12 1 1/28 x 6 1/4 x 5 x 1/4” 1/4 xx 1-1/4 12 1/4x 1-1/4” 3/4 3/4” x x2 2” 1/4 x 1/4 6 x 1/2 1 x 1/212 x 8 1/4 x 1-1/2 3/4 x x3 3” 1/4”1/4 x 1-1/2” 3/4” 1/2 x 10 x 1/4 8 x 3/4 1/4 x 1/4 2 x 1 3/4 x 1/26 x 12 1/4 x 10 1/4” x 6” 1/4x 2” x 2-1/12 x 1-1/4 1 3/4” x 3/4 1/2 x 2 1/4 x 1/4 12 1/4x 2-1/2” x 1/4 36 x 1-1/2 1 1”x x3/4 4 x 3 1/4” 2” 1/4 x 1/4 6 x 6 1/4” x 3” 45 x 2 11 1”xx x3/4 4” 1/4 x 1/4 x 2-1/12 18 x 1/2 1/4” 1/4x 4” x 1/4 6 x 36 1 1”x x 16” 12 x 4 1/4x 5” x 1/4 8 x 4 1/4” 1” x 18” x 6 1 x 8 1/4 x 1/4 10 x 5 1/4” 1” x 112”x 12 1/4x 6” x 1/4 12 x 6 1/8 Aluminium x 120 96 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com 60 Highway 1822 Fort Worth Weatherford, Texas48(817)x596-0450 49 x 96 1/8 Aluminium 7
2 8 4 8 4 x 2 2x x3/16 1 (.188) x 14ga (.075) 2 x 1 x 5/8 4 x 2 2x x1/4 1 (.250) x 11ga (.120) 3 x 1-1/2 x 3/4 4 x 3 3x x1/4 1 (.250) x 14ga (.075) 3 x 2 x 7/8 1/4 6 x 2 3x x3/16 2 (.188) x 11ga (.120) 4 x 2 x 1 5/16 6 x 4 3x x1/4 2 (.250) x 3/16 (.188) 6 x 2 x 1-1/16 3/8 2 4x 11ga x Tubing 2 (.120) x 14ga (.075) 6 x 2 x Hot Rolled 8 xUnpainted Painted 1-1/4 7/16 1/4” 8 Unpainted x2” x41”4xx 14ga (.188) x3/16 2(.075) x 11ga (.120) 2” x 1” x 14ga (.075) Painted 1-3/8 1/2 5/16” 8 xTubing (.250) x1/4 2(.120) x 3/16 (.188) 2” x41”4x x 11ga 3” x 1-1/2” x 14ga (.075) 3/8”2 x 1 x 14ga (.075) 1-1/2 5/8 2 x(.250) 1 x 14ga (.075) Unpainted x 2(.075) x 1/4 3” x 1”4 x 14ga 3” x 2” Painted x 14ga (.075) 7/16” 2 3/4 2 x 1 x 11ga (.120) 3 x 1-1/2 x 14ga (.075) Tubing 4 x 3(.120) x 1/4 (.250) 1/2”3 x 1 3” 14ga (.075) (.075) 2xx 2” x1 x14ga (.075) 2x x14ga x 2”1x 11ga x 14ga (.075)3 x 2 4” x 14ga (.075) 7/8 1/4 6 x 2 x 3/16 (.188) 9/16”3 x 2 3” 2x x11ga x 2”1x 3/16” x 11ga (.120) 3 x 1-1/2 x 14ga (.075) (.120)(.188) 4 x 6” 2 x 2” x x14ga 14ga(.075) (.075) 15/8” 5/16 3x 3/16 x 6 1 (.188) xx14ga (.075) 3 2x x2 14ga x 14ga (.075) 4 x 1/4 (.250) 3 x 2 6 x (.075) 1/4 4” xx 2”2x 14ga (.075) 6”xx 2”2 x 11ga (.120) 3/8 1-1/16 3 x 11ga (.120) 4 x 14ga (.075) 3/4”4 x 2 x 14ga 6 x (.120) 2 x 11ga (.120) 82 (.075) x3/16 2 (.188) x 11ga 5/16 3 x x 6 x 2 x 14ga (.075) 7/16 2” x 11ga (.120) 1-1/4 7/8”4 x 2 4”x x11ga (.120) 3/8 8 x 4 x 3/16 (.188) 4 x 2 x 14ga (.075) 6 x 2 x 11ga (.120) 1/2 1”4 x 2 4” 2”2x (.188) 3/16” (.188) x x3/16 7/16 1-3/8 4 x 8 xx11ga (.120) 4 x 1/4 (.250) 5/8 1/2 4 x 2 4x x1/4 (.250) 1-1/4” 2 x 3/16 (.188) 4” x 2” x 1/4” (.250) 1-1/2 3/4 5/8 4 x 3 4x x1/4 1-3/8” 2 (.250) x 1/4 (.250) 23/4 6 x 2 4” x 3” x 1/4” (.250) 7/8 4x 3/16 x 3 (.188) x 1/4 (.250) 1/8, 12' lengths Round Bar Stock 3/16, 12' lengths Round Bar Stock 1/4 Cold Rolled Round Bar Stock 1/16 1/8” 5/16 1/4 3/16” 3/8 3/8 1/4” 1/2 1/2 5/16” 5/8 3/8” 3/4 1/8, 1/2” 12' lengths 7/8 12' lengths 3/16, 5/8” 1/8, 12' lengths 1/4 1 3/4” 3/16, 12' lengths 5/16 1-1/16 7/8” 1/4 3/8 1”1-1/4 5/16 1/2 3/8 1-1/8” 1-3/8 5/8 1/2 1-1/4” 1-1/2 3/4 5/8 1-3/8” 3/4 7/8 2 1-1/2” Cold Rolled Rectangular Tubing Hot Rolled Cold Rolled 1 2” 1-1/16 1-1/4 1-3/8 1-1/2 2 Rectangular Tubing Rectangular Tubing Hot Rolled Round Tubing 1-1/2” 7/8 6x xx1/4 x 3/16(.188) (.188) 2”2x(.250) 3/16” 6 x 4 6” 1-3/4” 1 6 x 4 x 1/4 (.250) (.120) 2”8 x 2 6”x x11ga 4” x 1/4” (.250) 1-1/16 8 x 2 x 11ga (.120) 8 x 4 x 3/16 (.188) 1-1/4 8” 8 xx 2”4x 11ga x 3/16(.120) (.188)3/4 x 14ga (.250) 1-3/88 x 4 8x x1/4 4 x 1/4 (.250) 8” x 4” x 3/16” (.188) 1 x 14ga 1-1/2 2 1 x 12ga (Sch 10) 8” x 4” x 1/4” (.250) 1 1-1/16 1-1/4 1-3/8 1-1/2 2 7/8 1 1-1/16 1-1/4 1-3/8 1-1/2 2 uare Bar Stock Hot Rolled ld Square Rolled Bar Stock Square Bar Stock 16 4 16 Square BarSquare StockBar Stock Cold Rolled Cold Rolled 3/16” 1/4” 5/16” 3/16 1/4 3/16 1/4 5/16 5/16 8 3/8 1/2 5/8 3/4 7/8 1 Round Tubing Round Tubing Tubing RoundRound Tubing Hot Rolled 3/16 1/4 5/16 Hot Rolled 3/8” 1/2” 5/8” 3/4” 7/8” 1” 3/8 1/2 5/8 3/4 7/8 1 2 2-3/8 2-3/8 1-1/4 x 11ga 1-5/16 (1.315) x 14ga 1-5/16 (1.315) x 11ga 1-1/2 x 11ga 3/4 x 14ga 1-5/8 (1.660) x 14ga 3/4” OD x 14ga 2” OD x 11ga 1 x 14ga 1-5/8 x 11ga 1” OD x 14ga 2-3/8” OD x 14ga 1-3/4 x 11ga 1 x 12ga2 (Sch 10) 3/4 x 14ga x 11ga 1” OD x 12ga3/4 (Schx10)14ga 2-3/8” OD x 11ga2 x 11ga 1 x 14ga 2-3/8 x 14ga 1-7/8 (1.900) x 1-1/4 14ga x 11ga 1-1/4” OD x 11ga1 x 14ga 5” OD x 3/16” 1 x 12ga (Sch 10) (.187) 2-3/8 11ga 1-5/16 (1.315) x 2-3/8 14ga x x14ga 1-1/4 x 11ga 1-5/16” OD (1.315) 14ga (Sch 10) 1 xx 12ga 2-3/8 x 11ga 1-5/16 (1.315) x 11ga 1-5/16 (1.315) x 14ga 1-1/4 1-5/16” OD (1.315)xx 11ga 11ga 1-5/16 (1.315) x 11ga 1-1/2 x 11ga 1-5/16 14ga 1-1/2” OD(1.315) x 11ga x1-1/2 x 11ga 1-5/16 (1.315) x1-5/8 11ga (1.660) x 14ga 1-5/8” OD 1-5/8 (1.660)(1.660) x 14ga x 14ga 1-1/2 x1-5/8 11ga x 11ga 1-5/8 x 11ga OD x 11ga 1-5/8” 1-5/8 (1.660) x 14ga 1-3/4 x 11ga 3/8 1-3/4 x 11ga 3/8 x 11ga(1.900) x 14ga 1-5/8 x 11ga 1/2 1-3/4” OD1-7/8 11ga (1.900) x 14ga 5/81/2 (1.900) xx1-7/8 14ga 1-7/8” OD 1-3/4 Cold Rolled Hot Rolled Hot Rolled Cold Rolled 1 1 1 1 1 1 3/45/81-7/8 (1.900) x 14ga 7/8 1 3/4 7/8 1 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com
Square Tubing Square Tubing Unpainted 1/2” x 3/4” x 1/2 1” x 3/4 1” x1 1” x1 1-1/4” x1 1-1/4” 1-1/4 x 1-1/2” 1-1/4 x 1-1/2” 1-1/2 x 1-1/2 1-3/4” x 1-3/4 2” x 2 2” x2 2” x2 2” x2 2-1/2” 2-1/2 x 2-1/2” 2-1/2 x 2-1/2” 2-1/2 x 2-1/2 2-1/2” x 3 3” x 3 3” x3 3” x3 3” x 3-1/2 3-1/2” 3-1/2 x 3-1/2” x4 4” x4 4” x4 4” x4 4 4” x 5 4” x6 5” x6 6” x 6” x 16ga (.063) Unpainted 14ga (.075) x 16ga (.063) 16ga (.063) x 14ga (.075) 14ga x (.075) 16ga (.063) 11ga x (.120) 14ga (.075) 14ga x (.075) 11ga (.120) x (.120) 14ga (.075) 11ga x (.075) 11ga (.120) 14ga x (.120) 14ga (.075) 11ga x 11ga (.120) 14ga (.075) x 14ga (.075) 14ga (.075) x 14ga (.075) 11ga (.120) x 11ga (.120) 3/16” x (.188) 3/16 (.188) 1/4”x (.250) 1/4 (.250) 14ga x (.075) 14ga (.075) x (.120) 11ga (.120) 11ga x (.188) 3/16 (.188) 3/16” 1/4 (.250) 1/4”x (.250) x 14ga (.075) 14ga (.075) x 11ga (.120) 11ga (.120) x 3/16 (.188) 3/16” x (.188) 1/4 (.250) 1/4”x (.250) 3/16 (.188) 3/16” x (.188) 1/4 (.250) 14ga (.075) 1/4”x (.250) x (.075) 11ga (.120) 14ga x (.120) 3/16 (.188) 11ga x 1/4 (.250) 3/16” (.188) x 3/8 (.375) 1/4” (.250) x 1/4 (.250) 3/8”x (.375) 3/16 (.188) 1/4”x (.250) 1/4 (.250) 3/16” (.188) 1/4” (.250) Painted 1/2” x 3/4” x 1/2 1” x 1-1/4” 3/4x 1-1/2” 1 x 2” 1-1/4 x 2” 1-1/2 x 2-1/2” 2 x 3” 2x 3” 2-1/2 x 3” x 3 4” x 3 4” x 4 4” x 4 16ga (.063) Painted 14ga (.075) x (.075) 16ga (.063) 14ga x (.075) 14ga (.075) 14ga x (.075) 14ga (.075) 14ga x (.075) 14ga (.075) 14ga 11ga x (.120) 14ga (.075) 14ga x (.075) 14ga (.075) 14ga x (.075) 11ga (.120) 11ga (.120) x 14ga (.075) 3/16” (.188) x 14ga (.075) 14ga (.075) x 11ga (.120) 11ga (.120) x 14ga (.075) 3/16” (.188) x 11ga (.120) Galvanized x 14ga (.075) Galvanized4 11ga (.120) 4” x 4 14gax(.075) 4” x 11ga (.120) 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com 9
ural Pipe 90’s OD Pipe Caps Fencing Components 1 OD OD OD OD Fencing Components Structural Pipe 90s 1-5/16” OD Structural Pipe 90’s 1-5/8” OD 1 5/16” OD 1-7/8” OD 1 5/8” OD 2-3/8” OD 1 7/8” OD 2-7/8” OD 2 3/8” OD 3-1/2” OD 2 7/8” OD 4-1/2” OD 3 1/2” OD 1 5/16” OD 4 1/2” 1OD 5-1/2” OD 5/8” OD 5 1/2
Phillips Welding Supply Steel & Pipe Sales 1822 Fort Worth Highway Weatherford, Texas (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 Phillips Welding Supply, Inc. Steel & Pipe Sales 1822 Fort Worth Highway Weatherford, Texas 76086 (817) 596-0450 Fax (817) 596-0742 Toll Free (800) 281-7933 sales@phillipsweldingsupply.com
6.3 Mechanised/automatic welding 114 6.4 TIG spot and plug welding 115 7 MIG welding 116 7.1 Introduction 116 7.2 Process principles 116 7.3 Welding consumables 130 7.4 Welding procedures and techniques 135 7.5 Mechanised and robotic welding 141 7.6 Mechanised electro-gas welding 143 7.7 MIG spot welding 144 8 Other welding processes 147 8.1 .
Gas tungsten arc welding machine operates with dc supply for steel welding and operates with 150Hz rectangular wave ac supply for aluminium welding to avoid oxidation and better welding quality. Welding power supply has constant current or constant voltage operation. This paper deals with constant voltage welding power supply.
seam butt welding resistance butt welding flash butt welding resistance butt welding shielded unshielded other process plasma laser resistance butt welding inert gas welding submerged arc welding atomic hydrogen shielded metal arc welding (coated electrode) esepl w w w . e u r e k a e l e c t r o d e s .
the welding processes most often used in today's industry including plasma arc cutting, oxyfuel gas cutting and welding, Gas Metal Arc Welding (GMAW), Flux-Cored Arc Welding (FCAW), Shielded Metal Arc Welding (SMAW), and Gas Tungsten Arc Welding (GTAW). Flat welding positions and basic joints will be practiced. Pipe and tube welding
3. Classification of Underwater Welding Underwater welding may be divided into two main types: a) Wet welding b) Dry welding Fig. 3.1 Classification of underwater welding 3.1 Wet welding 3.1.1. Wet welding with coated electrode Wet welding is performed at ambient pressure with the welder-diver in the water and no physical barrier
There are numerous welding processes including arc welding, electron beam welding, friction welding, laser welding, and resistance welding. This article will concentrate on arc welding, which is the most common technique used to join most steels. Factors affecting weld quality will be discussed and how to avoid common weld defects will be .
10.6 Braze-welding 460 Exercises 466 11 Joining processes (welding) 467 11.1 Fusion welding 468 11.2 Oxy-acetylene welding 468 11.3 Manual metal-arc welding 490 11.4 Workshop testing of welds 504 11.5 Miscellaneous fusion welding processes 506 11.6 Workholding devices for fusion welding 509 11.7 Resistance welding 515
characterization of automotive disc brake, Applied Thermal Engineering (2014), doi: 10.1016/ j.applthermaleng.2014.10.001. This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is .
