Belt Conveyor System - Izumi International
8 The Just-In-Time Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery, design and assembly. An important contributor to this is the fact that the Belt Conveyor System is seamlessly integrated into the Modular Automation System. Advantages like these, as well as great product variety, maximum technical excellence and enormous potential to save time and money in design and assembly, are what makes Robotunits so unique. Special designs are available upon request. Impressive delivery times production time for your individual Belt Conveyor: 1 week Just-In-Time delivery Custom-made sizes select any standard frame width between 40 mm and 1200 mm select any conveyor length up to 12 m, longer units available upon request pre-assembled and height adjustable legs as an option fast adjustments to meet your individual requirements Flexibility in drive options and positions choose drive option and position of motor maintenance-free timing belt drive space saving direct drive Speed standard speed ranges from 2.6 m/min to 58 m/min higher speeds available upon request Speed Controller optional Idler options roller diameters of 40 mm, 50 mm or 80 mm nose bar (16 mm diameter) for transfer of small parts Wide variety of belts accumulation belt low & high friction belts high durability belts for abrasive and corrosive use Fully integrated conveyor system compatible with all our extrusion sizes frame built with standard extrusion system accessible T-slot on 3 sides of the conveyor frame this makes it quick and easy to attach accessories or structural elements (i.e. stops) to the machine frame Save time, cut cost shortest lead time quick configuration of your custom conveyor every Belt Conveyor comes fully assembled and tested outstanding price/performance ratio Safety self-adjusting safety guard between the Belt Conveyor roll and the slider bed timing belt guard with window for visual inspection complete documentation meeting the latest Machinery Directive
9
10
11 The Just-In-Time Belt Conveyor System Belt Conveyors C4N Belt Conveyors Page 14 C5N Belt Conveyors Page 16 Page 12 C8N Belt Conveyors Page 18 C4F Conveyor Stand Page 20 Modular Belt Conveyors C8M Modular Belt Conveyors Page 24 C8M Modular Belt Conveyors Curved Page 26 Page 22 C8F Conveyor Stand Page 21 Timing Belt Conveyors C4T Timing Belt Conveyors Page 30 C8T Timing Belt Conveyors Page 32 C8F Conveyor Stand Page 21 Page 28 C4G Conveyor Stand Page 34 C8G Conveyor Stand Page 35 Conveyor Request Form Page 37 Belt Conveyor Accessory Overview Page 122
12 C4N Belt Conveyor Drive Options ➋ ➊ ➍ ➌ ➊ ➋ ➌ ➍ Front end timing belt drive (page 14) Front end direct drive (page 15) Center drive with timing belt (page 15) Nose bar (page 14/15) C5N Belt Conveyor Drive Options ➋ ➊ ➌ ➍ ➊ ➋ ➌ ➍ Front end timing belt drive (page 16) Front end direct drive (page 17) Center drive with timing belt (page 17) Nose bar (page 16/17)
13 C8N Belt Conveyor Drive Options ➋ ➊ ➌ ➍ ➊ ➋ ➌ ➍ Front end timing belt drive (page 18) Front end direct drive (page 19) Center drive with timing belt (page 19) Nose bar (page 18/19)
14 Belt Conveyor Application Used for a wide variety of conveying applications A Technical Data Belt speed for belt drive ranges from 2.6 m/min to 55 m/min Belt speed for direct drive ranges from 2.6 m/min to 30 m/min B 40 C4N frame width 11 C4N with side guides frame width 120mm: belt width frame width - 15mm frame width 120mm: belt width frame width - 20mm Drive power depending on belt speed and load ranging from 0.12 kW to 0.37 kW (230/400V; 50/60Hz; IP55) Max. total load of material to be conveyed Fmax. 300 N - 2400 N C4N without side guides belt width frame width - 10mm Belt Type low friction, high friction, accumulation, food grade, cut & oil resistant, cleated for incline transport, integrated belt side guides, etc. A B 10 11 17 Drive Options1) Front End Timing Belt Drive Center Drive With Timing Belt2) Front End Direct Drive A Front end timing belt drive, left E Front end direct drive, left K Center drive with timing belt B Front end timing belt drive, right F Front end direct drive, right L Center drive with timing belt and tail end nose bar C Front end timing belt drive, left, tail end nose bar G Front end direct drive, left, with tail end nose bar N Center drive with timing belt and tail end nose bar D Front end timing belt drive, right, tail end nose bar H Front end direct drive, right, with tail end nose bar Q Center drive with timing belt and nose bar on both ends Front End Timing Belt Drive 95 max. Ø140 min. 15 max. 280 50 Ø 16 length 40 45 110 max. 320 max. 425 (with forced cooling fan) 1) Standard direction is pulling 2) Simply reverse the polarity to change the running direction of any center drive 150 frame width 20-80 40 frame width 60 max. 140 belt width Optional: nose bar
15 Front End Direct Drive frame width 20-80 40 frame width belt width Optional: nose bar max. Ø140 max. 220 30 50 max. 200 Ø 16 25 length 40 45 110 150 max. 310 max. 415 (with forced cooling fan) Center Drive With Timing Belt frame width 20-80 40 frame width 60 10 max. 140 belt width Optional: nose bar 40 max. Ø140 110 max. 330 50 Ø 16 length 150 45 150 max. 450 max. 555 (with forced cooling fan) Standard Widths And Lengths Description Belt Conveyor 40 Belt Conveyor 40 Belt Conveyor 40 Belt Conveyor 40 Belt Conveyor 40 Belt Conveyor 40 Belt Conveyor 40 Belt Conveyor 40 Frame Width 40 mm 80 mm 120 mm 160 mm 200 mm 240 mm 300 mm 400 mm F max.3) 300 N 700 N 1100 N 1500 N 1900 N 2300 N 2400 N 2400 N Design Options side view Standard lengths up to 12000 mm, special widths and special lengths are available upon request. Please note the minimum length to width ratio of 1.5:1. Order Placement To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Configuration Tool at www.robotunits.com 3) Approximate value: F max may vary depending on the application
16 C5N Belt Conveyor Application Used for a wide variety of conveying applications B 50 A Technical Data Belt speed for belt drive ranges from 3.2 m/min to 66 m/min Belt speed for direct drive ranges from 3 m/min to 37 m/min 16 frame width C5N with side guides belt width frame width - 20mm C5N without side guides belt width frame width - 12mm Drive power depending on belt speed and load ranging from 0.12 kW to 0.37 kW (230/400V; 50/60Hz; IP55) Max. total load of material to be conveyed Fmax. 3000 N - 3400 N 15 A B Belt Type low friction, high friction, accumulation, food grade, cut & oil resistant, cleated for incline transport, integrated belt side guides, etc. 16 22 Drive Options1) Front End Timing Belt Drive Center Drive With Timing Belt2) Front End Direct Drive A Front end timing belt drive, left E Front end direct drive, left K Center drive with timing belt B Front end timing belt drive, right F Front end direct drive, right L Center drive with timing belt and tail end nose bar C Front end timing belt drive, left, tail end nose bar G Front end direct drive, left, with tail end nose bar N Center drive with timing belt and tail end nose bar D Front end timing belt drive, right, tail end nose bar H Front end direct drive, right, with tail end nose bar Q Center drive with timing belt and nose bar on both ends Front End Timing Belt Drive 20-80 40 95 60 min. 15 40 42 160 205 max. 320 max. 425 (with forced cooling fan) max. Ø140 max. 290 Ø 16 length 1) Standard direction is pulling 2) Simply reverse the polarity to change the running direction of any center drive frame width frame width 65 max. 140 belt width Optional: nose bar
17 Front End Direct Drive frame width 20-80 40 frame width belt width Optional: nose bar max. Ø140 max. 220 25 Ø 16 60 max. 200 20 length 40 42 160 205 max. 310 max. 415 (with forced cooling fan) Center Drive With Timing Belt frame width 20-80 40 frame width 15 65 max. 140 belt width Optional: nose bar 40 max. Ø140 160 max. 410 60 Ø 16 length 178 42 205 max. 465 max. 570 (with forced cooling fan) Standard Widths And Lengths Description Belt conveyor 50 Belt conveyor 50 Belt conveyor 50 Frame Width 400 mm 500 mm 600 mm F max.3) 3000 N 3400 N 3000 N Design Options Side view Standard lengths up to 12000 mm, special widths and special lengths are available upon request. Please note the minimum length to width ratio of 1.5:1. Order Placement To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Configuration Tool at www.robotunits.com 3) Approximate value: F max may vary depending on the application Diagram dimensions in mm
18 C8N Belt Conveyor Application Used for a wide variety of conveying applications B 80 A Technical Data Belt speed for belt drive ranges from 5 m/min to 67 m/min Belt speed for direct drive ranges from 4.7 m/min to 56 m/min frame width 18.5 C8N with side guides belt width frame width - 20mm C8N without side guides belt width frame width - 12mm Drive power depending on belt speed and load ranging from 0.25 kW to 0.55 kW (230/400V; 50/60Hz; IP55) Max. total load of material to be conveyed Fmax. 3600 N - 8000 N A B Belt Type low friction, high friction, accumulation, food grade, cut & oil resistant, cleated for incline transport, integrated belt side guides, etc. 17.5 18.5 24 Drive Options1) Front End Timing Belt Drive Center Drive With Timing Belt2) Front End Direct Drive A Front end timing belt drive, left E Front end direct drive, left K Center drive with timing belt B Front end timing belt drive, right F Front end direct drive, right L Center drive with timing belt and tail end nose bar C Front end timing belt drive, left, tail end nose bar G Front end direct drive, left, tail end nose bar N Center drive with timing belt and tail end nose bar D Front end timing belt drive, right, tail end nose bar H Front end direct drive, right, tail end nose bar Q Center drive with timing belt and nose bar on both ends 165 R1 6 90 min.25 45 max. 400 max. 505 (with forced cooling fan) 22 227 max. Ø 140 max. 340 length 1) Standard direction is pulling 2) Simply reverse the polarity to change the running direction of any center drive 245 frame width 40 frame width belt width 70 max. 160 20-80 Optional: nose bar Front End Timing Belt Drive
19 frame width 40 frame width belt width max. Ø 140 max. 190 20-80 Optional: nose bar Front End Direct Drive R1 6 90 max. 230 20 length 45 22 227 245 max. 360 max. 460 (with forced cooling fan) Center Drive With Timing Belt frame width 20-80 40 frame width 70 18 max. 160 belt width Optional: nose bar R1 6 length 45 max. Ø 140 227 max. 600 90 275 22 245 max. 550 max. 655 (with forced cooling fan) Standard Widths And Lengths Description Belt Conveyor 80 Belt Conveyor 80 Belt Conveyor 80 Belt Conveyor 80 Belt Conveyor 80 Frame Width 600 mm 700 mm 800 mm 1000 mm 1200 mm F max.3) 6000 N 7000 N 8000 N 5000 N 3600 N Design Options Side view Standard lengths up to 12000 mm, special widths and special lengths are available upon request. Please note the minimum length to width ratio of 1.5:1. Order Placement To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Configuration Tool at www.robotunits.com 3) Approximate value: F max may vary depending on the application Diagram dimensions in mm
20 C4F Conveyor Stand Application Stand for C4N and C5N Support distance Technical Data Material: EN AW-6063-T66 clear anodized aluminum; galvanized GD-Zn; galvanized steel; PA 6 composite or rubber 320 320 200 Höhe 40 max. 1800 over 1800 with additional vertical support Scope of Delivery Conveyor stand, completely assembled length Standard Conveyor Stands I R 40 frame width max. 600 height S Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm Swivel Castors with brakes CAS 3080 200 Leveling Bases BAS 4008 Height adjustment - 10 / 20 mm Wide Conveyor Stands G 40 Leveling Bases BAS 4008 Height adjustment - 10 / 20 mm Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm Swivel Castors with brakes CAS 3080 frame width max. 600 min. 100 Wide conveyor stand offers additional stability when conveyor height exceed 3 times the frame width. 200 J height H width Order Code Description Conveyor Stand C4F Frame Width 1) Please complete the order code by adding the corresponding parameters for order processing Drawing dimensions in mm Order Code1) Type NN Length Height
21 Conveyor Stand Application Stand for C8N and C8M Support distance Technical Data Material: EN AW-6063-T66 clear anodized aluminum; galvanized GD-Zn; galvanized steel; PA 6 composite or rubber height 430 200 C8F Scope of Delivery Conveyor stand, completely assembled 430 80 over 1800 with additional vertical support length Standard Conveyor Stands I R 40 frame width height S Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm Swivel Castors with brakes CAS 3080 200 Leveling Bases BAS 1020 Height adjustment - 30 / 20 mm Wide Conveyor Stands J G 40 frame width max. 2020 Leveling Bases BAS 1020 Height adjustment - 30 / 20 mm Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm Swivel Castors with brakes CAS 3080 Wide conveyor stand offers additional stability when conveyor height exceed 3 times the frame width. 200 height H width Order Code Description Conveyor Stand C8F Frame Width 1) Please complete the order code by adding the corresponding parameters for order processing Drawing dimensions in mm Order Code1) Type NN Length Height
22 C8M Modular Belt Conveyor Drive Options ➊ ➋ ➊ ➋ Front end direct drive, left (page 25) Front end timing belt drive, left (page 24)
23 C8M Curved Modular Belt Conveyor Drive Options ➊ ➋ ➊ ➋ Front end direct drive, left (page 27) Front end timing belt drive, left (page 26)
24 C8M Modular Belt Conveyor 10 1 Application Used for a wide variety of conveying applications 80 122 Technical Data Belt speed for belt drive ranges from 6 m/min to 50 m/min Belt speed for direct drive ranges from 6 m/min to 50 m/min Drive power depending on belt speed and load ranging from 0.25 kW to 0.55 kW (230/400V; 50/60Hz; IP55) Maximum load to be conveyed: 8000 N Modular belt pitch: 1 inch modular belt width (MB) frame width (FW) 10 FW MB 15 (FW 1500) FW MB 15 bis 20 (FW 1500) Modular belt design Modular belt open Modular belt closed Drive Options1) Front End Timing Belt Drive Front End Direct Drive A Front end timing belt drive, left E Front end direct drive, left B Front end timing belt drive, right F Front end direct drive, right Front End Timing Belt Drive max. 175 max. Ø 140 65 frame width modular belt width length 213 min. 5 215 max. 400 max. 505 (with forced cooling fan) max. 355 max. 280 159 199 259 max. 1000 165
25 Front End Direct Drive max. 230 10 max. 280 159 199 259 max. 1000 max. 190 max. Ø 140 modular belt width frame width length max. 360 215 max. 460 (with forced cooling fan) Design Options2) Side view Length And Frame Width Description C8M Front end timing belt drive C8M Front end direct drive Min. length3) Max. length3) 1500 mm 12000 mm 1500 mm 12000 mm Min. modular belt width4) 150 mm 150 mm Max. modular belt width4) 2000 mm 2000 mm Order Placement To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Configuration Tool at www.robotunits.com 1) Standard direction is pulling 2) Optional designs upon request 3) Special lengths are available upon request 4) Modular band widths can be ordered ranging from min. 150 mm to max. 2000 mm in steps of 50 mm. Diagram dimensions in mm
26 C8M Curved Modular Belt Conveyors Application Used for a wide variety of conveying applications 10 usable width modular belt width - 24mm 80 135 12.7 Technical Data Belt speed for belt drive ranges from 6 m/min to 30 m/min Belt speed for direct drive ranges from 6 m/min to 30 m/min Drive power depending on belt speed and load ranging from 0.25 kW to 0.55 kW (230/400V; 50/60Hz; IP55) Maximum load to be conveyed: on request Modular belt pitch: 1 inch modular belt width Modular belt design Modular belt open frame width modular belt width 15mm Drive Options1) Front End Timing Belt Drive Front End Direct Drive A Front end timing belt drive, left E Front end direct drive, left B Front end timing belt drive, right F Front end direct drive, right Front End Timing Belt Drive 165 65 max. Ø 140 max. 175 out-feed length (min. modular belt width) 213 max. 365 214 173 213 max. 280 min. 5 in-feed length (min. modular belt width) cu rv e an g le curve radius max. 400 modular belt width frame width 1) Standard direction is pulling max. 505 (with forced cooling fan)
27 Front End Direct Drive max. Ø 140 max. 190 out-feed length (min. modular belt width) max. 460 (with forced cooling fan) 215 173 213 5 max. 280 max. 235 in-feed length (min. modular belt width) cu r ve an gl e curve radius max. 360 modular belt width frame width Design Options2) Side view Top view Frame Width Description C8M Front end timing belt drive C8M Front end direct drive Frame width min.3) 215 mm 215 mm Frame width max.3) 1215 mm 1215 mm Order Placement To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Configuration Tool at www.robotunits.com 2) Optional designs upon request 3) Frame widths can be ordered ranging from min. 215 mm to max. 1215 mm in steps of 50 mm. Diagram dimensions in mm
28 C4T Timing Belt Conveyor Drive And Connection Options ➍ ➋ ➌ ➋ ➊ ➊ ➋ ➌ ➍ Front end timing belt drive, right, with output shaft (page 30) Connection shaft with coupling COL 5220 (page 157) Timing belt lane without motor, output shaft, right (page 30) Timing belt lane without motor, with output shaft, right (page 30)
29 C8T Timing Belt Conveyor Drive And Connection Options ➏ ➐ ➎ ➍ ➌ ➋ ➊ ➊ ➋ ➌ ➍ ➎ ➏ ➐ Front end direct drive, right, with output shaft (page 32) Front end timing belt drive, right, with output shaft (page 32) Connection shaft with coupling COL 5240 (page 157) Timing belt lane without motor, with output shaft on both sides (page 32) Connection Hub COP 4501 (page 125) Splined Shaft COL 8500 (page 125) Timing belt lane without motor, with splined shaft hub (page 32)
30 C4T Timing Belt Conveyor Application Used for a wide variety of conveying applications F max Technical Data Speeds of 2.75 m/min to 56 m/min 46 Drive power depending on belt speed and load ranging from 0.12 kW to 0.37 kW (230/400V; 50/60Hz; IP55) Max. total load of material to be conveyed Fmax. 1600 N Pulley Number of teeth per pulley 30 Pitch circle diameter 47.75 mm 40 50 belt width 32 mm 8.5 57 Belt Type Standard application, cleated for incline transport, accumulation, etc. Drive Options1) Front End Timing Belt Drive Timing Belt Lane Without Motor Front End Timing Belt Drive, Double Lane A Front end timing belt drive, left T Timing belt lane with output shaft on both sides O 2 Front end timing belt drive, left, double lane B Front end timing belt drive, right U Timing belt lane with output shaft, left P 2 Front end timing belt drive, right, double lane O Front end timing belt drive, left and output shaft V Timing belt lane with output shaft, right P Front end timing belt drive, right and output shaft Front End Timing Belt Drive max. Ø140 max. 280 min. 15 50 length max. 320 max. 425 (with forced cooling fan) 40 135 Front End Timing Belt Drive, Triple Lane O 3 Front end timing belt drive, left, triple lane P 3 Front end timing belt drive, right, triple lane
31 106.5 24 (130.5) frame width 40 mm belt width 32 mm O/P 60 max. 140 max. 100 Front End Timing Belt Drive Ø 12 h8 25 95 57 (81) 24 MA1 C4T frame width 40mm belt width 32 mm U/V Ø 12 h8 25 60 max. 140 max. 100 Front End Timing Belt Drive, Double Lane 95 Front End Timing Belt Drive, Triple Lane 57 (105) 24 MA2 C4T 24 T Ø 12 h8 MA1 C4T belt width 32 mm frame width 40mm 60 max. 140 max. 100 25 95 Length And Frame Width Description Timing Belt Conveyor 40 Front end timing belt drive Timing Belt Conveyor 40 Front end timing belt drive, double lane Timing Belt Conveyor 40 Front end timing belt drive, triple lane Timing Belt Conveyor 40 Timing belt lane without motor Min. length 400 mm 400 mm 400 mm 400 mm Max. length 12000 mm 12000 mm 12000 mm 12000 mm MA1 MA2 Order Placement To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Configuration Tool at www.robotunits.com 1) Standard direction is pulling Diagram dimensions in mm
32 C8T Timing Belt Conveyor Application Used for a wide variety of conveying applications F max belt width 32mm 99 Drive power depending on belt speed and load ranging from 0.25 kW to 0.37 kW (230/400V; 50/60Hz; IP55) Max. total load of material to be conveyed Fmax. 4000 N or 6000 N, depending on type of drive Pulley Number of teeth per pulley 32 Pitch circle diameter 101.85 mm Belt Type Standard application, cleated for incline transport, accumulation, etc. Drive Options1) Front End Timing Belt Drive, Fmax 4000 N A Front End Direct Drive, Fmax 6000 N 40 104 Technical Data Speeds of 6 m/min to 63 m/min 17.5 75 Front End Drive, Double Lane O 2 Front end timing belt drive, left, double lane P 2 Front end timing belt drive, right, double lane R 2 Front end direct drive, left, double lane S 2 Front end direct drive, right, double lane Front end timing belt drive, left E B Front end timing belt drive, right F Front end direct drive, right O Front end timing belt drive, left and output shaft R Front end direct drive, left and output shaft O 3 Front end timing belt drive, left, triple lane Front end timing belt drive, right and output shaft S Front end direct drive, right and output shaft P 3 Front end timing belt drive, right, triple lane R 3 Front end direct drive, left, triple lane S 3 Front end direct drive, right, triple lane Front end direct drive, left Front End Drive, Triple Lane P Front End Timing Belt Drive 104 max. Ø 140 min. 20 max. 350 length 45 234 Timing Belt Lane Without Motor max. 400 max. 505 (with forced cooling fan) T Timing belt lane with output shaft on both sides U Timing belt lane with output shaft, left V Timing belt lane with output shaft, right Front End Direct Drive 104 max. 230 10 length 45 max. 360 max. 460 (with forced cooling fan) Timing Belt Lane Without Motor, Adjustable 234 W Timing belt lane with splined shaft hub
33 40.5 Ø 20 h9 (164) 123.5 frame width 40 mm 75 (115.5) 40.5 MA1 C8T belt width 32 mm frame width 40 mm max. 120 70 max. 160 O/P 52 U/V MA2 C8T 70 max. 160 75 belt width 32 mm max. 120 Front EndTiming Belt Drive, Double-,Triple Lane 40.5 T Ø 20 h9 52 52 Ø 20 h9 40.5 Ø 20 h9 MA1 C8T (max. 290) 52 max. 250 40.5 R/S W, adjustable 75 max. Ø140 max. 190 belt width 32 mm frame width 40 mm MA2 C8T frame width 40 mm belt width 32 mm max. Ø140 max. 190 Front End Direct, Double Lane, Triple Lane 75 (156) 165 Splined shaft hub DIN ISO 14-6x16x20 Length And Frame Width Description Timing belt conveyor 80 Front end timing belt drive Timing belt conveyor 80 Front end timing belt drive, double lane Timing belt conveyor 80 Front end timing belt drive, triple lane Timing belt conveyor 80 Front end direct drive Timing Belt Conveyor 80 Front end direct drive, double lane Timing Belt Conveyor 80 Front end direct drive, triple lane Timing Belt Conveyor 80 Timing belt lane without motor Min. length 550 mm 550 mm 550 mm 550 mm 550 mm 550 mm 550 mm Max. length 12000 mm 12000 mm 12000 mm 12000 mm 12000 mm 12000 mm 12000 mm MA1 MA2 Order Placement To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Configuration Tool at www.robotunits.com 1) Standard direction is pulling, Diagram dimensions in mm
34 Conveyor Stand Support distance Technical Data Material: EN AW-6063-T66 clear anodized aluminum; galvanized GD-Zn; galvanized steel; PA 6 composite or rubber Scope of Delivery Conveyor stand, completely assembled 320 40 200 Application Stand for C4T 320 height C4G over 1800 with additional vertical support length Stand Types: Single Lane 200 40 I R Safety Fence Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm height/3 200 Swivel Castors with brakes CAS 3080 height S Leveling Bases BAS 4008 Height adjustment - 10 / 20 mm MA1 - 40 Stand Types: Double Lane 200 40 G Swivel Castors with brakes CAS 3080 height/3 or MA1 40 (upper value) height J Safety Fence Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm 200 H Leveling Bases BAS 4008 Height adjustment - 10 / 20 mm Stand Types: Triple Lane MA2 - 40 MA1 200 40 M Swivel Castors with brakes CAS 3080 height/3 or MA1 MA2 40 (upper value) height L Safety Fence Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm 200 K Leveling Bases BAS 4008 Height adjustment - 10 / 20 mm Order Code Description Conveyor Stand C4G Width 1) Please complete the order code by adding the corresponding parameters for order processing Diagram dimensions in mm Order Code1) Type NN Length Height
35 Conveyor Stand Support distance Technical Data Material: EN AW-6063-T66 clear anodized aluminum; galvanized GD-Zn; galvanized steel; PA 6 composite or rubber Scope of Delivery Conveyor stand, completely assembled 430 80 200 Application Stand for C8T 430 height C8G over 1800 with additional vertical support length 40 I R Safety Fence Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm height/3 200 Swivel Castors with brakes CAS 3080 height S Leveling Bases BAS 1020 Height adjustment - 30 / 20 mm 200 Stand Types: Single Lane MA1 - 40 Stand Types: Double Lane 200 40 J G Swivel Castors with brakes CAS 3080 height/3 or MA1 40 (upper value) 200 Safety Fence Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm height H Leveling Bases BAS 1020 Height adjustment - 30 / 20 mm Stand Types: Triple Lane 40 MA2 - 40 200 MA1 M Swivel Castors with brakes CAS 3080 height/3 or MA1 MA2 40 (upper value) height L Safety Fence Floor Brackets for anchoring BAP 2051 Height adjustment - 20 / 5 mm 200 K Leveling Bases BAS 1020 Height adjustment - 30 / 20 mm Order Code Description Conveyor Stand C8G Width 1) Please complete the order code by adding the corresponding parameters for order processing Diagram dimensions in mm Order Code1) Type NN Length Height
36 Belt Conveyor Application Examples
37 Conveyor Request Form Company: Contact Person: Date: Telephone: Fax: L Quantity: . piece(s) A layout diagram is required for curved conveyors. Width: . mm Length: . mm B Drive Options: See Catalog Pages 14 to 32 (enter letter) . H Side Guides: H . mm Belt Speed: V . m/min Frequency Converter: Yes Variable Speed: Yes No . to . m/min No Power Supply: Standard 230/400V, 50/60 Hz Power Supply: Special Voltage Required Yes No Yes No . V, . Hz Normal Operation Accumulation Cycle Mode Installation Orientation: horizontal Installation Orientation: inclined . Installation Orientation: downhill . Weight Per Unit: . kg Temperature Of Parts: . C Total Belt Load: . kg Part Material: . Special Belt Requirements: Parts To Be Conveyed (Layout Sketch): Motor Orientation: 90 Location Of Terminal Box: 270 180 180 0 0 90 . 270 . X Base Frame: X . mm X Max. Approved Belt Sag: X . mm
To place an order please use the Conveyor Request Form (page 37) or visit the online Belt Conveyor Confi guration Tool at www.robotunits.com Description Frame Width F max. 3) Belt Conveyor 40 40 mm 300 N Belt Conveyor 40 80 mm 700 N Belt Conveyor 40 120 mm 1100 N Belt Conveyor 40 160 mm 1500 N Belt Conveyor 40 200 mm 1900 N Belt Conveyor 40 .
Plate Conveyor Belt Plate conveyor belt can be divided into three types: chain, perforated and convex plate conveyor belt. Chain plate conveyor belt can be made into L-shaped, U-shaped or rectangular according to the requirement of space. The holes on the surface of perforated plate conveyor belt with good heat dissipation function.
A belt conveyor is a conveyor in which the product rides directly on the belt. The belt is supported by either a roller bed conveyor section or a slider bed conveyor section. This manual will explain the various types of Mathews' belt conveyors. This manual describes the following types of belt conveyors: 1. Horizontal Belt Conveyors 2.
This manual contains the instructions to properly thread the NBC belt, use with MHS Conveyor NBC flat belt conveyor. These instructions use the MHS Conveyor Nitta belt and direct the user to the link for MHS Conveyor Nitta belt welding instruction. MHS Conveyor recommends reviewing the links included in this manual for more details to belt .
A conveyor belt is in simple terms the carrying medium of a conveyor belt system that generally consists of two or more pulleys with an endless gear system attached to the carrying medium. One set of pulleys is located in the front of the conveyor belt system while the other set of pulleys is usually placed at the end of a conveyor belt system.
belt) and a rigid body (roller, roller system, etc.), such as a belt conveyor. In this paper, a flexible multibody dynamic model of a conveyor belt is established based on the RFE method. The model is used to study the dynamic performance of the conveyor under different starting modes. 2. Rigid Finite Element Model of a Conveyor Belt 2.1.
Conveyor belt Hole / rip FIX'N GO screws LEGEND 50 cm 50 cm 50 cm 50 cm BELT 1 BELT 2 Longitudinal rip Crosswise rips under 50% of the belt width On each side, you must have 20% of the belt width Belt edge damage under 20% of the belt width Hole up to 10 cm wide in the edge of the belt (more than 3 cm : the hole before with a piece of used .
Static Brush Conveyor Belt Cleaner 6 06/07/2020 SECTION 2 – INTRODUCTION The ESS Static Brush Conveyor Belt Cleaner is designed to remove adhering material from the return side of a conveyor belt. The Static Brush Conveyor Belt Cleaner is suitable for fine and dry powdery materials which are often difficult to scrape from the
Abrasive Water Jet Processes . Water Jet Machining (invented 1970) A waterjet consists of a pressurized jet of water exiting a small orifice at extreme velocity. Used to cut soft materials such as foam, rubber, cloth, paper, food products, etc . Typically, the inlet water is supplied at ultra-high pressure -- between 20,000 psi and 60,000 psi. The jewel is the orifice in which .
