Catalogue Complet EN - SPC TOOLING
CATALOG TOOLING SPC Tooling Sàrl Route de Boudry 22A Box 68 CH-2016 Cortaillod Tel. 41 32 841 44 00 www.spc-tooling.ch info@spc-tooling.ch
In case of order, and to avoid any manufacturing errors, please specify: Article number Feed rollers: In bronze (threaded) In steel (standard) In cast iron (on request) Sanded (on request) Guide bush D2: Possibility of having adjustable guide bush. Collet and counter-collet: The clamping diameter The clamping length for counter collet if not standard. The diameter of passage and the clamping length for large openings. Counter-collets with nose and specials counter-collets (provide drawing or drawing of the part). Possibility to produce most of hard metal counter collets. Straightening: Possibility of having blank bushes in plastic (to be drilled by yourself according to diameter) Tools D2 - D6 - NM: Design and manufacturing (provide drawing or part drawing to be machined). Various surface treatments available according to material to be machined Cams: Cams design for machines D2- D4 - D5 - D6 (provide drawing of the part). Cams manufacture in cast iron or steel with ou without hardening. Supply of complete tools including drills, holder, mills, knurling tool, Refurbishing: Toolheads D2 - D2H - D2-CNC - D6 Revolver D4 - D5 - D6 Spare parts: On request www.spc-tooling.ch info@spc-tooling .ch 1
Feed r oller s from ø 0.20 to ø 5.00 "V" D 2 -P -1 5 7 4 -1 from ø 0.20 to ø 5.00 "U" D 2 - P -1 5 7 4 - 4 Threaded D2-P-157 D21574-6 Use: D2 - D2 FLEX F SPEED EED - D4 - D5 G u i de bu s h D 2 from ø 0.20 to ø 0 0.50 50 D 2 -P - M 2 4 from ø 0.51 to ø 1.00 D 2 -P - M 2 5 from ø 1.01 to ø 5.00 D 2 -P - M 2 6 Use: D2 - D2 FLEX SPEED - D4 - D5 G u i d e b u s h D 2 - C NC from ø 0.20 to ø 0.50 D 2 - P - M 2 4 -1 from ø 0.51 to ø 1.00 D 2 - P - M 2 5 -1 from ø 1.01 to ø 3.50 D2--P-M26 D2 P-M26--4 from ø 3.51 to ø 5.00 0 D2-P-M26 D2-P M 6 -3 Use: D2-CNC - D5 D5--CNC NC Co u n te r -c o l l e t D 2 s ta n da r d from ø 0.50 to ø 1.00 0 D 2 -P - 1 5 8 8 from ø 0.50 to ø 1.00 HM D2-P-1588-1 from ø 1.01 to ø 2.50 D 2 -P - 1 5 8 9 from ø 1.01 to ø 2.50 HM D2-P-1589-1 Set up with: Collet holder Tapered sleeve D2-O-M151 D2-O-1629-1 from ø 2.51 to ø 4.00 D 2 -P - 1 5 9 0 from ø 2.51 to ø 4.00 en MD D2-P-159 P-1590-1 -1 Set up with: Collet holder Tapered sleeve from ø 4.01 to ø 5.00 D2-O-M151 D2-O-1629-2 D22 -P - 1 8 9 6 Set up with: Collet holder Tapered sleeve D2-O-M153 D2-O-1629-2 Use: D2 - D2 FLEX SPEED - D2-CNC www.spc-tooling.ch info@spc-tooling .ch 2
Co u n te r -c o l l e t D 2 wi th i n n e r tu be from ø 0.20 to ø 0.30 D 2 -P - 1 5 9 1 -2 from ø 0.31 to ø 1.50 D 2 -P - 1 5 9 1 -1 from ø 0.30 to ø 1.00 HM D2-P-1591-4 from ø 1.01 to ø 1.50 HM D2-P-1591-3 Set up with: Collet holder Tapered sleeve D2-O-M151 D2-O-1629-1 Use: D2 - D2 FLEX SPEE SPEED D - D2-CNC -CN Countte Coun er--colllet D D2 2 wi with h l a r g e o pe n i n g from ø 0.30 to ø 2.8 2.80 0 D2-P-189 D2 P 1 9 2 -9 3 Max. opening 0.70 Set up with: Collet holder Tapered sleeve from ø 0.30 to ø 4.00 D2-O-M154 D2-X-1891 D2-P-1892-1/93 Max. opening 1.50 Set up with: Collet holder Tapered sleeve D2-O-1567 D2-X-1891 Use: D2 - D2 FLEX SPEE SPEED D - D2-CNC -CN CounterCoun er-bussh D D2 2 ((witthout clamping) from ø 0.50 to ø 2.5 2.50 0 D2-P-159 D2 P 1596 Set up with: Collet holder Tapered sleeve from ø 2.51 to ø 5.00 D2-O-M151 D2-O-1629-1 D 2 -P - 1 5 9 3 Set up with: Collet holder Tapered sleeve D2-O-M151 D2-O-1629-2 Use: D2 - D2 FLEX SPEED - D2-CNC Counter-colle collet et D4 wit with h eje ejec cto r from ø 0.25 to ø 5.00 D4--P-2046 D4 P-2046-1 1 Set up with: Steady ejector or Mobile ejector Spring Stopper D4-P-2104 D4-P-2109 D4-O-2108 D4-O-2111 Use: D2-PM - D4 - D5 www.spc-tooling.ch info@spc-tooling .ch 3
Co u n te r -c o l l e t D 4 f o r e je c ti o n o f pa r t th r o u g h from ø 0.25 to ø 3.00 D 4 -P - 2 0 4 6 -1 Set up with: Inner tube Guide tube D4-P-2467 D4-P-2113 from ø 3.01 to ø 5.00 Without tube Guide tube D 4 -P - 2 0 4 6 -2 D4-P-2113 Use: D2-PM - D4 - D5 Counter unter--collet e D4 4 lar larg g e o pe n i n g a n d e je c to r from ø 0.30 to ø 4.0 4.00 D4-PD4 P - 2 56 5 Set up with: Collet holder Steady ejector or Mobile ejector Spring Stopper D4-X-M206 D4-P-2104 D4-P-2109 D4-O-2108 D4-O-2111 Use: D2-PM - D4 - D5 Counter collet D4 large opening ning for o e je c cttion of part tth h r ou gh from ø 0.30 to ø 4.00 D4-P-256 P-2565-69 -6 Set up with: Collet holder Inner tube Guide tube From ø 3.00 without tube D4-X-M206 D4-P-2569 D4-P-2113 Use: D2-PM - D4 4 - D5 Co l l e t f o r dr i l l D 4 from ø 0.50 to ø 5.00 D 4 -P - 2 2 0 6 Use: D4 - D5 Security b bu u sh from ø 0.30 to ø 5.00 D AD - M 2 Use: D2 - D4 - D5 www.spc-tooling.ch info@spc-tooling .ch 4
Ste a dy a n d f e e d c o l l e t D 6 from ø 0.30 to ø 7.00 D 6 -1 2 - 6 6 3 f r om ø 0 . 3 0 t o ø 7 . 0 0 s t r i p e d D6-12-663-STR Usage: D6S - D6SR from ø 6.35 to ø 9.00 Steady collet from ø 6.35 to ø 9.00 Feed collet D 6 -1 2 - 4 2 3 9 D6--12D6 12-4195 19 Use: D6S 9mm m - D6 D6SR R 9m 9mm G u i de bu s h D 6 from ø 0.30 to ø 3 3.99 9 D 6 -1 2 - M 3 from ø 4.00 to ø 5.49 D 6 -1 2 - M 4 from ø 5.50 to ø 6.50 D 6 -1 2 - M 5 from ø 6.51 to ø 7.10 D 6 -1 2 - M 6 Usage: D6S - D6SR from ø 6.35 to ø 9.00 D 6 -1 2 - M 4 9 6 Use: D6S 9mm - D6SR 9 9m mm Counter-co Counter o l l e t D 6 wi th e je c to r from ø 0.30 to ø 6.35 D 6 -1 2 - 1 3 5 4 from ø 6.35 to o ø 9.00 9 00 D 6 -1 2 - 1 3 5 4 - 2 Set up with: Steady ejector or Mobile ejector Spring Stopper D6-12-M143 D6-12-1356 D6-12-1357 D6-12-1355 Use: D6SR - D6SR 9mm Counter-collet D6 fo for ejec jection io of pa art th hrough oug gh from ø 0.30 to ø 3.00 D6--12 D6 12-475 475 Set up with: Inner tube Guide tube from ø 3.01 to o ø 6.35 6 5 D6-12-1735 D6-12-1624 D 6 -1 2 - 4 7 5 -1 Set up with: Without tube Guide tube www.spc-tooling.ch D6-12-1624 info@spc-tooling .ch 5
from ø 3.00 to ø 9.00 Body ø 14.00 from ø 3.00 to ø 9.00 Body ø 12.00 D 6 -1 2 - 4 7 5 -4 D 6 -1 2 - 4 7 5 -3 Use: D6S - D6SR - D6 9mm Counter-collet D6 large ope opening g wi with h eje ejec cto torr from ø 0.30 to ø 5.00 D6-12--17 1700 0 Set up with: D6-12-M143 Steady ejector or Mobile ejector Spring Stopper D6-12-1356 D6-12-1357 D6-12-1355 Use: D6SR Co u n te r -c o l l e t D 6 l a r g e o pe n i n g f o r e je c ti o n o f pa r t th r o u g h from ø 0.30 to ø 5.00 D 6 -1 2 - 1 7 0 0 Set up with: Inner tube Guide tube From ø 3.00 without tube D6-12-1735 D6-12-1624 Use: D6S - D6SR Collet ollet ffo or drillll D6 6 from ø 0.50 to ø 7.00 D6--12 D6 2-1681 68 81 Use: D6SR - NM M F e e d c o l l e t Ne w M a c h from ø 1.50 to ø 6.35 6 4 -A 1 Use: NM Material control collet New Mach from ø 0.50 to ø 1.00 from ø 1.00 to ø 1.50 from ø 1.50 to ø 2.00 from ø 2.00 to ø 2.50 from ø 2.50 to o ø 3.00 .00 from ø 3.00 to ø 3.50 from ø 3.50 to ø 4.0 4.00 0 from ø 4.00 to ø 4.50 from ø 4.50 to ø 5.00 5 0 from ø 5.00 to ø 5 5.50 5 from ø 5.50 to ø 6.00 64--A3 64 Use: NM www.spc-tooling.ch info@spc-tooling .ch 6
G u i d e b u s h Ne w M a c h from ø 0.50 to ø 3.00 3 21 - 0 17 2 from ø 3.01 to ø 6.50 From ø 4.60 without tube 3 21 - 0 17 3 Use: NM Counter-collet New Mach fo forr eje ejec ction off p parrt thro throu u gh from ø 0.30 to ø 3.00 121 12 1-1481 Set up with: Inner tube de ø 3.01 à ø 6. 6.35 .35 12 21--1481 Set up with: Without tube Use: NM - D2-CNC - D5-CNC C o u n t e r - c o l l e t Ne w M a c h w i t h e j e c t o r from ø 0.30 to ø 6.35 1 21 - 1 48 5 Set up with: 306-0276 63A-554 306-0277 Mobile ejector Spring Stopper Use: NM - D2-CNC NC - D5 D5-C CNC Counter ter-col collet New M Mach ach wiith nose and ejetctor from ø 0.30 to ø 4.0 4.00 0 121 21-1485 1485-1 Set up with: 306-0276 63A-554 306-0277 Mobile ejector Spring Stopper Use: NM - D2-CNC - D5-CNC Counter-collet New Mach large opening with ejectorr from ø 0.30 to ø 5.00 1 21 - 1 48 3 Set up with: Mobile ejector Spring Stopper 306-0276 63A-554 306-0277 Use: NM - D2-CNC C - D5 D5--CNC Counter-colllet New M Counter-c Mach ach la larg g e o pe n i n g f o r e je c ti o n o f pa r t th r o u g h from ø 0.30 to ø 5.00 1 21 - 1 48 3 Set up with: Inner tube From ø 3.00 without tube Use: NM - D2-CNC - D5-CNC www.spc-tooling.ch info@spc-tooling .ch 7
C o u n t e r - c o l l e t Ne w M a c h l a r g e o p e n i n g w i t h d o u b l e c o n e from ø 0.30 to ø 5.00 Max. opening 1.50 3 21 - 1 34 4 from ø 0.30 to ø 5.00 Max. opening 1.00 3 2 1 - 1 3 4 4 -2 Set up with: Inner tube Mobile ejector Spring Stopper 306-0276 63A-554 306-0277 Use: NM - D2D2-CNC -CNC - D5-CNC 5-CNC Counter-collet C Counter er-collet New Mach with nose, large opening and double cone from ø 0.30 to ø 5.00 0 Max. opening 1.50 3 2 1 - 1 3 4 4 -1 from ø 0.30 to ø 5.00 Max. opening 1.00 3 2 1 - 1 3 4 4 -3 Set up with: Inner tube Mobile ejector Spring Stopper 306-0276 63A-554 306-0277 Use: NM - D2-C D2-CNC CNC - D5-C D5-CNC C Stra Str aightenin ning g bu s h -h o l de r a n d s tr a i g h te n i n g bu s h e s Bush-holder D 6 - 1 4 - M 2 8 0 -A 1 -3 Sold only by full set from ø 0.20 to ø 0.50 D 6 -1 4 - 2 4 6 8 - 1 from ø 0.51 to ø 1.00 D 6 -1 4 - 2 4 6 8 - 2 from ø 1.01 to ø 2.00 D 6 -1 4 - 2 4 6 8 - 3 Pr o f i l e d D6-14-2468 4-24 8 Bushes are also sold individually Use: D2 - D4 - D5 D Bush-holder D6--14-M136-A1-3 D Sold only by full set www.spc-tooling.ch info@spc-tooling .ch 8
from ø 0.20 to ø 0.50 D 6 -1 4 - 1 6 9 7 - 1 from ø 0.51 to ø 1.00 D 6 -1 4 - 1 6 9 7 - 2 from ø 1.01 to ø 2.00 D 6 -1 4 - 1 6 9 7 - 3 from ø 2.01 to ø 3.00 D 6 -1 4 - 1 6 9 7 - 4 from ø 3.01 to ø 4.00 D 6 -1 4 - 1 6 9 7 - 5 from ø 4.01 to ø 5.00 D 6 -1 4 - 1 6 9 7 - 6 Pr o f i l e d D 6 -1 4 -1 6 9 7 Bushes are also sold individually Use: D2 - D4 - D5 - D6 Bush-holder D6-14 14-M1 M104-A1-3 -A1-3 Sold only by full set from ø 3.01 to ø 4.00 D 6 -1 4 - 1 6 9 7 - 1 from ø 4.01 to ø 5.00 D 6 -1 4 - 1 6 9 7 - 2 from ø 6.01 to ø 6.80 D 6 -1 4 - 1 6 9 7 - 3 from ø 6.81 to ø 7.00 D 6 -1 4 - 1 6 9 7 - 4 from ø 5.01 to ø 6.00 D 6 -1 4 - 1 6 9 7 - 5 Pr o f i l e d D 6 -1 4 -1 6 9 7 Bushes are also sold individually Use: D6 from ø 0.50 to ø 1.00 0 121-1163 121 1163 from ø 1.01 to ø 2.00 2 121--1164 121 from ø 2.01 to ø 3.0 3.00 0 121 21-1165 1165 from ø 3.01 to ø 4.00 1 21 - 1 16 6 from ø 4.01 to o ø 5.00 5 0 1 21 - 1 16 7 from ø 5.01 to ø 6 6.00 1 21 - 1 16 8 Bushes are also sold individually Use: NM Str a i g h te n i n g ja w a n d bu s h Rotating bush Sold individually A R D - C -M 2 2 -A from ø 0.20 to ø 0.50 ARD-G-6/1-2 D-G 6/ -2 from ø 0.51 to ø 1.00 ARD-G-7/1 ARD G-7/1-2 from ø 1.01 to ø 2.00 2 ARD--G--8/1-2 ARD 12 from ø 2.01 to ø 3.0 3.00 ARD-G-9/1AR D G-9/ -2 from ø 3.01 to ø 4.00 ARD RD-G-10/1-2 from ø 4.01 to ø 5.00 5 0 ARD-G-11/1-2 from ø 5.01 to ø 6.00 ARD-G-12/1-2 Bushes are also sold individually Use: D2 - D4 - D5 - D6 www.spc-tooling.ch info@spc-tooling .ch 9
Bu sh str a igh te n in g ø 0. 5 0 ø 0. 7 0 ø 0. 9 0 ø 1. 2 0 ø 1. 5 0 ø 1. 8 0 ø 2. 2 0 ø 2. 6 0 ø 3. 3 0 ø 4. 3 0 ø 5. 3 0 A R D -G - 1 Use: D2 - D4 - D D5 5 - D6 Hy dr a u l i c s t r a i g h t e n i n g r o l l e r s D 6 from ø 5.00 to ø 9.00 D 6 - 3 -M 6 8 8 - 1 Pr o f i l e d 12 pieces required D 6 -3 -M 6 8 8 -2 from ø 5.00 to ø 9.00 D6-3-M689-1 Pr o f i l e d 2 pieces required D6--3-M68 D6 3-M689-2 9-2 Security bush sh D6-12-A290 D6-12-A A2 0 Use: D6 9mm Fe e d a tta ch m e n t A A D R a ti o 1 : 1 Max length 50.00 mm A A D -M 2 - 1 R a ti o 1 : 1 . 2 Max length 60.00 mm A A D -M 2 - 2 R a ti o 1 : 1 . 5 Max length 70.00 mm A A D -M 2 - 3 Only rack and segment Rack ratio 1:1 Segment ratio io 1:1 1 AAD 10 1 AAD-10-1 AAD--63 AAD Rack ratio 1:1.2 2 Segment ratio 1: 1:1.2 :1.2 AAD-10AAD 10-2 A A D- 6 2 Rack ratio 1:1.5 Segment ratio 1:1.5 A A D -1 0 - 3 A A D - 6 3 -3 Use: D2 - D4 - D5 www.spc-tooling.ch info@spc-tooling .ch 10
Clu tch se gm e n t Straightening 1 x 40 D 2 -X - M 1 2 7 Straightening 1 x 65 D 2 -X - M 1 2 6 Straightening 1 x 130 D 2 -X - M 2 0 4 Straightening 2 x 40 D 2 -X - M 3 7 5 Straightening 2 x 65 D 2 -X - M 1 4 1 Use: D2 - D4 - D5 Control C trol c ca am fo for straiightenin ghtening g A RD Straightening 1 x 40 ARD--H AR H-2 2 Straightening 1 x 65 65 ARD--A-83 ARD Straightening g 1 x 130 A R D -H -1 3 9 Straightening 2 x 40 40 A R D -H -1 3 4 Straightening 2 x 65 A R D -H -1 0 Use:D2 - D4 - D5 Ch a r i o t c a m f o r s tr a i g h te n i n g A RD Straightening 1 x 40 A R D -H -3 Straightening1 x 65 ARD-A-11 Straightening 1 x 130 ARD-H--14 40 Straightening 2 x 40 40 ARD-HAR D-H-13 133 Straightening 2 x 65 65 ARD--HARD H-9 Use: D2 - D4 - D5 Ca m f o l l o we r s D 2 -A -A 4 2 A A D -A 2 D 6 -1 4 - A 1 2 D4--U-2240 D4 2240 D 4 - U -2 2 4 1 Use: D2 - D4 - D5 - D6 www.spc-tooling.ch info@spc-tooling .ch 11
Se gm e n t Segment 10 D 4 - U -2 0 8 8 - 1 Segment 15 D 4 - U -2 0 8 8 - 2 Segment 20 D 4 - U -2 0 8 8 - 3 Opening counter-collet D2-PM-D4-D5 Start of revolver D4-D5-D6 Segment 10 D4-U-2362-1 -1 Segment 15 D4--U-236 D4 U-2362-2 2-2 Segment 20 D4-U-2362 D4-23 2-3 Closing counter-collet D2-PM-D4-D5-D6 Start of revolver D4-D5-D6 Segment 10 D 6 - 1 2 -1 4 7 9 -1 Segment 15 D 6 - 1 2 -1 4 7 9 -2 Segment 20 Opening counter-collet D6 D 6 - 1 2 -1 4 7 9 -3 Segment 20 D 6 - 1 2 -1 4 4 7 Material straightening (entry touch) Segment 15 D 6 - 1 2 -1 4 4 8 Material straightening (return touch) Segment 15 Stop of threading Segment 12 Start of threading D6--12-1480 D6 2-148 D6-12 12-1481 481 Use: D2 - D4 - D5 D - D6 K n u r l i n g h o l de r D 6 Knurling holder D 6 -1 2 -M 2 9 3 - 1 For knurling width 4.00 x ø 15.00 Knurling holder D 6 -1 2 -M 2 9 3 - 2 For knurling width 5.00 x ø 15.00 Use: D6 - D6SR Knurling K urling holde er D2 Knurling holder der D2--X--M196-1 D2 For knurling width 4.00 x ø 12.00 Knurling holder D 2 -X -M 1 9 6 - 2 For knurling width 4.00 x ø 15.00 Use: D2 - D4 - D5 - D6 www.spc-tooling.ch info@spc-tooling .ch 12
Le a d-s c r e w a n d di e h o l de r M e tr ic Ex. thread M3 x0.50 D D 6 -1 4 - M D6-14-M0.5D Inch Ex. thread 2-64 UNF D 6 - 1 4 -Z D6-14-Z64D Die holder D 6 - 1 4 - 1 6 6 2 -1 Die holder D6--14-166 D6 14-1662-2 2-2 Use: D6SR Ca m r e tu r n D6 0 . 8 / 1 m m D 6 -1 4 - 1 5 2 5 1 /1mm D6-14-1526 1 . 5 / 1 m m D 6 -1 4 - 1 5 2 7 - 1 2 /1mm D6-14-1527-2 3 /1mm D6-14-1527-3 4 /1mm D6-14-152 D64-1 27-4 Use: D6 - D6S D6SR SR www.spc-tooling.ch info@spc-tooling .ch 13
CATALOG TOOLING SPC Tooling Sàrl Route de Boudry 22A Box 68 CH-2016 Cortaillod Tel. 41 32 841 44 00 www.spc-tooling.ch info@spc-tooling.ch . In case of order, and to avoid any manufacturing errors, please specify: Article number Feed rollers: In bronze (threaded)
ariyoshi taylor kaleo o nal spc 15y 20130401 armendariz carlos diego spc 25n 20130401 armstrong arlee isaiah spc 19d 20130401 armstrong timothy william spc 15u 20130401 arrington klinton shane spc 68w 20130401 arroyo christopher david spc 35g 20130401 artis julissa vivian spc 92w 20130401 .
Mar 01, 2021 · bolin david alexander spc 11b 20210301 bond patrick james spc 11b 20210301 bonilla yazmin ivelis spc 68w 20210301 bonin logan joseph spc 25q 20210301 bonneville lawrence joseph spc 88m 20210301 . cline braden shane spc 35n 20210301 clisch michae
where statistical process control, SPC, comes in. SPC uses statistics to detect variations in the process so they can be controlled. This book offers a detailed look at SPC, from how and why it began to how it works. It also offers ways to start up an SPC program, and describes how
C.E. Tooling, started out in 1966 in Chicago as a tool & die shop. In the late 70's we directed our energies exclusively to the manufacturing of tooling for turret and duplicator presses. In 2004, C.E. Tooling moved into a brand new 22,000 sq. foot facility, designed specifically for the manufacturing and servicing of fabricator tooling and .
damaging punch. Ask for brochure for your tooling style. C.E. Tooling, started out in 1966 in Chicago as a tool & die shop. In the late 70's we directed our energies exclusively to the manufacturing of tooling for turret, and duplicator presses. Presently, C.E. is the third largest independent turret press tooling supplier in the U.S., and has
tooling for your applications. LVD offers a range of tooling options using standard or taller punches with various radii and different V-dies with open widths from 0.23" (6 mm) to 1.96" (50 mm). Tooling rotation LVD helps protect your tooling investment by continually rotating tooling to allow for even wear. After use, the tool changer
6 Procuring section is the area within SPC initiating the procurement activity. It could be a division, section, team or programme. Authorised delegate is a person authorised by SPC’s Instrument of Delegations or Instrument of Authorisation or any SPC policy to make a decision or to undertake an activity. In any conflict between this pol
banking industry, ignite innovation and enhance the public’s experience with the financial services industry. 4 The future of banking is open. Open Banking regulation has evolved from the original intent The UK started introducing an Open Banking Standard in 2016 to make the banking sector work harder for the benefit of consumers. The implementation of the standard was guided by .
