HITACHI P1 Variable Frequency Drive User Guide - Manuals
Manuals — User Manuals Simplified. HITACHI P1 Variable Frequency Drive User Guide Home » Hitachi » HITACHI P1 Variable Frequency Drive User Guide Contents [ hide 1 HITACHI P1 Variable Frequency Drive 2 Quick Start Essential Parameters 3 KEYPAD FUNCTIONS 4 To Set the Motor Data 5 To Set the Speed Reference 6 To Set the Run Command Source 7 To Set the Speed in Hz Using the Keypad Parameters 8 To Set the Acceleration and Deceleration Times 9 To Set the Stop Mode 10 Documents / Resources 11 Related Posts HITACHI P1 Variable Frequency Drive
Quick Start Essential Parameters AA101 – Frequency (Speed) Source (default 01 Analog Input 1) AA111 – Run Command Source (default 0 Terminal FW/RV) [2 wire control] AA115 – Stop Mode Selection (default 00) Hb102 – Motor Capacity in killowatts (default NA) Hb103 – Motor Poles (default 4 poles) Hb104 – Base Frequency (default 60Hz) Hb105 – Maximum Frequency (default 60Hz) Hb106 – Motor Voltage Hb108 – Motor Current in Amps FA-01 – Keypad Speed Setting (default 00.00) FA-10 – Acceleration Time (default 30 seconds) FA-12 – Deceleration Time (default 30 seconds)
To Enter Programming Mode and Use the P1 Keypad for Programming KEYPAD FUNCTIONS The top buttons numbered 1 and 2 are soft keys as they change functions with different programming screens. A The direction pad is used to navigate through parameters B The center of the direction pad is the Enter key (ο) C Run is the Green bottom left key D Stop is the Red bottom right key Now you are ready to program your P1 drive. To Set the Motor Data The parameters are grouped together intuitively for simple programming. 1. Press the 1 (Menu) soft key to enter Programming Mode
2. Press enter to select Scroll Mode 3. Press down until H: Motor Control is reached 4. Press the enter key 5. Press the 2 (Next Gr.) soft key until Hb parameters are reached. If you go too far, keep pressing the 2 key and the parameter list will swing back around to the HA group 6. Enter the motor data in the parameters listed below. Hb102– Motor Capacity (kw) Hb103 – Motor Poles Hb104 – Base Frequency (Hz Hb105 -Max Frequency (Hz) Hb106 – Motor Voltage (VAC) Hb108 – Motor Current (Amps) 7. Press 2 (Save) soft key to save the data for each parameter. BE SURE TO PRESS 2 (SAVE) SOFT KEY TO SAVE THE DATA TO EEPROM To Set the Speed Reference 1. Press the 1 (Menu) soft key to enter Programming Mode 2. Press enter to select Scroll Mode 3. Press down until A: Standard Functions is reached 4. Press the enter key 5. Press enter to select parameter AA101
6. Select the speed reference from the options below 1 – Analog Input 1 (Ai1) 2 – Analog Input 2 (Ai2) 3 – Analog Input 3 (Ai3) 4 – Analog Input 4 (Ai4) 5 – Analog Input 5 (Ai5) 6 – Analog Input 5 (Ai6) 7 – Keypad (parameter FA-01) 8 – RS485 (Modbus communication) 9 – Option 1 10 – Option 2 11– Option 3 12– Pulse Train (In) 13– Pulse Train (Opt) 14– EzSq (Easy Sequence Programming) 15– PID 16 – VR (Potentiometer on Keypad) 7. Press 2 (Save) soft key to save the data BE SURE TO PRESS 2 (SAVE) SOFT KEY TO SAVE THE DATA TO EEPROM To Set the Run Command Source 1. Press the 1 (Menu) soft key to enter Programming Mode 2. Press enter to select Scroll Mode 3. Press down until A: Standard Functions is reached 4. Press the enter key 5. Press down key until AA111 is reached
6. Press enter to select parameter AA111 7. Now you can select the Run Command Source from the options below 0– Terminal (FW)/ (RV) 1– 3 Wire 2– Runkey (Keypad) 3– RS485 4– Option-1 5– Option-2 6– Option-3 8. Press 2 (Save) soft key to save the data BE SURE TO PRESS 2 (SAVE) SOFT KEY TO SAVE THE DATA TO EEPROM To Set the Speed in Hz Using the Keypad Parameters 1. Press the 1 (Menu) soft key to enter Programming Mode 2. Press enter to select Scroll Mode 3. Press down until F: Ref-Mon./Setting is reached 4. Press the enter key 5. Press enter to select parameter FA-01 6. Now you can select the Running speed using the Direction keys on the direction keypad 7. Press 2 (Save) soft key to save the data This parameter can be changed while the motor is running or stopped BE SURE TO PRESS 2 (SAVE) SOFT KEY TO SAVE THE DATA TO EEPROM
To Set the Acceleration and Deceleration Times 1. Press the 1 (Menu) soft key to enter Programming Mode 2. Press enter to select Scroll Mode 3. Press down until F: Ref-Mon./Setting is reached 4. Press the enter key 5. Press the down key until FA-10 (Acceleration) or FA-12 (Deceleration) is reached 6. Press enter to select parameter FA-10 for Acceleration or FA-12 for Deceleration 7. Now you can adjust the Accel/Decel time using the Direction keys on the direction keypad 8. Press 2 (Save) soft key to save the data BE SURE TO PRESS 2 (SAVE) SOFT KEY TO SAVE THE DATA TO EEPROM To Set the Stop Mode 1. Press the 1 (Menu) soft key to enter Programming Mode 2. Press enter to select Scroll Mode
3. Press down until A: Standard Functions is reached 4. Press the enter key 5. Press the down key until AA115 is reached 6. Press enter to select parameter AA115 7. Now you can select the Stop Mode from the options below 0- Decel. To STOP 1- Free run STOP 8. Press 2 (Save) soft key to save the data BE SURE TO PRESS 2 (SAVE) SOFT KEY TO SAVE THE DATA TO EEPROM TECH SUPPORT 980-500-7141 WEBSITE https://www.hitachi-iesa.com/ac-drives-inverters EMAIL Inverter.Info@hitachi-iesa.com Documents / Resources HITACHI P1 Variable Frequency Drive [pdf] User Guide P1, Variable Frequency Drive, P1 Variable Frequency Drive Manuals , home privacy
HITACHI P1 Variable Frequency Drive Quick Start Essential Parameters AA101 - Frequency (Speed) Source (default 01 Analog Input 1) AA111 - Run Command Source (default 0 Terminal FW/RV) [2 wire control] AA115 - Stop Mode Selection (default 00) Hb102 - Motor Capacity in killowatts (default NA) Hb103 - Motor Poles (default 4 poles) Hb104
82 hitachi zx200-3, zx225usrlc-3 1033091 sprocket sp-zx200-3 83 hitachi zx240-3 1032489 sprocket 84 hitachi ex300-1/2, ex270-1/2 1010467 sprocket 80 sp-ex300-1 85 hitachi ex300-3,ex270-5 1017928 sprocket 80 sp-ex300-3 86 hitachi ex300-5, ex330-5, zx270, zx330, zx350, zx370 1022168 sprocket 85 sp-ex300-5 87 hitachi
HITACHI MELBOURNE HITACHI MELBOURNE 50,000.00 GST 55,000.00 55,000.00 GST 60,500.00 Hitachi ZX48U-5 Excavator VIC, NSW, TAS, SA, ACT Jan 2019 Hitachi ZX48U-5 Excavator ID: D00030942 ROPS CAB, HBP, NEW HYD QH, 300MM, 45
Hitachi TagmaStore Network Storage Controller" omitted from document titles. For example, Hitachi TagmaStore Universal Storage Platform and Hitachi TagmaStore Network Storage Controller Storage Navigator User’s Guide is shortened to Storage Navigator User’s Guide. This user's
Status Report - BWRX-300 (GE Hitachi and Hitachi GE Nuclear Energy) USA DATE (2019/9/30) The BWR-300 is the 10th generation Boiling Water Reactor (BWR) crated by GE Hitachi Nuclear Energy (GEH). It is a SMR evolution of the ESBWR which is licensed by the US NRC and utilizes many of the components for the operational
Hitachi's SJ300 Series Variable Frequency Drive Delivers Full Feature Performance Across A Wider Range of Demanding Applications Requiring High Starting Torque and Functional Versatility. Adaptive/Basic auto-tuning Auto-tuning to perform sensorless vector control can now be easily done both on-line and off-line.
series storage. In contrast, the new Hitachi VSP N series is a completely integrated NAS storage offering that supports unstructured and file-block storage access in a single system package. This paper will review the new Hitachi VSP N series storage and current HNAS platform functionality and capabilities. Hitachi VSP N series storage
Developed exclusively for the ZX890-6 and EX1200-6 to EX3600-6 models, Hitachi Genuine GET are manufactured and tested to the same high standard as all Hitachi construction equipment. The teeth and adapters improve the penetration and overall digging power of Hitachi machines. They are easy to install and remove, safe and robust, and
Jane Phillips Janice Harris John Padginton Michelle Gale Nicolle Marsh Sue Russell Wendy Cupitt Ben Lapworth Ring 10 – . Scrim - Anne Sutherland Amanda Hubbard Claire Hayes Debbie Reynolds Debbie Styles Diana Woodhouse Diane Bradley Francis Bugler Graham Avery Karen James Sue Norman Ring 8 – Jenny Slade VYNE VYNE Ring 10 – Sue Luther Little Meadows LITTLE MEADOWS Ring 12 – Sara Tuck .
