STEEL TRACK FESTOON SYSTEM KITS - Hubbellcdn
FESTOONS Workplace Solutions STEEL TRACK FESTOON SYSTEM KITS Install a high speed, smooth operating festoon system on an overhead crane or similar application. Kits include all required parts track, trolleys, and mounting clamps. Refer to model charts on following pages for system lengths and cables available. TRACK BRACKET –THREE PIECES Supports track to cross arms. BEAM CLAMPS Fasten cross arms to I-beam. Includes track nuts. (Optional.) CROSS ARMS Supports festoon track every 6’. (Optional.) TOW TROLLEY Last trolley on moving end of system. (Included.) END STOP CROSS ARM TRACK SPLICE Ends of both track sections must be visible through “peep” hole to assure secure splice. INTERMEDIATE TROLLEYS JUNCTION BOX TROLLEY Has twin trolleys. Used with push button control station at moving end of festoon system. (Not included. See page 20.) FIXED CABLE CLAMP Secures cable and acts as stop on “non-moving “ end. JUNCTION BOX (Not included. See page 23.) PENDANT CABLE (Not included. See page 24.) PENDANT PUSH BUTTON CONTROL STATION (not included) 17 G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w. h u b b e l l . c o m / g l e a s o n r e e l / e n
FESTOONS Workplace Solutions C-Rail C-RailFestoon Festoon Kits Kits RAIL MOUNTED FOR SPEED AND LONG LIFE SELECTING STEP 1 -SELECTING Choose a kit number below considering the Choose a kit number considering the active travel activeSTEP travel1 distance you require (AT)below and allowable distance you require (AT) and allowable loop depth (30, etc.). loop depth (30, etc.). STEP 2 To complete kit number, add loop depth (LD) (and cable O.D. STEP 3 Order optional components, including flat or round cable. STEP 2 - To complete code kit number, for Type add “CR” loop rounddepth kits). (LD) (and cable O.D. code for Type “CR” round kits). CABLE NOT INCLUDED STEP 3 - Order optional components, including flatCABLE or ORDER CABLE AND CONNECTORS ON PAGE 23 NOT INCLUDED round cable. ORDER CABLE OR HOSE ON PAGE 5 Series “CF” kits for FLAT CABLE 30 KIT NUMBER CF–02– CF–03– CF–04– CF–05– CF–06– CF–07– CF–08– CF–09– CF–10– CF–11– CF–12– CF–13– CF–14– CF–15– CF–16– CF–17– LOOP DEPTH IN INCHES AT SD SL* ft.–in. ft.–in. ft.–in. Active Cable ft.** 36 LOOP DEPTH IN INCHES ft.–in. ft.–in. ft.–in. ft.** ft.–in. ft.–in. ft.–in. LOOP DEPTH IN INCHES AT SD SL* Active Cable ft.** ft.–in. ft.–in. ft.–in. Active Cable ft.** 16 – 7 18 17 – 6 1–4 19 – 4 21 20 – 3 1–4 22 – 1 24 1 – 7 21 – 10 23 23 – 4 1–7 25 – 5 27 27 – 0 1–7 29 – 1 31 24 24 – 8 1 – 11 27 – 0 29 29 – 3 1 – 11 31 – 7 34 33 – 9 1 – 11 36 – 1 39 29 29 – 8 35 35 – 1 37 – 8 41 40 – 6 2–2 43 – 2 47 48 47 – 4 2–5 50 – 2 55 1 – 4 13 – 10 15 14 – 10 1 – 4 16 – 1 1–7 18 – 2 19 19 – 9 20 – 2 1 – 11 22 – 6 24 – 2 26 – 9 48 LOOP DEPTH IN INCHES AT SD SL* Active AT SD SL* Cable 12 – 1 2–2 42 2–2 32 – 3 2–2 28 – 3 2–5 31 – 1 34 34 – 7 2–5 37 – 5 41 40 – 11 2 – 5 43 – 10 32 – 3 2–8 35 – 5 38 39 – 6 2–8 42 – 8 46 46 – 9 2 – 8 49 – 11 54 54 – 1 2–8 57 – 3 62 36 – 3 3–0 39 – 8 43 44 – 6 3 – 0 47 – 11 52 52 – 8 3–0 56 – 1 61 60 – 10 3 – 0 64 – 3 70 40 – 4 3–3 44 – 0 48 49 – 5 3–3 53 – 1 58 58 – 6 3–3 62 – 2 68 67 – 7 3–3 71 – 3 78 44 – 4 3–6 48 – 4 53 54 – 4 3–6 58 – 4 64 64 – 4 3–6 68 – 4 75 74 – 4 3–6 78 – 4 86 48 – 5 3–9 52 – 7 57 59 – 4 3–9 63 – 6 69 70 – 2 3–9 74 – 5 81 52 – 5 4 – 1 56 – 11 62 64 – 3 4–1 68 – 9 75 56 – 6 4–4 61 – 3 67 69 – 2 4–4 74 – 0 81 60 – 6 4–7 65 – 6 72 74 – 2 4–7 79 – 2 87 64 – 6 4 – 10 69 – 10 76 68 – 7 5–2 74 – 2 81 72 – 7 5–5 78 – 6 86 Add LOOP DEPTH (LD) Flat kit number example: CF - 04 - 30 Need more? Longer travel or larger cables? Systems designed for pendant controls or workstations? Additional systems are available. Consult your local distributor for details. *System Length (SL) Storage Distance (SD) Active Travel (AT) 4”–6" for End Stop, End Caps, Etc. System Length shown above is achieved using indicated loop depth and active cable length. System length may be increased by lengthening Active Cable and (1) decreasing loop depth or (2) increasing number of trolleys. C-rail track included in kit is in 6' lengths only and must be field cut to desired System Length. **Lengths listed are for ACTIVE cable only. If you need hookup cable at fixed end (FC) or moving end (MC) you MUST ADD it when ordering or cutting cable. System Length SL Storage Distance SD 6 Active Travel AT 3 4 2 C L Fixed Cable C L Moving Cable MC 5 6 7 8 Loop Depth C L LD FC 2 1 Standard Kit Components 1 2 3 4 C-Rail Track End Clamp (End Clip) Intermediate Trolleys Tow Trolley 5 6 7 8 Cable (Optional) End Cap Coupler/Hanger End Stop G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w. h u b b e l l . c o m / g l e a s o n r e e l / e n 18
FESTOONS Workplace Solutions Features & Specifications Kits are boxed for parcel delivery shipment and are Trolley Body, Saddles & Clips Wheels zinc-plated steel, smooth ball bearingdip finish complete with Zinc–plated steel withrunning yellow dichromate Smooth–running ball bearing C-Rail Track, all Axles Wheels zinc-plated steel Axles Zinc–plated steel components and C-Rail Track roll-formed galvanized steel C–Rail Track Roll–formed galvanized steel hardware. Kits are boxed for Hardware steel steel Hardware zinc-plated Zinc–plated parcelIncludes: deliveryC-Rail, Up to 72 feet (21.6M)* Active Active TravelTravel up to 72 ft (21.6m)* Coupler Hangers, shipment and are Trolley loads Up to 45 lbs/trolley (20.25kg)** Trolleys, Tow Trolley, TrolleySpeed Loads up to 45 complete with Uplbs/trolley to 250 fpm(20.25kg)** (75M/m) End Stop, End Clamp C–Rail Track, all Speed *Additional kitsup to 250 fpm (75mpm) available for longer travel. and End Caps. Consult your distributor for details. components, and *Additional kits are for available foronly. longer travel. Consult factory for details. **Designed cable loads Cable NOT included. hardware. &&Specifications Trolley Features Body, Saddles Clips **Designed for cable loads only. Series “CR” kits for ROUND CABLE 30 KIT NUMBER CR–02– –2 CR–03– –2 CR–04– –2 CR–05– –2 CR–06– –2 CR–07– –2 CR–08– –2 CR–09– –2 CR–10– –2 CR–11– –2 CR–12– –2 CR–13– –2 CR–14– –2 CR–15– –2 CR–16– –2 CR–17– –2 CR–18– –2 CR–19– –2 LOOP DEPTH IN INCHES AT SD SL* ft.–in. ft.–in. ft.–in. Active Cable ft.** 36 LOOP DEPTH IN INCHES 42 AT SD SL* Active AT SD SL* Cable ft.–in. ft.–in. ft.–in. 48 LOOP DEPTH IN INCHES ft.** ft.–in. ft.–in. ft.–in. LOOP DEPTH IN INCHES AT SD SL* Active Cable ft.** ft.–in. ft.–in. ft.–in. Active Cable ft.** 10 – 10 1 – 4 12 – 8 17 13 – 6 1–4 15 – 3 20 16 – 1 1 – 4 17 – 10 23 18 – 8 1–4 20 – 6 26 14 – 6 16 – 7 22 18 – 0 1–7 20 – 0 26 21 – 5 1–7 23 – 6 30 24 – 11 1 – 7 27 – 0 34 18 – 2 1 – 11 20 – 6 27 22 – 6 1 – 11 24 – 10 32 26 – 10 1 – 11 29 – 2 37 31 – 2 1 – 11 33 – 6 42 21 – 9 2–2 24 – 4 33 27 – 0 2–2 29 – 7 39 32 – 2 2–2 34 – 9 45 37 – 5 2–2 40 – 0 51 25 – 5 2–5 28 – 3 38 31 – 6 2–5 34 – 4 45 37 – 7 2–5 40 – 5 52 43 – 8 2–5 46 – 6 59 29 – 0 2–8 32 – 2 43 36 – 0 2–8 39 – 1 51 42 – 11 2 – 8 46 – 1 59 49 – 10 2 – 8 53 – 0 67 32 – 8 3–0 36 – 1 49 40 – 6 3 – 0 43 – 11 58 48 – 3 3–0 51 – 8 67 56 – 1 3–0 59 – 6 76 36 – 4 3–3 40 – 0 54 45 – 0 3–3 48 – 8 64 53 – 8 3–3 57 – 4 74 62 – 4 3–3 66 – 0 84 39 – 11 3 – 6 43 – 11 59 49 – 6 3–6 53 – 5 70 59 – 0 3–6 63 – 0 81 68 – 7 3–6 72 – 7 92 43 – 7 3 – 9 47 – 10 65 54 – 0 3–9 58 – 2 77 64 – 5 3–9 68 – 8 89 74 – 10 3 – 9 79 – 1 101 47 – 2 1–7 4–1 51 – 8 70 58 – 6 4–1 63 – 0 83 69 – 9 4–1 74 – 3 96 50 – 10 4 – 4 55 – 7 75 63 – 0 4–4 67 – 9 89 75 – 2 4 – 4 79 – 11 103 54 – 6 4–7 69 – 6 81 67 – 6 72 – 6 96 58 – 1 4 – 10 63 – 5 4–7 86 72 – 0 4 – 10 77 – 4 102 61 – 9 5–2 67 – 4 91 65 – 4 5–5 71 – 3 97 69 – 0 5–8 75 – 1 102 72 – 8 5 – 11 79 – 0 108 Need more? Longer travel or larger cables? Systems designed for pendant controls or workstations? Additional systems are available. Consult your local distributor for details. Standard Series CR Kits have saddle for O.D. range 0.60" – 0.94" (typical 3/8" I.D. hose). If optional saddle with O.D. range of 0.31" – 0.59" is desired, substitute “1” for “2” as last digit of model number. Example: CR–2–30–1 Add LOOP DEPTH (LD) Round kit number example: CR - 04 - 30 - 2 *System Length (SL) Storage Distance (SD) Active Travel (AT) 4”–6" for End Stop, End Caps, Etc. See note previous page. C-rail track included in kit is in 6' lengths only and must be field cut to desired System Length. **Lengths listed are for ACTIVE cable only. If you need hookup cable at fixed end (FC) or moving end (MC) you MUST ADD it when ordering or cutting cable. System Length SL Storage Distance SD 6 2 Fixed Cable Active Travel AT 3 4 C L C L Moving Cable MC Loop Depth 7 8 6 C L LD FC 5 19 1 FOR COMPONENT DIMENSIONS, SEE THE FOLLOWING PAGE. 3 G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w. h u b b e l l . c o m / g l e a s o n r e e l / e n
FESTOONS Workplace Solutions ADD TO C–RAIL FESTOON KITS SHOWN ON PRECEDING PAGES COMPONENTS - C-Rail Festoon Festoon Components For FLAT Cable 0.984 dia. (25) 1.0 (25) C Max. B A in. (mm) 2.00 (51) 3.12 (80) B in. (mm) 1.00 (25) 1.56 (40) C in. (mm) 1.50 (38) 0.94 (24) Wt. lbs. (Kg) 1.46 (.66) 1.63 (.73) Model No. C35-FC-32 C35-FC-52 C35-FC-53 A in. (mm) 2.00 (51) 2.00 (51) 3.12 (80) C in. (mm) 0.56 (14) 1.50 (38) 0.94 (24) D in. (mm) 3.12 (79) 5.00(127) 5.00(127) E in. (mm) 3.72(94) 4.76(121) 4.31(109) FLAT CABLE TOW TROLLEY Wt. lbs. (Kg) 0.84 (.38) 0.94 (.42) 1.11 (.50) Model A C D E Wt. No. in. (mm) in. (mm) in. (mm) in. (mm) lbs. (Kg) C35-FT-52 2.00 (51) 1.50 (38) 5.00(127) 8.18(208) 2.38(1.07) C35-FT-53 3.12 (80) 0.94 (24) 5.00(127) 8.18(208) 2.45(1.10) 0.984dia. (25) 0.984 dia. (25) 1.1 (17) 1.80 (46) 3.62 (92) 1.80 (46) 1.6 (40) 5.00 (127) 0.97 (25) 3.1 (79) 0.97 (25) 5.5 (140) A Dia. 3.25 (83) For ROUND Cable or Hose 0.9 (23) 2.1 (54) FLAT CABLE INTERMEDIATE TROLLEYS FLAT CABLE END CLAMP Model No. C35-FE-02 C35-FE-03 C Max. A Dia. 3.25 (83) A Dia. 3.25 (83) 1.75 (44) E E 2.1 (54) 2.1 (54) C 3.61 (92) 2.77 (70) 1.6 (40) 1.1 (27) D 0.97 (25) D 0.97 (25) 5.5 (140) 0.984dia. (25) B 2.59 (70) 1.75 (44) B B Dia. Range Dia. Range A in. (mm) 0.31–0.59 (8–15) 0.60–0.94 (15–24) 0.95–1.25 (24–32) ROUND CABLE/HOSE INTERMEDIATE TROLLEY B C Wt. in. (mm) in. (mm) lbs. (Kg) 1.10 (28) 2.75 (70) 1.41 (.63) 1.25 (32) 3.86 (98) 1.53 (.69) 1.47 (37) 5.59(142) 1.85 (.83) Model No. C35RC-11 C35RC-12 C35RC-13 A in. (mm) 0.31–0.59 (8–15) 0.60–0.94 (15–24) 0.95–1.25 (24–32) 1.10 (28) 2.75 (70) 1.41 (.63) 1.25 (32) 3.86 (98) 1.53 (.69) 1.47 (37) 5.59(142) 1.85 (.83) Accessories for Flat and Round Kits C-RAIL 1.2 (30) TRACK–GALVANIZED Model 0.08 Thk. (2) 0.5 0.08 Thk. (12) (2) A 0.5 Wt. (12)lbs. (Kg) ft. (m) 6 (1.8) A Wt. 6.3 (2.84) ft. (m) 12 (3.6) lbs. (Kg)12.6 (5.67) 18.9 (8.51) 6 (1.8) 18 (5.4) 6.3 (2.84) 12 (3.6) 20.50 12.6 (5.67) 18 (5.4) (521) 18.9 (8.51) No. C-RAIL TRACK–GALVANIZED Model C35-TR-06 No. C35-TR-12 C35-TR-06C35-TR-18 C35-TR-12 C35-TR-18 5.00 (127) 2.25 (57) 2.25 (57) END STOP #WS30-ES END STOP Weight 0.3 lbs WS30-ES Wt. 0.3 lbs C35-UN-02 8.00 (3.6) OPTIONAL Components ELECTRICAL BOX Order End Clamp and Glands separately. 2.5 (64)ARM TOW 16.0 (406) Attaches to your machine and inserts into Trolley to1.6tow the system. 1.0 2.5 Tow (64) 0.75 (19) (40) 2.5 (64) 1.6 (40) (40) TOW ARM 1.6 (40) DESCRIPTION DESCRIPTION TOW ARM TOW ARM 4 20 (25) 16.0 (406) 0.2 (5) 1.6 2.5 (64) *shown-includes I-beam notch 1.0 Attaches to your machine (25) and inserts into Tow Trolley to tow the 0.2 system. (5) CATALOG MODEL NUMBER NUMBER CTA-01 (59) CTA-01 WGT lb. WGT (kg) lb. (kg) 1.3 (59) 1.3 4.0 (102) TRACK COUPLER .344 Dia. C35-CP-01 hole Weight 1.0 lbs 1.4 (36) 2.0 (51) 1.46 (37) 6.50 (165) 2.75 (70) 2.33(1.05) 6.70 (170) 3.86 (98) 2.45(1.10) 6.92 (176) 5.59(142) 2.77(1.25) .344 Dia. (2) holes (51) COUPLER/HANGER COUPLER/HANGER Model Wt. BRACKET No. lbs. (Kg) C35-CP-02 C35-CP-02 1.25 (.56) Wt. 1.25 lbs TRACK HANGER Model No. C35-HB-03 2.93 Wt. (73) lbs. (Kg) 0.55 (.25) 1.6 (41) 1.4 (36) 1.68 (43) 1.6 (41) 2.93 (73) 1.50 (38) MOUNT TRACK HANGER Model No. C35-HB-02 3.0 (76) 2.23 (57) B C Wt. in. (mm) in. (mm) lbs. (Kg) 1.46 4.0 (37) (102)VERTICAL 1.4 (36) No. Wt. lbs. (Kg) C35-UO-01 4.00 (1.8) lbs. (Kg) Order electrical box and end clamp separately. C35-UN-01 4.00 (1.8) ELECTRICAL BOX END CLAMP 2.23 (57) Model Wt. No. lbs. (Kg) 4.0 C35-CP-01 (102) 1.0 (.45) 1.46 (37) C35-CPN-01* 1.0 (.45) A in. (mm) 0.31–0.59 (8–15) 0.60–0.94 (15–24) 0.95–1.25 (24–32) 2.0 1.6 1.68 (41) (43) TRACK COUPLER Model No. 5.75 (146) END CLAMP 0.75 (19) 4.0 (102) Model No. C35RT-11 C35RT-12 C35RT-13 .344 Dia. (2) holes 2.0 (51) 1.6 (41) CONTROL UNIT 5.75 CONTROL UNIT ASSEMBLY TROLLEY ASSEMBLY (146) WITH 2 TROLLEYS Model Wt. 20.50 (521) 5.00 (127) 1.4 (36) 1.3 (32) 1.3 1.2 (32)(30) Length A C ROUND CABLE/HOSE TOW TROLLEY B C Wt. in. (mm) in. (mm) lbs. (Kg) ACCESSORIES Accessories for Flat and Round Kits Length A Dia. Range A ROUND CABLE/HOSE END CLAMP Model No. C35RE-11 C35RE-12 C35RE-13 C A C A 1.2 VERTICAL 1.6 (34) (41) MOUNT HANGER C35-HB-02 Wt. 1.25 lbs Flat and Round Kits FLAT -TO-ROUND CABLE and safely from flat CONNECTOR SET Go quickly CABLE FLAT-TO-ROUND to round cable. Consists of one each SET male and female plugs CONNECTOR Wt. lbs. (Kg) 0.40 (.18) HORIZONTAL MOUNT TRACK HANGER1.4 Model No. C35-HB-01 (36) Wt. lbs. (Kg) 0.40 (.18) .344 Dia. (2) holes 2.0 (51) 2.0 (51) 1.4 (36) TRACK HANGER C35-HB-03 Wt. .55 lbs 1.6 (41) HORIZONTAL MOUNT HANGER C35-HB-01 MULTIPLE CABLE CONNECTOR 1.25 lbs provides a Aluminum cast Wt. connector weathertight connection between multipleBEAM CLAMP cables (flat and/or round) and junction box. C35-BCA Order un-cut (blank) model and machine Wt. 0.34 .lbs 1.5 (38) 7.2 (183) fiber-board designed Go to accept quickly flat and or safely from flat to round cable. stiffener and round cableConsists and lockoftogether one each male and female 2.25 plugs rubber insert 2.9 securely. Plugs are 3-pole, 4- flat or round cable and (73) (57)lock designed to accept wire plus together ground securely. and will Plugs are 3-pole, 4-wire plus to suit, OR 6.6 accommodate round cable ground and will accommodate (167) round cable sizes order a pre-cut sizes #14 #14 AWGAWG through #10#10 AWG; flat cable up to 1.00" connector by through wide. " Ratings: 20 amp, 480 volt, 3 providing cutAWG; flat cable up to 1.00 20 NEMA configuration #L16-20. ting pattern. MODEL wide. Ratings: phase. 2.3 1.5 DESCRIPTION MODEL Plugs are double-insulated (38) plastic amp, 480 volt, 3 NUMBER (59) DESCRIPTION NUMBER and resist impact, corrosion and most phase. NEMA configMODEL Set of 2 Locking Plugs LC-01 chemicals. DESCRIPTION Set of 2 Locking Plugs uration LC-01 #L16-20. NUMBER *Please proPlugs are double-insulated vide cutting plastic and resist impact, corroBlank Connector MCC-1U pattern for sion and most chemicals. Pre-cut Connector MCC-1C #MCC-1C. G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w. h u b b e l l . c o m / g l e a s o n r e e l / e n
FESTOON ACCESSORIES Workplace Solutions Kellems Deluxe Cord Grips for Strain Relief Aluminum Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables Grip Diameter Range In. (cm) Threat Size NPT In. Form Size 3/8" F1 CGD-1001 CGD-1002 CGD-1003 Model No. 0.250–0.312 0.312–0.375 0.375–0.437 (.63–.79) (.79–.95) (.95–1.11) 0.187–0.250 0.250–0.375 0.375–0.500 0.500–0.625 (.47–.63) (.63–.95) (.95–1.27) (1.27–1.59) 1/2" F2 CGD-1004 CGD-1006 CGD-1008 CGD-1010 0.625–0.750 0.750–0.875 (1.59–1.90) (1.90–2.22) 1/2" F3 CGD-11247 CGD-11248 0.187–0.250 0.250–0.375 0.375–0.500 0.500–0.625 (.47–.63) (.63–.95) (.95–1.27) (1.27–1.59) 3/4" F2 CGD-1011 CGD-1013 CGD-1015 CGD-1017 0.625–0.750 0.750–0.875 (1.59–1.90) (1.90–2.22) 3/4" F3 CGD-1018 CGD-11249 0.375–0.500 0.500–0.625 0.625–0.750 0.750–0.875 0.875–1.000 1.000–1.125 (.95–1.27) (1.27–1.59) (1.59–1.90) (1.90–2.22) (2.22–2.54) (2.54–2.86) 1" F4 CGD-11195 CGD-1019 CGD-1021 CGD-1023 CGD-1025 CGD-11250 1.125–1.250 1.250–1.375 (2.86–3.17) (3.17–3.49) 1" F5 CGD-11028 CGD-11029 0.750–0.875 0.875–1.000 1.000–1.125 1.125–1.250 1.250–1.375 (1.90–2.22) (2.22–2.54) (2.54–2.86) (2.86–3.17) (3.17–3.49) F5 CGD-11251 CGD-1026 CGD-1027 CGD-1028 CGD-11178 0.750–0.875 0.875–1.000 1.000–1.125 1.125–1.250 1.250–1.375 (1.90–2.22) (2.22–2.54) (2.54–2.86) (2.86–3.17) (3.17–3.49) F5 CGD-11252 CGD-1029 CGD-1030 CGD-1031 CGD-1032 1.312–1.437 1.437–1.562 1.562–1.687 1.687–1.812 1.750–1.875 (3.33–3.65) (3.65–3.97) (3.97–4.28) (4.28–4.60) (4.44–4.76) F6 CGD-11253 CGD-11254 CGD-11255 CGD-11256 CGD-11257 Note: 1 1/4" 1 1/2" 1 1/2" Kellems Deluxe Cord Grips are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class III Div. 1 & 2 of the National Electric Code Sections 501.10(b)(2), 502.10(a)(2), 502.10(b)(2), 503.10(a)(2) and 503.10(b). *Cable jacket may have to be stripped to pass through connector body. 21 G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w. h u b b e l l . c o m / g l e a s o n r e e l / e n
FESTOON ACCESSORIES Workplace Solutions Kellems Support Grips Permanent support when cable end is available for grip installation Service Drop-Light Duty, Single Eye, Closed Mesh Cable Diameter Range Range–Inches (mm) Approx. Breaking Strength Lbs. (N) E In. (cm) M In. (mm) Model No. 0.23–0.31 (6–8) 0.29–0.37 (7–9) 0.35–0.44 (9–11) 0.41–0.50 (10–13) 0.46–0.56 (12–14) 0.52–0.62 (13–16) 0.58–0.68 (15–17) 0.64–0.75 (16–19) 0.70–0.81 (18–21) 0.75–0.87 19–22) 0.81–0.94 (21–24) 0.87–1.00 (22–25) 0.94–1.06 (24–27) 1.00–1.18 (25–30) 1.06–1.25 (27–32) 290 (1,290) 290 (1,290) 500 (2,224) 500 (2,224) 660 (2,936) 790 (3,514) 790 (3,514) 790 (3,514) 790 (3,514) 1,020 (4,537) 1,020 (4,537) 1,020 (4,537) 1,020 (4,537) 1,020 (4,537) 1,020 (4,537) 3 (76) 4 (102) 4 (102) 5 (127) 6 (152) 7 (178) 7 (178) 7 (178) 7 (178) 8 (203) 8 (203) 8 (203) 9 (229) 9 (229) 9 (229) 3.75 (95) 4.25 (108) 4.75 (121) 5.00 (127) 5.25 (133) 6.25 (159) 6.50 (165) 6.75 (171) 7.25 (184) 8.00 (203) 8.25 (210) 8.75 (222) 9.00 (229) 9.50 (241) 9.50 (241) CG-16001 CG-16002 CG-16003 CG-16004 CG-16005 CG-16006 CG-16007 CG-16008 CG-16009 CG-16010 CG-16011 CG-16012 CG-16013 CG-16014 CG-16015 Service Drop-Heavy Duty, Single Eye, Closed Mesh Cable Diameter Range Range–Inches (mm) Approx. Breaking Strength Lbs. (N) E In. (cm) M In. (mm) Model No. 0.23–0.31 (6–8) 0.29–0.37 (7–9) 0.35–0.44 (9–11) 0.41–0.50 (10–13) 0.46–0.56 (12–14) 0.52–0.62 (13–16) 0.58–0.68 (15–17) 0.64–0.75 (16–19) 0.70–0.81 (18–21) 0.75–0.87 19–22) 0.81–0.94 (21–24) 0.87–1.00 (22–25) 0.94–1.06 (24–27) 1.00–1.18 (25–30) 1.06–1.25 (27–32) 500 (2,224) 500 (2,224) 870 (3,870) 870 (3,870) 1,050 (4,670) 1,050 (4,670) 1,050 (4,670) 1,390 (6,183) 1,390 (6,183) 1,390 (6,183) 1,390 (6,183) 1,790 (7,962) 1,790 (7,962) 1,790 (7,962) 1,790 (7,962) 5 (127) 5 (127) 6 (152) 6 (152) 6 (152) 7 (178) 7 (178) 7 (178) 8 (203) 8 (203) 8 (203) 8 (203) 9 (229) 9 (229) 9 (229) 4.50 (114) 5.50 (140) 6.50 (165) 7.50 (191) 8.00 (203) 8.50 (216) 9.50 (241) 9.50 (241) 10.50 (267) 10.50 (267) 10.50 (267) 11.50 (292) 12.50 (318) 13.50 (343) 14.50 (368) CG-17001 CG-17002 CG-17003 CG-17004 CG-17005 CG-17006 CG-17007 CG-17008 CG-17009 CG-17010 CG-17011 CG-17012 CG-17013 CG-17014 CG-17015 Support-Standard Duty, Single Eye, Closed Mesh Cable Diameter Range Range–Inches (mm) 0.50–0.62 0.63–0.74 0.75–0.99 1.00–1.24 1.25–1.49 1.50–1.74 1.75–1.99 (13–16) (16–19) (19–25) (25–32) (32–38) (38–44) (44–51) Approx. Breaking Strength Lbs. (N) E In. (cm) M In. (mm) 530 (2,357) 790 (3,514) 1,020 (4,537) 1,610 (7,161) 1,610 (7,161) 1,610 (7,161) 2,150 (9,563) 7 (178) 8 (203) 8 (203) 9 (229) 10 (254) 12 (305) 14 (356) 10 10 13 14 15 17 19 (254) (254) (330) (356) (381) (432) (483) Model No. CG-01013 CG-01014 CG-01015 CG-01017 CG-01018 CG-01019 CG-01020 Support-Heavy Duty, Single Eye, Closed Mesh Cable Diameter Range Range–Inches (mm) 0.75–0.99 1.00–1.24 1.25–1.49 1.50–1.99 (19–25) (25–32) (32–38) (38–51) Approx. Breaking Strength Lbs. (N) 2,820 4,280 4,280 4,280 (12,543) (19,037) (19,037) (19,037) E In. (cm) M In. (mm) Model No. 10 10 10 10 25 (635) 28 (711) 30 (762) 34 (864) CG-06010 CG-06011 CG-06012 CG-06013 (254) (254) (254) (254) Support-Standard Duty, Offset Eye, Closed Mesh Cable Diameter Range Range–Inches (mm) 0.50–0.62 0.63–0.74 0.75–0.99 1.00–1.24 1.25–1.49 1.50–1.74 1.75–1.99 22 (13–16) (16–19) (19–25) (25–32) (32–38) (38–44) (44–51) Approx. Breaking Strength Lbs. (N) 500 (2,224) 750 (3,336) 950 (4,226) 1,500 (6,672) 1,500 (6,672) 1,500 (6,672) 2,000 (8,896) E In. (cm) M In. (mm) 4 4 4 5 5 5 6 10 10 13 14 15 17 19 (102) (102) (102) (127) (127) (127) (152) (254) (254) (330) (356) (381) (432) (483) Model No. CG-01037 CG-01038 CG-01039 CG-01041 CG-01042 CG-01043 CG-01044 G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w . h u b b e l l . c o m / g l e a s o7n r e e l / e n
FESTOON ACCESSORIES Workplace Solutions NEMA 12 12 Electrical Boxes NEMA Electrical Boxes Continuous protection fromdust, dirt,oildust, oil and water. Continuoushinge. Hinge. Provides Provide protection from dirt, and water. Construction Construction Heavy Heavy14 14gauge gaugesteel steel. Continuously Continuouslywelded weldedseams seams. Closed-cell Closed-cellneoprene neoprenegasket gasket. External Externalmounting mountingfeet feet. Panel Panelincluded Included. Weldnutsprovided providedfor formounting Weldnuts panel mounting panel. Externalscrew screwclamps clampsare arequick External and easy to operate quick and easy to operate. Groundingkit kitprovided provided. Grounding Furnishedwithout withoutknockouts knockouts. Furnished Finish Finish ANSI-61gray gray polyester polyester powder powder inside ANSI-61 and out over phosphatised surfaces. inside and over white phosphatised Panels areout painted polyester surfaces. Panels are painted powder. white polyester powder. Listings Listings UL5050Listed, Listed,Types Types12 12&& 13 13 UL CSACertified, Certified,Types Types12 12&&13 13 CSA MeetsNEMA/EEMAC NEMA/EEMACType Type12 12 & Meets requirements &1313 requirements. JICEL EL- -11- -71 71 JIC Application: Designed for use as instrument housings, electrical control Application: Designed for use as instrument housings, electrical enclosures, terminal wiring boxes or electrical junction boxes. control enclosures, terminal wiring boxes or electrical junction boxes. Consult factory for other sizes and configurations. Consult factory for other sizes and configurations. Box Model No. Enclosure Size HxWxD Panel Size AxB Mounting CxE Overall LxM F G I J K N O P Q ENC-060604 6.00x6.00x4.00 (152x152x102) 8.00x8.00x4.00 (203x203x102) 10.00x8.00x4.00 (254x203x102) 10.00x10.00x6.00 (254x254x152) 12.00x12.00x6.00 (305x305x152) 14.00x12.00x6.00 (356x305x152) 16.00x10.00x6.00 (406x254x152) 4.88x4.88 (124x124) 6.88x6.88 (175x175) 8.88x6.88 (225x175) 8.88x8.88 (225x225) 10.88x10.88 (276x276) 12.88x10.88 (327x276) 14.88x8.88 (378x226) 6.75x4.00 (171x102) 8.75x6.00 (222x152) 10.75x6.00 (273x152) 10.75x8.00 (273x203) 12.75x10.00 (324x254) 14.75x10.00 (375x254) 16.75x8.00 (425x203) 7.50x7.00 (191x178) 9.50x9.00 (241x229) 11.50x9.00 (292x229) 11.50x11.00 (292x279) 13.50x13.00 (343x330) 15.50x13.00 (394x330) 17.50x11.00 (445x279) 3.53 (101) 3.53 (101) 3.53 (101) 5.53 (152) 5.53 (152) 5.53 (152) 5.53 (152) 6.31 (160) 8.31 (211) 8.31 (211) 10.31 (262) 12.31 (313) 12.31 (313) 10.31 (262) 5.00 (127) 7.00 (178) 7.00 (178) 9.00 (229) 11.00 (279) 11.00 (279) 9.00 (229) 0.56 (14) 0.56 (14) 0.56 (14) 0.56 (14) 0.56 (14) 0.56 (14) 0.56 (14) 2.38 (60) 1.00 (25) 1.00 (25) 1.00 (25) 1.00 (25) 1.00 (25) 1.00 (25) 2.78 (71) 2.78 (71) 2.78 (71) 4.78 (121) 4.78 (121) 4.78 (121) 4.78 (121) 3.53 (90) 3.53 (90) 3.53 (90) 5.53 (141) 5.53 (141) 5.53 (141) 5.53 (141) 0.63 (16) 0.63 (16) 0.63 (16) 0.63 (16) 0.63 (16) 0.63 (16) 0.63 (16) 6.31 (160) 8.31 (211) 10.31 (262) 10.31 (262) 12.31 (313) 14.31 (364) 16.31 (414) ENC-080804 ENC-100804 ENC-101006 ENC-121206 ENC-141206 ENC-161006 M Q 0.38 P NOTES: G 1. Panels (included) are 14 Ga. Steel. 2. Panel Screws are #10–32 Pan Hd. 3. Two Cover Clamps are used if H 8.00" or more. See below. 0.56 F O X D N 14 GA. X 0.44 L 0.75 0.31 PANEL (included) H 0.56 0.75 H H 0.50 E W 0.31 J B I A 1.25 1.25 0.38 C SECTION X–X K View showing clamp position when “H” is less than 8". K K View showing position of clamps when “H” is 8" or more. 8 23 G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w. h u b b e l l . c o m / g l e a s o n r e e l / e n
FESTOON ACCESSORIES Workplace Solutions BRASS MODELS for ROUND CABLE CABLE O.D. HOLE REQ’D RANGE in. (mm) in. CLEARANCE HOLE REQ’D in. (mm) 0.750 (19) 0.275 - 0.590 0.812 (21) CBF-21 0.16 - 0.45 0.55 - 1.18 1.469 (37) CBR-03 0.315 - 0.630 0.906 (23) CBF-22 0.16 - 0.45 0.94 - 1.57 1.875 (48) CBR-04 0.433 - 0.866 1.125 (29) CBF-23 0.20 - 0.47 1.14 - 1.77 2.140 (54) CBR-05 0.748 - 1.220 1.469 (37) CBF-24 0.20 - 0.47 1.34 - 1.97 2.375 (60) PLASTIC MODELS CABLE O.D. HOLE REQ’D RANGE in. (mm) in. PLASTIC MODELS CABLE THICK RANGE in. CABLE WIDTH RANGE in. CLEARANCE HOLE REQ’D in. (mm) CPR-11 0.231 - 0.394 0.750 (19) CPR-12 0.270 - 0.480 0.812 (21) CPF-31 0.16 - 0.45 0.59 - 1.06 1.469 (37) CPR-13 0.428 - 0.546 0.906 (23) CPF-32 0.16 - 0.45 0.94 - 1.34 1.875 (48) CPR-14 0.545 - 0.709 1.125 (29) CPF-33 0.20 - 0.47 1.18 - 1.58 2.140 (54) CPR-15 0.709 - 1.000 1.469 (37) CPF-34 0.20 - 0.47 1.38 - 1.77 2.375 (60) Use the information below as a guide to cable or hose sizes and weights. Refer to the National Electrical Code for ampere ratings and other details. 14 AWG. WEIGHT/ft. lbs. (kg) 0.094 (0.04) 0.110 (0.05) 0.144 (0.06) 0.156 (0.07) 0.178 (0.08) 0.202 (0.09) 0.222 (0.10) 0.268 (0.12) 0.278 (0.13) 0.305 (0.14) NO. COND. 2 3 4 5 6 7 8 9 10 DIA. in. (mm) 0.512 (13) 0.538 (14) 0.584 (15) 0.665 (17) 0.710 (18) 0.710 (18) 0.770 (20 0.820 (21 0.885 (22) Type W 8 AWG. DIA. in. (mm) 0.788 (20) 0.894 (23) 0.966 (25) CABLE WIDTH RANGE in. 0.275 - 0.492 Round Cable NO. COND. 2 3 4 CABLE THICK RANGE in. CBR-01 16 AWG. DIA. in. (mm) 0.374 (9) 0.393 (10) 0.427 (11) 0.510 (13) 0.565 (14) 0.605 (15 0.645 (16) 0.720 (18) 0.720 (18) 0.740 (19) for FLAT CABLE BRASS MODELS CBR-02 Round Cable Type SO 600 VOLT NO. COND. 2 3 4 5 6 7 8 9 10 12 CONNECTORS 12 AWG. WEIGHT/ft. lbs. (kg) 0.158 (0.07) 0.184 (0.08) 0.224 (0.10) 0.160 (0.12) 0.302 (0.14) 0.329 (0.15) 0.373 (0.17) 0.414 (0.19) 0.434 (0.20) NO. COND. 2 3 4 5 6 7 8 DIA. in. (mm) 0.586 (15) 0.616 (16) 0.668 (17) 0.725 (18) 0.805 (20) 0.865 (22) 0.920 (23) NO. COND. 2 3 4 NO. COND. 2 3 4 DIA. in. (mm) 0.980 (25) 1.068 (27) 1.166 (30) DIA. in. (mm) 0.872 (22) 0.983 (25) 1.068 (27) Flat Cable NEOPRENE JACKETED AWG NO. THICK x WIDE SIZE COND. in (mm) 4 0.275 (7) x 0.785 (20) 14 12 0.295 (7) x 2.165 (55) WEIGHT/ft. lbs. (kg) 0.181 (.08) 0.557 (.25) 12 4 0.335 (9) x 0.945 (24) 0.268 (.12) 10 4 0.335 (9) x 1.045 (27) 0.335 (.15) 6 4 0.490 (12) x 1.495 (38) 0.739 (33) 4 4 0.550 (14) x 1.810 (46) 1.061 (.48) DIA. in. (mm) 0.638 (16) 0.671 (17) 0.730 (19) 0.796 (20) 0.883 (22) WEIGHT/ft. lbs. (kg) 0.250 (0.11) 0.310 (0.14) 0.371 (0.17) 0.425 (0.19) 0.485 (0.22) 600 VOLT 6 AWG. WEIGHT/ft. lbs. (kg) 0.328 (0.15) 0.470 (0.21) 0.583 (0.26) 10 AWG. WEIGHT/ft. NO. lbs. (kg) COND. 0.204 (0.09) 2 0.244 (0.11) 3 0.282 (0.13) 4 0.322 (0.14) 5 0.380 (0.17) 6 0.435 (0.20) 0.475 (0.21) AWG SIZE 4 AWG. WEIGHT/ft. lbs. (kg) 0.425 (0.19) 0.614 (0.28) 0.769 (0.35) WEIGHT/ft. lbs. (kg) 0.575 (0.26) 0.797 (0.36) 1.019 (0.46) Hose GENERAL PURPOSE PVC JACKETED I.D. in. (mm) BRAID 0.25 (6) 0.38 (10) 0.50 (13) 0.75 (19) 1.00 (25) 1.25 (32) 1.50 (38) 2 2 2 2 2 2 2 NO. COND. 8 12 4 8 12 THICK x WIDE in (mm) 0.22 (6) x 1.16 (29) 0.22 (6) x 1.66 (42) 0.23 (6) x 0.66 (17) 0.23 (6) x 1.23 (31) 0.23 (6) x 1.75 (44) WEIGHT/ft. lbs. (kg) 0.18 (.08) 0.27 (.12) 0.12 (.05) 0.22 (.10) 0.34 (.15) 12 4 8 0.25 (6) x 0.74 (19) 0.25 (6) x 1.39 (35) 0.16 (.07) 0.32 (.14) 10 4 0.29 (7) x 0.91 (23) 0.24 (.11) 8 4 0.39 (9) x 1.24 (31) 0.42 (.19) BRAID 6 I.D. in. (mm) 4 0.45 (11) x 1.50 (38) 0.60 (27) 4 4 0.52 (13) x 1.74 (44) 0.75 (.34) 0.25 (6) 0.38 (10) 0.50 (13) 0.75 (19) 1.00 (25) 1.25 (32) 2 2 2 2 2 2 16 14 O.D. in. (mm 0.57 0.73 0.88 1.16 1.50 1.75 2.00 (14) (19) (22) (29) (38) (44) (51) MAX PRES psi WEIGHT/ft. lbs (kg) 315 315 315 250 150 150 150 0.12 (.05) 0.18 (.08) 0.24 (.11) 0.37 (.17) 0.64 (.29) 1.01 (.45) 1.06 (.48) MAX PRES psi WEIGHT/ft. lbs (kg) 250 250 250 250 150 150 0.13 (.06) 0.18 (.08) 0.24 (.11) 0.37 (.17) 0.64 (.29) 1.01 (.45) SINGLE HYDRAULIC O.D. in. (mm 0.59 0.72 0.84 1.16 1.50 1.75 (15) (18) (21) (29) (38) (44) G l e a s o n R e e l C o r p . 6 0 0 S o u t h C l a r k S t . , M a y v i l l e , W I 5 3 0 5 0 P h o n e : 9 2 0 - 3 8 7 - 4 1 2 0 w w w. h u b b e l l . c o m / g l e a s o n r e e l / e n 24
STEEL TRACK FESTOON SYSTEM KITS TRACK BRACKET-THREE PIECES Supports track to cross arms. CROSS ARMS Supports festoon track every 6'. (Optional.) CROSS ARM TRACK SPLICE Ends of both track sections must be visible through "peep" hole to assure secure splice. BEAM CLAMPS Fasten cross arms to I-beam. Includes track nuts. (Optional.) TOW TROLLEY
button pendants or radio remote controls are available to operate your crane systems. Our Stretch Wire Rope Festoon systems work well for lighter duty applications and installations where a C-Track cannot be installed. Conductix-Wampfler I-Beam Festoon systems and Square Bar Festoon systems are ideal for very demanding environments, such as
Track MasterTM Festoon Systemsare available in three sizes, as shown above, and with either clips for round cables/hoses (series C40-Cand C50- only), cable clamps for flat cables (series C40-F, C50-F, and C60-F), or specially designed clamps for holding a mixed load of hoses, round cables and flat cables (series C50-M and C60-M only). See .
DB Dream Beams ( Ford I-Beams) DJM Complete DJM lowering Kits DS Drop Spindles EH Leaf Spring Eye Hangers EL End Links (for anti sway-bars) FK Complete Flip Kits HS Hanger / Shackle Kits (leaf spring rear ends) K One box complete kits LB Aluminum Lowering Block Kits RK Complete Rear Kits SB Steel Lowering Block Kits SE Shock Extenders SH Leaf .
Cross Arm Brackets, Track Hangers 14 Track Hangers, Anchors, End Stop 15 Flat Cable Trolleys, Tow Bar 16 Round Cable Trolleys, Tow Bar 17-18 Control Unit Trolleys 19 C-Track Systems, Heavy Duty - 70-80 lb per trolley, 300-500 fpm General Layout Illustration 20 Galvanized Track, Joint, Cross Arm Supports 21 Galvanized Track, Hanger/Anchor, End .
For the most current and up to date information visit our website at: www.conductix.us Table of Contents 3 General Information and Pre-Assembled Systems 2 Festoon Specification Checklist & Technical Information 4-6 PVC Flat Cable & Connectors 7 Neoprene Flat Cable & Glands 8 Stretched Wire Rope Systems (load: 10 lbs./20 lbs. speed: 200 fpm.) 9 C-Track Systems
Alu-Track Series ENGINEERED TRACK SYSTEMS Track Options Alu-Track Steel track: rolled from ASTM A572, A607, or A715 grade steel; available with enamel, powder, epoxy, or galvanized coatings Stainless steel track: 304 stainless for 500 Series track for the following systems: Traveling Bridge, Ceiling Mounted Monorails, and Swing Arms
the Ingathering kits for November 5th. We are sending 48 kits this year: 12 Health Kits, 24 School Kits, 12 Sewing Kits and 12 Layettes. If you would like to help with expenses, I will show you what we have spent and what we still need. (All costs are rounded off) Health Kits – Goal 12 complete kits Item/# Needed Est. Cost Total Cost Status
his greatest prestige and popularity with his novel Ariadne, in . identifies with Dorinda’s midlife awakening because she has been through that experience herself: after spending her life trying to live up to the standards of supportive wife, loving mother and perfect hostess that her husband’s elitist circle expected of her, “being my own person only became possible as an idea or a .
