Ladder Fall Arrest System
LADDER FALL ARREST SYSTEM Adding or upgrading your vertical safety systems just got easier. The new generation of Lad-Saf Systems are reengineered to simplify and speed up the installation process. With up to 72% fewer loose components* than Rung, 2 User, Stainless Steel 6116613 Rung, 2 User, Galvanized Steel 6116612 *On specific models. some of our previous models, these lightweight systems are streamlined for easy installation and maintenance on a variety of structures—such as fixed ladders and telecommunication towers. Rung, 4 User, Galvanized Steel 6116614 Monopole, 4 User, Galvanized Steel 6116615 Monopole, 4 User, Stainless Steel 6116619 They have also been designed to meet the requirements of the new ANSI Z359.16 standard when used with our Lad-Saf X2 or X3 sleeve, helping you to stay in compliance with the current fall protection standards. Telescoping Extension, 4 User, Galvanized Steel 6116618 Climb Extension, 2 User, Galvanized Steel 6116617 Ideal to provide access to rooftops through a roof hatch. 844-314-1374 EDGEfallprotection.com Info@edgefallprotection.com
OSHA’S WALKING-WORKING SURFACES FINAL RULING REQUIRES: Install personal fall arrest or ladder safety systems on new and replacement fixed ladders over 24 ft. Replace cages and wells (used as fall protection) with ladder safety or personal fall arrest systems on all fixed ladders over 24 ft. by the year 2036. Contact 3M Fall Protection to learn more. Ladder, Climb Extension and Grab Bar-Telescoping application fit the following rung types and spacing: Rung spacing 9 in.-12.25 in. (200 mm-310 mm) Cylindrical rung 0.75 in.-1.6 in. (19 mm-40 mm) diameter Square rung 0.75 in.-1.6 in. (19 mm-40 mm) Diamond rung 0.75 in.-1.6 in. (19 mm-40 mm) height Angle iron 0.75 in.-1.6 in. (19 mm-40 mm) leg height Rectangular rung 0.75 in.-1.6 in. (19 mm-40 mm) height, 0.75 in.-1.9 in. (19 mm-48 mm) width STREAMLINED DESIGN Convenient Integrated fall arrest-rated anchor point. Fast Installation is easy with fewer loose parts and more robust cable tensioning and termination as compared to our previous systems. Light Total system weighs less than our previous 2- and 4-user systems. New Pre-Swaged Cable Termination Durable, high-strength steel construction that allows for easy installation and maintenance-free longevity. Flexible Mounting brackets can be used on a variety of fixed ladder styles that may consist of different rung spacings and shapes. Simple Most configurations use fewer than 13 separate components—up to 72% less than some of our previous models. Compatible Designed for use with your Lad-Saf X3 Detachable Cable Sleeve (6160054). Also compatible with Lad-Saf X2 Detachable Cable Sleeve (6160030). 844-314-1374 EDGEfallprotection.com Info@edgefallprotection.com
ORDER OPTION 1: CUSTOM CONFIGURED SYSTEMS 1 2 Top & Bottom Bracket System (both brackets included) APPLICATION USER MATERIAL PART # Rung 2 User Galvanized Steel 6116612 Rung 2 User Stainless Steel 6116613 Rung 4 User Galvanized Steel 6116614 Wood Pole 2 User Galvanized Steel 6116616 Monopole 4 User Galvanized Steel 6116615 Monopole 4 User Stainless Steel 6116619 Climb Extension 2 User Galvanized Steel 6116617 Telescoping Extension 4 User Galvanized Steel 6116618 Pre-swaged cable at desired length First 4 numbers in SKU represent the cable type, last 3 numbers represent cable length in feet. PART # 6104XXX 6105XXX 6106XXX 6107XXX Diameter 3/8 in. (9.5 mm) 3/8 in. (9.5 mm) 3/8 in. (9.5 mm) 3/8 in. (9.5 mm) Strand 1x7 1x7 7 x 19 7 x 19 Steel Galvanized Stainless Galvanized Stainless Preformed Left, Regular Lay Left, Regular Lay Right, Regular Lay Right, Regular Lay Compliance RR-W-410 RR-W-410 RR-W-410 RR-W-410 Breaking strength 15,400 lbs. min. 18,000 lbs. min. 14,400 lbs. min. 12,000 lbs. min. Lifeline cable offered in: 10-100 ft. in 5 ft. increments 100-200 ft. in 10 ft. increments Over 200 ft. in 20 ft. increments 3 4 Cable guides as needed (recommend every 20-40 feet) APPLICATION(S) TYPE MATERIAL PART # Ladder Straight Guide Galvanized Steel 6100400 Ladder Straight Guide Stainless Steel 6100457 Ladder L Guide Stainless Steel 6100513 Ladder Straight Guide Galvanized Steel 6100530 Telescoping & Extension Straight Guide Stainless Steel 6100401 Monopole L Guide Galvanized Steel 6100515 Wood Pole Straight Guide Stainless Steel 6100140 Additional cable guides available. Contact your 3M Fall Protection Sales Representative for more information. Hollow rung ladder supports May be required for additional support. Contact your 3M Fall Protection Sales Representative for more information. 844-314-1374 EDGEfallprotection.com Info@edgefallprotection.com
ORDER OPTION 2: COMPLETE SYSTEMS One SKU. One full system. Simple. Ordering a complete 2-user ladder and cable system is now even easier. We offer our most popular systems and lengths including all bracketry, cable, and guides—all in one single SKU. Galvanized Steel: 6116612: Rung, 2-User 6104XXX: 1 x 7 Swaged Cable, 3/8 in. 6100400: Cable Guide for fixed ladder (1 per 30 ft.) CABLE LENGTH GUIDES INCLUDED SKU 20 FT. 30 FT. 40 FT. 50 FT. 60 FT. 70 FT. 80 FT. 90 FT. 100 FT. 0 1 1 1 2 2 2 3 3 6118020 6118030 6118040 6118050 6118060 6118070 6118080 6118090 6118100 Stainless Steel: 6116613: Rung, 2-User 6105XXX: 1 x 7 Swaged Cable, 3/8 in. 6100457: Cable Guide for fixed ladder (1 per 30 ft.) CABLE LENGTH GUIDES INCLUDED SKU 20 FT. 30 FT. 40 FT. 50 FT. 60 FT. 70 FT. 80 FT. 90 FT. 100 FT. 0 1 1 1 2 2 2 3 3 6119020 6119030 6119040 6119050 6119060 6119070 6119080 6119090 6119100 844-314-1374 EDGEfallprotection.com Info@edgefallprotection.com
EDGE VERTICAL LADDER KITS EDGE Latchways Vertical Ladder Kits provide an easy-to-install solution when fall protection is necessary for climbing activities on fixed ladders. A vertical lifeline allows movement up and down the entire height of the line, eliminating the need to disconnect and find new tie-off points while ascending or descending a ladder. In the event of a fall, the climbing device automatically engages the vertical lifeline and locks, arresting the fall and potentially saving a life. These vertical ladder kits come in multiple lengths for different ladder heights and must be used in conjunction with the Latchways LadderLatch climbing device. The LadderLatch climbing device is a device for use on all Latchways vertical systems. It incorporates the unique starwheel, allowing the unit to pass over cable supports without the need to detach. It also includes an anti-inversion mechanism so the device cannot be connected to the cable upside down. The Latchways LadderLatch is SOLD SEPARATELY. KIT ORDERING INFORMATION Vertical Ladder System Kits PART # 30901-00 30902-00 30903-00 30904-00 30905-00 Size 20 ft (6 m) 40 ft (12 m) 55 ft (17 m) 75 ft (22 m) 90 ft (27 m) Extension Post—Vertical Ladder System Kits PART # 31901-00 31902-00 31903-00 31904-00 31905-00 Size 20 ft (6 m) 40 ft (12 m) 55 ft (17 m) 75 ft (22 m) 90 ft (27 m) Extension Posts are necessary for ladders where the the top rung does not give the necessary clearance required to step on to the surface area. The user will need additional height for the fixed ladder in order to step onto the surface area and detach properly. APPROVALS ANSI Z359.1 CSA Z259.2.5 Meets OSHA 1910.28 – Walking/Working Surfaces Standard WE INSTALL TOO! Let us do it for you. Call to get a quote for our professional installation services. Vertical ladder system Vertical ladder system with extension post 844-314-1374 EDGEfallprotection.com Info@edgefallprotection.com
KIT COMPONENTS Galvanized top anchor Top anchor fixing kit Lifeline absorber assembly with stainless steel cable attached Ladder mount intermediate gate Cable guide fixing kit Bottom anchor assembly Bottom anchor fixing kit System label kit Galvanized extension post Extension post fixing kit TOOLS REQUIRED 2 x 19 mm wrench 1 x 5 mm security head allen key 2 x adjustable wrench—adjustable to 1¼" (30 mm) 1 x 17 mm deep socket Cable cutters Long nose pliers Torque wrench capable of applying 14.75 ft lb (20 Nm) Note: This Bulletin contains only a general description of the products shown. While uses and performance capabilities are described, under no circumstances shall the products be used by untrained or unqualified individuals and not until the product instructions including any warnings or cautions provided have been thoroughly read and understood. Only they contain the complete and detailed information concerning proper use and care of these products. ATTACHMENT DEVICE (SOLD SEPARATELY) Latchways attachment devices are designed to connect the user, wearing a full body harness, to a Latchways cable system. These devices allow hands-free operation for system users. The unique starwheel allows the device to pass over cable supports without the need to detach. CAUTION: The Latchways LadderLatch device is the only approved attachment device for use with MSA Latchways Vertical Ladder Kits. PART NUMBER CONFORMANCE 3104L-00 ANSI – Z359.1-2007 3103L-00 CSA – Z259.2.5-12 844-314-1374 EDGEfallprotection.com Info@edgefallprotection.com
OSHA'S WALKING-WORKING SURFACES FINAL RULING REQUIRES: STREAMLINED DESIGN Ladder, Climb Extension and Grab Bar-Telescoping application fit the following rung types and spacing: Rung spacing 9 in.-12.25 in. (200 mm-310 mm) Cylindrical rung 0.75 in.-1.6 in. (19 mm-40 mm) diameter Square rung 0.75 in.-1.6 in. (19 mm-40 mm)
OALS-775 Outside Arm Ladder System for 7-3/4" Ladder Combination OALS-975 Outside Arm Ladder System for 9-3/4" Ladder Combination OALS-1200 Outside Arm Ladder System for 12" Ladder Combination Systems are also available for customers wishing to make their own ladder racks. These Systems have no rack provided by ZICO: MODEL DESCRIPTION
4. Ladder Rise and Extension EXERCISE A - LADDER RISE The ideal training for this task requires an actual 12-foot aluminum extension ladder. If this size ladder is unavailable, you can use a single ladder or smaller extension ladder to practice the skill required raising the ladder. Practice of the ladder
6 HUSKY 10' Fiberglass Step Ladder 7 WERNER 6' Electro -Master Fiberglass Step Ladder 8 WERNER 6' Fiberglass Step Ladder 9 WERNER 6' Fiberglass Step Ladder 10 WERNER 4' Fiberglass Step Ladder 11 WERNER 16' Fiberglass Extension Ladder 12 LOUISVILLE 11 -Step Safety Ladder 13 ULINE 5 -Step Safety Ladder
Figure 6 Continued - Add Ladder Winch 3.0 Ladder System Assembly - Continued Cable Cable. 14 Feed the cable down the pulley at the . Substitute a crane or forklift to erect the ladder on the base. WARNING Do not stand under the ladder while assembling. Add the lifting kit to the base of the ladder
OSHA 1926.502 & 1910.140 Requirements MBS - 2,700 lbs. . Figure 1 illustrates the 3M DBI-SALA Ladder Anchor. The Ladder Anchor is a single point anchorage connector for a personal fall arrest system designed to be attached to a fixed metal ladder on a structure.
Program File List Page 10 Wednesday, December 23, 2015 - 10:25:21 Name Number Type Rungs Debug Bytes [SYSTEM] 0 SYS 0 No 0 1 SYS 0 No 0 2 LADDER 50 No 970 3 LADDER 90 No 4311 4 LADDER 41 No 1848 5 LADDER 41 No 1764 6 LADDER 27 No 1000 7 LADDER 37 No 2094 8 LADDER 16 No 746 .
Fall Protection Categories All fall protection products fit into four functional categories. 1. Fall Arrest; 2. Positioning; 3. Suspension; 4. Retrieval. Fall Arrest: A fall arrest system is required if any risk exists that a worker may fall from an elevated position, as a general rule, the fall
2 Types of Ladders Portable ladder: A ladder that can be readily moved or carried. Orchard ladder: A three-legged portable ladder used in orchards that can be readily moved or carried. Fixed ladder: A ladder that cannot be readily moved or carried because it is an
