Computer Monitor-Page 4
positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
hp pavilion f50/f70 LCD Monitor Setting Up the Monitor Setting Up the Monitor Place the monitor on a flat, sturdy surface. Ensure that the operating site is free from excessive heat and moisture. For best performance, make sure nothing is resting on the monitor. WARNING: Before you connect any cables or install the HP
6 3M Dual Conductor Remote Input Jack 733 (optional) Figure 1 – 3M Workstation Monitor 724 with remote input jacks. 3M Dual Conductor Remote Input Jack 732 3M Workstation Monitor 724 SECTION 1 Theory of Operation The 3M Workstation Monitor 724 (Figure 1) is designed to monitor the operati
HP 24uh 24in LED Monitor 119.99 HP Home & Home Office HP 25er 25in IPS LED Backlit Monitor 159.99 HP Home & Home Office HP 27er 27in IPS LED Backlit Monitor, Ultra Wide Viewing Monitor, Edge-to-Edge Monitor 160.00 HP Home &
Document version 6.3 Dated 2011-08-08 Page 1 of 6 JTB Process Monitor About JTB Process Monitor makes it possible to monitor usage of more applications than the core JTB FlexReport handles. There is a service part and a client part of Process Monitor.
instructions that came with the cable lock to at tach it. Setting up your monitor This section provides information to help you set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, troubleshooting and Warranty Guide before carrying out this procedure. 1.
3. Using the Monitor 3-1 Get to know the monitor The Monitor connectors are located on the rear side. They are shown in the physical monitor as figure below and described in the following paragraphs. Please note that connectors may vary in some derivative models; please refer to individual leaflet f
and power-saving energy management into a light-weighted LCD monitor. The LCD video monitor uses color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance. Features TFT LCD panel Composite video input/ output (for security monitor
stable enough to support the weight of the monitor. Turn off the monitor and the power before disconnecting the cables from the LCD monitor. Always unplug the product from the power ou tlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive
1.Plug the end of the power cable into the monitor. 2.Plug the 9-30V cigarette lighter adapter into the cigarette lighter socket. 3.Press the ON/OFF button to turn the monitor ON and OFF. Hard Wired to Fuse Box Using the Monitor's ON/OFF Switch(Fig. 1) Fig. 1 This Schematic is for hard wiring the monitor directly to the vehicle's fuse box.
Acer LCD Monitor Quick Start Guide (QSG) Important safety instructions Please read the following instructions carefully. 1. To clean the LCD monitor screen: Turn off the LCD monitor and unplug the power cord. Spray a non-solvent cleaning solution onto a rag and clean the screen gently. 2. Do not place the LCD monitor near a window.