Weld-in Adapter And Flanges - Endress Hauser
Technical InformationWeld-in adapter and FlangesLevel and PressureApplicationThe weld-in adapters and the flanges are used to connectlevel or pressure sensors to a vessel or a pipe.TI00426F/00/EN/14.1271187821Your benefits High-quality, corrosion resistant materials for use inaggressive media Versions without crevices and dead space of the weldin adapters according to international hygieneregulations A variety of seals for application in diverse processes Flanges are specified according to both flangestandards DIN/EN
Weld-in adapter and FlangesTable of contentsWeld-in adapter - overview level . . . . . . . . . . . . . . . . . 4Weld-in adapter and accessories - level . . . . . . . . . . . . 6G ¾", d 29 without flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6G ¾", d 50 with flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6G ¾", d 55 with flange for flush-mounted installation . . . . . . . . . 7G 1", d 53 without flange for pipe-mounting . . . . . . . . . . . . . . . 7G 1", d 60 with flange for flush-mounted installation with sealingsurface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8G 1" sensor can be positioned . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8RD 52 sensor can be positioned . . . . . . . . . . . . . . . . . . . . . . . . . . 9UNI D85 universal process connection . . . . . . . . . . . . . . . . . . . . . 9UNI D65 universal process connection . . . . . . . . . . . . . . . . . . . . 10M24 D65 universal process connection . . . . . . . . . . . . . . . . . . . 10DRD DN50 (65 mm (2.56 in))for flush-mounted installation of devices with DRD-flange . . . . . . 11Weld-in adapter - overview pressure . . . . . . . . . . . . . 12PN63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PN100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASME flanges (ASME B16.5-2009) . . . . . . . . . . . . . . . . . . . . . .Class 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Class 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Class 600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Class 900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Class 1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .JIS flanges (B 2220) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282930303131323233333334Adapter flange FAU70 . . . . . . . . . . . . . . . . . . . . . . . . 35FAU70E Version with metrical thread . . . . . . . . . . . . . . . . . . . . 35FAU70A Version with conical thread . . . . . . . . . . . . . . . . . . . . . 35Slip-on flange FAU80 . . . . . . . . . . . . . . . . . . . . . . . . . 36FAU80 Version slip-on flange . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Weld-in adapter and accessories - pressure. . . . . . . . 14UNI D85 universal process connection . . . . . . . . . . . . . . . . . . . . 14UNI D65 universal process connection . . . . . . . . . . . . . . . . . . . . 14UNI 6" D85 universal process connection . . . . . . . . . . . . . . . . . . 15DRD DN50 (65 mm (2.56 in))for flush-mounted installation of devices with DRD-Flange . . . . . 15G 1½" flush-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16G 1", d 60 with flange for flush-mounted installationwith sealing surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16G ½" flush-mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17G 1" flush-mounted with metallic sealing taper . . . . . . . . . . . . . . 17Welding hints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Screw in flange FAX50 . . . . . . . . . . . . . . . . . . . . . . . 37FAX50 universal flangeDIN - ASME - JIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G ¾", NPT ¾" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G 1", NPT 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G 1½", NPT 1½" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G 2", NPT 2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3737373838Pressure-temperature dependencies . . . . . . . . . . . . . 40EN flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ASME flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40JIS flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Weld-in dummy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Welding procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Install measuring device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Pressure resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Suitable for hygienic processes . . . . . . . . . . . . . . . . . . . . . . . . . . 20Flange - Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Flange Norm DIN EN 1092-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Height of raised face . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Mechanical Construction . . . . . . . . . . . . . . . . . . . . . . 23DIN flanges (DIN 2527) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23PN10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23PN16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24PN25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24PN40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25PN64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25PN100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26EN flanges (DIN EN 1092-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . 27PN16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27PN25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27PN40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282Endress Hauser
Weld-in adapter and FlangesWeld-in adapter - overview levelNote!All dimensions are indicated in mm (in) unless otherwise noted.a0008246MaterialRoughness μm (μin) process sideWithout inspection certificateEN10204-3.1 materialWith inspection certificateEN10204-3.1 material 3)Seal (5 pieces)(One seal is included in scope ofdelivery.)Weld-in dummya0008251a0008256a0011924a0011924a0008253G ¾", d 29without flangeG ¾", d 50with flangeG ¾", d 55with flangeG 1", d 53without flangeG 1", d 60with flangeG 1"adjustable316L (1.4435)316L (1.4435)316L (1.4435)316L (1.4435)316L (1.4435)316L (1.4435)1.5 (59.1)0.8 (31.5)0.8 (31.5)0.8 (31.5)0.8 (31.5)0.8 (31.5)––52001052–52001051 1)52001221 2)5202829552018765520118977109312952011896 )52011898 )Silicone O-ring52021717Silicone O-ring52021717Silicone O-ring52014473Silicone O-ring52014472Silicone O-ring52014472Siliconeprofile 167DeviceFeatureVersionLiquicap W2GW2GW2FMI52050LiquipointFTW33620Liquiphant T/MFTL20H0201)Replace the weld-in adapter with order number 917969-1000.2)Replace the weld-in adapter with order number 215159-0000.3)AD2000: The material 316L (in contact with process) corresponds to AD2000 – W0/W2.Endress Hauser3
Weld-in adapter and FlangesLevel 4RD52Uni D85Uni D65M24 D65DRD DN5065 mm (2.56 in)(weld-in flange)316L (1.4435)316L (1.4435)316L (1.4435)316L (1.4435)316L (1.4435)304 (1.4301)0.8 (31.5)0.76 (29.9)0.76 (29.9)0.8 (31.5)0.76 (29.9)Without inspection certificateEN10204-3.1 material52001047 ith inspection certificateEN10204-3.1 material 2)52006909 )52010173520101747104138352011899/ –Seal (5 pieces)(One seal is included in scope of delivery.)Siliconeprofile gasket52014424Siliconeprofile gasket52023572Siliconeprofile gasket52023572–PTFEflat ialRoughness μm (μin) process sideWeld-in dummyDeviceFeatureVersionLiquicap -PE2050FTI5xLiquipointFTW33620Liquiphant T/MFTL20HFTL330x020FTL5xHLevelflex J-LevelflexFMP531)Replace the weld-in adapter with order number 942329-0001.2)AD2000: The material 316L (in contact with process) corresponds to AD2000 – W0/W2.4Endress Hauser
Weld-in adapter and FlangesWeld-in adapter and accessories - levelG ¾", d 29 without flangeDimensions mm (in)30 (1.2)ø29 (1.1)ø26 (1.0)G ¾“ISO 228ø32 (1.3)25.2 (1.0)a0008265 max. 25 bar (362 psi) /max. 150 C (302 F)VersionOrder number AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 1.5 μm (59.1 μin)52028295Silicone O-ring, 14.9 x 2.7 mm (0.59 x 0.11 in)Material: VMQ75, FDA52021717(5 pieces) For this version a simple replacementof the seal is possible.FDA approved materials according to 21 CFR Part 175-178 max. 40 bar (580 psi) /max. 100 C (212 F)Alternative sealsOrder number 15.08 x 2.62 mm (0.59 x 0.10 in)Material: EPDM, FDAMVT2L1934(5 pieces) 15.08 x 2.62 mm (0.59 x 0.10 in)Material: Viton, FDAMVT2L1942(5 pieces) 14.9 x 2.7mm (0.59 x 0.11 in)Material: Silicone, VMQ80, FDA, USP Class VI71086117(3 pieces)Pressure ringMaterial: 316L (1.4435)52027421 The seal with pressure ring enables easy exchangeof defective sealing rings.G ¾", d 50 with flangeDimensions mm (in)26 (1.0)ø50 (2.0)G ¾“ISO 228ø32 (1.3)21 (0.8)VersionOrder number AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 0.8 μm (31.5 μin)52018765Silicone O-ring 14.9 x 2.7 mm (0.59 x 0.11 in)Material: VMQ75, FDA52021717(5 pieces) For this version a simple replacementof the seal is possible.a0008810FDA approved materials according to 21 CFR Part 175-178Certificate: EHEDG, 3A max. 25 bar (362 psi) /max. 150 C (302 F)Alternative sealsOrder number max. 40 bar (580 psi) /max. 100 C (212 F) 15.08 x 2.62 mm (0.59 x 0.10 in)Material: EPDM, FDAMVT2L1934(5 pieces) 15.08 x 2.62 mm (0.59 x 0.10 in)Material: Viton, FDAMVT2L1942(5 pieces) 14.9 x 2.7 mm (0.59 x 0.11 in)Material: Silicone, VMQ80, FDA, USP Class VI71086117(3 pieces)Pressure ringMaterial: 316L (1.4435)52027421 The seal with pressure ring enables easy exchangeof defective sealing rings.Endress Hauser5
Weld-in adapter and FlangesLevel (continued)G ¾", d 55with flange for flush-mountedinstallationDimensions mm (in)26 (1.0)ø55 (2.2)G ¾“ISO 228ø32 (1.3)21 (0.8)VersionOrder number AISI 316L (1.4435) Roughness (process side): Ra 0.8 μm (31.5 μin)52001052 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 0.8 μm (31.5 μin)52011897Silicone O-ring, 21.89 x 2.62 mm(0.86 x 0.10 in)Material: VMQ70, FDA52014473 (5 pieces)Sensor dummy for welding the welding bossMVT2L0692a0008274 max. 25 bar (362 psi) /max. 150 C (302 F)FDA approved materials according to 21 CFR Part 177.1550/2600Certificate: EHEDG, 3A max. 40 bar (580 psi) /max. 100 C (212 F)G 1", d 53without flange forpipe-mountingDimensions mm (in)ø53 (2.1)G 1"ISO 228ø41 (1.6)21 (0.8)ø50 (2.0)24.6 (1.0)30 47.8 (1.9)a0011927 max. 25 bar (362 psi) /max. 150 C (302 F) max. 40 bar (580 psi) /max. 100 C (212 F)6Alternative seals 21.89 x 2.62 mm (0.86 x 0.10 in)Order numberMaterial: EPDM-70, FDA, USP Class VI71140670 (3 pieces)Material: Kalrez Comp. 2035MVT2L0666Material: VitonMVT2L0655Material: Viton/FEP-FEK 75 ShoreMVT2L1748Material: Silicone, VMQ23-70, FDA, USP Class VI71086100 (3 pieces)VersionOrder number AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 0.8 μm (31.5 μin)71093129Silicone O-ring, 28.17 x 3.53 mm(1.11 x 0.14 in)Material: VMQ70, FDA52014472(5 pieces)Sensor dummy for welding the welding bossMVT2L0691FDA approved materials according to 21 CFR Part 177.1550/2600Certificate: EHEDG, 3AAlternative seals 28.17 x 3.53 mm(1.11 x 0.14 in)Order numberMaterial: EPDM-70, FDA, USP Class VI71140668 (3 pieces)Material: Viton665, FDAMVT2L0705(5 pieces)Material: Viton, FDA, USP Class VI, 3AMVT2L1682Material: Kalrez comp. 4079MVT2L0567Material: Silicone, VMQ23-70, FDA, USP Class VI71086102 (3 pieces)Endress Hauser
Weld-in adapter and FlangesLevel (continued)G 1", d 60with flangefor flush-mounted installationwith sealing surfaceDimensions mm (in)29.6 (1.2)ø60 (2.4)G 1"ISO 228ø41 (1.6)24.6 (1.0)a0008267 max. 25 bar (362 psi) /max. 150 C (302 F) max. 40 bar (580 psi) /max. 100 C (212 F)Dimensions mm (in)ø65 (2.56)5 (0.2)26 (1.02)G 1"sensor can be positionedVersionOrder number AISI 316L (1.4435) Roughness (process side): Ra 0.8 μm (31.5 μin)52001051 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 0.8 μm (31.5 μin)52011896Silicone O-ring, 28.17 x 3.53 mm (1.11 x 0.14 in)Material: VMQ70, FDA52014472(5 pieces)Sensor dummy for welding the welding bossMVT2L0691FDA approved materials according to 21 CFR Part 177.1550/2600Certificate: EHEDG, 3AAlternative seals 28.17 x 3.53 mm(1.11 x 0.14 in)Order numberMaterial: EPDM-70, FDA, USP Class VI71140668(3 pieces)Material: Viton665, FDAMVT2L0705(5 pieces)Werkstoff: Viton, FDA, USP Class VI, 3AMVT2L1682Material: Kalrez comp. 4079MVT2L0567Material: Silicone, VMQ23-70, FDA, USP Class VI71086102(3 pieces)VersionOrder number AISI 316L (1.4435) Roughness (process side): Ra 0.8 μm (31.5 μin)52001221 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 0.8 μm (31.5 μin)52011898Silicone profile gasket 29 x 36 x 3.7 mm(1.14 x 1.42 x 0.15 in)Material: SI-60, FDA52014424(5 pieces)Sensor dummy for welding the welding bossM40167FDA approved materials according to 21 CFR Part 177.1550/2600Certificate: EHEDG, 3AAlternative seals 29 x 36 x 3.7 mm(1.14 x 1.42 x 0.15 in)Order numberMaterial: EPDM-60, FDA52012805Material: Silicone, VMQ60, FDA, USP Class VI71075662(5 pieces)a0008272 max. 25 bar (362 psi) /max. 150 C (302 F) max. 40 bar (580 psi) /max. 100 C (212 F)Endress Hauser7
Weld-in adapter and FlangesLevel (continued)RD 52sensor can be positionedDimensions mm (in)ø65 (2.5)RD 52 x 1 6ø42.3 (1.7)4.5 (0.2)a0008271 AISI 316L (1.4435) Roughness (process side): Ra 0.8 μm (31.5 μin)52001047 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 0.8 μm (31.5 μin)52006909Silicone profile gasket 29 x 36 x 3.7 mm(1.14 x 1.42 x 0.15 in)Material: SI-60, FDA52014424(5 pieces)Sensor dummy for welding the welding bossM40167 max. 25 bar (362 psi) /max. 150 C (302 F)FDA approved materials according to 21 CFR Part 177.1550/2600 max. 40 bar (580 psi) /max. 100 C (212 F)Alternative seals 29 x 36 x 3.7 mm(1.14 x 1.42 x 0.15 in)Order numberMaterial: EPDM-60, FDA52012805Material: Silicone, VMQ60, FDA, USP Class VI71075662(5 pieces)VersionOrder number AISI 316L (1.4435) 85 mm (3.35 in) Roughness (process side): Ra 0.76 μm (29.9 μin)52006262 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material 85 mm (3.35 in) Roughness (process side): Ra 0,76 μm (29.9 μin)52010173Silicone profile gasket 34 x 41.5 x 6.4 mm(1.34 x 1.63 x 0.25 in)Material: SI-60, FDA, USP Class VI-70C, 3A52023572(5 pieces)Sensor dummy for welding the welding boss71114210Dimensions mm (in)39.5 (1.5)ø85 (3.4)ø44 (1.7)RD 52 x1612 (0.5)a0009985 max. 16 bar (232 psi) /max. 150 C (302 F)8Order number For this version a simple replacementof the seal is possible. 25.3 (1.0)UNI D85universal process connectionVersionFDA approved materials according to 21 CFR Part 177.1550/2600Certificate: EHEDG, 3AAlternative seals 34 x 41.5 x 6.4 mm(1.34 x 1.63 x 0.25 in)Order numberProfile gasketMaterial: EPDM-70, FDA, USP Class VI71100719(5 pieces)Endress Hauser
Weld-in adapter and FlangesLevel (continued)UNI D65universal process connectionDimensions mm (in)39.5 (1.5)ø65 (2.5)RD 52 x 1 6ø44 (1.7)8.0 (0.3)a0008264 max. 16 bar (232 psi) /max. 150 C (302 F)VersionOrder number AISI 316L (1.4435) 65 mm (2.56 in) Roughness (process side): Ra 0.76 μm (29.9 μin)214880-0002 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material 65 mm (2.56 in) Roughness (process side): Ra 0.76 μm (29.9 μin)52010174Silicone profile gasket 34 x 41.5 x 6.4 mm(1.34 x 1.63 x 0.25 in)Material: SI-60, FDA, USP Class VI-70C, 3A52023572(5 pieces)Sensor dummy for welding the welding boss71114210FDA approved materials according to 21 CFR Part 177.1550/2600Certificate: EHEDG, 3AM24 D65universal process connectionDimensions (mm)ø65 (2.5)M24x1.531 (1.2)8.5 (0.3)Alternative seals 34 x 41.5 x 6.4 mm(1.34 x 1.63 x 0.25 in)Order numberProfile gasketMaterial: EPDM-70, FDA, USP Class VI71100719(5 pieces)VersionOrder number AISI 316L (1.4435) 65 mm (2.56 in) Roughness (process side): Ra 0.8 μm (31.5 μin)71041381 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material 65 mm (2.56 in) Roughness (process side): Ra 0.8 μm (31.5 μin)7104138317 (0.7)a0008551 max. 25 bar (362 psi) /max. 150 C (302 F)Endress Hauser9
Weld-in adapter and FlangesLevel (continued)Dimensions mm (in)VersionOrder number AISI 316L (1.4435) Roughness (process side): Ra 0.76 μm (29.9 μin)52002041 AISI 316L (1.4435) with inspection certificateEN10204-3.1 material Roughness (process side): Ra 0.76 μm (29.9 μin)52011899 AISI 304 (1.4301) Roughness (process side): Ra 0.8 μm (31.5 μin)916743-0000Flat seal 50 x 65 x 1 mm (1.97 x 2.56 x 0.04 in)Material: PTFE, FDA52024228(5 pieces)Pressure sensor dummy for welding the welding boss7111420945 ø84 (3.3)ø125 (4.9)ø50 (2.0)ø66 (2.6)20 (0.8)15 (0.6)ø105 (4.1)DRD DN50(65 mm (2.56 in))for flush-mounted installationof devices with DRD-flange3 (0.1)FDA approved materials according to 21 CFR Part 177.1550/260012 (0.5)4 x M104 x 90 ( 360 )16 (0.6)a0008263 max. 25 bar (362 psi) /max. 150 C (302 F) max. 40 bar (580 psi) /max. 100 C (212 F)10Endress Hauser
Weld-in adapter and FlangesWeld-in adapter - overview 008248a0008249a0008250G 1"d 60with flangeG 1"flushmounted(sealing taper)G ½"flushmountedUni D85Uni D65Uni 6" D85DRD DN5065 mm(2.56 in)(weld-in flange)316L(1.4435)316L(1.4435)316L(1.4435)316L (1.4435)304 .4435)0.76 (29.9)0.76 (29.9)0.76 (29.9)0.76 (29.9)0.8 (31.5)0.8 (31.5)0.8 (31.5)0.8 (31.5)Without inspectioncertificateEN10204-3.1 -000052024469520010515200508752002643With inspection certificateEN10204-3.1 Material 1)52010173520101747111417152011899/ –52024470520118965201017152010172Siliconeprofile gasket52023572Siliconeprofile gasket52023572Silic
Material: EPDM-70, FDA, USP Class VI 71140668 (3 pieces) Material: Viton665, FDA MVT2L0705 (5 pieces) Werkstoff: Viton, FDA, USP Class VI, 3A MVT2L1682 Material: Kalrez comp. 4079 MVT2L0567 Material: Silicone, VMQ23-70, FDA, USP Class VI 71086102 (3 pieces) ø41 (1.6) G 1" ISO 228 ø60 (
3825-34, Chrysler 3 Adapter 3825-12, Ford EEC Adapter 3825-16, Ford ABS Adapter 3421-93, Kia Adapter 3825-11, MECS ABS Adapter 3825-13, Geo-Isuzu Adapter 3825-14, Mazda MECS Adapter 3825-15, Universal 9 Pin Adapter 3825-17, Toyota DCL 1/ Adapter 3825-18, Toyota DCL 2/ Adapter 3825-19, Mitsubishi/ Chrysler “Y” Adpater 3825-20, Nissan 1 Adapter
707 SW 19th Ave. Williston, FL 32696 1-800-FLANGE1 352-528-4100 www.ancorp.com 5 QF63 Flanges QF80 Flanges QF100 Flanges QF160 Flanges QF200 Flanges ANCORP now offers quick flanges up to size QF200 (8 inch tube outer diameter). ISO standards only
Flanges CL150 ASME B16.5 Note 1: Socket weld flanges up to 3" in this pressure rating. Note 2: For Lapped flanges, add 1.6mm to tf dimension. Note 3: Threaded Flanges shall have a taper pipe thread conforming to ASME B1.20.1 Pipe Refer to ASME B36 - 10 / B36 - 19 or as specified by purchaser No counter bore required on threaded flanges .
Weld-in adapter and Flanges Endress Hauser 5 Weld-in adapter and accessories - level G ¾", d 29 without flange G ¾", d 50 with flange Dimensions mm (in) Version Order number
The optional chain can be adapted to the WELD CRAWLER (ZGN-SCN-WELD CRAWL ER). The chain can be used on a pipe that is up to 48" in diameter. 10048079 ZGN-SCN-WELD CRAWLER- OPT-AXIAL The axial weld solution option allows axial weld inspection using the WELD CR AWLER base (ZGN-SCN-WELD CRAWL
Metallic butterfly valves BS EN 1092-1:2007 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges BS EN 12516:2005 Series Industrial Valves .
RF GORE DIN Swivel flanges Fixed flanges Flange gasket Swivel flanges Fixed flanges Flange gasket. FLANGES DIMENSIONS EN-DIN PN ASTM EN-DIN PN 6 EN-DIN PN 10 EN-DIN PN 16 EN-DIN PN 25 EN-DIN PN 40 ND D K N D2 D K N D2 D K N D2 D K N D2 D K N D2 1/2" 15 80 55 4 11 95 65 4 14 95 65 4 14 95 65 4 14 95 65 4 14
DAM-G 52 Male Adapter DAM-U 53 Male Adapter DAM-UO 53 Female Adapter DAF-N 54 Female Adapter DAF-R 55 Female Adapter DAF-GR 55 Female Gauge Adapter DAF-GG 56 Elbow Adapter DLA 57 Run Tee Adapter DTRA 57 Branch Tee Adapter DTBA 57 All dimensions are in millimeters unless othe
