SMPM - Cristek Interconnects, Inc.
SMPMSMPM29
SMPMApplication NotesSMPM High Frequency Push-onThe SMPM connector, which is 30% smaller than its cousin, the SMPM, hassimilar features and applications. This is a multi-functional high frequencypush-on connector suitable for use in a variety of applications. This ultraminiature connector can be used for applications ranging from hermeticmodules to backplanes, and because of its diminutive size, it is ideal forconnectors, the frequency range of the connector is not limited by thepush on, blind mate construction. These deceptively robust connectors aredesigned to mate tightly and maintain performance through 65 GHzModule to Module (board to board)One of the benefits of the SMPM connector is its ability to join two RF/Microwave Modules or PC Boards to one another without the use ofcables. In the past this was difficult and/or costly because of the tolerancesnecessary to ensure good alignment between modules or boards. The keycomponent used in this application is an inseries female to female SMPMadapter called a “Bullet”. The bullet is a unique connector that can be usedto join two micro-wave modules or boards together by placing the bulletbetween two SMPM Male connectors or shrouds. This method produces atight, compact arrangement.MisalignmentThe SMPM’s ability to tolerate axial and radial misalignment whilemaintaining microwave performance is one of the key’s to it industrypopularity. The SMPM accommodates axial and radial misalignment withoutthe use of bulky springs or other alignment tools. This is why it is possibleto use these connectors in module to module (board to board) applications.Although the bullet fits tightly into the mating shroud, by design, it hasthe ability to move slightly while maintaining its performance. This slightradial and axial movement gives the SMPM bullet its “Float”. When installedproperly, the standard SMPM bullet/shroud combination can withstand .010”(.25mm) Axial and .010” (.25mm) Radial float.888.265.9162 CRISTEK.COMSMPM“gang” or multi-connector configurations. Unlike other push-on type
SMPMApplication NotesDetentsThe SMPM has two types of detent as specified in MIL-STD-348. The detentsare the Full and Smooth Bore. The full detent gives the largest insertionand withdrawal forces while the smooth bore gives the least. Each detent isSMPMFull Detentdeveloped for specific purposes depending on the application. The smoothbore is used on many blindmate applications where increased axial andradial float is needed. To provide assurance that the bullet will stay on one ofthe modules, the full detent SMPM male shroud is used on one module anda smooth bore shroud is used on the other. This will ensure when modulesare taken apart that the bullet will stay with the full detent shroud. FullSmooth Boredetents are used when withdrawal forces need to be high such as when aSMPM female cabled connector is used.Hermetic SealsIn some cases it is important to have a hermetic module which createshigh expense and extreme difficulty for most connectors. In the case ofthe SMPM, it is an easy process to create an hermetic module. All that isnecessary is a .012” glass feed through and shroud. The glass feed throughis fired or soldered in the housing just as any other feed through. The shroudis then placed around the feed through, creating the SMPM male connector.Performance is improved over other hermetic seals since the center pin ofthe feed through is the male contact and no additional contacts or insulatorsare needed.Cable ConnectorsThe SMPM may also be used for cable assemblies. These assemblieshave the advantage of being quick disconnects while still maintainingperformance at frequency ranges higher than other push on type connectors.The full detent is used when mating an SMPM cable assembly so that it willmaintain the maximum retention.CRISTEK.COM 888.265.9162
SMPMSMPM Connector Performance SpecificationsElectrical50 OhmsDC to 65 GHz6.0 milliohms325 Volts RMS Min.125 Volts RMS Min.125 Volts RMS Min.200 Volts RMS Min.5000 MegohmsSMPMImpedanceOperating FrequencyCenter Contact ResistanceDielectric Withstanding Voltage (60 Hz)Sea level70,000 ftCorona Extinction Voltage (70,000ft)RF High Potential Voltage (5MHz)Insulation ResistanceVoltage RatingSea level70,000 ftRF leakage335 Volts RMS Max.65 Volts RMS Max.-80 dB to 3 GHz-65 dB to 26.5 GHzMechanicalAxial MisalignmentRadial MisalignmentDurabilityFull DetentSmooth BoreForce to EngageFull DetentSmooth BoreForce to DisengageFull DetentSmooth BorePermeability.010” (.25mm) Max. .010” (.25mm)100 Cycle1000 Cycles6 lbs (26.6N) Max.3 lbs (13.3N) Max.7 lbs (31.1N) Min.0.5 (2.2N) Min. 2.0MuEnvironmentalOperating TemperatureStorage TemperatureCorrosionVibrationRandom VibrationMechanical ShockThermal Shock-65 C to 165 C-65 C to 200 CMIL-STD-202, Method 101 Test Condition B, 5% Salt SolutionMIL-STD-202, Method 204 Test Condition B, 15 min/axisMIL-STD-202, Method 214 Test Condition F, 15 min/axisMIL-STD-202, Method 213 Test Condition I, 100g’s Sawtooth AxisMIL-STD-202, Method 107 Test Condition B, 165 C High Temp.* Individual connector may vary consult factory for specific specification888.265.9162 CRISTEK.COM
SMPMSMPMSMPM Connector Interfaces & MaterialsSMPM Full DetentMaterialsBeryllium Copper (BeCu)Stainless Steel 303PTFEBrassKovarGlassPer ASTM B 196 or ASTM B 197Per ASTM A 484, ASTM A 582, ASTM A 555or ASTM A 581Per ASTM D 1710Per ASTM B 36, ASTM B 121, ASTM B 16or ASTM B 16MPer ASTM F 15Corning 7070Standard FinishGoldNickelPassivateCRISTEK.COM 888.265.9162Per MIL-DLT-45204 , Type lll, Grade C Class 1Per SAE ASM 2404Per ASTM A967 or SAE AMS 2700
SMPM BULLETSSMPMSMPM BulletsSMPM INTERCONNECT (BULLET)Cristek Part NumberDIM AMB1-M161-S1.161MB1-M166-S1.166SMPMSMPM INTERCONNECT (BULLET)Cristek Part NumberDIM AMB1-M210-S1.210MB1-M349-S1.349MB1-M500-S1.500Page 36www.cristek.com888.265.9162 CRISTEK.COM714-696-5200
SMPMSMPM BULLETSSMPM BulletsSMPM INTERCONNECT (BULLET)MD-MFMF-L-001Dim AOPEN.530Dim BCLOSED.480MD-MFMF-L-002.650.600SMPMCristek Part NumberCRISTEK.COM 888.265.9162714-696-5200www.cristek.comPage 37
SMPM CABLE CONNECTORSSMPMSMPM Cable ConnectorsSMPM FEMALE, STRAIGHT, SEMI-RIGID CABLECable TypeCristek Part NumberDim ASR .047MA-MFCS-02-001.260SMPMSMPM FEMALE, RIGHT ANGLE, SEMI-RIGID CABLECable TypeCristek Part NumberDim ASR .047MA-MFCR-02-001.047Page 38www.cristek.com714-696-5200888.265.9162 CRISTEK.COM
SMPM CABLE CONNECTORSSMPMSMPM Cable ConnectorsSMPM FEMALE, RIGHT ANGLE, HIGH FREQUENCY, SEMI-RIGID CABLECristek Part NumberDim ASR .047MA-MFCW-02-001N-02-001.270SMPMCable TypeSMPM FEED THRU, FLANGE MOUNT, SEMI-RIGID CABLECable TypeCristek Part NumberDim ADim BSR 086SR -696-5200CRISTEK.COM 888.265.9162www.cristek.comPage 39
SMPM CABLED CONNECTORSSMPMSMPM Cabled ConnectorsSMPM SNAP IN SHROUD, PANEL MOUNT, SEMI-RIGID CABLECABLE TYPECristek MCJ-02-002.125SMPMSMPM SNAP IN SHROUD, FLOAT MOUNT, SEMI-RIGID CABLECable TypeSR.047Cristek PNMA-MMCM-02-001“A” PANELTHICKNESS.093Dim B.548SR.047MA-MMCM-02-002.125.580Page 40www.cristek.com714-696-5200888.265.9162 CRISTEK.COM
S M P M H E R M E T I C S O LU TSMPMIONSSMPM Hermetic SolutionsSMP FLANGE MOUNT SHROUDSMPMCristek Part NumberDetentDim ADim BDim CDim 0Ø.103SMPM HERMETIC FEED THRU, .012 DIAMETER PINCristek Part -002-120MCN1-MH-002-150.070.090.120.150CRISTEK.COM 888.265.9162714-696-5200www.cristek.comPage 41
SMPM HERMETIC SOLUTIONSSMPMSMPM Hermetic SolutionsSMPM PRESS IN SHROUDCristek Part SMPMSMPM THREAD IN SHROUDCristek Part NumberMA1MA-MMMT-001-FDMA-MMMT-001-SBMA1Page 2 CRISTEK.COM
SMPM HERMETIC SOLUTIONSSMPMSMPM Hermetic SolutionsSMPMSMPM HERMETIC FEED THRU, SHROUDED, Ø.130Cristek Part 0.070.090.090SMPM HERMETIC FEED THRU, SHROUDED, Ø.144Cristek Part MZH-002-SB-090714-696-5200CRISTEK.COM 070.090.090www.cristek.comPage 43
SMPM FEED THRU, “SPARK PLUG”, CONNECTORSSMPMSMPM Feed Thru, “Spark Plug”, ConnectorsSMPM PRESS IN “SPARK PLUG”Cristek Part PM THREAD IN “SPARK PLUG”Cristek Part NumberDetentMA-MMZT-001-FDMA-MMZT-001-SBFDSBPage 44www.cristek.com714-696-5200888.265.9162 CRISTEK.COM
SMPM PRINTED CIRCUIT BOARD CONNECTORSSMPMSMPM Printed Circuit Board ConnectorsSMPM MALE, RIGHT ANGLE, THRU HOLE, PCBDim MCristek PNSMPM MALE, VERTICAL, PCBCristek PNMA-MMDS-001-FDMA-MMDS-001-SBDim A.096.096714-696-5200CRISTEK.COM 888.265.9162DetentFDSBwww.cristek.comPage 45
SMPMSMPM PRINTED CIRCUIT BOARD CONNECTORSSMPM Printed Circuit Board ConnectorsSMPM MALE, VERTICAL, SURFACE MOUNT, PCBDetentDIM ADIM Cristek PNSMPM MALE, VERTICAL, SURFACE MOUNT, PCBCristek PNDetentMA-MMUN-001-FDFDMA-MMUN-001-SBSBPage 46www.cristek.com888.265.9162 CRISTEK.COM714-696-5200
SMPMSMPM PRINTED CIRCUIT BOARD CONNECTORSSMPM Printed Circuit Board ConnectorsSMPM MALE, VERTICAL, SURFACE MOUNT WITH THRU LEGS, PCBDim ADim tFDLDSMPMCristek PNSMPM MALE, VERTICAL, SURFACE MOUNT WITH THRU LEGS, PCB, LOW PROFILECristek M 888.265.9162714-696-5200www.cristek.comPage 47
SMPMSMPM Printed Circuit Board ConnectorsSMPM MALE, EDGE LAUNCH , 063Cristek PNDetentFDSBSMPMSMPM MALE, NOTCH EDGE LAUNCH PCBCristek PNDetentMA-MMZE-002-FDFDMA-MMZE-002-SBSBPage 48Page 48www.cristek.com714-696-5200888.265.9162 CRISTEK.COM
SMPM TERMINATIONSSMPMSMPM TerminationsSMPM FEMALE , 50 OHM FIELD GRADE TERMINATIONCristek PNFREQUENCYRANGEDC to 18 GHz18 to 50 GHzPOWERMAX.25 WattsSMPMMA-MFTS-002MA1VSWRMAX.1.15:11.30:1SMPM MALE, 50 OHM FIELD GRADE TERMINATIONCristek 00CRISTEK.COM 30:1DC TO 18 GHZ18 TO 50 GHZ.25WATTSwww.cristek.comPage 49
MA1 MA1 MA1 MA1. 888.265.9162 CRISTEK.COM SMPM SMPM Page 42 www.cristek.com 714-696-5200 Cristek Part Number Detent MA-MMMP-001-FD FD MA-MMMP-001-SB SB Cristek Part Number Detent MA-MMMT-001-FD FD MA-MMMT-001-SB SB SMPM THREAD IN SHROUD SMPM PRE
SMP 888.265.9162 CRISTEK.COM SMP SMP High Frequency Push-on The SMP connector is a multi-functi
loss, high performance RF connectors and PCB materials. Your One-Stop-Shop for RF PCB Design and Build. Solderless Edge Launch and Top Launch 2.92 mm Connectors on 40 GHz Megtron 7N Core SMPM Surface Mount Hermetic Connectors on Megtraon 7N with UltraSpeed Processing SMPM Surface Mount and Edge Mount Solder-On Connectors on Microstrip Trace
RF PCB Design and Build. Solderless Edge Launch and Top Launch 2.92 mm Connectors on 40 GHz Megtron 7N Core. SMPM Surface Mount Hermetic Connectors on Megtraon 7N with UltraSpeed Processing. SMPM Surface Mount and Edge Mount . Solder-On Connectors on Microstrip Trace Typical Model. Amphenol Model CUSTOMER.
SMP 888.265.9162 CRISTEK.COM SMP SMP High Frequency Push-on The SMP connector is a multi-functional, miniature, high frequency, push-on connector that can be adaptable for use in wide variety of high reliability
Multi- layer graphene nanoribbon is emerging as a potential candidate for deep-nanometer interconnects due to its superior conductivity and current carrying capabilities. MLGNR showed superior performance over SLGNR for global interconnects. Also multi-gate devices such as FinFETs are the most promising building blocks in sub-micron technology.
2 meter Valhalla 2 power cord, 15 Amp, configured for the United States. Interconnects: 2OD1MR 1 meter pair of Odin 2 Analog Interconnects with RCA connections at both ends. Speaker Cables: 2VH4MSB/SG 4 meter pair of V alhalla 2 Speaker Cables with 2 spades on the amp end and 2 bananas on the speaker end of each cable. NOTES
Novel advanced packaging architectures provide new opportunities to improve package electrical design for short reach interconnects These new technologies need to include features to enable also long reach interconnects Validated modeling methodologies & collaterals are key for both existing and emerging package and system designs
The most popular agile methodologies include: extreme programming (XP), Scrum, Crystal, Dynamic Sys-tems Development (DSDM), Lean Development, and Feature Driven Development (FDD). All Agile methods share a common vision and core values of the Agile Manifesto. Agile Methods: Some well-known agile software development methods include: Agile .
