Hydro Solo-E And Hydro Solo-E Optimum

Hydro Solo-E Optimum3Hydro Solo-E and Hydro Solo-E Optimum3. Hydro Solo-E OptimumFeatures and benefits of OptimumrangeEasy installationHydro Solo-E Optimum is fully pre-assembled, enabling aquick and easy installation. The system needs to beconnected, primed and then it is ready for operation.Compactness of the system reduces the space needed ininstallation.TM076324Low energy consumptionHydro Solo-E OptimumThe Grundfos E-motor with a built-in frequency converterenables variable speed operation and high efficiency,resulting in extensive energy savings.Motor protectionThe Grundfos Hydro Solo-E Optimum booster system is aturnkey solution enabling you to keep constant pressure inyour system at all times.Hydro Solo-E Optimum consists of the following:The Hydro Solo-E systems require no external motorprotection. The motor incorporates thermal protectionagainst slow overloading and blocking.Pre-programmed functions Pressure boosting - Home display. Constant pressure control.isolating valves for easy maintenance of the system Low-flow stop activated - setup according to tank size.analog pressure sensor for monitoring of inletconditions and prevention of dry running of the pump Stop at minimum speed activated (30 sec). Dry-running protection activated (0.5 bar - adjustable). inlet and outlet manifold in stainless steel Flow estimation. analog pressure sensor for monitoring and control ofdischarge pressure Anti-cavitation protection (flow limit). main switch Alarm/Pump running signal relays. non-return valve for prevention of backflow when thepump is stopped pressurised diaphragm tank to enable the stopping ofthe pump at low flow to increase system efficiency flowjet valve – special ball valve for pressure tankconnection to ensure water circulation inside the tank stainless-steel, factory-mounted baseplate withvibration dampers. inline vertical multistage centrifugal (CRIE) pump withIE5 motor and integrated VFD with graphical display Grundfos GO RemoteThe product is designed for Bluetooth communication withGrundfos GO Remote.Grundfos GO Remote enables you to set functions andgives you access to status overviews, technical productinformation and current operating parameters.Protection featuresDry-running protectionThe product incorporates dry-running protection thatautomatically stops the pump from running withoutliquid. Dry-running protection means less risk of pumpdamage and lower maintenance costs.Anti-cavitationThe pump comes pre-programmed with a flow limit toprotect against 93Non-returnvalvePumpSchematic of Hydro Solo-E Optimum11

3Hydro Solo-E and Hydro Solo-E OptimumHydro Solo-E OptimumControl panelHome displayHydro Solo-E Optimum12Home134Status Settings AssistSetpointControl modeConst. pressure5.00 bar2Operating modeNormal34.90 bar15TM0548494Pos. Symbol DescriptionGrundfos Eye:The indicator light shows the operating status of theproduct.123-Graphic colour display.4123Status Settings Assist98Pos. Symbol Description12-Back:Press the button to go one step back.3-Left/Right: Press the buttons to navigate between mainmenus, displays and digits. When you change the menu,the display shows the top display of the new menu.4-Up/Down:Press the buttons to navigate between submenus orchange the value settings.If you have disabled the possibility to make settings withthe Enable/disable settings function, you can enable itagain temporarily by pressing these buttonssimultaneously for at least 5 seconds.2TM0645166Actual controlled value567 6 5SetpointControl mode5.00 barConst. pressureHome: This menu shows up to four user-definedparameters. You can access each parameter directly fromthis menu. Operaring modeActual controlled value23Status: This 1menu shows the status of the productandNormalsystem, warnings and alarms.4.90 barSettings: This1 menu gives access to all setting23parameters. The menu also allows you toStatusmake detailedSettings Assistsettings.SetpointControl modeAssist: This 1menu enables assisted setup, 2provides3aStatusAssistfaultshort description of the control modes andoffers SettingsConst.pressure9 8 7 6 5finding advice.SetpointControl modeStart/Stop: The1 icon indicates that the product2 was 3StatusAssistConst.Settingspressurestopped with the Start/Stop button.Operaring modeActual controlled valueMaster: The iconindicates that the productis functioningSetpointControlmodeNormalas the master1 in a systemwith products of the2 same3typeStatusSettingsAssistConst.pressureand size.Operaring modeActualcontrolledvalue5.00 bar5.00 bar4.90 bar5.00 barOK:Press the button to do the following: Save changed values, reset alarms and expand thevalue field. Enable radio communication with Grundfos GORemote and other products of the same type.7Slave: The iconindicates that the productis functioningSetpointControlmodeNormalas a slave in a system with products of the same typeStatusSettingsAssistConst.pressureand size.Operaring modeActual The icon indicates that theproductisNormaloperating in a system with products9 of8 the7 same6 5 type andConst.pressuresize.Operaring modeActualcontrolledvalueWhen you try to establish radio communication betweenthe product and Grundfos GO Remote or anotherproduct, the green indicator light in Grundfos Eye flashes.In the controller display, a note states that a wirelessdevice wants to connect to the product. Press OK on theproduct operating panel to allow radio communicationwith Grundfos GO Remote and other products of thesame type.9Lock: The icon indicatesthat the possibility to makeNormal9 8 7 6 5settings has been disabled for protective reasons.Operaring modeActual controlled value5Start/Stop: Press the button to make the product readyfor operation or to start and stop the product.Start: If youpress the button when the product is stopped, the productstarts if no other functions with higher priority have beenenabled.Stop: If you press the button when the product isrunning, the product always stops.When you press thebutton, the stop icon appears at the bottom of the display.6Home: Press the button to go to the Home menu.4.90 bar5.00 bar4.90 bar5.00 bar4.90 barNormal4.90 bar987 6 5987 6 5987 6 5

3Hydro Solo-E and Hydro Solo-E Optimum120011001000H[m]Hydro Solo-E Optimum120CR R 15-3CR 5-7CR 10-3CR 5-51001000CR 15-2CR 10-3CR 3-70024168210123144161852022624267Q [m³/h]Q [l/s]TM070142p[kPa]Hydro Solo-E OptimumPerformance curvesHydro Solo-E Optimum performance range13

3Hydro Solo-E and Hydro Solo-E OptimumHydro Solo-E OptimumTechnical dataHDimensions and weightsDN2L2L1W2LTM071315H2H1DN1W1WDimensionsPump typeHH1H2WW1W2LL1L2CRIE 3-7611465112403244159912568344CRIE 5-5620465112403244159912568344CRIE 5-7710465112403244159912568344CRIE 5-9804465112403244159912568344CRIE 10-3739465142479259220969599370CRIE 15-28164651524672592081188681507CRIE 15-38614651524672592081188681507WeightsPump typeNet Weight [kg]Gross Weight [kg]CRIE 3-74150CRIE 5-54452CRIE 5-74857CRIE 5-94857CRIE 10-37084CRIE 15-279103CRIE 15-379103Electrical dataPump Type14Motor [kW]Full-Load Current [A]Supply Voltage [V]Tank Volume [l]Connection In/OutletCRIE 3-70.754.70-3.901 x 200-240 V18Rp 1" 1/4CRIE 5-51.16.70-5.601 x 200-240 V18Rp 1" 1/4CRIE 5-71.59.10-7.601 x 200-240 V18Rp 1" 1/4CRIE 5-92.24.15-3.403 x 380-500 V18Rp 1" 1/4CRIE 10-31.59.10-7.601 x 200-240 V18Rp 1" 1/2CRIE 10-32.24.15-3.403 x 380-500 V18Rp 1" 1/2CRIE 15-23.06.20-5.003 x 380-500 V18Rp 2"CRIE 15-34.07.60-6.503 x 380-500 V18Rp 2"

3Hydro Solo-E and Hydro Solo-E OptimumAmbient temperature0-60 CCRE 0.37 - 11 kW0-50 CMinimum inlet pressureThe minimum inlet pressure H in metres head required toavoid cavitation in the pump is calculated as follows:H Pb x 10.2 - NPSH - Hf - Hv - HsPb Barometric pressure in bar.Barometric pressure can be set to1, if required.NPSH Net Positive Suction Head inmetres head. NPSH can be readfrom the NPSH curve at themaximum capacity at which thepump will run.Hf Friction loss in inlet pipe in metreshead.Hv Vapour pressure in metres head.Hs Safety margin of minimum 0.5metres head.18913Maximum inlet and system pressuresHydro Solo-EOptimumMaximum inletpressure [bar]10CRIE 3-761012CRIE 5-561011CRIE 5-9616CRIE 10-3610610CRIE 15-361027System pressure[bar]CRIE 15-2Hydro Solo-E OptimumLiquid temperatureConstruction of Hydro Solo-E OptimumSystem componentsThe inlet side is fitted with a stainless steel inlet pipe(EN/DIN 1.4401 or EN/DIN 1.4571) and a non-returnvalve. The inlet pipe is fitted with a isolating valve and ainlet pressure sensor.The outlet side of the pump is fitted with a isolation valve,flow jet valve and pressure tank.The pump is fitted with and off/on switch for supplyvoltage, a discharge pressure sensor and a graphicaldisplay.3654Pos.DescriptionQuantity1CRIE pump withgraphical display12Pressure tank13Flow jet valve forpressure tank14Isolating valve15Outlet pipe, stainlesssteel16Base plate withvibration dampers17Discharge pressuresensor18Inlet pressure sensor19Isolating valve110Inlet pipe, stainlesssteel111On/Off switch112Non-return valve113Nameplate1TM076356Operating temperature15

4Hydro Solo-E and Hydro Solo-E OptimumHydro Solo-E4. Hydro Solo-ETM076249Features and benefitsHydro Solo-EThe Grundfos Hydro Solo-E booster system is a turnkeysolution enabling you to keep a constant pressure in yoursystem at all times. Hydro Solo-E consists of a GrundfosCRE pump fitted with isolating valve, non-return valve,outlet pipe, pressure transmitter, pressure gauge andpressure tank. Hydro Solo-E is ready for operation ondelivery. Easy installation. Constant pressure. Speed-controlled pump. Low energy consumption. No need for motor protection. Compact design.Easy installationHydro Solo-E Optimum is fully pre-assembled, enabling aquick and easy installation. The system needs to beconnected, primed and then it is ready for operation.Compactness of the system reduces the space needed ininstallation.Motor protectionThe Hydro Solo-E systems require no external motorprotection. The motor incorporates thermal protectionagainst slow overloading and blocking.Grundfos GO RemoteThe product is designed for Bluetooth communication withGrundfos GO Remote.Grundfos GO Remote enables you to set functions andgives you access to status overviews, technical productinformation and current operating parameters.Protection featuresDry-running protectionThe product incorporates dry-running protection thatautomatically stops the pump from running withoutliquid. Dry-running protection means less risk of pumpdamage and lower maintenance costs.Anti-cavitationPressuretransmitterSchematic of Hydro Solo-E16The pump comes pre-programmed with a flow limit toprotect against mp

Control panelTechnical dataHydro Solo-EOperating temperatureLiquid temperatureAmbient temperature1Hydro Solo-E4Hydro Solo-E and Hydro Solo-E Optimum0-60 CCRE 0.37 - 11 kW0-50 CMinimum inlet pressure2The minimum inlet pressure H in metres head required toavoid cavitation in the pump is calculated as follows:34Pos. Symbol DescriptionPb Barometric pressure in bar.Barometric pressure can be set to1, if required.NPSH Net Positive Suction Head inmetres head. NPSH can be readfrom the NPSH curve at themaximum capacity at which thepump will run.Hf Friction loss in inlet pipe in metreshead.Hv Vapour pressure in metres head.Hs Safety margin of minimum 0.5metres head.Grundfos Eye: The indicator light shows the operatingstatus of the product.12 Pb x 10.2 - NPSH - Hf - Hv - Hs5TM054848StopH-Light fields for setpoint indication.3Up/Down: The buttons change the setpoint.4Radio communication: The button enables radiocommunication with Grundfos GO Remote and otherproducts of the same type.5Start/Stop: Press the button to make the product readyfor operation or to start and stop the product.Start: If youpress the button when the product is stopped, the productstarts if no other functions with higher priority have beenenabled.Stop: If you press the button when the product isrunning, the product always stops. When you press thebutton, the stop icon appears at the bottom of the display.17

4Hydro Solo-E and Hydro Solo-E OptimumHydro Solo-EMaximum inlet and system pressuresConstruction of Hydro Solo-EInternational rangeSystem ComponentsThe outlet side of the pump is fitted with a non-returnvalve, a stainless-steel outlet pipe (EN/DIN 1.4401 orEN/DIN 1.4571), and an isolating valve. The outlet pipe isfitted with a pressure transmitter and an isolating valve forthe pressure gauge and the pressure tank. The pump isfitted with an on/off switch for the supply voltage.Maximum inletpressure [bar]System pressure[bar]CRE 1-4, 1-9CRE 1-13, 1-1710101016CRE 3-4, 3-8, 3-11CRE 3-11, 3-1510101016CRE 5-2, 5-5, 5-9CRE 5-121010Pump type1016CRE 10-1, 10-3CRE 10-58101010CRE 15-2CRE 15-3, 15-48101010CRE 20-2, 20-31010CRE 32-2-2410CRE 45-14101102Southern European rangeMaximum inletpressure [bar]System pressure[bar]CRE 1-4, 1-6, 1-9,1-13, 1-171016CRE 3-4, 3-5, 3-8,3-11, 1-151016CRE 5-2, 5-4, 5-5, 5-9CRE 5-1210101516CRE 10-1, 10-2, 10-3,10-5CRE 10-68101510CRE 15-2CRE 15-3, 15-48101010CRE 20-2, 20-31010CRE 32-2-2410CRE 45-141018934587TM027562Pump type6Hydro Solo-EPos.DescriptionQuantity1CRE pump12Pressure tank13Pressure gauge14Isolating valve forpressure tank andpressure gauge15Isolating valve16Outlet pipe, stainlesssteel17Pressure transmitter18Non-return valve19On/off switch110Nameplate1

Data sheetsElectrical dataHydro Solo-E with CRE1International rangeMotor [kW]Full-loadcurrent [A]CRE 1-40.372.40 - 2.101 x 200-240 VCRE 1-60.553.45 - 2.901 x 200-240 VCRE 1-90.754.70 - 3.901 x 200-240 VCRE 1-131.106.70 - 5.601 x 200-240 VCRE 1-171.509.10 - 7.601 x 200-240 VMotor [kW]Full-loadcurrent [A]Supply Voltage[V]CRE 1-60.553.45 - 2.901 x 200-240 VCRE 1-90.754.70 - 3.901 x 200-240 VCRE 1-131.106.70 - 5.601 x 200-240 VPump type14001200H[m]150Hydro Solo-E140CRE 1130ISO 9906:2012 Grade 3B120CRE 1-131101000Southern European range1009080080Pump typeCRE 1-9704002006050540430320100NPSH[m]CRE 1-6Dimensions and 5 Q [m³/h]Q [l/s]H600Supply Voltage[V]H1p[kPa]Hydro Solo-E4Hydro Solo-E and Hydro Solo-E 2L1LW0.20.00.51.01.5TM0590200.02.02.5 Q [m³/h]Netweight[kg]Grossweight[kg]H [mm]International rangePumptypeTankConnectionVolume [l] Inlet/OutletH1 [mm] H2 [mm]W [mm] W1 [mm] W2 [mm]L [mm]L1 [mm]L2 [mm]CRE 1-418Rp 1" 1/4384148646550384244140749591102CRE 1-618Rp 1" 1/4485152246550384244140749591102CRE 1-918Rp 1" 1/4505358246550384244140749591102CRE 1-1312Rp 1" 1/4455465446650384244115749591102CRE 1-1712Rp 1" sweight[kg]H [mm]L [mm]L1 [mm]L2 [mm]Southern European rangePumptypeTankConnectionVolume [l] Inlet/OutletH1 [mm] H2 [mm]W [mm] W1 [mm] W2 [mm]CRE 1-618Rp 1" 1/4577752264950377237140713555102CRE 1-918Rp 1" 1/4597958264950377237140713555102CRE 1-1312Rp 1" 1/462826546495037723714071355510219

4Hydro Solo-E and Hydro Solo-E OptimumHydro Solo-EHydro Solo-E with CRE3Electrical dataInternational 301201101009080706050403020100Pump typeCRE 3-15Motor [kW]Full-loadcurrent [A]Supply Voltage[V]Hydro Solo-ECRE 3-40.553.45 - 2.901 x 200-240 VCRE 3CRE 3-50.754.70 - 3.901 x 200-240 VCRE 3-81.106.70 - 5.601 x 200-240 VCRE 3-111.509.10 - 7.601 x 200-240 VCRE 3-152.204.15 - 3.43 x 380-500 VMotor [kW]Full-loadcurrent [A]Supply Voltage[V]CRE 3-81.106.70 - 5.601 x 200-240 VCRE 3-111.509.10 - 7.601 x 200-240 VCRE 3-152.204.15 - 3.403 x 380-500 VISO 9906:2012 Grade 3BCRE 3-11Southern European rangeCRE 3-8Pump typeNPSH[m]543210NPSHDimensions and weights0.0 0.8 1.6 2.4 3.2 4.0 4.8 Q [m³/h]0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Q L20.0TM0590210.0 0.8 1.6 2.4 3.2 4.0 4.8 Q [m³/h]W1W2L1LWInternational rangePumptypeTankConnectionVolume [l] Inlet/OutletNetweight[kg]Grossweight[kg]H [mm]H1 [mm] H2 [mm]CRE 3-418Rp 1" 1/43841486465420CRE 3-518Rp 1" 1/44144510465CRE 3-818Rp 1" 1/44351606465CRE 3-1112Rp 1" 1/44874654CRE 3-1512Rp 1" 1/45864813Netweight[kg]Grossweight[kg]H [mm]W [mm] W1 [mm] W2 [mm]L [mm]L1 [mm]L2 5749591102L [mm]L1 [mm]L2 [mm]Southern European rangePumptype20TankConnectionVolume [l] Inlet/OutletH1 [mm] H2 [mm]W [mm] W1 [mm] W2 [mm]CRE 3-825Rp 1" 1/4597956464950377237140713555102CRE 3-1125Rp 1" 1/4658565464950377237140713555102CRE 3-1525Rp 1" 1/4698972664950377237140713555102

4Hydro Solo-E and Hydro Solo-E OptimumHydro Solo-E with CRE5Hydro Solo-EElectrical dataInternational 301201101009080706050403020100Pump typeCRE 5-14Supply Voltage[V]CRE 5-20.553.45 - 2.901 x 200-240 VCRE 5CRE 5-51.509.10 - 7.601 x 200-240 VCRE 5-92.204.15 - 3.403 x 380-500 VCRE 5-123.006.20 - 5.003 x 380-500 VCRE 5-143.005.80 - 4.803 x 380-480 VMotor [kW]Full-loadcurrent [A]Supply Voltage[V]CRE 5-51.509.10 - 7.601 x 200-240 VCRE 5-92.204.15 - 3.403 x 380-415 VCRE 5-123.006.20 - 5.003 x 380-415 VCRE 5-143.005.80 - 4.803 x 380-480 VISO 9906:2012 Grade 3BCRE 5-9Southern European rangePump typeCRE 5-5NPSH[m]6420NPSHDimensions and weights0 1 2 3 4 5 6 7 8 9 Q [m³/h]0.5Full-loadcurrent [A]Hydro Solo-ECRE 5-120.0P2[kW]Motor [kW]1.01.52.02.5Q .50.0L2TM0590220 1 2 3 4 5 6 7 8 9 Q [m³/h]W1W2L1LWInternational rangePumptypeTankConnectionVolume [l] Inlet/OutletNetweight[kg]Grossweight[kg]H [mm]47468465420420244H1 [mm] H2 [mm]W [mm] W1 [mm] W2 [mm]L [mm]L1 [mm]L2 [mm]140749591102CRE 5-218Rp 1" 1/444CRE 5-518Rp 1" 1/4535559146550384244140749591102CRE 5-918Rp 1" 1/49910173846550384244140749591104CRE 5-1212Rp 1" 1/4737688464950377237140756555102CRE 5-1412Rp 1" sweight[kg]H [mm]L [mm]L1 [mm]L2 [mm]Southern European rangePumptypeTankConnectionVolume [l] Inlet/OutletH1 [mm] H2 [mm]W [mm] W1 [mm] W2 [mm]CRE 5-525Rp 1" 1/4648459164950377237140713555102CRE 5-925Rp 1" 1/4678773964950377237140713555102CRE 5-1225Rp 1" 1/48510588464950377237140756555102CRE 5-1425Rp 1" 1/456749384665038424411579259110221

4Hydro Solo-E and Hydro Solo-E OptimumHydro Solo-EHydro Solo-E with CRE10Electrical dataInternational rangePump typeH[m]110100600200804.70 - 3.901 x 200-240 V2.204.15 - 3.403 x 380-500 VCRE 10-53.006.20 - 5.003 x 380-500 VCRE 10-64.007.60 - 6.203 x 380-500 VMotor [kW]Full-loadcurrent [A]Supply Voltage[V]CRE 10-32.204.15 - 3.403 x 380-480 VCRE 10-53.006.20 - 5.003 x 380-480 VCRE 10-64.008.10 - 6.603 x 380-480 VCRE 10-570Southern European range60Pump typeCRE 10-3NPSH[m]403062041000.75CRE 10-3ISO 9906:2012 Grade 3B50400CRE 10-1CRE 10Dimensions and

Left to right: Hydro Solo-E, Hydro Solo-E Optimum Hydro Solo-E Optimum The Hydro Solo-E Optimum is a fully-optimised package with constant pressure control, flow estimation and plug-and-pump installation for immediate, always-optimised operation. The graphical display built into the pump provides a real-time overview of booster set performance.