Power Transfer Switches Technical Data And Ordering .
ASCO 7000 SERIESPower Transfer SwitchesTechnical Data and OrderingInformationascopower.com
ASCO 7000 SERIES ORDERING INFORMATIONTo order an ASCO 7000 SERIES Power Transfer Switch, complete the following catalog number:J07ATSA30600N5XCFrameTransition TypeNeutral 20030A 11530070B 1200100C 2080150D 22002001E 23002301F 240D1 30A-230AATS/NTS/MTSOnlyJ 150A-600AH 800A-1200AG 1600A-4000AAutomatic07ATS Automatic,Conventional 2 - position7ACTS Automatic,Closed Transition7ADTS Automatic,Delayed Transition07ATB Automatic,Open Transition Bypass0 NoNeutralA SolidNeutralB2 SwitchedNeutralC OverlappingNeutral7ACTB Automatic,Closed Transition Bypass7ADTB Automatic,Delayed Transition BypassNon-Automatic07NTS Non Automatic,Conventional 2 - position07MTS Non Automatic,Conventional 2 - position7NCTS Non Automatic,Closed Transition7NDTS Non AutomaticDelayed Transition7NTB Non Automatic,Open Transition Bypass0260H 3800400J 4000600K 4150800L 4401000M 4601200N 4801600P 5502000Q 5752600R 60050No OptionalAccessories0 Open Type (zero)5XOptionalAccessoriesF Type 3R3 Enclosure5ZVATSH Type 4X4 EnclosureC Type 1 EnclosureG Type 4 EnclosureL Type 12 Enclosure5DVATS withDistributionBreakersM Type 3R3 SecureDouble Door5 EnclosureN Type 4 SecureDouble Door5 EnclosureP Type 4X4 SecureDouble Door5 EnclosureQ Type 12 EnclosureDouble Door5 EnclosureR Type 3RX4 SecureDouble Door5 EnclosureS Type 3RX SecureDouble Door5 Enclosure(316 Stainless Steel)300040007NCTB Non Automatic,Closed Transition BypassU Type 4X Enclosure(316 Stainless Steel)V Type 4X SecureDouble Door5 Enclosure(316 Stainless Steel)7NDTB Non Automatic,Delayed Transition BypassNotes:1. 200 and 230 amp switch limited to 480 volts maximum, for D7ATS only.2. Conventional switched neutral is provided on closed and delayed transition transfer products when specified.3. Type 3R enclosures are not suitable for installations likely to experience windblown snow or rain conditions.4. Type 304 stainless steel is standard. To provide an improved reduction in corrosion in salt or marine environments, specify optional type 316 stainless steel.5. Double door enclosures are door over internal dead front panels/doors. All controls are mounted on internal panel/door. External door is pad-lockable forsecure applications.A comprehensive ASCO Limited Guardian Warranty covers 7000 SERIES Power Transfer Switch(s) and warranties the product to be free of defects in materialand workmanship from date of shipment. The warranty provides: 2 years for labor and travel expenses (extendable in 1 year increments up to 5 years for a nominal fee). 5 years for parts (2 years for circuit breakers). 10 years for main contacts.Refer to Publication 3227 for warranty details, terms and conditions.The Example Catalog Number above is J07ATSA30600N5XC2
ASCO 7000 SERIES ORDERING INFORMATION — POWER CONNECTION DETAILSTransfer Switch Configurations 7ATS, 7NTS, 7ADTS, 7ACTS, 7NDTS, 7NCTSSizes of UL-Listed Solderless Screw-Type Terminals for External Power ConnectionsSwitch Rating AmpsMax # of Conductors per TerminalD Frame 30-230A ATS & NTS Only1J Frame 150 - 400AJ Frame 600ARange of AL-CU Conductor SizesOpen TypeEnclosed TypeOne#14 to 4/0 AWG#14 to 4/0 AWGOne#4 AWG to 600 MCM#4 AWG to 600 MCMTwo#1/0 AWG to 600 MCM#1/0 AWG to 600 MCMTwo#1/0 AWG to 600 MCM#1/0 AWG to 600 MCMH Frame 600ATwo#1/0 AWG to 600 MCM#1/0 AWG to 600 MCMH Frame 800 - 1200AFour#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMG Frame 1000 - 1200AFour#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMG Frame 1600 - 2000ASix#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMG Frame 2600 - 4000A2Twelve#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMNotes:1. 200 and 230 amp rating for copper conductors only for transfer switch configurations only.2. All main terminals are rear connected.Transfer Switch Configurations 7ATB, 7NTB, 7ADTB, 7ACTB, 7NDTB, 7NCTBSizes of UL-Listed Solderless Screw-Type Terminals for Power ConnectionsSwitch Rating AmpsMax # of Conductors per TerminalJ Frame 150 - 400ARange of AL-CU Conductor SizesOpen TypeEnclosed TypeOne#4 AWG to 600 MCM#4 AWG to 600 MCMTwo#1/0 AWG to 600 MCM#1/0 AWG to 600 MCMJ Frame 600ATwo#2 AWG to 600 MCM#2 AWG to 600 MCMH Frame (Front & Rear Connected) 600ATwo#2 AWG to 600 MCM#2 AWG to 600 MCMH Frame (Front Connected) 800 - 960AThree#1/0 AWG to 600 MCM#1/0 AWG to 600 MCMH Frame (Rear Connected) 800 – 1200AFour#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMG Frame 1000 - 1200A1Four#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMG Frame 1600 – 2000ASix#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMG Frame 2600 – 3000ATen#1/0 AWG to 750 MCM#1/0 AWG to 600 MCMG Frame 4000A1Twelve#1/0 AWG to 750 MCM#1/0 AWG to 600 MCM11Notes:1. All main terminals are rear connected3
ASCO 7000 SERIES DESIGNED TO FIT ANYWHEREAutomatic Transfer Switching – Open Transition: 7ATS, 7NTS, 7MTS (Non-Bypass)Dimensions and Shipping Weights*FrameSwitchRatingsAmpNeutralType &PolesWidth In(mm)Type 1 Enclosure1Height In Depth In(mm)(mm)02 or A2DD30, 70, 100150, 200, 23003 or A318 (457)48 (1219)13 (330)GGG12001000, 16003, 200031600, 2000(Front Connected)426003, 3000303 or A318 (457)48 (1219)13 (330)03 or A303 or A3400010 (260)10 (260)5.5 (140)45 (21)270 (123)24 (610)56 (1422)14 (356)280 (128)220 (100)19 (470)25 (635)8 (203)290 (132)63 (1600)17 (432)280 (128)260 (119)19 (470)30 (762)10 (251)290 (132)72 (1829)20 (508)480 (219)270 (123)280 (128)470 (214)34 (864)230 (105)240 (109)270 (123)24 (610)40 (18)260 (119)27 (686)31 (787)13 (327)270 (123)B3 or C3490 (223)280 (128)02 or A2670 (308)300 (137)03 or A338 (965)87 (2210)23 (584)680 (310)B3 or C3690 (315)02 or A21330 (606)03 or A338 (965)91 (2311)48 (1219)1350 (616)27 (686)31 (787)13 (327)310 (141)320 (146)450 (205)33 (845)28 (711)26 (667)470 (214)B3 or C31400 (638)500 (228)02 or A21300 (590)450 (205)03 or A338 (965)87 (2210)23(584)1345 (612)33 (845)28 (711)26 (667)470 (214)B3 or C31390 (635)500 (228)02 or A22150 (980)890 (406)03 or A302 or A2G120 (55)130 (59)38 (965)91 (2311)60 (1524)B3 or C3335 (16)35 (16)02 or A2H5.5 (140)40 (18)03 or A3600, 800, 100010 (260)115 (52)B3 or C3H10 (260)02 or A202 or A260080 (36)30 (14)85 (39)B3 or C3JOpen Switch ConfigurationHeight In Depth InOpen2(mm)(mm)lb (kg)B3 or C302 or A2150, 260, 400Width In(mm)70 (32)B3 or C3JWeightlb (kg)03 or A3B3 or C360(1524)92 (2311)72 (1829)2180 (994)33 (845)29 (711)31 (781)920 (420)2230 (1017)1000 (456)2250 (1026)990 (451)2280 (1040)60 (1524)70 (1778)53 (1272)2330 (1062)1020 (465)1100 (502)Notes:1. Consult ASCO for dimensions on enclosures other than UL type 1.2. Open weights include transfer switch and controller. 1200-4000 amp enclosures require ventilation openings, refer to drawing for details.3. Enclosures are free-standing with removable top, sides, and back.4. Order accessory 40MY for 1600A and 40NY for 2000A Front Connected (F/C) design.*All dimensions and weights shown are approximate and should not be used for construction purposes. Verified dimensions can be furnished upon request.4
ASCO 7000 SERIES DESIGNED TO FIT ANYWHEREAutomatic Transfer Switching – Closed and Delayed Transition: 7ACTS, 7ADTS, 7NCTS, 7NDTSDimensions and Shipping Weights*FrameSwitchRatingsAmpNeutralType &PolesJ150, 200, 230,260, 40003J600H600, 800, 1000H1200GG1000, 16003, 20003B303B303B303B303B31600, 200003(Front Connected)4B3G26003, 30003G4000303B303B3Width In(mm)Type 1 Enclosure1Height In Depth In(mm)(mm)24 (610)56 (1422)14 (356)24 (610)63 (1600)17 (432)34 (864)72 (1829)20 (508)38 (965)87 (2210)23 (584)38 (965)91 (2311)48 (1219)Weightlb (kg)Width In(mm)320 (146)18.5(470)25 (635)8 (203)19 (483)30 (762)10 (251)27 (686)31 (787)13 (327)27 (686)31 (787)13 (327)33 (845)28 (711)26 (667)330 (150)380 (173)390 (178)480 (219)490 (223)680 (310)690 (315)1350 (616)1400 (638)23.51345 (612)(597)1390 (635)38 (965)87 (2210)38 (965)91 (2311)60 (1524)60(1524)92 (2311)72 (1829)Open Switch Configuration2Height In Depth InWeight(mm)(mm)lb (kg)2180 (994)2230 (1017)2290 (1044)2380 (1085)33 (845)28 (711)26 (667)33 (845)29 (711)31 (781)60 (1524)70 (1778)53 (1272)220 (100)230 (105)260 (119)270 (123)360 (164)370 (169)360 (164)380 (173)580 (264)600 (274)580 (264))600 (274)1060 (483)1100 (502)1060 (483)1140 (520)Notes:1. Consult ASCO for dimensions on enclosures other than UL type 1.2. Open weights include transfer switch and control panel. 1200-4000 amp enclosures require ventilation openings, refer to drawings for details.3. Enclosures are free-standing with removable top, sides, and back.4. Order accessory 40MY for 1600A and 40NY for 2000A front connected design.*All dimensions and weights shown are approximate and should not be used for construction purposes. Verified dimensions can be furnished upon request5
ASCO 7000 SERIES DESIGNED TO FIT ANYWHEREAutomatic Transfer Bypass-Isolation – Open Transition: 7ATB, 7NTBDimensions and Shipping Weights*FrameJJHHHHGGGSwitchRatingsAmpNeutralType &Poles150, 200, 230,02 or A2Width In(mm)Type 1 Enclosure1Height In Depth In(mm)(mm)Weightlb (kg)Open Switch Configuration2Width In Height In Depth InWeight(mm)(mm)(mm)lb (kg)1230 (561)260, 40003 or A3(Front Connected)B3 or C31260 (575)1130 (515)60002 or A21290 (588)1190 (543)(Front Connected)03 or A334 (864)34 (864)85 (2159)85 (2159)28 (711)28 (711)1240 (565)1100 (502)1300 (593)34 (864)34 (864)85 (2159)85 (2159)28 (711)28 (711)1110 (506)1200 (547)B3 or C31320 (602)1220 (556)600, 80003 or A31400 (638)1260 (575)(Front Connected)3B3 or C31000, 1200 (Front03 or A3Connected)3B3 or C3600, 800, 1000 (Rear03 or A3Connected)B3 or C3120003 or A3(Rear Connected)B3 or C31000, 1600, 200003 or A34(Front Connected)B3 or C32600, 3000 (Rear03 or A3Connected)4B3 or C34400003 or A3(Rear Connected)4B3 or C338 (965)91 (2311)32 (813)38 (965)91 (2311)34 (864)38 (965)91 (2311)48 (1219)38 (965)38 (965)91 (2311)91 (2311)48 (1219)60 (1524)38 (965)91 (2311)72 (1829)60 (1524)92 (2311)96 (2438)1420 (648)1430 (650)1450 (659)1720 (784)1740 (793)1820 (830)1840 (839)2360 (1076)2540 (1158)2730 (1245)3360 (1532)6300 (2873)6900 (3146)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)60 (1524)91 (2311)96 (2438)1280 (584)1290 (588)1310 (597)1260 (575)1280 (584)1290 (588)1310 (597)1500 (684)1680 (766)1690 (771)2290 (1044)Contact ASCOContact ASCONotes:1. Handles extend 6-1/4 inches (159mm).2. Open weights include transfer switch, bypass-isolation switch and controller. 1600-4000 amp enclosures require ventilation openings, refer to drawings for details.3. Specify optional accessory 40J Y for 800 Amp front, 40KY for 1000 Amp, and 40LY for 1200 Amp - front connected arrangement. All service and load cables limitedto top entry only.4. Recommended clearance to enclosure: 3 feet (914mm) from rear, 4 feet (1219mm) from front (25 inches required for transfer switch draw out). Side orrear access required.*All dimensions and weights shown are approximate and should not be used for construction purposes. Verified dimensions can be furnished upon request.6
ASCO 7000 SERIES DESIGNED TO FIT ANYWHEREAutomatic Transfer Bypass-Isolation: Closed and Delayed Transition: 7ACTB, 7ADTB, 7NCTB, 7NDTBDimensions and Shipping Weights*FrameJJHHSwitchRatingsAmpNeutralType &Poles150, 200,02 or A2HGGGWeightlb (kg)Width In(mm)Open Switch Configuration2Height In Depth InWeight(mm)(mm)lb (kg)1255 (572)230, 260, 40003 or A3B3 or C31285 (586)1155 (527)60002 or A21315 (600)1215 (554)(Front Connected)03 or A334 (864)34 (864)85 (2159)85 (2159)28 (711)28 (711)1265 (577)1125 (513)(Front Connected)1325 (604)34 (864)34 (864)85 (2159)85 (2159)28 (711)28 (711)1135 (518)1225 (559)B3 or C31345 (613)1245 (568)6003, 800303 or A31425 (650)1285 (586))(Front Connected)B3 or C310003, 1200303 or A3(Front Connected)B3 or C3403 or A3(Rear Connected)B3 or C3120003 or A3600 , 800 , 10004HWidth In(mm)Type 1 Enclosure1Height In Depth In(mm)(mm)44(Rear Connected)B3 or C31000, 16004, 2000403 or A3(Rear Connected)B3 or C326004, 3000403 orA3(Rear Connected)B3 or C340004(Rear Connected)03 orA3B3 or C338 (965)91 (2311)32 (813)38 (965)91 (2311)34 (864)38 (965)91 (2311)48 (1219)38 (965)38 (965)91 (2311)91 (2311)48 (1219)60 (1524)38 (965)91 (2311)72 (1829)60 (1524)91 (2311)96 (2438)1445 (659)1425 (650)1445 (659)1745 (796)1765 (805)1845 (841)1865 (850)2385 (1088)2565 (1170)2755 (1256)3385 (1544)6325 (2884)6925 (3158)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)38 (965)72 (1829)38 (965)60 (1524)91 (2311)96 (2438)1280 (595)1315 (600)1335 (609)1285 (586)1280 (595)1315 (600)1335 (609)1525 (695)1705 (777)1715 (782)2315 (1056)Contact ASCOContact ASCONotes:1. Handles extend 6-1/4 inches (159mm).2. Open weights include transfer switch, bypass-isolation switch and controller. 1600-4000 amp enclosures require ventilation openings, refer to drawings for details.3. Specify optional accessory 40J Y for 800 Amp front, 40KY for 1000 Amp, and 40LY for 1200 Amp - connected arrangement. All service and load cables limited totop entry only.4. Recommended clearance to enclosure: 3 feet (914mm) from rear, 4 feet (1219mm) from front (25 inches required for transfer switch draw out). Side orrear access required.*All dimensions and weights shown are approximate and should not be used for construction purposes. Verified dimensions can be furnished upon request.7
ASCO 7000 SERIES 30 CYCLE ORDERING INFORMATIONTo order an ASCO 7000 SERIES Power Transfer Switch, complete the following catalog number:P07ATSA30600N5XCFrameTransition TypeNeutral 30600A 1150800B 1201000C 2081200D 2201600E 2302000F 2402600H 3803000J 4004000K 415P 600A - 800AATS/CTS/DTSAutomatic07ATS Automatic ,Conventional 2 - positionP 600A - 1200AATB/ACTB/ADTB7ACTS Automatic, ClosedTransitionQ 600A - 1600A7ADTS Automatic,Delayed TransitionS 800A - 2000A07ATB Automatic, OpenTransition BypassG 1600A - 4000A7ACTB Automatic, ClosedTransition BypassU 2600A - 4000A7ADTB Automatic,Delayed Transition Bypass0 NoNeutralA SolidNeutralB1 SwitchedNeutralNon-Automatic07NTS Non Automatic,Conventional 2 - position7NCTS Non Automatic,Closed Transition7NDTS Non Automatic,Delayed Transition7NTB Non Automatic,Open Transition Bypass50No OptionalAccessories0 Open Type (zero)5XOptionalAccessoriesM Type 3R2 SecureDouble Door4Enclosure5ZVATS5DVATS withDistributionBreakersL 440M 460N 480P 550Q 575R 6007NCTB Non Automatic,Closed Transition BypassC Type 1 EnclosureN Type 4 SecureDouble Door4EnclosureP Type 4X3 SecureDouble Door4EnclosureQ Type 12 EnclosureDouble Door4EnclosureR Type 3RX2,3SecureDouble Door4 EnclosureS Type 3RX2 SecureDouble Door4Enclosure(316 Stainless Steel)V Type 4X SecureDouble Door4Enclosure(316 Stainless Steel)7NDTB Non Automatic,Delayed Transition BypassNotes:1. Conventional switched neutral is provided on closed and delayed transition transfer products when specified.2. Type 3R enclosures are not suitable for installations likely to experience windblown snow or rain conditions.3. Type 304 stainless steel is standard. To provide an improved reduction in corrosion in salt or marine environments, specify optional type 316 stainless steel.4. Double door enclosures are door over internal dead front panels/doors. All controls are mounted on internal panel/door. External door is pad-lockable forsecure applications.A comprehensive ASCO Limited Guardian Warranty covers 7000 SERIES Power Transfer Switch(s) and warranties the product to be free of defects in materialand workmanship from date of shipment. The warranty provides: 2 years for labor and travel expenses (extendable in 1 year increments up to 5 years for a nominal fee). 5 years for parts (2 years for circuit breakers). 10 years for main contacts.Refer to Publication 3227 for warranty details, terms and conditions.The Example Catalog Number above is P07ATSA30600N5XC8
ASCO 7000 SERIES DESIGNED TO FIT ANYWHERE30 Cycle Automatic Transfer Switch (Non-Bypass) & Bypass - Isolation Switch7ATS, 7NTS, 7ACTS, 7ADTS, 7NTCS, 7NDTS, 7ATB, 7NTB, 7ACTB, 7ADTB, 7NCTB, 7NTBDimensions and Shipping Weights*FramePQS3Switch Ratings AmpSwitch Configuration600 - 800A(Front Connected ATS)ACTS, ADTS, NCTS, NDTSATS/NTSATB/NTB600 - 800A(Front Connected BPS)ACTB, ADTB, NCTB, NDTB600 - 1600A(Front Connected ATS)ACTS, ADTS, NCTS, NDTSATS/NTSATB/NTB600 - 1600A(Rear Connected BPS)ACTB, ADTB, NCTB, NDTBATS/NTS800 - 2000A(Rear Connected ATS)ACTS, ADTS, NCTS, NDTSATB/NTB800 - 2000A(Rear Connected BPS)ACTB, ADTB, NCTB, NDTBATS/NTS1600 - 2000A(Front & Rear Connected ATS)ACTS, ADTS, NCTS, NDTSATB/NTB1600 - 2000A(Rear Connected BPS)G3ACTB, ADTB, NCTB, NDTBATS/NTS34 (864)72 (1829)20 (508)38 (965)91 (2311)48 (1219)38 (965)87 (2210)23 (584)38 (965)91 (2311)60 (1524)38 (965)91 (2311)60 (1524)38 (965)87 (2210)38 (965)91 (2311)48 (1219)38 (965)91 (2311)60 (1524)38 (965)91 (2311)60 (1524)91 (2311)72 (1829)91 (2311)72 (1829)91 (2311)96 (2438)60(1524)ATS/NTS60ACTS, ADTS, NCTS, NDTS(1524)ATB/NTB60ACTB, ADTB, NCTB, NDTB(1524)ATS/NTS60(1524)91 (2311)72 (1829)60(1524)91 (2311)96 (2438)60(1524)91 (2311)72 (1829)60(1524)91 (2311)96 (2438)ATB/NTB2600 , 3000A(Rear Connected BPS)4ACTB, ADTB, NCTB, NDTBATS/NTS4000 A(Rear Connected ATS)ACTS, ADTS, NCTS, NDTSATB/NTB4000A(Rear Connected BPS)4ACTB, ADTB, NCTB, NDTB1445 (659)1005 (458)1105 (504)2385 (1086)2485 (1131)1645 (749)1745 (794)2990 (1364)ATB/NTB4480 (219)1420 (648)(597)ACTB, ADTB, NCTB, NDTBACTS, ADTS, NCTS, NDTS470 (214)2890 (1318)2600 - 3000A(Rear Connected BPS)26001, 3000A1(Rear Connected ATS)Weightlb (kg)23.5ACTS, ADTS, NCTS, NDTS4000A(Rear Connected BPS)U3Type 1 Enclosure1, 2Height InDepth In(mm)(mm)2600 - 3000A(Rear Connected ATS)4000A(Rear Connected ATS)U3Width In(mm)1350 (616)1400 (638)2385 (1088)2565 (1170)2180 (994)2230 (1017)2930 (1329)3360 (1532)2290 (1044)2380 (1085)6325 (2884)6925 (3158)5200 (2373)5300 (2418)6700 (3057)6725 (3069)5400 (2464)5600 (2555)6900 (3149)6925 (3160)Notes:1. Consult ASCO for dimensions on enclosure other than UL Type 1.2. For Bypass-Isolation Switches Only: handles extend 6-1/4 inches (159 mm).3. Enclosures are free standing with removable top, sides and back.4. Recommended clearance to enclosure: 3 feet (914 mm) from rear, 4 feet (1219 mm
1. Consult ASCO for dimensions on enclosures other than UL type 1. 2. Open weights include transfer switch and control panel. 1200-4000 amp enclosures require ventilation openings, refer to drawings for details. 3. Enclosures are free-standing with removable top, sides, and back. 4. Order accessory 40MY for 1600A and 40NY for 2000A front .
Product Guide 2018. . 1700V IGBT Modules Bi-directional Switches, Choppers, Dual Switches, Half Bridges and Single Switches 04 3300V IGBT Modules Choppers, Dual Switches, Half Bridges and Single Switches 05 4500V IGBT Modules Choppers, Single Switches 06 6500V IGBT Modules Choppers, Single switches 06 IGBT Press-pack 06 Custom IGBT Modules 07
The Cisco Nexus 5600 platform is the third generation of the Cisco Nexus 5000 Series Switches: the industry's leading data center server access switches. The Cisco Nexus 5600 platform switches can be categorized into 10-Gbps and 40-Gbps switches. This data sheet focuses on the 10-Gbps switches only. Cisco Nexus 5600
ebay,4life transfer factor eczema,4life transfer factor effectiveness,4life transfer factor en el salvador,4life transfer factor en espanol,4life transfer factor en español,4life transfer factor energy go stix,4life transfer factor enummi,4life transfer factor 4life transfer factor equine,4li
micro-signal switches tact and key switches power tool switches foot switches . milled bearing blade 13.4 16 0.4 14.7 0.5 0.8 - 1.8 ag 1 zzz 1004.3503 z 13.4 16 0.3 14.7 . miniature snap-action switches sensors micro-signal switche
1.3 Dell Networking 8100 Support Dell Networking 81xx/81xxF switches can be stacked with Dell Networking N4000 switches, but only if all switches in the stack are running 6.0.0.8 firmware or later, and all switches in the stack are running the same firmware revision. The firmware must be applied to the switches before they are added to the stack.
913-888-2630 800-676-6794 Sorinc.com Form 901 (05.16) Sor inc. 1 Table of Contents Pressure Switches 2 differential Switches 4 transmitters 6 Temperature Switches 7 Sensors 8 Flow 9 Switches transmitters 9 Level Switches 10 transmitters & indicators 12
Mar 20, 2018 · Data Center Switches 5000 Series The D-Link 5000 Series Data Center Switches are a series of high-performance switches that feature high port density, routing, and ultra-low latency, designed to be deployed as Top-of-Rack (ToR) or leaf-spine switches in data
Description—Firetrol Power Transfer Switches are available completely assembled with Firetrol Limited Service Electric Fire Pump Controllers. The power transfer switches are built for use with generator set or 2nd utility use. The entire package of power transfer switch and controller is completely factory assembled, wired, tested
