DSR-7401 INSTALLATION INSTRUTIONS
DSR-7401 INSTALLATION INSTRUCTIONSThe following instructions are for installation and authorization of an ARRIS DSR-7401 to receive HBOand Cinemax services from Galaxy 14, Transponders 8 and 16 and Galaxy 15 transponder 19.The DSR-7401 is designed for simple setup requiring only one (1) menu screen in the user interface, withall other configurations completed by HBO’s satellite broadcast control system, upon authorization.Follow the six (6) high-level steps below to setup your receiver and acquire the desired signal(s).Steps1.2.3.4.5.6.Rack mount the unit.Connect two RF satellite inputs.Connect ASI output(s).Connect AC power.Enter frequency and modulation parameters in the Quick Install menu, to gain Signal lock.Contact HBO’s technical assistance and authorization hotline at 212.512.5666 to request unitauthorization.Information is also provided on how to order a spare DSR-7401 unit to backup your production receiver.The DSR-7401 user manual can be downloaded through the unit’s web interface using a PC connectionfor additional operating instructions.
1. Rack Mount the DSR-7401The DSR-7401 unit, with the supplied mounting brackets is designed for installation in an EIA standard19-inch (480 mm) equipment rack. Place the unit in a stable and level position within the rack andensure that all front rack-ear mounting screws are fully tightened, to support the unit with no possiblemotion as connections are made and initial programming occurs.2. Create RF ConnectionsConnect RF input signals according to the services you will be receiving. The DSR-7401 includes 4separate tuners allowing you to simultaneously receive feeds from multiple satellite transponders ifrequired.FeedsEast Coast Feeds OnlyPort 1Galaxy 15-19 (C-Band Horizontal)West Coast Feeds OnlyN/AEast and West Coast FeedsGalaxy 15-19 (C-Band Horizontal)Port 2Galaxy 14-8 and G14-16 (C-BandVertical)Galaxy 14-8 and G14-16 (C-BandVertical)Galaxy 14-8 and G14-16 (C-BandVertical)Port 3Galaxy 14-15 (C-Band Horizontal)Galaxy 14-15 (C-Band Horizontal)Galaxy 14-15 (C-Band Horizontal)The example below shows the case for receiving both East and West Coast feeds.Port 1: Galaxy 15 C-Band HorizontalPort 2: Galaxy 14 C-Band VerticalPort 3: Galaxy 14 C-Band HorizontalGalaxy 15 HorizontalGalaxy 14 HorizontalGalaxy 14 VerticalCopyright 2017 – ARRIS Enterprises Inc. All rights reserved.2
3. Create Output ConnectionsFor ASI output, use ASI OUT 1 and ASI OUT 2 to carry MPEG-4 HD Pass-through video services andMPEG-2 SD transcoded video services.ASI OUT 1: Is the “Pass-through” port that will output MPEG4 HD Video services without transcoding orother processing.ASI OUT 2: Is the “Transcoded” port that will output MPEG2 SD video services.Pass-through ServicesTranscoded ServicesNote: If using the IP output please refer to page 41 of the user manual, for detailed instructions.4. Connect to AC powerWhen connected to AC power the unit takes about 90 seconds to boot up.When the unit has fully booted the main menu will appear.DSR-7401 Front Panel Control ButtonsCopyright 2017 – ARRIS Enterprises Inc. All rights reserved.3
Copyright 2017 – ARRIS Enterprises Inc. All rights reserved.4
5. Manually Tune, to gain Signal lockSelect Quick Install from the Main Menu by pressing the OK button with Quick Install highlighted.The following information will be presented.The first 2 lines are read only and show the Unit Addresses for your receiver. Write down theseaddresses for use in the next step: 6. Authorization.Lines 3 and 4 are used to configure your receiver to acquire the appropriate satellite signal.Set and verify the following fields, also shown in the picture above.Input Port – RF Port 1 if you’re taking East Coast feeds or East and West Coast feeds. Port 2 should betuned if taking only West Coast feeds.Transponder – 19 for Galaxy 15 (East Feeds) or Transponder – 8 or 16 for Galaxy 14 (West Feeds).Frequency should automatically display: 1070.00 (Galaxy 15 T-19: East Feeds), 1130.00 (Galaxy 14 T-16:West Feeds) or 1290.00 (Galaxy 14 T-8: West Feeds)Input Port – RF Port 1Modulation Mode – DVBS2 (default)Symbol Rate – 30.00 (default)Note: Even when using multiple RF ports, only the first port needs to be defined in this menu.Signal AcquisitionIn a moment the Signal light will turn green indicating that the satellite signal has been acquired. If youare unable to acquire a signal call ARRIS Technical Support at 888.944.4357 for assistance.Copyright 2017 – ARRIS Enterprises Inc. All rights reserved.5
6. AuthorizationOnce the unit has acquired the signal on Galaxy 14 or Galaxy 15 it is ready to be authorized using the 2Unit Addresses UA1 and UA2 obtained from the Quick Install menu.UA 1: UA 2:Contact HBO’s technical assistance and authorization hotline at 212.512.5666 to verify your installationand to request unit authorization.When the unit receives the authorization message, the Authorized light will turn green.Copyright 2017 – ARRIS Enterprises Inc. All rights reserved.6
Connection to Headend NetworkOnce authorization is complete your DSR-7401 will be remotely configured by uplink messaging for alldesired services and can be connected to the head end distribution network.The output program numbers for the Pass-through MPEG-4 HD (ASI 1) and Transcoded MPEG-2 SD (ASI2) services are shown in the table below.Processor123456789101112TypePass-through MPEG-4 HDTranscoded MPEG-2 SDPass-through MPEG-4 HDOutput MPEG Program1101ASI 91Transcoded MPEG-2 SD1092Pass-through MPEG-4 HD101Transcoded MPEG-2 SD1102Pass-through MPEG-4 HD111Transcoded MPEG-2 SD1112Pass-through MPEG-4 HD121Transcoded MPEG-2 SD1122Transcoded MPEG-2 SDPass-through MPEG-4 HDTranscoded MPEG-2 SDPass-through MPEG-4 HDTranscoded MPEG-2 SDPass-through MPEG-4 HDTranscoded MPEG-2 SDPass-through MPEG-4 HDTranscoded MPEG-2 SDPass-through MPEG-4 HDTranscoded MPEG-2 SDPass-through MPEG-4 HDTranscoded MPEG-2 SDPass-through MPEG-4 HDCopyright 2017 – ARRIS Enterprises Inc. All rights reserved.7
Don’t Forget Your BackupWith the transition of the HBO and Cinemax services to MPEG-4 HD only distribution it’s important toconsider your backup options. Any receivers you have been using to receive these services will nolonger be functional as either primary or backup units for the MPEG-4 services. The only viable receiversto use as shelf-spares for backing up the MPEG-4 services is the DSR-7401 (12 services) or DSR-7403 (3services) transcoders.ARRIS’s distributors have available inventory of both the DSR-7401 and DSR-7403 transcoders. You areencouraged to contact one of the distributors listed below to purchase a shelf-spare to guaranteesustained and uninterrupted delivery of the HBO and Cinemax services to your subscriber base.ARRIS authorized distributors:Advanced Media Technologies3150 SW 15TH StreetDeerfield Beach, FL 33442Phone: 888.293.5856Fax: 954.427.9688TVC Communications10814 W. 78th St.Shawnee, KS 66214Phone: 800.932.1555Fax: 913-962-1806Contacts: Ken Augustine and Neil BaruchContact: Brent ScottThank you for your continued support.Copyright 2017 – ARRIS Enterprises Inc. All rights reserved.8
Input Port – RF Port 1 if you’re taking East oast feeds or East and West oast feeds. Port 2 should be tuned if taking only West Coast feeds. Transponder – 19 for Galaxy 15 (East Feeds) or Transponder – 8 or 16 for Galaxy 14 (West Feeds). Frequency should automatically display: 1070.
DSR-450WS DSR-400 DSR-570WS DSR-390 HVR-Z1U DSR-250 HVR-A1U DSR-PD170 DSR-PD150 DSR-PDX10 FEATURES VTR-like Controls The HVR-DR60 is equipped with buttons that provide VTR-like control for functions such as record,play,stop,next,previous,fast forward (approximately three times normal speed),and fast rewind (approximately three times normal .
captured with the Sony DXC-D35WS Digital Video Camera, and the DSR-500WS and DSR-PD100A DVCAM Camcorders. VITC (Vertical Interval Time Code) In addition to time code conforming to the SMPTE (for NTSC)/EBU (for PAL) format, the DSR-1800 and the DSR-1600 support VITC. This time code is
The DSR-2000A is fully equipped with an RS-422A interface that is the industry standard for professional editing. It allows the DSR-2000A to interface with Sony VTRs, editing controllers and non-linear editing systems. 16:9 Aspect Ratio Capability By receiving a wide aspect ID signal, the DSR-2000A records and plays
DSR Disaster Recovery Guide Introduction DSR-8.0/8.1 6 February 2018 1.0 Introduction 1.1 Purpose and Scope This document is a guide to describe procedures used to execute disaster recovery for DSR Rack Mount Server deployment. This includes recovery of partial or complete loss RMS servers. The audience for this
IPL Permanent Hair Removal Device 100k Invention Works B.V. info@skinera.eu www.skinera.eu with Intense Pulsed Light Technology Instrutions for use Instrutions utiisation eruiksinstruties Instruiones e uso anuae oerativo Beienunsaneitun EN IT FR NL ES DE IT Skinera JEWEL UM 2298A cover ED89-04.indd 1 1/24/2017 9:48:28
The Sony HVR-DR60 Hard Disk Recording Unit offers the same HYBRID concept for improving the production process. The HVR-DR60 has a 60-GB HDD which offers a longer recording time of approximately 4.5 hours (270 . DSR-390/P * * — — DSR-250/1, DSR-250P/1 * — .
Cloud Disaster Recovery Guide F12351-01 DSR - 8.4 6 F12351-01 1.0 Introduction 1.1 Purpose and Scope This document is a guide to describe procedures used to execute disaster recovery for DSR (3-tier deployments). This includes recovery of partial or a complete loss of one or more DSR servers. The
Second Grade – English/Language Arts Kentucky Core Academic Standards with Targets Student Friendly Targets Pacing Guide . Page 2 of 40 Revised 2/28/2012 College and Career Readiness Anchor Standards for Reading The K-5 standards on the following pages define what students should understand and be able to do by the end of each grade. They correspond to ten broad College and Career Readiness .
