MASON INDUSTRIES, Inc. SLR - Resource.bakerdist
MASON INDUSTRIES, Inc.Manufacturers of Vibration Control Products350 Rabro DriveHauppauge, NY 11788631/348-0282FAX 631/348-0279Info@Mason-Ind.com2101 W. Crescent Ave., Suite DAnaheim, CA 92801714/535-2727FAX 714/535-5738Info@MasonAnaheim.comD - 4 Tapped HolesEEEECUSTOMERMASON M.I.DWG. NO.TYPE SLR RATINGSWERatedCapacityIbs kgSizeLSteel Spacer Removed afteradjustment2” (51mm) DeflectionC2 SERIESSPRING MOUNTSCUSTOMER P.O.D - 2 Tapped HolesTapped HoleArrangementfor SLR-16OnlySLRJOB nstantSpringin mm Ibs/in kg/mm 002.002.002.002.002.002.002.0051 5445 96.951 6930 123.351 8415 149.751 7260 129.151 9240 164.451 11220 199.651 9680 172.251 12320 219.151 14960 266.1Mounts are painted blue. *with Red inner spring.Vertical LimitStops - Out ofcontact duringnormal operationAdjustmentBoltHCLHCWIllustration shows a SLR-12-C2which contains 12 C2 springs.SLR-9 & -16 have 9 and 16 C2spring respectively.SPRING DATASpring ODSizein mmC22 7/8 73NeopreneAcousticalPadPublished ratings allow minimum 25%additional travel to solid. For a full 50%specified minimum use the following ratings:Non-Skid NeopreneFriction Pad - Whennot using for seismic orwind resistance, boltingto floor is not necessary.MBDFree Ht.inmm5127DeratedCapacityIbs LR-16-29920RatioRatioKx/KyOD/OH0.63-0.85 42TYPE SLR DIMENSIONS (inches mm)SizeSLR-9-C2SLR-12-C2SLR-16-C2DEHLWTHCLHCW3/4 1 3/4 44 9 3/4 248 16 1/2 419 5/8 16 9 3/4 248 14356 3 763/4 1 3/4 44 9 3/4 248 19 1/2 495 3/4 19 9 3/4 248 17432 3 763/4 1 3/4 44 9 3/4 248 23 1/2 597 3/4 19 13330 21 1/2 546 11 279CERTIFICATION DATAMBD5/8 165/8 163/4 19SPECIFIED DEFLECTIONTAG :UNIT :1:6 :PLAN VIEW OF MOUNT LOCATION :2:7 :3:8 :4:9 :5:10 :Click with mouse for each location Sets SilverGray*Silver*DWN:CHKD:DATE:DWG. No.
MASON INDUSTRIES, Inc.350 Rabro DriveHauppauge, NY 11788631/348-0282FAX 631/348-0279CUSTOMER2101 W. Crescent Ave., Suite DAnaheim, CA 92801714/535-2727FAX 714/535-5738CUSTOMER P.O.D-NCTapped HoleEE EEEE EEDWG No.RELEASEDINSTALLEDPOSITIONTYPE SLR 09110111112113114115116117118Adjustment BoltNeopreneBushingSpacer BarHNeopreneDown StopInternalNeopreneAcoustical PadHMBDMBDHCLHCLL LHCWHCWW WTExternal NeopreneFriction PadTAll springs have additional travel to solid equal to 50% of the Rated Deflection.Solid Spring Height Free Height minus 1.5 times Rated Deflection.OD/OH Ratio of Spring Outside Diameter to Operating Height 0.82-1.15TYPE SLR DIMENSIONSLWSize (in) (mm) (in) (mm)101 9229 41/2 114102 9229 41/2 114103 9229 41/2 114104 9229 41/2 114105 9229 41/2 114106 9229 41/2 114107 9229 41/2 114108 93/4 248 5127109 93/4 248 5127110 111/2 292 51/2 140111 111/2 292 51/2 140112 111/2 292 7178113 111/2 292 7178114 14356 8203115 14356 8203116 161/2 419 9229117 191/2 495 10254118 191/2 495 10254HTMBD(in) (mm) (in) (mm) (in) (mm)1/2 131/2 13101/4 2601/2 131/2 13101/4 2601/2 131/2 13101/4 2601/2 131/2 13101/4 2601/2 131/2 13101/4 2601/2 131/2 13101/4 2601/2 131/2 13101/4 2601/2 131/2 13111/2 2921/2 131/2 13111/2 2925/8 161/2 13123055/8 161/2 13123055/8 165/8 16137/8 3525/8 165/8 16137/8 3525/8 165/8 16153815/8 165/8 16153813/4 197/8 22163/4 42520508 125 12520508 125 125HCW(in) (mm)31/4 8331/4 8331/4 8331/4 8331/4 8331/4 8331/4 8333/4 9533/4 9531/2 8931/2 8941/2 11441/2 11441/2 11441/2 11451/2 tionConstantMax. G(lbs) (kg)(in) (mm) (lbs/in) (kg/mm) Rating12557 2.50 64500.895.620091 2.50 64801.423.5310141 2.50 641252.202.3500227 2.50 642003.551.4740336 2.40 613105.510.91050476 2.10 535008.980.71400635 2.00 51700 12.450.51660753 2.05 52810 14.481.02250 1021 2.00 511125 20.020.73000 1361 2.00 511500 26.691.34000 1814 2.00 512000 35.571.05300 2404 2.00 512665 47.140.67100 3221 2.00 513550 63.160.59300 4218 2.00 514650 82.710.512600 5715 2.00 516300 112.060.416800 7620 2.00 518400 149.410.428500 12927 2.55 65 11175 198.880.440000 18144 2.10 53 19000 342.340.4HCLDE(in) (mm) (in) (mm) (in) (mm)1/2 13 11/8 2973/4 1971/2 13 11/8 2973/4 1971/2 13 11/8 2973/4 1971/2 13 11/8 2973/4 1971/2 13 11/8 2973/4 1971/2 13 11/8 2973/4 1971/2 13 11/8 2973/4 1975/8 16 11/8 2981/4 2105/8 16 11/8 2981/4 2105/8 16 11/8 29102545/8 16 11/8 29102545/8 16 11/4 3291/2 2415/8 16 11/4 3291/2 2413/4 19 13/8 35113/4 2983/4 19 13/8 35113/4 2987/8 22 11/2 38141/2 36817432 125 13/4 4417432 125 13/4 44PLAN VIEW OF MOUNT LOCATIONSClick with mouse for each location 2” 51mm Deflection100 SeriesSpring MountingsMASON M.Info@Mason-Ind.com www.Mason-Ind.comLOCKEDSHIPPINGPOSITIONSLRJOB NAMEManufacturers of Vibration Control ProductsOD(in) (mm)33/49533/49533/49533/49533/49533/49533/49541/2 11441/2 1145127512751/2 140615263/4 17163/4 17173/4 19783/4 22293/8 238HT(in) (mm)53/4 14653/4 14653/4 14653/4 14653/4 14657/8 14957/8 14963/4 17171/2 19171/2 19171/2 19181/2 21683/4 2221025410254101/8 257131/8 333131/8 lue/SilvBlue/GraySPECIFIED DEFLECTION1:6:2:7:3:8:4:9:5:10:Sets Required:INSTALLATION INSTRUCTIONS:1. Supports for mountings must be level toinstallations’ acceptable tolerances.2. Mountings not subjected to seismic or windforces do not require bolting to supports.3. Mountings subjected to seismic or windforces must be bolted or welded in position.4. If mountings are welded in position removelower friction pad before welding.5. Set mountings in the Locked Position.6. Place equipment on mountings and secure byusing a minimum of two bolts or by welding.7. Release restraining nuts and leave 1/8 inchclearance. If two nuts are furnished, lockthem together at 1/8 inch clearance.8. Take 12 complete counter-clockwise turns oneach adjustment bolt.9. Take one additional complete turn on eachadjustment bolt in sequence until you canremove the spacer bar on the first mount.10. Take no additional turns on that mount butcontinue with equal turns on the others untilall space bars are removed.NOTE - Some equipment requires supplementary steel between the unit and the isolators. Check equipment manufacturers’ recommendations.DWNCHKDDATEDWG No.Certification Form S-257 04/2014
MASON INDUSTRIES, Inc.Manufacturers of Vibration Control Products350 Rabro Drive2101 W. Crescent Ave., Suite DHauppauge, NY 11788Anaheim, CA 92801631/348-0282714/535-2727FAX 631/348-0279FAX mwww.Mason-Ind.comD-NCTapped HoleLOCKEDSHIPPINGPOSITIONEE EEE EEECUSTOMERCUSTOMER P.O.DWG No.RELEASEDINSTALLEDPOSITIONTYPE SLR 139140141142143Adjustment BoltSpacer BarHNeopreneDown StopInternalNeopreneAcoustical PadHMBDMBDExternal NeopreneFriction PadHCLHCLL LHCWHCWW WTTAll springs have additional travel to solid equal to 50% of the Rated Deflection.Solid Spring Height Free Height minus 1.5 times Rated Deflection.OD/OH Ratio of Spring Outside Diameter to Operating Height 0.82-1.15TYPE SLR DIMENSIONSLWSize (in) (mm) (in) (mm)126 9229 41/2 114127 9229 41/2 114128 9229 41/2 114129 93/4 248 5127130 93/4 248 5127131 93/4 248 5127132 111/2 292 51/2 140133 111/2 292 7178134 111/2 292 7178135 111/2 292 7178136 14356 8203137 151/4 384 9229138 151/4 384 9229139 151/4 384 9229140 173/4 451 10254141 201/4 514 10254142 21533 11279143 22559 12305H(in) (mm)101/4 260101/4 260101/4 260111/2 292111/2 292111/2 29212305137/8 352137/8 352137/8 35215381157/8 403157/8 403171/8 4352050821533213/4 552227/8 581T(in) (mm)3/8 103/8 103/8 103/8 103/8 103/8 101/2 131/2 131/2 131/2 131/2 131/2 131/2 131/2 135/8 163/4 195/8 165/8 16MBDHCW(in) (mm) (in) (mm)1/2 1331/4 831/2 1331/4 831/2 1331/4 831/2 1333/4 951/2 1333/4 951/2 1333/4 951/2 1331/2 895/8 1641/2 1145/8 1641/2 1145/8 1641/2 1145/8 1641/2 1143/4 1961523/4 1961523/4 1961527/8 227178125820312583/4 222125 10254HCL(in) (mm)73/4 19773/4 19773/4 19781/4 21081/4 21081/4 2101025491/2 241911/2 24191/2 241113/4 2981333013330133301538117432173/4 451183/4 476PLAN VIEW OF MOUNT LOCATIONSClick with mouse for each location RatedRatedSpringCapacityDeflectionConstantMax. G(lbs) (kg)(in) (mm) (lbs/in) (kg/mm) Rating19588 3.25 83601.063.6280127 3.25 83851.532.5390177 3.25 831202.131.8520236 3.25 831602.843.1710322 3.25 832203.882.3940426 3.25 832905.131.71280581 3.25 833957.003.11770803 3.25 835459.671.82490 1129 3.25 83765 13.601.33300 1497 3.25 831000 18.041.04500 2041 3.25 831370 24.591.16200 2818 3.25 831900 33.881.18300 3765 3.25 832560 45.360.811400 5171 3.25 833500 62.300.415200 6895 3.25 834685 83.070.520300 9208 3.25 836245 110.940.528400 12882 3.25 838750 155.200.539000 17690 3.25 83 12000 213.130.5D(in) (mm)1/2 131/2 131/2 135/8 165/8 165/8 165/8 165/8 165/8 165/8 163/4 197/8 227/8 227/8 22125125125125EODHT(in) (mm) (in) (mm) (in) (mm)11/8 29 33/4 95 63/8 16211/8 29 33/4 95 61/2 16511/8 29 4102 61/2 16511/8 29 4102 717811/8 29 41/2 114 71/4 18411/8 29 41/2 114 71/2 19111/8 29 5127 77/8 20011/4 32 51/2 140 91/4 23511/4 32 51/2 140 91/4 23511/4 32 6152 91/2 24113/8 35 63/4 171 93/4 24815/8 41 73/4 197 107/8 27615/8 41 73/4 197 1127915/8 41 73/4 197 121/4 311251 83/4 222 123/4 324251 91/2 241 131/2 343251 101/4 260 15381251 11279 161/8 /SilverBlue/GrayBlue/GrnBlue/YellowSPECIFIED DEFLECTIONTAG:UNIT:3” 76mm Deflection100 SeriesSpring MountingsMASON M.RestrainingNutNeopreneBushingSLRJOB NAME1:6:2:7:3:8:4:9:5:10:Sets Required:INSTALLATION INSTRUCTIONS:1. Supports for mountings must be level toinstallations’ acceptable tolerances.2. Mountings not subjected to seismic or windforces do not require bolting to supports.3. Mountings subjected to seismic or windforces must be bolted or welded in position.4. If mountings are welded in position removelower friction pad before welding.5. Set mountings in the Locked Position.6. Place equipment on mountings and secure byusing a minimum of two bolts or by welding.7. Release restraining nuts and leave 1/8 inchclearance. If two nuts are furnished, lockthem together at 1/8 inch clearance.8. Take 17 complete counter-clockwise turnson each adjustment bolt.9. Take one additional complete turn on eachadjustment bolt in sequence until you canremove the spacer bar on the first mount.10. Take no additional turns on that mount butcontinue with equal turns on the others untilall spacer bars are removed.NOTE - Some equipment requires supplementary steel between the unit and the isolators. Check equipment manufacturers’ recommendations.DWNCHKDDATEDWG No.Certification Form S-25802/2013
MASON INDUSTRIES, Inc.CUSTOMER350 Rabro Drive2101 W. Crescent Ave., Suite DHauppauge, NY 11788Anaheim, CA 92801631/348-0282714/535-2727FAX 631/348-0279FAX mwww.Mason-Ind.comD-NC Tapped HoleLOCKEDSHIPPINGPOSITIONEE EEEE EECUSTOMER P.O.DWG No.TYPE SLR ax. GSize(lbs) (kg)(in) (mm) (lbs/in) (kg/mm) Rating150240109 4.38 121550.98 16.7151330150 4.38 121751.35 12.1152420191 4.38 121951.729.5153530240 4.38 1211202.167.5154680308 4.38 1211552.774.7155880399 4.38 1212003.593.61561120508 4.38 1212554.584.51571420644 4.38 1213255.803.51581840835 4.38 1214207.522.71592370 1075 4.38 1215409.683.01603000 1361 4.38 121695 12.261.71613900 1769 4.38 121895 15.941.31625100 2313 4.38 1211155 20.841.61636500 2948 4.38 1211485 26.561.21648400 3810 4.38 1211910 34.321.016510800 4899 4.38 1212455 44.141.016613800 6260 4.38 1213160 56.400.616717800 8074 4.38 1214065 72.740.516822900 10387 4.38 1215235 93.580.616930000 13608 4.38 1216730 122.590.5RELEASEDINSTALLEDPOSITIONAdjustment BoltSpacer BarHNeopreneDown StopInternalNeopreneAcoustical PadHMBDMBDWExternal NeopreneFriction PadHCLL HCLHCWW HCWLTTAll springs have additional travel to solid equal to 50% of the Rated Deflection.Solid Spring Height Free Height minus 1.5 times Rated Deflection.OD/OH Ratio of Spring Outside Diameter to Operating Height 0.82-1.15TYPE SLR DIMENSIONSLWSize (in) (mm) (in) (mm)150 111/2 292 51/2 140151 111/2 292 51/2 140152 111/2 292 51/2 140153 111/2 292 51/2 140154 111/2 292 7178155 111/2 292 7178156 14356 8203157 14356 8203158 14356 8203159 151/4 384 9229160 151/4 384 9229161 151/4 384 9229162 173/4 451 10254163 173/4 451 10254164 173/4 451 10254165 201/4 514 10254166 22559 11279167 22559 11279168 23584 12305169 23584 12305H(in) (mm)12305123051230512305137/8 352137/8 352153811538115381157/8 403171/8 435171/8 43520508205082050821533221/4 565221/4 5652563525635T(in) (mm)1/2 131/2 131/2 131/2 131/2 131/2 131/2 131/2 131/2 131/2 131/2 131/2 135/8 165/8 165/8 163/4 193/4 193/4 193/4 193/4 19MBD(in) (mm)1/2 131/2 131/2 131/2 135/8 165/8 165/8 165/8 165/8 163/4 193/4 193/4 197/8 227/8 227/8 22125125125125125HCW(in) (mm)31/2 8931/2 8931/2 8931/2 8941/2 11441/2 11441/2 11441/2 11441/2 (in) (mm)1025410254102541025491/2 24191/2 241113/4 298113/4 298113/4 29813330133301333015381153811538117432183/4 476183/4 476193/4 502193/4 502PLAN VIEW OF MOUNT LOCATIONSUNIT:D(in) (mm)5/8 165/8 165/8 165/8 165/8 165/8 163/4 193/4 193/4 197/8 227/8 227/8 22125125125125125125125125E(in) (mm)11/8 2911/8 2911/8 2911/8 2911/4 3211/4 3213/8 3513/8 3513/8 3515/8 4115/8 4115/8 41251251251251251251251251OD(in) (mm)5127512751275127615261526152615263/4 17163/4 17173/4 19773/4 19783/4 22283/4 22283/4 22293/4 248102541127911279115/8 295HT(in) (mm)83/8 21381/2 21683/8 21383/8 21387/8 22591/8 23297/8 25110254103/8 264111/8 283107/8 276113/8 289111/2 292131/4 337133/8 340141/8 359153/8 391157/8 PinkBlue/TanSPECIFIED DEFLECTIONTAG:Click with mouse for each location 4” 102mm Deflection100 SeriesSpring MountingsMASON M.RestrainingNutNeopreneBushingSLRJOB NAMEManufacturers of Vibration Control Products1:6:2:7:3:8:4:9:5:10:Sets Required:INSTALLATION INSTRUCTIONS:1. Supports for mountings must be level toinstallations’ acceptable tolerances.2. Mountings not subjected to seismic or windforces do not require bolting to supports.3. Mountings subjected to seismic or windforces must be bolted or welded in position.4. If mountings are welded in position removelower friction pad before welding.5. Set mountings in the Locked Position.6. Place equipment on mountings and secure byusing a minimum of two bolts or by welding.7. Release restraining nuts and leave 1/8 inchclearance. If two nuts are furnished, lockthem together at 1/8 inch clearance.8. Take 24 complete counter-clockwise turnson each adjustment bolt.9. Take one additional complete turn on eachadjustment bolt in sequence until you canremove the spacer bar on the first mount.10. Take no additional turns on that mount butcontinue with equal turns on the others untilall spacer bars are removed.NOTE - Some equipment requires supplementary steel between the unit and the isolators. Check equipment manufacturers’ recommendations.DWNCHKDDATEDWG No.Certification Form S-25902/2013
MASON INDUSTRIES, Inc.Manufacturers of Vibration Control Products2101 W. Crescent Ave., Suite D350 Rabro DriveAnaheim, CA 92801Hauppauge, NY 11788714/535-2727631/348-0282FAX 714/535-5738FAX mwww.Mason-Ind.comD -NC TAPPED HOLELOCKEDSHIPPINGPOSITIONEE EESLRJOB NAMECUSTOMERCUSTOMER P.O.5" Deflection100 SeriesSpring MountingsMASON M.I.DWG. NO.RELEASEDINSTALLEDPOSITIONAll springs have additional travelto solid equal to 50% of the rateddeflection.RESTRAINING NUTNEOPRENEBUSHINGHNEOPRENEDOWN STOPADJUSTMENT BOLTSPACER BARSolid Spring Height Free Heightminus 1.5 times Rated Deflection.INTERNAL NEOPRENEACOUSTICAL PADOD/OH Ratio of Spring OutsideDiameter to Operating Height 0.97 - 1.33.EXTERNAL NEOPRENEFRICTION PADMBDHCLLHCWWTTYPE SLR RATINGSRated Rated SpringCapacity Defl. 190600013675.37191730016705.37192900020405.37193 1100024825.37194 1330030285.37195 1630036945.37196 1980045065.37197 2420055005.37198 29000TYPE SLR DIMENSIONS 14141415 1/415 1/415 1/415 1/417 1/217 1/217 1/218 1/418 21414H15 1 /815 1/815 1/815 1/815 1 /815 1/215 1/215 1/215 1/218 5/818 5/818 5/818 5/819 7/819 7/819 7/821 7/821 7/824242425 1/225 3/43/43/43/43/43/43/43/43/43/43/4MBD HCW HCL5/84 1/2 105/84 1/2 105/84 1/2 105/84 1/2 105/84 1/2 105/84 1/2 11 3/45/84 1/2 11 3/45/84 1/2 11 3/45/84 1/2 11 3/43/41363/41363/41363/41367/815 1/467/815 1/467/815 1/467/815 1/277/815 1/27118 3/48118 3/48118 3/48121912191 1/420 3/4811 /420 3/48PLAN VIEW OF MOUNT /87/87/8111111111E1 1/41 1/41 1/41 1/41 1/41 1/81 1/81 1/81 1/81 5/81 5/81 5/81 5/81 5/81 5/81 5/8222222222OD66666 3/46 3/46 3/46 3/46 3/47 3/47 3/47 3/47 3/48 3/48 3/49 1/169 1/29 1/210 1/410 1/41111 3/811 5/81313SpringHTColor/Stripe9 7/8Purple10 1/16 Brown10Orange10 1/2Green10 3/4Red11 1/16 White11 3/8Blue11 1/8Black311 /8Yellow712 /16 Gray11 7/8Pink12Silver12 3/4Tan12 3/4Blue/Orange13 3/8Blue/Red13 7/16 Blue/White514 /8Blue/Yellow15 3/16 Blue/Silver15 5/8Blue/Gray16Blue/Tan16 1/4Blue/Brown17 1/8Blue/Pink18Blue/Black19 1/2Blue/Green19 1/2Blue/PurpleSPECIFIED DEFLECTIONTAG :UNIT :Click with mouse for each location 1:6 :2:7 :3:8 :4:9 :5:10 :Sets Required:4. If mountings are welded in position remove8. Take 30 complete counter-clockwise turnslower friction pad before welding.on each adjustment bolt.5. Set mountings in the Locked Position.9. Take one additional complete turn on each6. Place equipment on mountings and secure byadjustment bolt in sequence until you canusing a minimum of two bolts or by welding.remove the spacer bar on the first mount.7. Release restraining nuts and leave 1/8 inch10. Take no additional turns on that mount butclearance. If two nuts are furnished, lock themcontinue with equal turns on the others untiltogether at 1/8 inch clearance.all space bars are removed.NOTE - Some equipment requires supplementary steel between the unit and the isolators. Check equipment manufacturers’ recommendations.INSTALLATION INSTRUCTIONS:1. Supports for mountings must be levelto installations’ acceptable tolerances.2. Mountings not subjected to seismic or windforces do not require bolting to supports.3. Mountings subjected to seismic or windforces must be bolted or welded in position.FORM S-28802/2013DWN:CHKD:DATE:DWG. No.
MASON INDUSTRIES, Inc.CUSTOMER350 Rabro Drive2101 W. Crescent Ave., Suite DHauppauge, NY 11788Anaheim, CA 92801631/348-0282714/535-2727FAX 631/348-0279FAX mEEESTEEL SPACER Removed afteradjustmentTYPE SLR RATINGST1/4” 6mmNEOPRENEACOUSTICALPADS INSIDELFERROUSSPRING HOLDERNON-SKID NEOPRENEFRICTION PAD - Whennot using for seismic orwind resistance, boltingto floor is not necessary.Illustration shows a 4 spring SLR-4.SLR-6 -9 & -12 have 6, 9 and 12springs respectively.RatedCapacity(Ibs) (kg)SizeHHCWMBD- Max.Bolt DiameterDWG. NO.EHCLWMASON M.I.“D” TAP - 2 Holes unlessotherwise requestedADJUSTMENT BOLTVERTICALLIMITSTOPS Out ofcontactduringnormaloperation1” (25mm)DeflectionC SERIESSpring MountsCUSTOMER P.O.TAPPED HOLE ARRANGEMENTfor SLR-6 OnlyESLRJOB NAMEManufacturers of Vibration Control 0RatedMountDeflConstantSpring(in) (mm) (Ibs/in) (kg/mm) *Red*Yellow*Yellow***with Red inner spring. **with Green inner spring.Mounts are painted blue.Designs usingthese mountsto resist windloads must be inaccordance withASCE 7-05.SPRING DATASpring ODFree Ht.RatioRatioSize(in) (mm) (in) (mm)Kx/KyOD/OHC2 7/8 734 1/8 105 0.90-1.10 0.92TYPE SLR DIMENSIONS (inches E1 3/8 351 3/4 451 3/4 451 3/4 451 3/4 457 1/28 3/89 3/49 3/49 3/4H191213248248248L13 1/217 3/416 1/21923 W152152229229330HCL12 1/4 31115 3/4 400143561743221 1/2 546HCW2 3/4 702 3/4 703763763 1/2 89CERTIFICATION DATAMBD5/8 163/4 195/8 165/8 163/4 19SPECIFIED DEFLECTIONTAG :UNIT :1:6 :PLAN VIEW OF MOUNT LOCATION :2:7 :3:8 :4:9 :5:10 :Material for O ne Set :FORM S-267 09/2008DWN:CHKD:DATE:Sets R equiredDWG. No.
MASON INDUSTRIES, Inc.350 Rabro DriveHauppauge, NY 11788631/348-0282FAX 631/348-0279Info@Mason-Ind.comEESteel Spacer Removed afteradjustment1” (25mm) DeflectionC SERIESSPRING MOUNTSCUSTOMER P.O.MASON M.I.DWG. NO.TYPE SLR RATINGSD - 2 Tapped HolesTapped HoleArrangementfor SLR-16OnlyEECUSTOMER2101 W. Crescent Ave., Suite DAnaheim, CA 92801714/535-2727FAX 714/535-5738Info@MasonAnaheim.comD - 4 Tapped HolesSLRJOB NAMEManufacturers of Vibration Control ProductsWLERatedCapacityIbs ntSpringin mm Ibs/in kg/mm Yellow*Yellow**Red*Yellow*Yellow**Mounts are painted blue. *with Red inner spring.Vertical LimitStops - Out ofcontact duringnormal Non-Skid NeopreneFriction Pad - Whennot using for seismic orwind resistance, boltingto floor is not necessary.MBDIllustration shows a SLR-12which contains 12 C springs.SLR-9 & -16 have 9 and 16 Cspring respectively.SPRING DATASpring ODSizein mmC2 7/8 73Free Ht.inmm4 1/8 105Designs usingthese mountsto resist windloads must be inaccordance withASCE 7-05.RatioRatioKx/KyOD/OH0.90-1.10 0.92TYPE SLR DIMENSIONS (inches mm)SizeSLR-9SLR-12SLR-16D3/43/43/4EHL1 3/4 45 9 3/4 248 16 1/2 4204831 3/4 45 9 3/4 248 191 3/4 45 9 3/4 248 23 1/2 495TWHCLHCWMBD5/8 16 9 229 14356 376 5/8 163/4 19 9 229 17432 376 5/8 163/4 19 13 330 21 1/2 546 3 1/2 89 3/4 19CERTIFICATION DATASPECIFIED DEFLECTIONTAG :UNIT :1:6 :PLAN VIEW OF MOUNT LOCATION :2:7 :3:8 :4:9 :5:10 :Click with mouse for each location Sets Required:S-158DWN:CHKD:DATE:DWG. No.
CUSTOMERCUSTOMER P.O.1" DeflectionA Series SpringMountingsMASON M.I.DWG. NO.FIXED EQUIPMENT ANCHORAGEOPA-0195Adjustment BoltTurn counter clockwise toload spring(s) and maintainfree and operating heightJanuary 6, 2003Rated Load Curves (LBS)2400SLR-4ABill Staehlin (916) 654-336218001500Neoprene VerticalLimit StopsOut of contactduring normaloperationNeopreneAcoustical CupTYPE SLR DIMENSIONS (inches)SizeLWHTSLR-A8 3/4 2 1/25 1/81 3/4SLR-2A 11 5/8 2 1/25 1/81 3/4SLR-4A 11 1/8 4 1/25 1/81 3/4230016001450"BD" Bolt DiameterBolt position can be reversedfor anchoring to floor.(See Detail at Right)SPRING DATASpringFreeODHeight3 - 3 3/81 3/4OSHPD OPA-0195sAPPROVEDCalifornia Office of StatewideHealth Planning and DevelopmentxiNOTE: Housings are galvanized.ºA"CS" Cap Screw Secures Height Saving Bracket(or Eqipment Base) to tappedconcentric hole in mountingAdjustment Bolt.SLRJOB NAME45Manufacturers of Vibration Control Products2101 W. Crescent Ave., Suite D350 Rabro DriveAnaheim, CA 92801Hauppauge, NY 11788714/535-2727631/348-0282FAX 714/535-5738FAX mwww.Mason-Ind.comVERTICALMASON INDUSTRIES, Inc.HCL68 3/48BD3/83/81/2SLR-A SLR-2ANon Skid Neoprene FrictionIsolation Pad - When not usedfor seismic or wind resistance,bolting to floor is not necessary.Pad can be removed if mount iswelded into position.(See Detail at Right)800 10002200HORIZONTALOPTIONAL MOUNT INSTALLATIONSCS3/8 13/8 11/2 1 1/4Welded in positionBolted on positionHeld in placeby Friction PadTYPE SLR RATINGSRatioRatioKx/KyOD/OH0.50 - 0.90 0.74 - 1.25SizeSLR-A-45Illustration shows a SLR-4A (4 springs). SLR-A has 1 spring and SLR- SLR-A-752A has 2 springs. All springs have additional travel to solid equal to SLR-A-12550% of the rated deflection.SLR-A-200Solid Spring Height Free Height minus 1.5 times Rated Deflection.SLR-A-310Housing load ratings in G’s are based on tests with bolted connections SLR-A-400to steel top and bottom. SLR housings require uniform support under SLR-A-510SLR-A-625entire base plate.SLR-2A-620Horizontal and Vertical plotted Ratings are California OSHPD approvedvalues having the OSHPD Anchorage Preapproval Number OPA-0195. SLR-2A-800SLR-2A-1020Testing and calculations were performed to meet OSHPD criteria.SLR-2A-1250To use approved OSHPD rated load curves:1. Calculate Vertical and Horizontal Forces on mounting includingSLR-4A-1240translations and overturning moments.SLR-4A-16002. Plot Horizontal Load vs Vertical Load.SLR-4A-2040The point must fall within the area below the OSHPD curve.SLR-4A-2500Max.Rated Rated SpringHoriz.Capacity Defl. Constant SpringStatic(lbs)(in) (lbs/in) Color G Rating45 1.6028 Blue17.8075 1.5050 Orange 10.70125 1.3394 Brown6.40200 1.15174 Black4.00310 1.00310 Yellow2.60400 1.00400 Green2.00510 1.00510 Red1.60625 1.00625 White1.30620 1.00620 Yellow1.60800 1.00800 Green1.301020 1.001020 Red1.001250 1.001250 White0.801240 1.001240 Yellow1.601600 1.001600 Green1.302040 1.002040 Red1.002500 1.002500 White0.80inch SPECIFIED DEFLECTIONPLAN VIEW OF MOUNT LOCATIONSTAG :UNIT :Click with mouse for each location 1:6 :2:7 :3:8 :4:9 :5:10 :Sets Required:FORM S-22709/2008DWN:CHKD:DATE:DWG. No.
CUSTOMERCUSTOMER P.O.25mm DeflectionA Series SpringMountingsMASON M.I.DWG. NO.FIXED EQUIPMENT ANCHORAGEOPA-0195Adjustment BoltTurn counter clockwise toload spring(s) and maintainfree and operating heightJanuary 6, 2003Rated Load Curves (kg)1089SLR-4ABill Staehlin (916) 654-33621043726658"BD" Bolt DiameterBolt position can be reversedfor anchoring to floor.(See Detail at Right)817680Neoprene VerticalLimit StopsOut of contactduring normaloperationTYPE SLR DIMENSIONSSizeLWHSLR-A22264130SLR-2A 29564130SLR-4A 283 114130SPRING DATASpringFreeODHeight4475-8 6OSHPD OPA-0195sAPPROVEDCalifornia Office of StatewideHealth Planning and DevelopmentxiNOTE: Housings are galvanized.ºA"CS" Cap Screw Secures Height Saving Bracket(or Eqipment Base) to tappedconcentric hole in mountingAdjustment Bolt.SLRJOB NAME45Manufacturers of Vibration Control Products2101 W. Crescent Ave., Suite D350 Rabro DriveAnaheim, CA 92801Hauppauge, NY 11788714/535-2727631/348-0282FAX 714/535-5738FAX mwww.Mason-Ind.comVERTICALMASON INDUSTRIES, Inc.NeopreneAcoustical CupT444444HCL152222203SLR-A SLR-2ANon Skid Neoprene FrictionIsolation Pad - When not usedfor seismic or wind resistance,bolting to floor is not necessary.Pad can be removed if mount iswelded into position.(See Detail at Right)BDCS10 3/8 -16UN C 25m m10 3/8 -16UN C 25m m13 1/2 -13UN C 32m m363 454998HORIZONTALOPTIONAL MOUNT INSTALLATIONSWelded in positionBolted on positionHeld in placeby Friction PadTYPE SLR RATINGSRatioRatioOD/OHKx/Ky0.50 - 0.90 0.74 - 1.25SizeSLR-A-45Illustration shows a SLR-4A (4 springs). SLR-A has 1 spring and SLR- SLR-A-752A has 2 springs. All springs have additional travel to solid equal toSLR-A-12550% of the rated deflection.SLR-A-200Solid Spring Height Free Height minus 1.5 times Rated Deflection.SLR-A-310Housing load ratings in G’s are based on tests with bolted connections SLR-A-400to steel top and bottom. SLR housings require uniform support under SLR-A-510entire base plate.SLR-A-625Horizontal and Vertical plotted Ratings are California OSHPD approved SLR-2A-620values having the OSHPD Anchorage Preapproval Number OPA-0195. SLR-2A-800SLR-2A-1020Testing and calculations were performed to meet OSHPD criteria.SLR-2A-1250To use approved OSHPD rated load curves:1. Calculate Vertical and Horizontal Forces on mounting includingSLR-4A-1240translations and overturning moments.SLR-4A-16002. Plot Horizontal Load vs Vertical Load.SLR-4A-2040The point must fall within the area below the OSHPD curve.SLR-4A-2500Rated Rated SpringCapacity Defl. Constant(kg) (mm) 5227242528924253611322544PLAN VIEW OF MOUNT LOCATIONSTAG :Max.Horiz.SpringStaticColor G RatingBlue17.80Orange .60Green1.30Red1.00White0.80SPECIFIED DEFLECTIONUNIT :Click with mouse for each location 1:6 :2:7 :3:8 :4:9 :5:10 :Sets Required:FORM S-227metric09/2008DWN:CHKD:DATE:DWG. No.
MASON M.I. DWG. NO. SLR 2” (51mm) Deflection C2 SERIES SPRING MOUNTS MASON INDUSTRIES, Inc. Manufacturers of Vibration Control Products 350 Rabro Drive Hauppauge, NY 11788 631/348-0282 FAX 631/348-0279 Info@Mason-Ind.com 2101
Manual 35mm SLR Camera Controls A single-lens reflex camera(SLR) typically uses a mirror and prism system (hence "reflex", from the mirror's reflection) that permits the photographer to view through the lens and see exactly what will be captured, contrary to viewfinder cameras where the image could be significantly different from what will be captured. Single Lens Reflex. 35mm SLR Camera .
Not all Canon SLR cameras provide an ability to have live image preview in the software window. Canon SLR cameras having live image preview ability shall be set in “Auto” (P), “Exposition priority” (Tv), “Aperture priorirty” (Av), or “Manual” (M) mode. The live image preview will not be displayed in the software window if Canon SLR camera is set in “Full Auto” mode .
The Bijur Delimon SureFire SLR centralized lubrication system is a reliable SLR system that consists of three basic elements: SureFire SLR lubricator pump – stores and pumps lubricant Resistance fi ttings – allows a
mason industries seismic applications 3s slr-mt restrained twin sphere air spring mount with specified frequency. must be secured with sab anchors specification 9 3 air spring leveling valves (piping not shown) controls 2 end air springs corner valve each side controls corner air springs
at George Mason University A Teacher’s Manual Osher Lifelong Learning Institute Tallwood, 4210 Roberts Road Fairfax, VA 22032-1028 Mason MSN 5C1 Phone: 703-503-3384 Fax: 703-503-2832 Email: olli@gmu.edu Web site: www.olli.gmu.edu Affiliated with George Mason University Sites at Tallwood in Fairfax, Reston, and Mason’s
Keystone Mason Jars, Part II Mason Fruit Jar Co. and Keystone Users Bill Lockhart, Beau Schriever, Bill Lindsey, and Carol Serr In his lifetime, John Landis Mason received or was assigned 40 patents, including the most famous fruit jar patent of
For a general idea of George Mason’s Admission Standards, below is a blurb by Allen Grove, College Admissions Expert, from the website “About.Com” Discussion of George Mason's Admissions Standards: Over a third of applicants to George Mason University don't get in. Successful app
uqc103s/UFCE47-20-1 PHP-mySQL 7 Why PHP and mySQL „ MySQL is a key part of LAMP (Linux, Apache, MySQL, PHP / Perl / Python), a fast growing open source enterprise software stack. More and more companies are using LAMP as an alternative to expensive proprietary software stacks because of its lower cost and freedom from lock-in.
