2 In 1 Play Yard & Safety Gate

2 in 1Play Yard & Safety GateOWNER’S MANUAL MODEL:1360, 1360DS READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE.www.regalo-baby.comRegalo International, LLC.3200 Corporate Center Drive, Suite 100 / Burnsville, MN 55306, USA866.272.5274 (U.S. only) or 952.435.1080Made in China

Before Using ProductRead and follow all instructions carefully to ensure that your gate is properlyinstalled. Improper installation could result in the gate becoming unstable ordislodged from the doorway. Always make sure the gate panels are securelyattached before using. The safety of your child is your responsibility. Please keepthese instructions for your reference.IMPORTANT The four mounting brackets must be used in securing the gate to the wall.These brackets prevent the gate from dislodging from its opening andbecoming unstable. If hardware mounting to a surface other than drywall or wood, pleaseconsult with a professional about installation. The maximum width of this gate is 192 inches.2English

WARNING To prevent serious injury or death, securelyinstall gate or enclosure and use according tomanufacturer's instructions. Children have died or been seriously injured whengates are not securely installed. ALWAYS install anduse gate/enclosures as directed using all requiredparts. STOP using when a child can climb over ordislodge the gate. Use only with the locking/latching mechanismsecurely engaged. To prevent falls, NEVER use at top of stairs. NEVER use to keep child away from pool. Intended for use with children between 6 and 24months. Always ensure the gate is resting against the floorbefore beginning installation. This product will not necessarily prevent allaccidents. NEVER leave child unattended. Check the gate regularly to see if all the hardwareand mountings are tightened. Do not use if any components are missing ordamaged. Adult assembly required.English3

Before Y AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF REGALO INTERNATIONAL/ CARLSON PET PRODUCTS. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THE WRITTENPERMISSION OF REGALO INTERNATIONAL /CARLSON PET PRODUCTS IS PROHIBITED.在此图中所载的信息为 REGALOINTERNATIONAL/CARLSON PET 再生产而并无REGALO INTERNATIONAL/CARLSON PETPRODUCTS 的书面许可是禁止的。D7E6543UNITS : INCHES.XXX : .005.XX : .01.X : .1ANGLES : 2 3200 CORPORATE CENTER DRIVEBURNSVILLE, MN 553063RD ANGLEPROJECTIONDRAFTERDESIGNERFINISHABSSEE NOTESFPLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:A Play Yard Gate Frame (6 Panels)B Wall Mounting Bracket (4 – Attached to Gate Frame)C Gate Connector (4)D 1" Wall Mounting Screws (8) (requires a Phillips/cross-head screwdriver)E Small Threaded Gate Cap (1)F Tall Gate Cap (2)4English2ATITLE:UNLESS OTHERWISE SPECIFIEDDIMENSIONS & TOLERANCES PER ASME Y14.5-2009MATERIALDO NOT SCALE DRAWING8ENG APPR.MFG APPR.Q.A.NAMEDATEMATT WILLMS12/27/2016MOUNT, WALL,GATE SIDESIZE DWG. NO.D300112-001SCALE: 1:1SHEET 1 OF 21REV0.00

Option A: Installing Your Gate Between Two WallsSTEP 1Unfold the gate frameat each pivoting joint byloosening each cap.876DSTEP 2Determine the size of your opening. If you need to remove panels from yourgate simply unhook the upper and lower knobs between the panels. If you areC panels, hook together opposite panel ends; one panel with the maleaddingside and one panel with the female side. Check to make sure all the panels aresecurely locked.BEnglish5

7654321STEP 3Attach two gate connectors to one of the free ends of your gate at thespecified mounting locations shown below. The placement of the gateconnectors will determine where your gate is attached to the wall. Repeat stepfor the other free end of the TIONSMOUNTINGLOCATIONSLOCATIONSPROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF REGALO INTERNATIONAL/ CARLSON PET PRODUCTS. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THE WRITTENPERMISSION OF REGALO INTERNATIONAL /CARLSON PET PRODUCTS IS PROHIBITED.在此图中所载的信息为 REGALOINTERNATIONAL/CARLSON PET 再生产而并无REGALO INTERNATIONAL/CARLSON PETPRODUCTS 的书面许可是禁止的。TITLE:UNLESS OTHERWISE SPECIFIEDDIMENSIONS & TOLERANCES PER ASME Y14.5-2009UNITS : INCHES.XXX : .005.XX : .01.X : .1ANGLES : 2 3200 CORPORATE CENTER DRIVEBURNSVILLE, MN 553063RD ANGLEPROJECTION6548With the gate connectors76attached to the gate, attachthe wall mounting bracketsto the gate connectors.Repeat step for oppositeend of gate.6EnglishPROPRIETARY AND CONFIDENTIALGATE CONNECTOR在此图中所载的信息为 REGALOINTERNATIONAL/CARLSON PET 再生产而并无REGALO INTERNATIONAL/CARLSON PETPRODUCTS 的书面许可是禁止的。DINSTALLSCALE: 1:4SHEE1TITLE:UNLESS OTHERWISE SPECIFIEDPLASTIC PADIMENSIONS & TOLERANCES PER ASME Y14.5-2009UNITS : INCHES.XXX : .005.XX : .01.X : .1ANGLES : 2 3200 CORPORATE CENTER DRIVEBURNSVILLE, MN 55306NAME3RD ANGLEPROJECTIONDRAFTERDESIGNERMATERIALPP HomopolymerFINISHENG APPR.MFG APPR.DO NOT SCALE DRAWING4SIZE DWG. NO.Q.A.2THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF REGALO INTERNATIONAL/ CARLSON PET PRODUCTS. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THE WRITTENPERMISSION OF REGALO INTERNATIONAL /CARLSON PET PRODUCTS IS PROHIBITED.512/27/2016MFG APPR.3STEP 4DATEMATT WILLMSENG APPR.FINISHDO NOT SCALE DRAWING7NAMEDRAFTERDESIGNERMATERIAL32WALL MOUNTINGBRACKETQ.A.MDATE12/27/2016SIZE DWG. NO.D300056-001SCALE: 1:4SHEET 1 O1

STEP 5Use a Phillips/cross-head screwdriver to fix thewall mounting bracket to the wall. Repeat for allfour brackets.STEP 6Rotate wall mountingbracket to the lockedposition.Repeat step for remainingwall mounting brackets.DEIFICEPS ESIWREHTO SSELNU9002-5.41Y EMSA REP SECNARELOT & SNOISNEMIDSEHCNI : STINU500. : XXX.10. : XX.1. : X. 2 : SELGNAC ETAROPROC 0023M ,ELLIVSNRUBEMANMELGNA DR3NOITCEJORPRETFARDRENGISEDLAIRETAM.RPPA GNEHSINIF.RPPA GFM.A.QLAITNEDIFNOC DNA YRATEIRPORPGNIWARD SIHT NI DENIATNOC NOITAMROFNI EHTLANOITANRETNI OLAGER FO YTREPORP ELOS EHT SINOITCUDORPER YNA .STCUDORP TEP NOSLRAC /NETTIRW EHT TUOHTIW ELOHW A SA RO TRAP NI/ LANOITANRETNI OLAGER FO NOISSIMREP.DETIBIHORP SI STCUDORP TEP NOSLRACOLAGER 为息信的载所中图此在STCUDORP TEP �再体整个一或分部何任TEP NOSLRAC/LANOITANRETNI OLAGER。的止禁是可许面书的 STCUDORPGNIWARD ELACS TON OD23456STEP 7Arrange the panels to your desired configuration.English7

NOTE: When putting your gate away you can remove the gate panels withoutremoving the wall mounting brackets.STEP 8To remove your gate,rotate all wall mountingbrackets to the unlockedposition. You are nowable to detach the gateconnectors from the wallmounting brackets.8765432NOTE: This gate is designed to fit minimum width openings 36 inches wide tomaximum width openings 192 inches wide.36 INCHESPROPRIETARY AND CONFIDENTIAL8THE INFORMATION CONTAINED IN THIS DRAWINGIS THE SOLE PROPERTY OF REGALO INTERNATIONAL/ CARLSON PET PRODUCTS. ANY REPRODUCTIONIN PART OR AS A WHOLE WITHOUT THE WRITTENPERMISSION OF REGALO INTERNATIONAL /CARLSON PET PRODUCTS IS PROHIBITED.English在此图中所载的信息为 REGALOINTERNATIONAL/CARLSON PET 再生产而并无REGALO INTERNATIONAL/CARLSON PETPRODUCTS 的书面许可是禁止的。76543PLASTUNITS : INCHES.XXX : .005.XX : .01.X : .1ANGLES : 2 3200 CORPORATE CENTER DRIVEBURNSVILLE, MN 55306NAME3RD ANGLEPROJECTIONDRAFTERDESIGNERMATERIALPP HomopolymerFINISHENG APPR.MFG APPR.DO NOT SCALE DRAWING8TITLE:UNLESS OTHERWISE SPECIFIEDDIMENSIONS & TOLERANCES PER ASME Y14.5-20092Q.A.MDATE12/27/2016SIZE DWG.D300SCALE: 1:4

Option B: Installing Your Gate as a Freestanding EnclosureSTEP 1Unfold the gate frame at eachpivoting joint by loosening eachcap.876D7654STEP 2CPositionthe play yard into your desired configuration, then join the free ends ofthe play yard together at the plastic joints.BEnglish9

STEP 3Tighten the lockingknobs to secure yourplay yard into yourdesired configuration.NOTE: When adding or removing additional panel units to the configuration,panels must be added or subtracted in sets of two for the freestandingenclosure to function properly.10English

TO FOLD YOUR PLAY GATESTEP 1: Detach two of the gate panels by unhooking the upper and lower knobs.STEP 2: You will now be able to pull the play yard apart.STEP 3: Fold and put away.CARE AND MAINTENANCEPeriodically check the gate for signs of damage, wear, or missing components.Do not use if any part is missing, worn or damaged. Check the gate regularly toensure all the hardware and mountings are tightened. Do not use abrasivecleaners or bleach. Clean by sponging with warm water and a mild detergent.90 DAYS LIMITED WARRANTYIf, during the first 90 days after consumer purchase of the item, under reasonableand non-commercial use and conditions of maintenance, it fails while owned bythe original purchaser because of the quality of materials or workmanship of finishand assembly, Regalo International, LLC, will replace or repair it at Regalo’s option.PROOF OF PURCHASE REQUIRED.English11

www.regalo-baby.comRegalo International, LLC.3200 Corporate Center Drive, Suite 100Burnsville, MN 55306, USA866.272.5274 (U.S. only) or 952.435.108020180427ET

dimensions & tolerances per asme y14.5-2009 proprietary and confidential the information contained in this drawing is the sole property of regalo international / carlson pet products. any reproduction in part or as a whole without the written permission of regalo internati