Hardware - Lift-All
HardwareCHAIN SLING HARDWAREEye Cradle Grab Hook – Code GB For use with both G80 & G100 chain.Unique cradle grab design.Quenched and tempered alloy steel.100% proof-tested.Fatigue rated.Durable powder-coated finish.Design factor 84.311.888.093.1220.9801-1/472,3001G8ECGH114G8CGH 5.388.501.5015.561.562.505.502.2510.53.5040 Note: 1-1/4" is a Non-Cradle type. Also, Non-Cradle Grab Hooks are also available for other sizes upon request.Foundry Hook – Code F For use with both G80 & G100 chain.Throat opening to 6 inches.Quenched and tempered alloy steel.100% proof-tested.Fatigue rated.Durable powder-coated finish.Design factor 58.4Rated Capacity also referred to as “Working Load Limit”.1*138WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.
HardwareCHAIN SLING HARDWARELatchlok Eye Hooks – Code L Large eye design for use with G80 andG100 chain, wire rope and syntheticmaterial.100% proof-tested.Positive locking hook.Meets ASTM A952 standards.Durable powder-coated finish.Design factor 4:1. 31.8510.371.9716.001Dimensions (inches)Note: For welded 7/32" chain sling use 9/32" eye latchlok hook.Chain Sling Eye Hook – Code S For use with both G80 andG100 chain.Quenced and tempered alloysteel.Fatigue rated.100% proof-tested.Durable powder-coated finishDesign factor 4:1.Shown with optional latches.GGradeChainSize(in.)1007/32Dimensions -1/4 72,300 114G8ESH 5.31 11.56 4.66 17.00 1.50 2.62 4.64 2.31 11.50 3.88 4.25 3.89Note: Latches are not included on domestic hooks. If latches are required, you must specify latches when ordering.1Rated Capacity also referred to as “Working Load Limit”.3.4147.00*WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.139Hardware100100
HardwareCHAIN SLING HARDWAREClevis Cradle Grab Hook – Code G For use with both G80 and G100 chain.Unique cradle grab design.100% proof-tested.Quenched and tempered alloy steel.Fatigue rated.Durable powder-coated finish.Replacement pin available.Design factor 911.895.3010.50Clevis Sling Hook – Code S OFor use with both G80 andG100 chain.Unique cradle grab design.100% proof-tested.Quenched and temperedalloy steel.Fatigue rated.Durable powder-coated finish.Replacement pin available.Design factor 4:1. Shown with optional 0.942.092.552.517.7411.22* Latches are not included. If latches are required, you must specify when ordering.1Rated Capacity also referred to as “Working Load Limit”.*140WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.
HardwareCHAIN SLING HARDWAREOblong Master Link – Code O For use with both G80 and G100 chain,web bridle and Tuflex bridle slings.100% proof-tested.May be used for mechanical and weldedsling assemblies.Durable powder-coated finish.Design factor 4:1. Standard Oblong for Size andMaster Link tion of Chain tEach (lbs.)Quad13/323.001.501332DOL7/327/32 4DOL3/83/89/329/322.518.004.001DOL1/2 or 5/81/23/83/85.81-1/48.754 .38114DOL3/45/81/21/29.21-1/210.505 4G8OL 1-1/411542-3/416.009.00234G8OL 1-1/41-1/485Plate Hooks – G80 Made with alloy steel.May be used for mechanical and weldedsling assemblies.Design factor 4:1.Ratings are per hook.Do not use at angle other than 60 from horizontal. .0065.0HardwareChainSize(in.) Never use plate hooks on a quad sling. Do not attempt to lift using only one plate hook.Rated Capacity also referred to as “Working Load Limit”.1*WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.141
HardwareCHAIN SLING HARDWAREMechanical Coupling Links Used for overhead lifting slings to connectchain branches to the master link and thehook to attachments.Constructed of drop-forged alloy steel.Can be used with G80 and G100 chain.Must be matched to chain size.Do not use for chain repair or splicing.Meets ASTM A952 standards.Design factor 4:1. H1.571.536.812.172.987.042.6716.61S-Hooks – G80Hardware 1Made from alloy material.100% proof-tested.Durable powder-coated finish.Working Load Limit is embossed on hooks.Design factor 06.0019.50Rated Capacity also referred to as “Working Load Limit”.*142Dimensions(in.)WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.
HardwareFOUNDRY SORTING HOOKS & J-HOOKSWelded alloy steel hooks are heat-treated with a shot blast finish, proof-tested and certified.Standard Foundry Sorting HooksFoundry Sorting HooksCAEChain SizeEye 1.255.004.000.506000BShort Foundry Sorting rtPartPartNumber Number NumberCBDSTYLE E A3.00B1Flat Tip J-HooksSTYLE BERatedCapacity*(lbs.)AStandard J-HooksAEChain SizeEye FitsMechanicalCouplerPartNumber* Rated Capacity based on bearing to bearing pull.1Tip load capacity averages 30% of bearing to bearing rating.Rated Capacity also referred to as “Working Load Limit”.143
WIRE ROPE SLING HARDWAREHardwareScrew Pin Anchor ShacklesShackleSizeD(in.)1Rated Capacity*(tons)Dimensions e: Standard capacities and dimensions shown, but may vary depending on source of supply. Specify required capacity if critical.1Rated Capacity also referred to as “Working Load Limit”.*144 Carbon Shackle, Alloy Pin. Specification: RR-C-271F. Heat treated and tempered. Type 4A, Grade A, Class 2. Hot dip galvanized. Design Factor 5:1.WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.
HardwareWIRE ROPE SLING HARDWARERigging Eye Hooks Drop forged alloy steel. Load rating marked on each hookbody. Pre-drilled latch tab allows addition ofheavy-duty latch. Design factor 5:1.AlloyCarbonDimension 0–5.755.7532.254.1223.725.69–May also be used on Tuflex Bridle Roundslings and Web Bridle Slings.Sorting Hooks Quenched and tempered alloy steel. Long tapered point designed for easy grab in rings, pear links, eye bolts orlifting holes.Durable powder-coated finish.Do not load last 1" of the tip.Design factor 5:1. WLL at tip: WLL at bowl:2.0-Ton7.5-TonHardwareDimensions (in.)Part Number2SORT 1 ABCDEFGHIMWeight For Handle, add 'H' to part number (2SORTH).Rated Capacity also referred to as “Working Load Limit”.*WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.145
WIRE ROPE SLING HARDWAREHardwareAlloy Oblong Master Link Drop forged through 1". Larger sizes welded. Design factor 5:1.RatedCapacity*Hardware1Dimensions* (in.)PartNumberWeightEach(lbs.)AOblong tonslbs.3.06,1006.6Rated Capacity also referred to as “Working Load Limit”.1*146WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.
HardwareWIRE ROPE SLING HARDWARELatchlok Eye Hooks Heavy-duty latch with lock preventsaccidental opening. Drop forged alloy steel. Durable powder-coated finish. Design factor 5:1.Rated CapacityDimensions (in.)1PartNumberTONSLBSAMPDFHKWeightEach 8516.00Swivel Latchlok Hooks with Bushings Hook swivels beneath the eye. Heavy-duty latch with lock preventsaccidental opening. Durable powder-coated finish. Positive locking hook. Design factor 5:1.Rated CapacityDimensions eightEach(lbs.)3.54.810.617.0HardwareUSING LATCHLOK HOOKS SAFELY Do not apply load unless latch and hook are completely closed and locked. Make certain that the latch does not support any part of the the load. When lifting, make certain that the load is firmly seated in the base (bowl) of the hook. Inpsect hook and latch periodically. If the hook or latch is damaged or if the latch fails tointerlock with the tip, the hook should be removed from service. Do not exceed the working load limit. Do not use if the hook is visibly distorted, damaged, or worn. Keep body and other objects clear of the latch when closing to avoid the pinch point. Do not side load or tip load hook. User should be properly trained and understand safe rigging practices.Rated Capacity also referred to as “Working Load Limit”.1147
WIRE ROPE SLING HARDWAREHardwareSwivel Rigging Eye Hooks Pre-drilled for latches.Heat-treated, quenched and tempered.Design factor 5:1.Shown with optional latch.RatedCap.*(tons)Dimensions .193.003.502.6921.1816.681.502.743.0551.80Sliding Choker HooksHardware Speeds rigging time of bundled loads. Reduces sling wear when used with thimbles. When using onmulti-part slings, contact Lift-All for additional information. Saddle is rounded to minimize wear. Hook opening is large enough to take a galvanized plow steelthimble the same size as the hook 3/441.001.001.133.130.691.254.696.444.57/8 & 17.21.251.251.254.250.881.566.068.13101-1/8 & bs.)1.3Rated Capacity also referred to as “Working Load Limit”.*148Dimension(in.)HookNumber(Rope Dia.)WARNINGDo not exceed rated capacities. Sling capacity decreases as the angle from horizontaldecreases. Do not use slings at angles of less than 30 . Refer to the Effect of Angle chartfound in the HELP section of this catalog.
Hardware 138 Hardware CHAIN SLING HARDWARE Note: 1-1/4" is a Non-Cradle type.Also, Non-Cradle Grab Hooks are also available for other sizes upon request. Grade Chain Size (in.) 1Rated Cap.*
Jan 03, 2018 · flying squirrel moose cut moose bobcat glades runner up porcupine run deer round-a-bout cub carpet low road bobcat chute bus lot lot 3 lot 2 lot 1 lot 4 lot 5 lift e / face lift lift a / mixing bowl lift e / face lift lift b / bear lift lift k / cloudsplitter gondola lift h / mountain run lift i / freeway lift lift g / little whiteface lift g .
Medium-Lift Rocket A MASS LIMIT Medium-Lift Rocket A 100 125 This rocket can lift a mission that has up to 125 mass units. 3 PROS: Lifts large missions with more science tools. CONS: Costs more than Light-Lift Rockets. Medium risk: works 4 times out 6 MASS LIMIT Light-Lift Rocket II 75 90
Dr. David Timm, P.E. Department of Civil Engineering Auburn University Easy-To-Use Perpetual Pavement Design Software. . Lift 2 Lift 3 Lift 4 Lift 1 Lift 2 Lift 3 Lift 4 Lift 5 Aggregate Base (Track Fill) Subgrade (A-7-6 Soil) Rich Bottom Layer PG 64-22 Dense Graded HMA PG 64-22 Dense Graded HMA
Always keep area around lift free of tools, debris, grease and oil. Never overload lift. Capacity of lift is shown on nameplate affixed to the lift. Do Not stand in front of the vehicle while it is being positioned in lift bay. Do Not hit or run over lift arms or adapters. This could damage lift or vehicle.
RADIAL-LIFT & VERTICAL-LIFT LOADING OR LIFTING - WE HAVE THE MACHINE FOR YOU RADIAL-LIFT and VERTICAL-LIFT RADIAL LIFT Offers enhanced performance in excavating, grading and digging below grade applications. Due to the radial lift path, the maximum reach is greater at the middle of the lift height. SINGLE PIN DESIGN Provides superior durability
A - Simple Gas Lift System, B-Continuous Gas Lift, C- Intermittent Gas Lift Fig.1 Gas Lift Types (Ibrahim, 2007)(Salahshoor, Zakeri and Haghighat Sefat, 2013) 2.1 Advantages of Gas Lift Gas Lift is most preferred due to following advantages ('Ga if C i -flow gas lift Intermittent-flow gas if', 2018). i- Maximum liquid production
power tailgate. Be prepared BEFORE the truck arrives! Pro Park 9 Plus 4-post lift in truck. Pro Park 9 Plus 4-post lift on power tailgate. Pro Park 9 Plus 4-post lift pulled down from tailgate with fork lift. Pro Park 9 Plus 4-post lift pulled down from tailgate with fork lift. Pro Park 9 Plus 4-post lift lowered down with tailgate.File Size: 241KB
The plan is available in both Lite and Standard versions. The Lift Plan Details panel identifies the parties involved in the lift and confirm: - the date and time of the lift - the location of the lift - a description of the lift Lift Plan Details The Hazard Checks panel lists common hazards associated to crane operation and load lifting. The
