SmartLink M-ATA Micro-Analog Telephone Adapter User
SmartLink M-ATAMicro-Analog Telephone AdapterUser ManualSales Office: 1 (301) 975-1000Technical Support: 1 (301) 975-1007E-mail: support@patton.comWWW: www.patton.comPart Number: 07MSLMATA-GS, Rev. FRevised: February 28, 2017
Patton Electronics Company, Inc.7622 Rickenbacker DriveGaithersburg, MD 20879 USATel: 1 (301) 975-1000Fax: 1 (301) 869-9293Support: 1 (301) 975-1007Web: www.patton.comE-mail: support@patton.comTrademark StatementThe terms SmartLink, SmartNode, SmartWare, and SmartView are trademarks of Patton Electronics Company. All other trademarks presented in this document are theproperty of their respective owners.Copyright 2014–2017, Patton Electronics Company. All rights reserved.The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.Warranty InformationPatton Electronics warrants all SmartLink M-ATA components to be free from defects,and will—at our option—repair or replace the product should it fail within one yearfrom the first date of the shipment.This warranty is limited to defects in workmanship or materials, and does not covercustomer damage, abuse or unauthorized modification. If the product fails to performas warranted, your sole recourse shall be repair or replacement as described above.Under no condition shall Patton Electronics be liable for any damages incurred by theuse of this product. These damages include, but are not limited to, the following: lostprofits, lost savings and incidental or consequential damages arising from the use of orinability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemedan acceptance of these terms by the user.Firmware Revision InformationThis version of the User Manual is based on firmware revision (1026).
Summary Table of Contents1 General information .172 SmartLink installation.193 Home.224 Network—LAN .265 Telephony .346 System.527 Documentation .738 Logout.759 Contacting Patton for assistance.77A Compliance information .82B Specifications .86C Dial plans .96D Calling Features .99E Voice prompt configuration .1013
Table of ContentsSummary Table of Contents .3Table of Contents .4List of Figures .12List of Tables .13About this guide .14Audience. 14Structure. 14Precautions . 15Safety when working with electricity .15General observations .16Typographical conventions used in this document. 16General conventions .161 General information .17SmartLink M-ATA overview .182 SmartLink installation.19Installing the M-ATA .20Resetting the M-ATA to factory default .213 Home.22System information .23System Uptime .23LAN IP Address .23MAC address .23Application Version .23Config Date .23Security .24Application Code Version .24Downloader Code Version .24System Status.25SIP Messages Sent .25SIP Messages Received .25SIP Bytes Sent .25SIP Bytes Received .25RTP Packets Sent .25RTP Packets Received .25RTP Bytes Sent .25RTP Bytes Received .254 Network—LAN .26Status .27Interface Status .274
SmartLink M-ATA Getting Started GuideTable of ContentsEnabled .27Service .27Interface Status .27Network Settings .27Dynamic IP Assignment .27IP address .28MAC address .28Subnet Mask .28Default Gateway .28Domain name .28DNS address .28DynDNS address .28VLAN .28Priority Tag .28Settings.29Internet Configuration .29Obtain LAN configuration dynamically .29Specify fixed LAN configuration .29WAN PPPoE Configuration .30Enable PPPoE .30Authentication .30Settings .30Idle Timeout .30Echo Timeout .30Echo Count .30Service Name .30AC Name .30Dynamic DNS .30Configuring Dynamic DNS .31MAC Spoofing Configuration .31WAN MAC Address (Spoofed) .31VLAN Configuration .31VLAN Tag (IEEE 802.1q) .32Priority Tag (IEEE 802.1q) .32Saving your work .32ToS/DiffServ .33Saving your work .335 Telephony .34VoIP Status .37VoIP Server Registration Status .37Current Server .37Domain .37Base RTP Port .375
SmartLink M-ATA Getting Started GuideTable of ContentsPhone Line Status .37Registration Status .37User Name .38Caller ID Setting .38Subscribed for Voicemail .38Messages waiting .38SIP .39SIP Configuration .39SIP Server Settings .39Gateway Settings .40Dial Plan .40SIP Extensions .40Support PRACK method .40Encode SIP URI with user parameter .40Send INVITE with Timer header .40Call Hold using C 0.0.0.0 .40Send NOTIFY .40RTP Telephone Event Configuration .41VoIP VLAN Configuration .41SIP Parameters .41Hook Flash MIME Type .41SIP Timer Values (milliseconds) .41SIP T1 .41SIP T2 .41SIP T4 .42RTP Parameters .42NAT Traversal .42Outbound Proxy IP .42Outbound Proxy Port .42UPnP .42NONE .42Saving your work .42Audio/CODEC Configuration.43CODECS .43Packetization .43Jitter Buffer .43FAX without T.38 (Use G.711 fax) .43Saving your work .44Phone 1 .45User Information .45Phone Number .45User Name .45Port .45CallerID Name .466
SmartLink M-ATA Getting Started GuideTable of ContentsPassword .46Supplementary Service Activation .46Call Forward All .46Selective Call Forward .46Three-Way Conferencing .46Incoming Call Block .46Distinctive Ring .46Call Transfer .46Dialing by IP Address .47Speed Dial .47Message Waiting Indicator .47Call Forward on Busy .47Conditional Call Forward .47Call Waiting .47Anonymous Call Reject .47Caller ID .47Call Return .47Do Not Disturb .47Self Caller ID Block .47Outgoing Call Block .47Dial Out Type .48Dial Out Type .48Hot Line Number .48Warm Line Number .48Call Forward Settings .48Cfwd All Dest .48Cfwd Busy Dest .48Selective Call Forward Settings .49Incoming caller #1–8 .49Forward destination #1–8 .49Incoming Call Block .49Block Caller ID .49Outgoing Call Block .49Digit Pattern .49HTTP Digest Setting .50Saving your work .50Speed Dial .51Line 1 Speed Dial Settings .51Speed Di
SmartLink M-ATA Micro-Analog Telephone Adapter User Manual Sales Office: 1 (301) 975-1000 Technical Support: 1 (301) 975-1007 E-mail: support@patton.com WWW: www.patton.com Par
Note The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly stated. Default Boot Load Behavior Before configuring the Cisco ATA, you need to know how the default Cisco ATA boot load process works.
Cisco ATA 191 Multiplatform Analog Telephone Adapter The Cisco ATA 191 Multiplatform Analog Telephone Adapter is a 2-port handset-to-Ethernet adapter that brings traditional analog devices into the IP world. Product Overview The Cisco ATA 191 Multiplatform Analog Telephone Adapter turns traditional telephone, fax, and overhead paging
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware First Published: 2018-02-05 Americas Headquarters Cisco Systems, Inc.
3 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for SIP (version 3.0) OL-4654-01 CONTENTS Preface 13 Overview 13 Audience 13 Organization 14 Conventions 14 Related Documentation 18 Obtaining Documentation 18 World Wide Web 18 Documentation CD-ROM 19 Ordering Documentation 19 Documentation Feedback 19
Contents vi Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SIP) OL-3410-01 Parameters for Configuration Method 5-4 UseTFTP 5-4 TftpURL 5-5 CfgInterval 5-5 EncryptKey 5-6 Network Parameters 5-6 DHCP 5-7 StaticIp 5-7 StaticRoute 5-7 StaticNetMask 5-8 Account Information Parameters 5-8 UID0 5-9 PWD0 5-9 UID1 5-9 PWD1 5
ATA (analogais telefona adapters) ANALOGO SIGNĀLU PĀRVEIDOTĀJI (faksiem un analogajiem telefoniem) Cisco SPA122, ATA ar diviem portiem 50.00 33.60 97.00 188.00 Grandstream HT502, ATA ar diviem portiem Grandstream GXW4004, ATA ar četriem portiem Grandstream GXW4008, ATA ar astoņiem portiem IP KONFERENČU IEKĀRTAS
SmartLink 4020 Analog VoIP SoHo Router User Manual Sales Office: 1 (301) 975-1000 Technical Support: 1 (301) 975-1007 E-mail: support@patton.com WWW: www.patton.com Part Number: 07MSL4020-GS, Rev. G Revised: June 21, 2012 Important This is a Class B device and is intended for use in a light industrial or residential environment.
ALBERT WOODFOX CIVIL ACTION (DOC# 72148) VERSUS BURL CAIN, ET AL NO. 06-789-D-M2 MAGISTRATE JUDGE’S REPORT This matter is before the Court on the original and amended petitions for writ of habeas corpus (R. Doc. 1 and 12) filed by petitioner, Albert Woodfox (“Woodfox”). The State has filed an answer and a memorandum in support of answer (R. Docs. 21 and 22), to which Woodfox has filed a .
