OWNER'S MANUAL LED LCD Monitor (LED Monitor*)

OWNER'S MANUALLED LCD Monitor(LED Monitor*)*LG LED Monitors are LCD Monitors with LED Backlighting.Please read this manual carefully before operatingyour set and retain it for future reference.LED LCD MONITOR MODEL22MK600M24MK600M27MK600M27MK60TMwww.lg.com

--3ASSEMBLING AND PREPARING--4--Product Components----------------------------Supported Drivers and Software-------------Component and Button Description-------How to Use the Joystick ButtonInput Connector--Moving and Lifting the Monitor----------------Setting up the Monitor set -------------------Assembling the StandMounting on a tableMounting on a wallUSING THE MONITOR SET-------4568914--Connecting to a PC----------------------------14D-SUB connectionHDMI connection--Connecting to AV Devices-------------------15HDMI connection--Connecting Peripherals-----------------------15Connecting HeadphonesCUSTOMIZING SETTINGS-------16TROUBLESHOOTING-------------21 SPECIFICATIONS---------------22--Preset Modes (Resolution)------------------25

3Each model has different licenses. Visit www.lg.com for more information on the license.The terms HDMI and HDMI High-Definition Multimedia Interface, and theHDMI Logo are trademarks or registered trademarks of HDMI LicensingAdministrator, Inc. in the United States and other countries.The following content is only applied to the monitor which is sold in Europe market and which needs tomeet the ErP Directive:* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is noadjustment to display.* To disable this setting, change the option to Off' in the OSD "Automatic Standby" menu.ENGENGLISHLICENSE

4ASSEMBLING AND PREPARINGENGLISHENGProduct ComponentsPlease check whether all the components are included in the box before using the product. If there aremissing components, contact the retail store where you purchased the product. Note that the product andcomponents may look different from those shown here.CD(Owner's Manual) /Card( Depending on the country )D-SUB Cable( Depending on the country )HDMI Cable( Depending on the country )orPower CordAC-DC Adapter( Depending on the country )Stand BodyAC-DC Adapter( Depending on the country )Stand BaseScrew Cover22MK600M27MK600M24MK600M27MK60TM3 Screws2 Screws

5CAUTIONNOTENote that the components may look different from those shown here.yyWithout prior notice, all information and specifications in this manual are subject to change to imyyprove the performance of the product.To purchase optional accessories, visit an electronics store or online shopping site or contact theyyretail store where you purchased the product.Supported Drivers and SoftwareCheck the drivers and software supported by your product and refer to the manuals on the CD enclosed inthe product package.Drivers and SoftwareInstallation Priority22MK600M24MK600M27MK600M27MK60TMMonitor DriverRecommendedOOnScreen ControlRecommendedORequired and Recommended: You can download and install the latest version from the enclosed CDyyor from the LGE website (www.lg.com) .Optional: You can download and install the latest version from the LGE website (www.lg.com) .yyENGENGLISHAlways use genuine components to ensure safety and product performance.yyThe product warranty will not cover damage or injury caused by the use of counterfeit components.yyIt is recommend that use the supplied components.yyIf you use generic cables not certified by LG, the screen may not display or there may be image noises.yy

6Component and Button DescriptionENGLISHENGJoystick ButtonHow to Use the Joystick ButtonYou can easily control the functions of the monitor by pressing the joystick button or moving it left/right withyour finger.Basic Functions / Power onPress the joystick button once with your finger to turn on themonitor.Power offPress and hold the joystick button once with your finger to turn offthe monitor.VolumeControlYou can control the volume by moving the joystick button left/right.(for HDMI only)NOTEThe joystick button is located at the bottom of the monitor.yy

7Input ConnectorENGENGLISHConnection panel

8Moving and Lifting the MonitorENGLISHENGWhen moving or lifting the monitor, follow theseinstructions to prevent the monitor from beingscratched or damaged and to ensure safe transportation regardless of its shape or size.CAUTIONAs far as possible, avoid touching the moniyytor screen. This may result in damage to thescreen or some of the pixels used to createimages.It is advisable to place the monitor in theyyoriginal box or packing material before attempting to move it.Before moving or lifting the monitor, disconyynect the power cord and all cables.Hold the top and bottom of the monitor frameyyfirmly. Do not hold the panel itself.If you use the monitor panel without theyystand base, its joystick button may causethe monitor to become unstable and fall,resulting in damage to the monitor or humaninjury. In addition, this may cause the joystickbutton to malfunction.When holding the monitor, the screen shouldyyface away from you to prevent it beingscratched.When moving the monitor, avoid any strongyyshock or vibrations to the product.When moving the monitor, keep it upright,yynever turn the monitor on its side or tilt itsideways.

9Setting up the Monitor set3Screw Cover1CAUTIONTo protect the screen from scratches, coveryythe surface with a soft cloth.422MK600M24MK600M2Stand BodyStand Body22MK600M24MK600MStand BaseENGENGLISHAssembling the Stand

10WARNINGENGLISHENG27MK600M27MK60TMTo avoid injury to the fingers and foot whenyyAssembling the Stand Body and Base, youshould hold the Base for better stability.Stand BodyStand BaseCAUTIONIllustrations in this document represent typicalyyprocedures, so they may look different fromthe actual product.Do not carry the monitor upside down by justyyholding the stand base. This may cause themonitor to fall off the stand and could result inpersonal injury.When lifting or moving the monitor, do notyytouch the monitor screen. The force appliedto the monitor screen may cause damage toit.Do not apply foreign substances (oils,yylubricants, etc.) to the screw parts whenassembling the product. (Doing so maydamage the product.)Applying excessive force when tighteningyyscrews may cause damage to the monitor.Damage caused in this way will not becovered by the product warranty.NOTEYou can disassemble the stand in the reverseyyorder of the assembly.

11Mounting on a tableposition on a table.Leave a 3.94 inches (minimum) space from thewall for proper ventilation.3.94 inches3.94 inches2 Connect the AC-DC Adapter and Power Cordto a wall outlet.ormonitor to turn on the monitor.CAUTIONUnplug the power cord prior to moving oryyinstalling the monitor. There is risk of electricshock.3.94 inches3.94 inches3 Press the joystick button on the bottom of theENGENGLISH1 Lift and tilt the Monitor set into its upright

1227MK600M 27MK60TMWARNINGENGLISHENGWhen you adjust the angle, do not hold the bottomof the Monitor set frame as shown on the followingillustration, as may injure your fingers.27MK600M 27MK60TM515The angle of the screen can be adjusted forwardor backward from -5 to 15 for a comfortableviewing experience.5Do not touch or press the screen when adjustingthe angle of the monitor.Front15RearUsing the Kensington security systemDo not hold this set like below picture.Monitorscreen can detach from stand base and injure yourbody.The Kensington security system connector islocated at the back of the Monitor set. For moreinformation of installation and using, refer to themanual supplied with the Kensington securitysystem or visit http://www.kensington.com .Connect the Kensington security system cablebetween the Monitor set and a table.NOTE22MK600M 24MK600MThe angle of the screen can be adjusted forwardor backward from -2 to 15 for a comfortableviewing experience.21522MK600M 24MK600M2Front15NOTERearThe Kensington security system is optional.yyYou can obtain it from most electronics stores.

13Wall Mount (A x B)yyMounting on a wall3.94 inches3.94 inches3.94 inches3.94 inchesIf you intend to mount the Monitor set to a wall,attach Wall mounting interface (optional parts) tothe back of the set.When you install the Monitor set using a wallmounting interface (optional parts), attach itcarefully so it will not drop.1 If you use screw longer than standard, the monitor might be damaged internally.2 If you use improper screw, the product might bedamaged and drop from mounted position.In this case, LG Electronics is not responsiblefor it.Model22MK600M 24MK600MWall Mount (A x B) 75 x 75M4Standard screwNumber of screws 4Model27MK600M 27MK60TMWall Mount (A x B) 100 x 100M4Standard screwNumber of screws 4AENGENGLISHFor proper ventilation, allow a clearance of 3.94inches on each side and from the wall. Detailedinstructions are available from your dealer, see theoptional Tilt Wall Mounting Bracket Installation andSetup Guide.BCAUTIONDisconnect the power cord first, and thenyymove or install the Monitor set. Otherwiseelectric shock may occur.If you install the Monitor set on a ceiling oryyslanted wall, it may fall and result in severeinjury.Use only an authorized LG wall mountyyand contact the local dealer or qualifiedpersonnel.Do not over tighten the screws as this mayyycause damage to the Monitor set and voidyour warranty.Use only screws and wall mounts thatyymeet the VESA standard. Any damagesor injuries by misuse or using an improperaccessory are not covered by the warranty.Screw length from outer surface of backyycover should be under 8mm.Wall mount PadBack CoverWall mount PadBack CoverStandard screwMax.8mm (0.3 inches)NOTEUse the screws that are listed on the VESAyystandard screw specifications.The wall mount kit will include an installationyymanual and necessary parts.The wall mount bracket is optional. You canyyobtain additional accessories from your localdealer.The length of screws may differ dependingyyon the wall mount. Be sure to use the properlength.For more information, refer to theyyinstructions supplied with the wall mount.

14USING THE MONITOR SETENGLISHConnecting to a PCYour Monitor set supports Plug & Play*.yy*Plug & Play: A PC recognizes a connecteddevice that users connect to a PC and turnon, without device configuration or userintervention.HDMI connectionTransmits the digital video and audio signals fromyour PC to the Monitor set. Connect the PC andthe Monitor set with the HDMI cable as shown inthe following illustrations.D-SUB connectionTransmits analog video from your PC to theMonitor set. Connect the PC and the Monitor setwith the supplied D-sub 15 pin signal cable asshown in the following illustrations.HDMI IN 1HDMI IN 2NOTEIf you use HDMI PC, it can cause compatibilityyyproblem.Use a certified cable with the HDMI logoyyattached. If you do not use a certified HDMIcable, the screen may not display or aconnection error may occur.Recommended HDMI cable typesyy- High-Speed HDMI /TMM Cable- High-Speed HDMI /TM Cable with EthernetNOTEWhen using a D-Sub signal input cableyyconnector for MacintoshMac adapteryyFor Apple Macintosh use, a separate plugadapter is needed to change the 15 pinhigh density (3 row) D-SUB VGA connectoron the supplied cable to a 15 pin 2 rowconnector.NOTEWhen you want to use two PC in our Monitor,yyplease connect the signal cable(D-SUB/DVI-D/HDMI) respectively in Monitor set.If you turn the Monitor set on while it is cold,yythe screen may flicker. This is normal.Some red, green, or blue spots may appearyyon the screen. This is normal.