TFT-LCD TV OWNER 'S MANUAL

3y ago
30 Views
2 Downloads
3.11 MB
50 Pages
Last View : 3d ago
Last Download : 3m ago
Upload by : Evelyn Loftin
Transcription

TFT-LCD TVOWNER ' S MANUALPlease READ this manual carefully beforeoperating your TV, and retain it for futurereference.MODELS:HL37EHL42EHL47EHL52E

WARNINGRISK ELECTRIC SHOCKDO NOT OPENWARNING : To reduce the risk of electric shock do not remove cover or back.No user-serviceable parts inside refer service to qualified service personnel.Safety of operators has been taken into consideration at the design and manufacturephase, but inappropriate operation may cause electric shock or fire. To prevent the productfrom being damaged, the following rules should be observed for the installation, use andmaintenance of th product. Read the following safety instruction before starting the operation.The User Manual uses the following symbols to ensure a safe operation and preventany damage to operators or properties:THIS SYMBOL INDICATES THAT HIGH VOLTAGE IS PRESENTINSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACTWITH ANY INSIDE PART OF THIS PRODUCT.THIS SYMBOL INDICATES THAT THERE ARE IMPORTANTOPERATING AND MAINTENANCE INSTRUCTIONS IN THELITERATURE ACCOMPANYING THE APPLIANCE.FCC STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, use andcan radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However ,there is noguarantee that interference with not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encourage to try to correct the interference by one ormore of the following measures:*Reorient or relocate the receiving antenna.*Increase the separation between the equipment and receiver.*Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.*Consult the dealer or an experienced radio/TV technician for help.This device compiles with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may be not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.FCC CAUTION:To assure continued compliance and possible undesirable interference, the provided ferritecores must be used when connecting this plasma display to video equipment; and maintainat least 40cm spacing to other peripheral device.CANADIAN NOTICE:This Class B digital apparatus compiles with Canadian ICES-003.2 TV LCD-TFT

IMPORTANT SAFETY INSTRUCTIONSRead all of the instructions before using this appliance. When using thisappliance, always exercise basic safety precautions, including the following:1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance with the manufacturer s instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two bladeswith one wider than the other. A grounding type plug has two blades and a third grounding prong. The wideblade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consultan electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,PORTABLE CART WARNING(symbol provided by RETAC)or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods oftime.14) Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isS3126Adamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15) WARNING-To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,shall be placed on the apparatus.The apparatus shall not be exposed to dripping or splashing and that no objects filledwith liquids, such as vases, shall be placed on the apparatus.The mains plug is used as the disconnect device, remain it readily operable during theapparatus normal use.Owner s Manual 3

SAVE THESE INSTRUCTIONSThank you for using our Haier product. This easy-to-use manual will guide you ingetting the best use of your product. Remember to record the model and serialnumber. They are on label in back of the unit.Model numberserial numberDate of purchaseStaple your receipt to your manual. You will need it to obtain warranty service.4 TV LCD-TFT

IntroductionContentsWar nin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Saf ety I nst ruc tio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IntroductionCon tro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Connection Options . . . . . . . . . . . . . . . . . . . . . .Universal Remote Controller . . . . . . . . . . .InstallationAcc ess ori es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Antenna Connection . . . . . . . . . . .VCR Connection. . . . . . . . . . . . . . . . . . . . . . .External A/V Source Setup . . . . . . . . . .DVD Connection . . . . . . . . . . . . . . . . . . . .DTV Connection.Digital Audio Output . . . . . . . . . . . . . . . . . . . . .PC Connection. . . . . . . . . . . . . . . . . . . . . . . .Monitor Out Setup . . . . . . . . . . . . . . . . . . . . . .HDM I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cable Sample.Connecting Headphones . . . . . . . . . . . . . . . . . . . . .Pow er so urc e. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .OperationSwitching On/Off the TV set . . . . . . . . . . . . . . . . . . .Choose the Menu Language . . . . . .Choose the input Source.Channel MenuAutomatic Scan. . . . . . . . . . . . . . . .Man ual S can . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fine Tune.Edi t Pro gra m. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Rename . . . . . . . . . . . . . . . . . . . . . . . . . .S elect the desired program . . . . . . . . . .S elect the desired sound . . . . . . . . . .Mute . . . . . . . .Video MenuHow to select picture modes.How to customize your own picture status .Asp ect R ati o Con tro l . . . . . . . . . . . . . . . . . . . . . . . . . . .Audio MenuHow to select audio modes.How to customize your own audio status .SAP Broadcasts Setup.Time MenuDate /Time setting.Timer on setting.Timer off setting.Sleep Timer setting.Time zone setting.Daylight Saving setting.Function MenuClosed Captions.CC mode.NTSC Caption.DTV Caption.DTV Caption Style.OSD Timeout.Blue screen.OSD transparency.Adjust MenuScreen Setup for PC mode.Lock MenuParental Control rating and categories.Others FunctionsBri ef In fo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Quick program view.Setting up your remote control .USB system .Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Product Specifications . . . . . . . . . . . . . . . . . . . . . . . .Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Owner s Manual 5

IntroductionControls-This is a simplified representation of front panel.-Here shown may be somewhat different from your TV.Front panel controlsPOWERCH -CH VOL - VOL INPUTMENU1.CH-/ Program minus and plus, menu options2.VOL-/ Volume increase and decrease, menu reset and entry3.INPUT: all input resouce display and OK confirm:4.MENU Menu display5.POWER:Is used to activate the display or return to standby mode6 TV LCD-TFT

Connection OptionsLeft side connetionsANT INAntenna InputConnect cable or antennasignals to the TV, eitherdirectly or through yourcable box.HDMI2PCPC VIDEO InputConnect the monitoroutput connector froma PC to the jackHDMI2connect a signal toHDMI/DVI.21 YCOMPONENTLPbPrDVD/DTV Input(Component )Connect a componentvideo device to thesejacks.RS-VIDEOVIDEO1 LS-Video InputConnect S-Video out froman S-VIDEO device to theS-VIDEO input.RAC INPower Cord SocketThis TV operates on ACpower.The voltage is indicated onthe Specifications page.Never attempt to operatethe TV on DC powerPC/DVIOPTICALAUDIO INDVI/PC Audio InputConnect the audio out fromthe external device, usedwhile using a DVI to HDMIconnector.HDMI1HDMI1connect a signal toHDMI/DVI.VIDEO InputConnects thevideo signalfrom a videodevice.Earphone jack:Earphone audiooutput terminal.Power Cord SocketThis TV operates on ACpower.The voltage is indicated onthe Specifications page.Never attempt to operatethe TV on DC power

IntroductionRemote Controller- The remote controller cannot be operated unless the batteries are properly loaded.- When using the remote control, aim it at the remote control sensor on the TV.Function introductionTV USBPress the SELECT button repeatedly to select one of thesystem modes in which the remote control can be used.When the desired device is selected, the correspondingLED lights on 5seconds.POWERTurns your TV or any other programmedequipment on or off, depending on mode.FAVORITEOpen the favorite channel list.AUDIO.LISTOpen the audio channellist.CH.LISTOpen the channel list.TVC H LI S TM OD EF AV . LI S TMO D EZOOM( only SUB System)A U D I O LI S TTo enlarge or lessen the pictureUSBPress to enter USB signalZOOMTVHOTKEYHOTKEY ( only SUB System).Call up the menu//TVPress to enter TV signalRETURNIIRewind / Fastbackward /ForwardPlayPauseRETURNS.MODEP.MODESelects the picture appropriatefor the program s character.CC(closed caption)Select a closed caption:CC MUTE, CC ON, CC OFF.Selects the sound appropriate for the program'scharacter.ETI M ETI MFREEZEFreezes the currently-viewed picture, but audio continues.Press FREEZE button again to resume the normal picture.INPUTshow the input source mode.TIMEShows time.MENUINFOWhen you watch the TV, press the key, the informationdisplays on bottom of the screen.Brings up the main menu to the screen.EXITClears all on-screen displays andreturns toTV viewing from any menu.THUMBSTICK(Up/Down/Left/Right/OK)Allows you to navigate the on-screen menus and adjustthe system settings to your preference.SLEEP buttonDisplays the Sleep Timer option.MUTESwitches the sound on or offLIGHTARC(Aspect Ratio Control)Changes the aspect ratio.Press the light button, white LED will be ON, releasethis key, white LED will be OFF.SAPSelects MTS sound: Mono, Stereo, and SAP in Analogmode. Change the audio language in DTV mode.VOLUME UP/DOWNIncreases/decreases the sound level.CHANNEL UP/DOWNSelects available channelsNumeric buttonspress to change the channel.- buttonPress to select additional channels(digital and analog)being broadcast by the same station.For example, to select channel“54-3”, press “54”, then press “-” and “3”.Note: For DVD function see page 35.8 TV LCD-TFTQ.VIEWSwitch the current channel to the last channelyou have viewed.

InstallationExternal Equipment ConnectionsAccessoriesTVC H LI S TM OD EF AV . LI S TTVMO D EA U D I O LI S TZOOMHOTKEYRETURNTFT-LCD TVOWNER ' S MANUALETIM ETIMPlease READ this manual carefully beforeoperating your TV, and retain it for futurereference.Remote controllerOwner s manualAlkaline battery(AAA) 2Power cableAntenna ConnectionGenerally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or anoutdoor antenna .In different places, the suitable antenna type and position are different.Multi-family Dwellings/Apartments(Connect to wall antenna socket)Wall AntennaSocketBronze WireRF Coaxial Wire (75 ohm)VHF AntennaUHF AntennaTurn clockwise to tighten.Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)OutdoorAntennaBronze WireBe careful not to bend the bronze wire whenconnecting the antenna.To improve the picture quality in a poor signal area,please purchase a signal amplifier and install properly.If the antenna needs to be split for two TV s, install a 2Way Signal Splitter in the connections.If the antenna is not installed properly, contact your dealerfor assistance.Owner s Manual 9

InstallationExternal Equipment ConnectionsNOTE: All cables shown are not included with the TV.Choose Your ConnectionThere are several ways to connect your television, depending on the components you want to connectand the quality of the signal you want to achieve. The following are examples of some ways to connectyour TV. Choose the connection which is best for you.VCR connection- To avoid picture noise (interference), leave an adequate distance between the VCR and TVConnection Option 1Set VCR output switch to channel 3 or 4 andthen tune the TV to the same channel number.Connection Option 21 . Connect the audio and video cables from theVCR's output jacks to the TV input jacks, asshown in the figure.When connecting the TV to VCR, match thejack colors (Video yellow, Audio Left white,and Audio Right red).If you connect an S-VIDEO output from VCR tothe S-VIDEO input, the picture quality isimproved; compared to connecting a regularVCR to the Video input.2 . Insert a video tape into the VCR and pressPLAY on the VCR. (Refer to the VCR owner smanual.)3 . Select the input source with using theINPUT button on the remote control, andthen press / button to select the source,press the OK button to confirm.10 TV LCD-TFTANT INY2Y1Pb2 Pr2Pb1 Pr1LLRRS-VIDEOAV OUT LVIDEO LRR

InstallationExternal Equipment ConnectionsExternal A/V Source SetupHow to connectConnect the audio and video cables from the external equipment'soutput jacks to the TV input jacks, as shown in the figure.When connecting the TV to external equipment, match thejack colors (Video yellow, Audio Left white, and AudioRight red).How to use1. Select the input source with using the INPUT button onthe remote control.2. Press the / button to select the desired source.3. Press the ok button to confirm4. Operate the corresponding external equipment.Y2Y1Pb2 Pr2Pb1 Pr1LLRRS-VIDEOAV OUT LVIDEO LRRCamcorderVideo Game SetDVD connectionHow to connect1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the Y, Pb,Pr jacks on the TV and connect the DVD audio outputs to theYPbPr Audio IN jacks on the TV, as shown in the figure.2. If your DVD only has an S-VIDEO output jack, connect thisto the S-VIDEO input on the TV. as shown in the figure.NOTE: If your DVD player does not have component videooutput, use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the INPUT button on the remote control to select YPbPrmode.3. Press Play button on external equipment for program play.4. Refer to the DVD player's manual for operating instructions.Y2Y1Pb2 Pr2Pb1 Pr1LLRRS-VIDEOAV OUT LVIDEO LRRComponent Input portsTo get better picture quality, connect a DVD player to the componentinput ports as shown below.Component portson the TVYPbPrVideo output portson DVD playerYYYYPbB-YCbPBPrR-YCrPROwner s Manual 11

InstallationExternal Equipment ConnectionsDTV connection- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digitalsignals from a digital set-top box or other digital external device, refer to the figure as shown below.- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).How to connectUse the TV s (Y, PB , P R ) , PC or HDMIjack for video connections, depending onyour set-top box connector. Then, makethe corresponding audio connections.PCHow to useY2Y1Pb2 Pr2Pb1 Pr1LLRRS-VIDEOAV OUT LVIDEO LRRHDMI1PC/DVIOPTICALAUDIO IN1. Turn on the digital set-top box. (Referto the owner s manual for the digitalset-top box.)2. Use INPUT on the remote control to selectYPbPr, PC,or HDMI I/DVIYesYesYesYesDigital Set-top BoxAudio OutputSend the TV s audio to external audio equipment (stereo system) viathe Audio Output (Optical) port.How to connect1. Connect one end of an optical cable to the TV Audio (Optical)Output port.2. Connect the other end of the optical cable to the digital audio (optical)input on the audio equipment.See the external audio equipment instruction manual for operation.Note: When connecting with external audio equipments, such asamplifers or speakers, please turn the TV speakers off.Caution: Do not look into the optical output port.Looking at the laser beam may damageyour vision.12 TV LCD-TFTPC/DVIOPTICALAUDIO INAC IN

InstallationExternal Equipment ConnectionsPC connectionHow to connect1 . To get the best picture quality, adjust the PC graphics card to 1024 x768 .2 . Use the TV s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your PC connector.If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of eitherPC IN or DVI IN todisplay the PC on the TV.If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to eithe r PC or DVI; (the other mode isset to Plug and Play automatically by the TV.)3 . Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.How to use1 . Turn on the PC and the TV.2. Turn on the display by pressing the POWER button on the TV's remote control.3 . Use INP

TFT-LCD TV OWNER 'S MANUAL MODELS: HL37E HL42E HL47E HL52E. 2 TV LCD-TFT THIS SYMBOL INDICATES THAT HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF CONTACT . Connect the monitor output connector from a PC to the jack DVI/PC Audio Input Connect the audio out from the external device, used while using a DVI to HDMI .

Related Documents:

and power-saving energy management into a light-weighted LCD monitor. The LCD video monitor uses color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance. Features TFT LCD panel Composite video input/ output (for security monitor

Monitores LCD da HP Os monitores LCD da HP (visor de cristais líquidos) têm uma matriz activa, o ecrã Thin-Film Transistor (TFT - transístor de película fina). Este manual refere-se aos seguintes modelos: vp15 Monitor LCD vp17 Monitor LCD vp19 Monitor LCD FP1707 Monitor LCD WF1907 Monitor LCD w1707 Monitor LCD

Before setting up your LCD Monitor Some LCD Monitor models are packaged with a detached Table-Top Stand so you can mount your LCD Monitor to a wall right away. See page 10 (Installing the LCD Monitor to the Wall) if you want to mount the LCD Monitor to a wall. If you are not mounting the LCD Monitor to a wall, you will

Display type Color TFT LCD Color TFT LCD Color TFT LCD Display size, diagonal 6.5 in. 9 in. widescreen 10.4 in. Viewing area 132 x 99 mm 196 x 118 mm 211 x 158 mm Display resolution 640 x 480 VGA, 18-bit color graphics 800 x 480 WVGA, 18-bit color graphics 800 x 600 SVGA, 18-bit color graphics Aspect ratio 4:3 5:3 4:3 Brightness, typical 300 nits

COLOR TFT LCD MONITOR User Manual . General Information Thank you for choosing our TFT LCD (liquid crystal display) monitor. This product employs integrate circuits, low power consumption, and no radiation emission. It has fashion designed appearance and

Monitor Type TFT LCD Quad View Color w/ Sunshade & Flush-mount - for up to 4 Cameras TFT LCD Color - for up to 2 Cameras TFT LCD Color - for up to 3 Cameras Wired/Wireless Wired Systems Wired Systems Wired Systems Screen Size 10.1" 7" 7" Dot Resolution 1024 x 600 800 x 3 (RGB) x 480 800 x 3

Do not try to repair the TFT LCD Monitor yourself as it contains no user-serviceable parts. The TFT LCD Monitor should only be repaired by a qualified technician. Do not remove the TFT LCD Monitor cabinet. There is high-voltage parts inside that may cause electric shock to

Integrity inspection, American Petroleum Institute (API), Steel Tank Institute (STI), Magnetic Flux Leakage (MFL), Ultrasonic Testing (UT), National Fire Protection Association (NFPA). WHAT IS AN INTEGRITY INSPECTION An integrity inspection of a container(s) is a system designed to be sure that a container would not fail under normal operating conditions. In this application, it generally .