Stanley Underwater Catalog - Metro Hydraulic
UNDER WATER TOOLSPRODUCT CATALOGA WIDE RANGE OF UNDERWATER TOOL SOLUTIONSwww.stanleyinfrastructure.comSTANLEY INFRASTRUCTURE 6430 SE Lake Rd. Portland, OR 97222 1-800-972-2647 www.stanleyinfrastructure.com
SKSERIESPUMPS UNDERWATER TOOLSSINKER DRILLSINKER DRILL Model SK58The STANLEY SK58 Sinker Drill is a heavy duty rock drill designed for drilling underwaterin concrete, rock and masonry. The feathering on/off valve makes starting the drill bit easy.The SK58 uses industry standard drill steels and can drill up to a 3” (75 mm) diameterhole up to 20’ (6 m) deep. The direct drive rotation motor drives the 1” x 4¼” hex shankdrill steel and is adjustable between 0 and 300 rpm. Air is required to clear holes ofdebris. Painted hi-visibility yellow.When hydraulic hose exceeds 100’ (30.4 m) in length, increase I.D. of both pressure andreturn hose. For more information, consult STANLEY Infrastructure.ModelCapacitySK58310(NON-CE)3” HOLE, UPTO 20’ DEEPSteel Type1” X 41/4” HEXSHANK(2.54 CM X10.795 CM)Flow RangeWorkingPressure7-9 GPM /26-34 LPM1500-2000 PSI /105-140 BARCircuit TypeRotation SpeedHydraulicPortsCouplersHose WhipsOPEN CENTER0-300 RPM-8 SAE OPENINGNOYESAccessoriesPart No.DescriptionPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT0491403974FLUSH-FACE COUPLING SET, ½” NPTCARBIDE ROCK BIT, FOR USE WITH AIR, 2” DIAMETER,H-THREAD - REQUIRES DRILL STEEL31848DUAL HOSE, 50’ X ½”, WITH COUPLERS05170DRILL STEEL FOR USE WITH AIR, 1 X 4¼ “, H-THREAD,24” U/C05171DRILL STEEL FOR USE WITH AIR, 1 X 4¼”, H-THREAD,48” U/C31972DUAL HOSE, 25’ X ½” , WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERS05177CARBIDE ROCK BIT, FOR USE WITH AIR, 13 8” DIAMETER,H-THREAD - REQUIRES DRILL STEEL05178CARBIDE ROCK BIT, FOR USE WITH AIR, 1½” DIAMETER,H-THREAD - REQUIRES DRILL STEELwww.stanleyinfrastructure.com800-972-2647
HDHAMMER DRILLSERIESUNDERWATER TOOLSHAMMER DRILL Model HD45The feathering on/off valve and adjustable rotation speed allows easy drill bit start-upand precise control. The high torque rotation motor drives standard 736 Skil hex carbidetipped drill bits and is capable of drilling a 2” diameter hole up to 29” deep. Fluted drillbits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts.Painted hi-visibility yellow.ModelHD4531001ChuckCapacity2” DIAMETEROR 4” CORESteel Capacity736 SKIL HEXCircuit TypeFlow RangeOPEN CENTER7-9 GPM /26-34 cPortsCouplers8 PGM / 30 LPM1500-2000 PSI /105-140 BAR0-300 RPM8 SEA O-RINGVARIESAccessoriesPart No.DescriptionPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT05167CARBIDE BIT, 1½” X 24” OAL03974FLUSH-FACE COUPLING SET, ½” NPT02283CARBIDE BIT, 2” X 24” OAL31848DUAL HOSE, 50’ X ½”, WITH COUPLERS04668CARBIDE BIT, 1” X 18” OAL31972DUAL HOSE, 25’ X ½”, WITH COUPLERS04896CARBIDE BIT, 1¼” X 36” OAL58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERS27902PERCUSSION CORE BIT, 2½” DIAMETER X 6” OAL(PART #30279 REQUIRED)27904PERCUSSION CORE BIT, 3” DIAMETER X 6” OAL(PART #30279 REQUIRED)30279HD45 (SKIL 736) ADAPTER02280CARBIDE BIT, ¾” X 24” OAL05163CARBIDE BIT, 7 8” X 24” OAL02281CARBIDE BIT, 1” X 24”OAL02282CARBIDE BIT, 1¼” X 24” OAL800-972-2647www.stanleyinfrastructure.com
IDSERIESUNDERWATER TOOLSIMPACT DRILLIMPACT DRILL Model ID07The STANLEY ID07 Impact Drill is two hydraulic underwater tools in one - an impactwrench and a wood drill. The .” square drive impact wrench delivers torque up to500 ft lbs and can tighten or loosen nuts and bolts and drive lag screws. Use theID07 with the 05079 adapter and wood boring bits to drill up to 11 16” diameter holesinto timber with no reactive torque to the diver. Trigger guard and hi‑visibility yellowpaint is standard.Features Integral STANLEY Hyrevz gear motor strikes a perfect balance of high power and low weight Stainless Steel spools and fasteners Forward-Reverse with variable speed 500 ft lbs/675 Nm of impact torque Oversized trigger with guard for operator comfort Wiper seals on reversing and trigger spool Built in reverse check valve ensures long seal life Plastisol coated handle for comfortable ergonomic grip Forward position of handle provides better balance Open Center/Closed Center-Dual Spool Feature Cast-in lifting eye* whips and couplers are includedModelID0792001Capacity1/2 IN / 12.7MMPerformanceTORQUE 500 FT LBS / 675 NMWorkingPressureFlow Range4-12 GPM / 15-45 LPM750-2000 PSI / 50-140 BARHydraulic Ports8 SAE ORINGSConnect size and type3/8” MALE PIPE ADAPTERAccessoriesPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT03974FLUSH-FACE COUPLING SET, ½” NPT31848DUAL HOSE, 50’ X ½”, WITH COUPLERS31972DUAL HOSE, 25’ X ½”, WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERSWood Boring BitsPart No.DescriptionPart No.Description05079ADAPTOR ½” FEMALE SQ. DR. X 7 16 “ QC HEX27857WOOD BIT: 13 16” DIA. X 12” X 16” OAL27850WOOD BIT: 9 16 “ DIA. X 8” X 12” OAL27858WOOD BIT: 15 16” DIA. X 12” X 16” OAL27851WOOD BIT: 11 16” DIA. X 8” X 12” OAL27859WOOD BIT: 17 16” DIA. X 12” X 16” OAL27852WOOD BIT: 13 16” DIA. X 8” X 12” OAL27860WOOD BIT: 9 16” DIA. X 18” X 22” OAL27853WOOD BIT: 15 16” DIA. X 8” X 12” OAL27861WOOD BIT: 11 16” DIA. X 18” X 22” OAL27854WOOD BIT: 17 16” DIA. X 8” X 12” OAL27862WOOD BIT: 13 16” DIA. X 18” X 22” OAL27855WOOD BIT: 9 16” DIA. X 12” X 16” OAL27863WOOD BIT: 15 16” DIA. X 18” X 22” OALWOOD BIT: 11 16” DIA. X 12” X 16” OAL27864WOOD BIT: 17 16” DIA. X 18” X 22” OAL27856Wood Boring Bits have 7/16” Quick Change, Hex Shank Requires Part # 05079 Adaptor for use with ID07 U/W 647
DRILL Model DL07652The STANLEY DL07 hydraulic drill is a forward/reverse, variable speed drill with a ½”keyed chuck for underwater drilling applications. The DL07 has more than enough torqueto drill most steel, masonry, wood or coral. A two position assist handle and triggerguard are standard. See chart below for speeds at select gpm of hydraulic flow.Painted hi-visibility yellow.Features Integral STANLEY Hyrevz gear motor produces high torque at any drilling speed Stainless Steel spools and fasteners Forward-Reverse with variable speed Dual position assist handle provides increased control Oversized trigger with guard for operator comfort Wiper seals on reversing and trigger spool Built in reverse check valve ensures long seal life Plastisol handle for comfortable ergonomic grip Forward position of handle provides better balance Open Center/Closed Center-Dual Spool Feature Cast-in lifting eye* whips and couplers not includedChuckCapacityMODELDL07652DL0765201Flow RangeCouplersTorque3-10 GPM / 11-38 LPM1000-2000 PSI / 70-140 BAR3/8” MALE PIPE ADAPTER350-1250 RPM1/2” / 12MM3-10 GPM / 11-38 LPM1000-2000 PSI / 70-140 BAR3/8” MALE PIPE ADAPTER350-1250 RPMDL07 Speed/Hydraulic FlowSpeed (RPM)35047575010001250Working Pressure1/2” / 12MMDL07 Torque at PSI/BarHydraulic Flow3 GPM / 11.3 LPM4 GPM / 15 LPM6 GPM / 23 LPM8 GPM / 30 LPM10 GPM / 38 LPMTorque4 FT LBS @ 500 PSI9 FT LBS @ 1000 PSI14 FT LBS @ 1500 PSI19 FT LBS @ 2000 PSIPSI / BAR0.5 NM @ 35 BAR1.2 NM @ 70 BAR1.9 NM @ 105 BAR2.6 NM @ 140 BARAccessoriesPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT03974FLUSH-FACE COUPLING SET, ½” NPT31848DUAL HOSE, 50’ X ½”, WITH COUPLERS31972DUAL HOSE, 25’ X ½”, WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERS01857ADJUSTABLE CHUCK AND ADAPTER, ¾” SQUARE X ¾”04365¾” CHUCK, 3 JT TAPER , USE 5/8” LLSERIESUNDERWATER TOOLS
IWSERIESUNDERWATER TOOLSIMPACT WRENCHESIMPACT WRENCHES Model IW12 IW16 IW24IW12IW16The STANLEY IW Series of tools are medium to extreme duty square drive impactwrenches designed for some of the toughest underwater bolting applications.Powered by a integral STANLEY Hyrevz motor, our impact wrenches have an impactintensity ranging from 250 ft lbs of torque to 3,500 ft lbs of torque. Designed to runfrom a wide range of hydraulic circuits, this wrench allows underwater bolting in themost extreme applications. Hi-visibility yellow paint is standard.ModelCapacityTorqueIW24(NON CE)Features Integral STANLEY Hyrevz gear motor produces high torque Stainless Steel spools and fasteners Forward-Reverse with variable speed “D” style grip handle with inside trigger Feathering on/off trigger for precise control Adjustable impact intensity Durable swing hammer mechanism Cast-in lifting eye Pistol grip style handle dipped in Plastisol for comfortableergonomic grip available on IW12WorkingPressureFlow 4” SQUARE DRIVE250-1200 FT LBS / 340-1632 NM4-12 GPM / 15-45 LPM1000-2000 PSI / 70-140 BAR8 SAE O-RINGS3/8”IW163501” SQUARE DRIVE500-2500 FT LBS / 680-3400 NM7-12 GPM / 26-45 LPM1500-2000 PSI / 105-140 BAR8 SAE O-RINGS3/8”IW2436011/2” SQUARE DRIVE800-3500FT LBS / 1088-4760 NM7-12 GPM / 26-45 LPM1800-2000 PSI / 124-140 BAR8 SAE O-RINGS3/8”HoseWhipsNONONONOAccessoriesPart No.DescriptionPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT33277SOCKET RETAINER RING, 1” SQUARE DRIVE SOCKET (IW16 MODEL)03974FLUSH-FACE COUPLING SET, ½” NPT01857ADJUSTABLE CHUCK & ADAPTER ¾” SQ FEMALE X ¾”CHUCK (IW12 MODEL)06830HOSE WHIP 18” LONG, -8 SAE X ½” NPT31848DUAL HOSE, 50’ X ½”, WITH COUPLERS31972DUAL HOSE, 25’ X ½”, WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERS31203EXTENSION, 10”, 1” DRIVE (IW16 MODEL)33276SOCKET RETAINER PIN, 1” SQUARE DRIVE SOCKET (IW16 MODEL)www.stanleyinfrastructure.com800-972-2647
COGRCUT-OFF SAW &GRINDERSERIESUNDERWATER TOOLSCUT-OFF SAW Model CO23The CO23 Cut-Off Saw is a hydraulic powered sawfor dimensional cutting of metal, concrete, rock,masonry and coral. It has a high torque gear motor and10” blade capacity for abrasive and diamond wheelswith a 1” arbor. The CO23 is designed for underwateroperation and is painted hi-visibility yellow.ModelCO23341CapacityPerformance10” / 25.4 CM WHEEL3275 RPM / 15 GPMArborCircuit Type1” / 2.5CMFeatures Integral STANLEY Hyrevz gear motor produces high torque Direct drive motor Stainless Steel spool and fasteners Adjustable shoe for precise cuts Interlocking safety trigger Cast aluminum handle and guard for durability Counter-clockwise rotation Wide flow rangeWorkingPressureFlow Range1000-2000 PSI / 70-140 BAR3/8”ConnectionSize & Type8 SAE O-RINGSAccessoriesPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT03974FLUSH-FACE COUPLING SET, ½” NPT06830HOSE WHIP 18” LONG, -8 SAE X ½” NPT0369410” / 25.4 CM DIAMETER, 1” ARBOR, DIAMOND BLADE FOR CONCRETE0411610” / 25.4 CM DIAMETER, 1” ARBOR, ABRASIVE BLADE FOR CONCRETEPart No.Description0411710” / 25.4 CM DIAMETER, 1” ARBOR, ABRASIVE BLADEFOR ALUMINUM AND METAL31848DUAL HOSE, 50’ X ½”, WITH COUPLERS31972DUAL HOSE, 25’ X ½”, WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERSGRINDER Model GR29The STANLEY Hydraulic GR29 Grinder is a right angle grinderthat can be used for grinding and cleaning in underwaterapplications with a variety of wheels, brushes and attachments.The high torque gear motor drives a standard 5 8 - 11 threadedspindle. A 9” adjustable wheel guard, two position assist handleand trigger guard are standard. Painted hi‑visibility yellow.ModelGR2930101CapacitySpindle9” / 23CM WHEEL5/8” (1.58MM) - 11 THREADEDCircuitOPEN CENTER Integral STANLEY Hyrevz gear motor produces high torque Stainless Steel spools and fasteners Two position assist handle for right/left hand operation Oversized trigger with guard for diver comfort Adjustable wheel guard for infinite positions Plastisol covered handle for comfortable ergonomic grip Use with grinding wheels, hull scrubbing brushes, wire and nylonbrushes, barnacle busters and Desmond wheels 3200 rpm @ 12 gpm Cast-in lifting eyeRPM3200 @ 12 GPM / 45 LPMWorkingPressureHydraulicPorts1000-2000 PSI / 70-140 BAR38 SAE ORINGSAccessoriesPart No.DescriptionPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT03691GRINDING WHEEL, 7” DIAMETER X 5 8 - 11 THREAD03974FLUSH-FACE COUPLING SET, ½” NPT05194ADAPTER, 5 8 - 11 THREAD, DEPRESSED CENTER WHEELHOSE WHIP 18” LONG, -8 SAE X ½” NPT31848DUAL HOSE, 50’ X ½”, WITH COUPLERS068300258702588GRINDING WHEEL FOR METAL, 9” DIAMETER X 5 8 - 11 THDGRINDING WHEEL FOR MASONRY, 9” DIAMETER X 5 8 - 11 THD800-972-264731972DUAL HOSE, 25’ X ½”, WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERSwww.stanleyinfrastructure.comHoseWhipsNO
CHSERIESUNDERWATER TOOLSCHIPPING HAMMERCHIPPING HAMMER Model CH15 CH18CH18CH15The ergonomic ”D“ handle with protected trigger preventsaccidental operation of the tool. The handle is Plastisolcoated for diver comfort. The CH18 has a slide latch styletool bit retainer that will accept .580 hex shank,round collar tool bits. Painted hi-visibility yellow.SteelCapacityModelHandle TypeFeatures Ergonomic ”D“ handle with protected trigger Stainless Steel spool and fasteners Handle is Plastisol coated for diver comfort Uses standard .580 hex shank, round collar tool bits High power to weight ratio Operates in any positionCircuit TypeCH18111.580 HEXSHARKD” HANDLE WITH INSIDETRIGGEROPEN CENTERCH1533101.580 HEXSHANK“D” HANDLE WITH INSIDETRIGGEROPEN CENTERFlow RangeWorkingPressure7-9 GPM / 26-34 LPM1500-2000 PSI /105-140 BAR7-9 GPM / 26-34 LPM1000-2000 PSI /70-140 BARAccessoriesPart No.Description03971FFLUSH-FACE COUPLING SET, 3 8 “ NPT03974FLUSH-FACE COUPLING SET, ½” NPT31848DUAL HOSE, 50’ X ½”, WITH COUPLERS31972DUAL HOSE, 25’ X ½”, WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½”, WITH COUPLERS02278FLAT CHISEL, 1” X 18”, .580 HEX SHANK, ROUND COLLAR (MODEL CH18)02279BULL POINT, 1” X 18”, .580 HEX SHANK, ROUND COLLAR (MODEL CH18)03690CHISEL BIT, 1” X 9”, .580 HEX SHANK, ROUND COLLAR (MODEL CH18)03963CHISEL BIT, 2” X 5”, .580 HEX SHANK, ROUND COLLAR (MODEL aulic PortsCouplerHose Whips6 SAE O RINGNOYES6 SAE O RINGYESYES
SERIESCHAIN SAWSDSCSUNDERWATER TOOLSCHAIN SAWS Model DS11 CS11 CS06Features Direct drive motor - no chain coast when trigger is released Integral STANLEY Hyrevz gear motor for durability and power Stainless Steel spool and fasteners Interlocking safety trigger and hand guard Order bar and chain separately – See Chart for SelectionSTANLEY underwater saws are built to withstand the mostdemanding underwater conditions. The DS11 Diamond ChainSaw is specifically designed to cut solid concrete underwaterwith the ability to plunge cut sea walls up to 18 inches thick.It comes in two available bar lengths (15” and 18”) and twodifferent chains depending on the amount of rebar and hardnessof concrete. The CS06 and CS11 are both designed to cut woodstructures underwater such as bridge pilings, pier, and docktimbers. Both feature the STANLEY Hyrevz motor for increaseddurability and power. The power to weight ratio of all chainsawsis significantly higher than any other comparable chainsaw.ModelCapacityChain TypeCircuit TypeWorkingPressureFlow RangeCouplersHose WhipsDS11500015 OR 18” / 38 OR 45 CM BARDIAMOND IMPREGNATEDCHAIN SEGMENTSOPEN CENTER12 GPM / 45 LPM1000-2000 PSI /70-140 BARYESYESCS11150D24,32,36,42 IN / 61,81,91,107 CM3/8” PITCHOPEN CENTER 14 GPM / 53 LPM1500-2000 PSI /105-140 BARYESYESCS0663015 & 20” / 38 & 51 CMSTANDARD FLOATING RIMSPROCKET & WEAR PLATES7-9GPM / 26-34 LPM1500-2000 PSI /105-140 BARNONOPinnacle-32Pinnacle-39150 in-ft600-800 in-ftUltra-32Ultra-37Extra HardMaterialChertFlintApproximateMoh‘s ScaleReinforcingSteel91500 in-ftHardMediumBasaltQuartzGranite RiverRockMarble LimestoneSandstone87546Lots of Steel1”SoftSingle Mat#5#43#3No SteelWire MeshAccessoriesPart No.DescriptionPart No.Description3030515" BAR, SPROCKET NOSE31848DUAL HOSE, 50’ X ½”, WITH COUPLERS5680115” DIAMOND CHAIN, ULTRA 3231972DUAL HOSE, 25’ X ½”, WITH COUPLERS5680315” DIAMOND CHAIN, PINNACLE, 3231972TWINNED HOSE, 25’ X ½”, WITH COUPLERS3030618" BAR, SPROCKET NOSE58634TWINNED HOSE, 50’ X ½”, WITH COUPLERS5680218” DIAMOND CHAIN, ULTRA 3720859DIAMOND CHAIN BUTTERFLY REPAIR KIT5863218” DIAMOND CHAIN, PINNACLE, 3703971FLUSH-FACE COUPLING SET, 3 8” NPT03974FLUSH-FACE COUPLING SET, ½” NPT06830HOSE WHIP 18” LONG, -8 SAE X ½” NPT23517SPROCKET WRENCH800-972-2647AbrasiveMasonry,Brick, Block,Green ConcreteSome SteelDouble MatINTERNAL WATER CHANNELSIN BAR2000 in-ft2000 in-ftAggregateLubrication/Cooling20857CHAIN REPAIR SPINNER20858CHAIN REPAIR BREAKERDCP30101WATER PUMP, 12 VDC, BATTERY CLIPDCP30100WATER PUMP, 12 VDC, MARINE TYPE PLUGwww.stanleyinfrastructure.com
TP &SMSERIESUNDERWATER TOOLSTRASH PUMPS &SUMP PUMPSPUMPS Model SM50 TP03 TP08TP08TP03SM50With a range of 450 to 800 GPM of output flow the trash pumps offered by STANLEYInfrastructure are capable of moving high volumes of water, sand slurries, gravel, mud, andsolids up to 4 inches in diameter. The SM50 Submersible Pump is a self-priming hydraulicdewatering pump with 3 inch NPFT discharge and a discharge flow of 500 gpm. The caststainless steel semi-closed impeller resist corrosion and the cast aluminum housing fits theneed for high volume and high head pump applications. Can draw water down to 3 ½ “.ModelTP08013Capacity4” (10.16CM) NPT 4” CAMLOCKWorkingPressurePerformanceFlow Range800 GPM / 3028 LPM7-10 GPM / 26-38 LPM2000 PSI /140 BAR10 PRESSURE12 RETURN10 PRESSURE12 RETURN10 PRESSURE12 RETURNTP03003013” (7.62 CM) NPTF 3” CAMLOCK450 GPM / 1703 LPM7-9 GPM / 26-34 LPM2000 PSI /140 BARSM501003” (7.62CM) NPTF 3” CAMLOCK500 GPM / 1892 LPM7-12 GPM / 26-45 LPM1000-2000 PSI /70-140 BARAccessoriesPart No.Description03974FLUSH-FACE COUPLING SET, ½ “ NPT31848DUAL HOSE, 50’ X ½ “, WITH COUPLERS31972DUAL HOSE, 25’ X ½”, WITH COUPLERS58633TWINNED HOSE, 25’ X ½”, WITH COUPLERS58634TWINNED HOSE, 50’ X ½ “, WITH COUPLERS65624DISCHARGE HOSE, LAY-FLAT, 4” DIAMETER X 25’WITH MALE & FEMALE 4” CAMLOCK hips1/2” NPTYESNO/8” MALE PIPEADAPTERYESNO3/8” MALE PIPEADAPTERYESNOHydraulic Ports800-972-2647Connection3
BRBREAKERSSERIESUNDERWATER TOOLSBREAKERS Model BR45 BR67 BR87BR45BR87BR6740 LB70 LB90 LB2-6” CONCRETE6-8” CONCRETE8 ” CONCRETESTANLEY Infrastructure offers small to large size underwater hand held breakers with a weight class rangingfrom 50 lbs to 90 lbs. The BR87 is the hardest hitting underwater breaker we offer and can be used for rockbreaking, coral removal, and rod and anchor driving. The feathering on/off valve on all of our breakers controlsthe speed and allows for easier initial tool placement. Standard 1 1 8 “ x 6” hex chuck and latch retainer.Painted hi-visibility yellow.ModelPerformanceHandleTypeSteel CapacityCircuit TypeFlow RangeWorkingPressureHydraulic PortsCouplersHoseWhipsBR873201080 BPM @ 8 GPM1” 1/8” X 6” HEXT-HANDLEOPEN CENTER7-9 GPM / 26-34 LPM1,500-2000 PSI /105-140 BAR8 SAE O-RINGNOYESBR673201300 BPM @ 8 GPM3” NPTF 3” CAMLOCKT-HANDLEOPEN CENTER7-9 GPM / 26-34 LPM1,500-2000 PSI /105-140 BAR8 SAE O-RINGNOYES7-9 GPM 26-34 LPM1500-2000 PSI /105-140 BAR8 SAE O-RINGNOYESBR453501525 BMP @ 8 GPM3” NPTF 3” CAMLOCKT-HANDLEOPEN CENTERAccessoriesPart No.DescriptionPart No.Description03971FLUSH-FACE COUPLING SET, 3 8” NPT023343” WIDE CHISEL, 11 8” HEX, 14” UNDER COLLAR03974FLUSH-FACE COUPLING SET, 1 2” NPT03990NARROW CHISEL, 11 8” HEX, 14” UNDER COLLARDUAL HOSE, 50’ X 1 2”, WITH COUPLERS04176ROD DRIVER, 11 8” HEX, 1” RODDUAL HOSE, 25’ X 1 2”, WITH COUPLERS08106ASPHALT WEDGE, 11 8” HEX58633TWINNED HOSE, 25’ X 1 2”, WITH COUPLERS07702MOIL POINT, 1” HEX, 14” UNDER COLLAR58634TWINNED HOSE, 50’ X 1 2”, WITH COUPLERS07703NARROW CHISEL, 1” HEX, 14” UNDER COLLARCLAY SPADE, 11 8” HEX, 51 2” WIDE BLADE077043” WIDE CHISEL, 1” HEX, 14” UNDER COLLAR3184831972023310233202333ASPHALT CUTTER, 11 8” HEX, 5” WIDE BLADEMOIL POINT, 11 8” HEX, 14” UNDER COLLAR800-972-264707705CLAY SPADE, 1” HEX, 51 2 “ WIDE BLADE07706ASPHALT WEDGE, 1” HEX, 3” WIDE BLADEwww.stanleyinfrastructure.com
HANDHELD AND MOUNTED SOLUTIONS FORELECTRICAL, MUNICIPAL, RAILROAD,CONSTRUCTION AND DEMOLITION APPLICATIONSYour Authorized Stanley Dealer6430 SE Lake Rd.Portland, OR 97222Tel. 800-972-2647Fax 503-652-1780www.stanleyinfrastructure.com0818
IMPACT DRILL * whips and couplers are included SERIES ID IMPACT DRILL Model ID07 The STANLEY ID07 Impact Drill is two hydraulic underwater tools in one - an impact wrench and a wood drill. The .” square drive impact wrench delivers torque up to 500 ft lbs and can tight
stanley fastening systems, lp; stanley housing fund inc. stanley industrial & automotive, llc; stanley inspection l l c. stanley international holdings, inc; stanley inspection us llc. stanley logistics llc; stanley pipeline inspection, llc. stanley security solutions inc; stanley supply & services inc. the black & decker corporation; the .
United States Population by Metropolitan Size/Status, 1980–2010 2010 Population Shares by Metro Size (%) Chart 1 Chart 2 large metro ( 500k) small metro ( 500k) non-metro large metro 65.6% small metro 18.0% non-metro 16.4% Growth Rates by Metro Size 12% 12.5 14.3 10% 16% 14% 8% 6% 4% 2% 0% 1980–1990 1990–2000 2000–2010 10.9 8.8 13.1 10 .
HYDRAULIC BOTTLE JACKS 1 HYDRAULIC BOTTLE JACKS K12150 - 1850kg Hydraulic Bottle Jack K12151 - 4000kg Hydraulic Bottle Jack K12152 - 6000kg Hydraulic Bottle Jack K12153 - 10000kg Hydraulic Bottle Jack K12157 - 20000kg Hydraulic Bottle Jack K12158 - 10000kg Hydraulic Bottle Jack K12159 - 20000kg Hydraulic Bottle Jack ED1 / JUNE 19 Distributed by Kincrome Tools and Equipment www.kincrome.com.au
Quick coupler, hydraulic (female) - 3/8” 8500-10908 Hoses Hydraulic hose set (50 ft., with couplers) 8500-10915 Pigtails Hydraulic hose for most Stanley products 8500-10918 Hydraulic hose for Stanley impact wrench 8500-10919 Hydraulic hose for Matweld tools 8500-10920 Tamping Tools Tools: Stanley
Stanley rescued his mother’s ring by going down into the grate by the sidewalk. Arthur turned Stanley back to normal using his bicycle pump. Arthur flew Stanley like a kite in the park. A bulletin board fell on Stanley and flattened him. Stanley caught the art thieves at the museum. Stanley was mailed to California in
the limited depth of underwater welding. Welding equipment transformed from manual welding to underwater automatic welding. The efficient and low-cost underwater welding was achieved[7]. In order to study the automatic welding technology under larger deep-water environment, the underwater automatic welding system was designed in this paper. The
cast caused by the effects of underwater imaging conditions deteriorate the capability to fully extract valuable information from underwater images for further processing such as marine, mine detection and aquatic robot inspection. Hence, it is of great interest to restore degraded underwater images for high-quality underwater imaging [3].
Organizations have to face many challenges in modern era. The same is the position in schools and collages as they are also organizations. To meet the challenges like competition, efficient and economical uses of sources and maximum output, knowledge of management and theories of management is basic requirement. Among Management Theories, Classical Management Theories are very important as .
