MENG 3310 – Fluid Mechanics Course Syllabus
Department of Mechanical EngineeringPhone: 1.903.566.7003Fax: 1.903.566.7148Uttyler.edu/engineeringMENG 3310 – Fluid MechanicsCourse SyllabusSemester / YearCatalog DescriptionPrerequisitesSection Number(s)InstructorContact infoClass Type / LocationClass TimesOffice HoursCreditsTextbooks andReference MaterialsOptional ReferencesAdditional requirementsInstruction / EvaluationMethod/HomeworkFall 2020Basic concepts of a fluid, and the fundamentals and applications ofideal and real fluid flow. Topics include fluid statics, conservationprinciples, the Bernoulli equation, fluid flow in pipes, open channelflow, and fluid flow measurement devices.ENGR 2302, MATH 3404, and MATH 3305030 and 031Dr. Soren Maloneysmaloney@uttyler.eduHybrid, face-to-face or zoom lecture and lab/studio – HEC CampusMon/Wed 9:05 AM to 10:25 AMWed 5:30 PM to 8:00 PMBy appointment3 credit hours with 3 hours of lecture per weekLectures will reference material from a range of fluid mechanicstext and provide a full complement of lecture notes with practicequestions:1. Munson, Young and Okiishi's Fundamentals of FluidMechanics, 8th Edition, Wiley, 2016. ISBN:9781119080701.2. Schaum’s Outline of Fluid Mechanics and Hydraulics, 4thEdition (Schaum's Outlines) 4th Edition by Liu, Ranald andEvett3. Student Solutions Manual and Study Guide, Fundamentalsof Fluid Mechanics, 7th, Munson et al, Wiley, 2013.4. Solving Problems in Fluid Mechanics Volume 1 byDouglas, 3rd ed, ELBS with LongmanTBDTBDThere will be two in-semester exams and the final exam.Practice questions shall be assigned but not graded. Students mustturn in the homework during the class period on the due date;please keep in mind that no late submission will be accepted.The revised homework will be needed to discuss problems ofexams if the student asks for review. That is, if a problem in theexam has a related problem in a homework, the student waives the1 of 7
Department of Mechanical EngineeringPhone: 1.903.566.7003Fax: 1.903.566.7148Uttyler.edu/engineeringright of discussing the problem with the instructor if the studentdoes not present/bring the revised homework problem.Grading Policy / ScaleCensus DateAttendance / MakeuppolicyCourse LearningObjectives / ABET &PEOs relationTentative ScheduleWeek BeginningAug 24Grading in this course will be based on the following:- Quizzes20%- First Quiz25%- Second Quiz25%- Final Exam.30%Scale: A 90, B 80, C 70, D 60, F 60.Grade appeal: grades can be appealed by meeting the instructorduring office hours, but no later than a week after the grade hasbeen given.September 4, 2020 (Date to withdraw without penalty)Attendance at every meeting is strongly encouraged but notmandatory. There will be no makeup for missed in-class work. Anopportunity to make up a missed exam may be available to studentswith an excused absence. Be advised that makeup exams maybemore challenging. Excused absences include absences forUniversity- sponsored events and for religious observances (see theUniversity policy link above for the procedures to follow). Othermakeups are granted only in extreme cases and at the discretion ofthe instructor. Excused absence due to illness will require evidenceof treatment by medical personnel or at a medical facility.By the end of this course students will be able to:1. Recognize and use fundamental fluid properties2. Calculate static fluid properties and forces3. Apply principles of conservation of mass in engineeringproblems4. Apply principles of conservation of momentum inengineering problems5. Apply principles of conservation of energy in engineeringproblems6. Use Bernoulli’s Equation for the calculation of flowparameters7. Use dimensional analysis to obtain dimensionless groups influid mechanics8. Calculate and use minor and major head losses in pipeflows9. Apply basic boundary layer theory to internal and externalflowsTopicIntroduction & Fluid Properties2 of 7
Department of Mechanical EngineeringPhone: 1.903.566.7003Fax: 1.903.566.7148Uttyler.edu/engineeringAug 31Sep 7Sep 14Sep 21Sep 28Oct 5Oct 12Oct 19Oct 26Nov 2Nov 9Nov 16Nov 23Nov 30Dec 7Dec 14Static Pressure and ManometryFluid Pressure and Forces on SurfacesBuoyancy, Flotation & Stability of Floating BodiesFirst ExamLiquids in motionLiquids in motion continuedPitot tubes and constriction flow metersSecond ExamFlow measurement at notches and weirsLosses of energy in pipelinesLosses of energy in pipelines continuedFlow past a solid boundaryThanksgiving Week – No classAdditional Practice QuestionsFinal ExamFinal GradesUniversity, College, and Department Policies:1. ModificationsThe instructor reserves the right to change this syllabus partially or fully at any point in time. Sufficienttime and notice will be provided to the class before the activation of the changes.2. UT Tyler Honor CodeEvery member of the UT Tyler community joins together to embrace: Honor and integrity that will notallow me to lie, cheat, or steal, nor to accept the actions of those who do.3. Student Standards of Academic ConductDisciplinary proceedings may be initiated against any student who engages in scholastic dishonesty,including, but not limited to, cheating, plagiarism, collusion, the submission for credit of any work ormaterials that are attributable in whole or in part to another person, or material which has been submittedwithin a different course without explicit approval of the instructor, taking an examination for anotherperson, any act designed to give unfair advantage to a student or the attempt to commit such acts.i.“Cheating” includes, but is not limited to: copying from another student’s test paper; using, during a test, materials not authorized by the person giving the test; failure to comply with instructions given by the person administering the test; possession during a test of materials, or devices and instruments allowing access to materials,which are not authorized by the person giving the test, such as class notes or specifically designed“crib notes” as well as cell phones, to name a few. The presence of textbooks constitutes aviolation if they have been specifically prohibited by the person administering the test; using, buying, stealing, transporting, or soliciting in whole or part the contents of anunadministered test, test key, homework solution, or computer program;3 of 7
Department of Mechanical EngineeringPhone: 1.903.566.7003Fax: 1.903.566.7148Uttyler.edu/engineering ii.iii.iv.v.collaborating with or seeking aid from another student or person during a test or other assignmentwithout explicit authorization;discussing the contents of an examination with another student who will take the examination;divulging the contents of an examination, for the purpose of preserving questions for use byanother, or removing material from the exam location, when the instructors has designated thatthe examination is not to be removed from the examination room or not to be returned or to bekept by the student;substituting for another person, or permitting another person to substitute for oneself to take acourse, a test, or any course-related assignment;paying or offering money or other valuable thing to, or coercing another person to obtain anunadministered test, test key, homework solution, or computer program or information about anunadministered test, test key, home solution or computer program;falsifying research data, laboratory reports, and/or other academic work offered for credit;taking, keeping, misplacing, or damaging the property of The University of Texas at Tyler, or ofanother, if the student knows or reasonably should know that an unfair academic advantagewould be gained by such conduct; andmisrepresenting facts, including providing false grades or resumes, for the purpose of obtainingan academic or financial benefit or injuring another student academically or financially.“Plagiarism” includes, but is not limited to, the appropriation, buying, receiving as a gift, orobtaining by any means another’s work and the submission of it as one’s own academic workoffered for credit.“Collusion” includes, but is not limited to, the unauthorized collaboration with another person inpreparing academic assignments offered for credit or collaboration with another person to commit aviolation of any section of the rules on scholastic dishonesty.All written work that is submitted will be subject to review by plagiarism software.Penalty for any related infractions will be decided at the discretion of the instructor including, butnot limited to, granting of a failing grade in part or the course or in the entire course.4. Students Rights and ResponsibilitiesTo know and understand the policies that affect your rights and responsibilities as a student at UT Tyler,please follow this link: ties.php5. Important Covid-19 Information for Classrooms and LaboratoriesStudents are required to wear face masks covering their nose and mouth, and follow social distancingguidelines, at all times in public settings (including classrooms and laboratories), as specifiedby Procedures for Fall 2020 Return to Normal Operations. The UT Tyler community of Patriots viewsadoption of these practices consistent with its Honor Code and a sign of good citizenship and respectfulcare of fellow classmates, faculty, and staff.Students who are feeling ill or experiencing symptoms such as sneezing, coughing, or a higher thannormal temperature will be excused from class and should stay at home and may join the class remotely.Students who have difficulty adhering to the Covid-19 safety policies for health reasons are alsoencouraged to join the class remotely. Students needing additional accommodations may contact theOffice of Student Accessibility and Resources at University Center 3150, or call (903) 566-7079 oremail saroffice@uttyler.edu.4 of 7
Department of Mechanical EngineeringPhone: 1.903.566.7003Fax: 1.903.566.7148Uttyler.edu/engineering6. Recording of Class SessionsClass sessions may be recorded by the instructor for use by students enrolled in this course.Recordings that contain personally identifiable information or other information subject toFERPA shall not be shared with individuals not enrolled in this course unless appropriateconsent is obtained from all relevant students. Class recordings are reserved only for the use ofstudents enrolled in the course and only for educational purposes. Course recordings should notbe shared outside of the course in any form without express permission.7. Campus CarryWe respect the right and privacy of students 21 and over who are duly licensed to carry concealedweapons in this class. License holders are expected to behave responsibly and keep a handgun secure andconcealed. More information is available at p8. UT Tyler a Tobacco-Free UniversityAll forms of tobacco will not be permitted on the UT Tyler main campus, branch campuses, and anyproperty owned by UT Tyler. This applies to all members of the University community, includingstudents, faculty, staff, University affiliates, contractors, and visitors.Forms of tobacco not permitted include cigarettes, cigars, pipes, water pipes (hookah), bidis, kreteks,electronic cigarettes, smokelesstobacco, snuff, chewing tobacco, and all other tobacco products.There are several cessation programs available to students looking to quit smoking, including counseling,quitlines, and group support.For more information on cessation programs please visit www.uttyler.edu/tobacco-free.9. Grade Replacement/Forgiveness and Census Date PoliciesStudents repeating a course for grade forgiveness (grade replacement) must file a Grade ReplacementContract with the Enrollment Services Center (ADM 230) on or before the Census Date of the semester inwhich the course will be repeated. Grade Replacement Contracts are available in the Enrollment ServicesCenter or at http://www.uttyler.edu/registrar. Each semester’s Census Date can be found on the Contractitself, on the Academic Calendar, or in the information pamphlets published each semester by the Officeof the Registrar.Failure to file a Grade Replacement Contract will result in both the original and repeated grade being usedto calculate your overall grade point average. Undergraduates are eligible to exercise grade replacementfor only three course repeats during their career at UT Tyler; graduates are eligible for two gradereplacements. Full policy details are printed on each Grade Replacement Contract.The Census Date is the deadline for many forms and enrollment actions of which students need to beaware. These include: Submitting Grade Replacement Contracts, Transient Forms , requests to withhold directoryinformation, approvals for taking courses as Audit, Pass/Fail or Credit/No Credit. Receiving 100% refunds for partial withdrawals. (There is no refund for these after the CensusDate) Schedule adjustments (section changes, adding a new class, dropping without a “W” grade) Being reinstated or re-enrolled in classes after being dropped for non-payment Completing the process for tuition exemptions or waivers through Financial Aid5 of 7
Department of Mechanical EngineeringPhone: 1.903.566.7003Fax: 1.903.566.7148Uttyler.edu/engineering10. State-Mandated Course Drop PolicyTexas law prohibits a student who began college for the first time in Fall 2007 or thereafter from droppingmore than six courses during their entire undergraduate career. This includes courses dropped at another2-year or 4-year Texas public college or university. For purposes of this rule, a dropped course is anycourse that is dropped after the census date (See Academic Calendar for the specific date).Exceptions to the 6-drop rule may be found in the catalog. Petitions for exemptions must be submitted tothe Enrollment Services Center and must be accompanied by documentation of the extenuatingcircumstance. Please contact the Enrollment Services Center if you have any questions.11. Disability/Accessibility ServicesIn accordance with Section 504 of the Rehabilitation Act, Americans with Disabilities Act (ADA) and theADA Amendments Act (ADAAA) the University of Texas at Tyler offers accommodations to studentswith learning, physical and/or psychological disabilities. If you have a disability, including a non-visiblediagnosis such as a learning disorder, chronic illness, TBI, PTSD, ADHD, or you have a history ofmodifications or accommodations in a previous educational environment, you are encouraged to visithttps://hood.accessiblelearning.com/UTTyler and fill out the New Student application. The StudentAccessibility and Resources (SAR) office will contact you when your application has been submitted andan appointment with Cynthia Lowery, Assistant Director of Student Services/ADA Coordinator. For moreinformation, including filling out an application for services, please visit the SAR webpage athttp://www.uttyler.edu/disabilityservices, the SAR office located in the University Center, # 3150 or call903.566.7079.The University of Texas at Tyler has a continuing commitment to providing reasonable accommodationsfor students with documented disabilities. Like so many things this Fall, the need for accommodationsand the process for arranging them may be altered by the COVID-19 changes we are experiencing and thesafety protocols currently in place. Students with disabilities who may need accommodation(s) in orderto fully participate in this class are urged to contact the Student Accessibility and Resources Office (SAR)as soon as possible, to explore what arrangements need to be made to ensure access. During the Fall 2020semester, SAR will be conducting all appointments via ZOOM. If you have a disability, you areencouraged to visit https://hood.accessiblelearning.com/UTTyler and fill out the New StudentApplication. For more information, please visit the SAR webpage athttp://www.uttyler.edu/disabilityservices or call 903.566.7079.Student Absence due to Religious ObservanceStudents who anticipate being absent from class due to a religious observance are requested to inform theinstructor of such absences by the second class meeting of the semester.12. Student Absence for University-Sponsored Events and ActivitiesIf you intend to be absent for a university-sponsored event or activity, you (or the event sponsor) mustnotify the instructor at least two weeks prior to the date of the planned absence. At that time the instructorwill set a date and time when make-up assignments will be completed.13. Social Security and FERPA Statement6 of 7
Department of Mechanical EngineeringPhone: 1.903.566.7003Fax: 1.903.566.7148Uttyler.edu/engineeringIt is the policy of The University of Texas at Tyler to protect the confidential nature of social securitynumbers. The University has changed its computer programming so that all students have anidentification number. The electronic transmission of grades (e.g., via e-mail) risks violation of theFamily Educational Rights and Privacy Act; grades will not be transmitted electronically.14. Emergency Exits and EvacuationEveryone is required to exit the building when a fire alarm goes off. Follow your instructor’s directionsregarding the appropriate exit. If you require assistance during an evacuation, inform your instructor inthe first week of class. Do not re-enter the building unless given permission by University Police, Firedepartment, or Fire Prevention Services.15. UT Tyler Resources for StudentsUT Tyler Writing Center (903.565.5995), writingcenter@uttyler.eduUT Tyler Tutoring Center (903.565.5964), tutoring@uttyler.eduThe Mathematics Learning Center, RBN 4021, this is the open access computer lab for mathstudents, with tutors on duty to assist students who are enrolled in early-career courses.UT Tyler Counseling Center (903.566.7254)7 of 7
2. Schaum’s Outline of Fluid Mechanics and Hydraulics, 4th Edition (Schaum's Outlines) 4th Edition by Liu, Ranald and Evett 3. Student Solutions Manual and Study Guide, Fundamentals of Fluid Mechanics, 7th, Munson et al, Wiley, 2013. 4. Solving Problems in Fluid Mechanics Volume 1 by Douglas, 3rd ed , ELBS with Longman Optional References TBD
Fluid Mechanics Fluid Engineers basic tools Experimental testing Computational Fluid Theoretical estimates Dynamics Fluid Mechanics, SG2214 Fluid Mechanics Definition of fluid F solid F fluid A fluid deforms continuously under the action of a s
ISO 3310-2, BS ISO 3310-2. Test sieves with electroformed sieve foil in accordance with DIN ISO 3310-3, ASTM E 161 and ISO 3310-3. Sieving methods Haver test sieves are suitable for all common sieving methods: horizontal sieving, three-dimensional sieving, dry and wet sieving, air jet sieving and manual sieving. Haver & Boecker
Fluid Mechanics 63 Chapter 6 Fluid Mechanics _ 6.0 Introduction Fluid mechanics is a branch of applied mechanics concerned with the static and dynamics of fluid - both liquids and gases. . Solution The relative density of fluid is defined as the rate of its density to the density of water. Thus, the relative density of oil is 850/1000 0.85.
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and Bernoulli's Equation 7. General Energy Equation 8. Reynolds Number, Laminar Flow, Turbulent Flow and Energy Losses Due to Friction
Fundamentals of Fluid Mechanics. 1 F. UNDAMENTALS OF . F. LUID . M. ECHANICS . 1.1 A. SSUMPTIONS . 1. Fluid is a continuum 2. Fluid is inviscid 3. Fluid is adiabatic 4. Fluid is a perfect gas 5. Fluid is a constant-density fluid 6. Discontinuities (shocks, waves, vortex sheets) are treated as separate and serve as boundaries for continuous .
L M A B CVT Revision: December 2006 2007 Sentra CVT FLUID PFP:KLE50 Checking CVT Fluid UCS005XN FLUID LEVEL CHECK Fluid level should be checked with the fluid warmed up to 50 to 80 C (122 to 176 F). 1. Check for fluid leakage. 2. With the engine warmed up, drive the vehicle to warm up the CVT fluid. When ambient temperature is 20 C (68 F .
Chapter 06 Fluid Mechanics _ 6.0 Introduction Fluid mechanics is a branch of applied mechanics concerned with the static and dynamics of fluid - both liquids and gases. The analysis of the behavior of fluids is based on the fundamental laws of mechanics, which relate continuity of
2018 Accounting Higher Finalised Marking Instructions Scottish Qualifications Authority 2018 The information in this publication may be reproduced to support SQA qualifications only on a non-commercial basis. If it is reproduced, SQA should be clearly acknowledged as the source. If it is to be used for any other purpose, written permission must be obtained from permissions@sqa.org.uk. Where .
