HP LaserJet8100, 8100N, And 8100DN Printers GettingStarted .
EnglishCopyright 1998Hewlett-Packard Co.Printed in SingaporeManual Part No.C4214-90901Printed onRecycled Paper*C4214-90901**C4214-90901*C4214-90901HP LaserJet 8100, 8100 N,and 8100 DN PrintersGetting Started Guide
HP LaserJet 8100, 8100 N, and8100 DN PrintersGetting Started Guide
Copyright Hewlett-PackardCompany 1998All Rights Reserved.Reproduction, adaptation, ortranslation without prior writtenpermission is prohibited, exceptas allowed under the copyrightlaws.Publication numberC4214-90901Reorder numberC4214-99001First Edition, October 1998WarrantyTrademark CreditsThe information contained inthis document is subject tochange without notice.PostScript is a trademark ofAdobe Systems Incorporatedwhich may be registered incertain jurisdictions.Hewlett-Packard makes nowarranty of any kind withrespect to this information.HEWLETT-PACKARDSPECIFICALLY DISCLAIMSTHE IMPLIED WARRANTY OFMERCHANTABILITY ANDFITNESS FOR A PARTICULARPURPOSE.Hewlett-Packard shall not beliable for any direct, indirect,incidental, consequential, orother damage alleged inconnection with the furnishing oruse of this information.Arial, Monotype, and TimesNew Roman, are U.S. registeredtrademarks of the MonotypeCorporation.CompuServe is a U.S.trademark of CompuServe, Inc.Helvetica, Palatino, Times, andTimes Roman are trademarks ofLinotype AG and/or itssubsidiaries in the U.S. andother countries.Microsoft, MS Windows,Windows and Windows NT areU.S. registered trademarks ofMicrosoft Corporation.TrueType is a U.S. trademark ofApple Computer, Inc.ENERGY STAR is a U.S.registered service mark of theU.S. EPA.Hewlett-Packard Company11311 Chinden BoulevardBoise, Idaho 83714 U.S.A.
ContentsInstallation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Step 1 Prepare Printer Location . . . . . . . . . . . . . . . . . . . . . . . .3Step 2 Check Package Contents . . . . . . . . . . . . . . . . . . . . . . .5Step 3 Remove Internal Packaging . . . . . . . . . . . . . . . . . . . . .6Step 4 Locate Printer Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .7Step 5 Install Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Step 6 Install Toner Cartridge. . . . . . . . . . . . . . . . . . . . . . . . . .9Step 7 Load Trays 2 and 3 . . . . . . . . . . . . . . . . . . . . . . . . . . .11Step 8 Load Tray 1 (Optional) . . . . . . . . . . . . . . . . . . . . . . . .13Step 9 Attach Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . .15Step 10 Install or Change the Control Panel Overlay(Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Step 11 Configure the Control Panel Display Language(Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Step 12 Test the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Step 13 Connect Printer Cables . . . . . . . . . . . . . . . . . . . . . . .19Step 14 Install Printing Software . . . . . . . . . . . . . . . . . . . . . .22Step 15 Install Online User Guide . . . . . . . . . . . . . . . . . . . . .25Step 16 Install Ready Reference Guide Holder . . . . . . . . . . .29Step 17 Verify Printer Setup . . . . . . . . . . . . . . . . . . . . . . . . . .30ENContents iii
ivContentsEN
Printer SetupCongratulations on your purchase of the HP LaserJet 8100 seriesprinter! This printer is available in three configurations:HP LaserJet 8100 printerThe HP LaserJet 8100 printer comes standard with 16 MB RAM, wideformat printing, two 500-sheet trays, and a 100-sheet multipurposetray.NoteThe HP LaserJet 8100 requires an optional EIO card toconnect to a Macintosh.HP LaserJet 8100 N printerThe HP LaserJet 8100 N printer comes standard with 16 MB RAM,wide format printing, two 500-sheet trays, a 100-sheet multipurposetray, and an HP JetDirect 600N print server.HP LaserJet 8100 DN printerThe HP LaserJet 8100 DN printer comes standard with 24 MB RAM,wide format printing, two 500-sheet trays, a 100-sheet multipurposetray, an HP JetDirect 600N print server, and a duplexer (for printing onboth sides of paper).EN1
Installation ChecklistThis guide will help you set up and install the new printer. For properinstallation, please complete each section in order: Unpack the printerInstall the printerConnect the printer cablesInstall printing softwareInstall online user guideAttach holder for ready referenceguideVerify printer setupsteps 1-4steps 5-12step 13step 14step 15step 16step 17WARNING!The printer is heavy. HP recommends that four people move it.NoteTo learn about all the features and capabilities of the printer, see theprinter user guide and the help menus in the printer drivers (availableafter you install the printing software and online user guide).2Printer SetupEN
Step 1 Prepare Printer LocationPrinter Size46.75 in (1187 mm)35 in (889 mm)14.5 in(368 mm)13.75 in(350 mm)11.5 in(292 mm)11.5 in(292 mm)29.5 in (749 mm)HP LaserJet 8100 Printer Dimensions (Top and Side Views)ENPrepare Printer Location3
Location requirements for the printer A sturdy, level surface forplacement Adequate power supply Space allowance around theprinter A stable environment—noabrupt temperature or humiditychanges A well ventilated room Relative humidity 20% to 80% No exposure to direct sunlightor chemicals, includingammonia-based cleaningsolutions Room temperature 50 to 91 F(10 to 32.5 C)Printer Weight (without toner cartridge)4 HP LaserJet 8100 and 8100 N printers: 51 kg (112 lbs) HP LaserJet 8100 DN printer: 54 kg (120 lbs)Printer SetupEN
Step 2 Check Package ContentsPower CordControlPanelOverlayHolder for ReadyReference GuidePrinterTonerCartridgePrinter SoftwareCompact DiscPrinterDocumentationPackage ContentsNoteENA printer interface cable is not included in the package contents. Seethe printer user guide for ordering information.Check Package Contents5
Step 3 Remove Internal Packaging1NoteSave all packing material. You may needto repack the printer at a later date.WARNING!This printer weighs approximately 51 kg(112 lbs). HP recommends that fourpeople move it.231Remove all external packing tapefrom the printer.2Remove packing material fromstandard output bin and protectivefilm from display.3Open the top cover.4Remove packing material and tapeand close top cover.5Open the left-side door and removethe two packing spacers. Close thedoor.456Printer SetupEN
Step 4 Locate Printer PartsThe following illustrations give the location and names of theimportant printer parts.Printer Parts (front and rear views)12345ENFace-up BinControl PanelStandard Output BinAdjustable Paper StopTop Cover67891011Tray 1 (multipurpose)Tray 1 extensionsTray 1 paper width guidesTray 2Tray 3Power Switch12 Front Door13 Parallel Cable Connector14 HP Fast InfraRedConnect15 C-Link Connector16 Power Cord ConnectorLocate Printer Parts7
Step 5 Install AccessoriesInstall any accessories that you have purchased with the printer. Usethe installation instructions that are packaged with the accessories.DuplexerMultibin Mailbox (5-Binwith Stapler)MultibinMailbox (8-Bin)Envelope FeederHP Fast InfraRedConnect7-bin TabletopMailboxStand for 7-binTabletop Mailbox2 x 500-sheetInput Tray2000-sheetInput TrayPrinter StandOptional Accessories8Printer SetupEN
Step 6 Install Toner Cartridge11Open the printer’s top cover.2Remove the toner cartridge from itspackaging. (Save packaging forpossible cartridge storage.)NoteTo prevent damage to the tonercartridge, do not expose it to light formore than a few minutes.3Rotate the cartridge and gentlyshake it from side to side todistribute the toner evenly inside thecartridge.4Locate the sealing tape tab on theend of the cartridge. Carefully bendthe tab back and forth until itseparates from the cartridge.Continued on the next page.ENInstall Toner Cartridge9
5Firmly pull the tab straight out fromthe cartridge to remove the entirelength of tape. Avoid touching anyblack toner on the tape.NoteIf the tab separates from the tape, graspthe tape and pull it out of the cartridge.6NoteIf toner gets on your clothing, wipe it offwith a dry cloth and wash clothing in coldwater. (Hot water sets toner into fabric.)76Position the cartridge as shown withthe arrow pointing into the printer.7Slide the cartridge into the printer asfar as it will go.8Close the top cover.810Printer SetupEN
Step 7 Load Trays 2 and 312NoteThe paper size setting is set to a defaultsize at the factory. The default for theUnited States is letter-size, while inEurope it is A4. If you would like to use adifferent default paper size, reconfigurethe paper tray setting.1Open Tray 2 until it stops.2Remove the packing spacer andtape.3If you wish to load paper that isdifferent than the default size, turnthe paper guide to the mark thatindicates the size of paper you areloading.4Turn the paper guide to the lockedposition.5Adjust the left paper guide bypushing in, then lifting up and out.3Continued on the next page.45ENLoad Trays 2 and 311
66Position the guide over theappropriate lines marked in the tray.Press the guide into the rear slot andthen lower down into the front slot.Be sure the guide is not skewed.7Insert up to 500 sheets of paper intothe tray. Do not fill the input trayabove the paper fill marks on theguide7NoteFor single-sided printing, place the sideto be printed facing down. For doublesided printing, the front side should befacing up.88Make sure the paper size tab is setcorrectly.9Slide the tray back into the printer.If you wish to select your paper by typerather than tray (source), see your onlineuser guide.9If you wish to print on paper sizes largerthan letter or A4, adjust the paper stopguide on the Standard Output Bin. (Seeyour online user guide for instructions.)NoteIf paper curls or skews excessivelyduring printing, open the tray and turnthe stack of paper over. To avoid a paperjam, never open the tray while it is in use.12Printer SetupEN
Step 8 Load Tray 1 (Optional)1Tray 1 is a multi-purpose tray and holdsup to 100 sheets of paper or 10envelopes.Tray 1 provides a convenient way to printenvelopes, transparencies, custom-sizepaper, labels, or other types of mediawithout having to unload the other trays.CAUTIONTo avoid a paper jam, never add orremove paper from Tray 1 while theprinter is printing.To avoid damaging the printer, printlabels and transparencies from Tray 1only. Send them to the Top Output Bin,do not print them on both sides, andremove them promptly.NotePaper loaded in Tray 1 will be printed firstunless the Tray 1 setting is changed fromthe printer control panel. To change theorder in which trays will be printed from,see your online user guide.1Open Tray 1.2Pull out the tray extension, if neededfor the paper size you are printing.3Slide the paper width guides to theappropriate size marked on the tray.4Place paper into the tray withoutstacking it above the paperfill mark.Continued on next page.ENLoad Tray 1 (Optional)13
NoteFor single-sided printing, place paperinto the tray with the side-to-be-printedup. The top of the page (letterhead, forexample) should be placed toward therear of the printer. For two-sided printing,place paper with the front side down. Forprepunched paper, always load with theholes toward the rear of the printer.5Load letter or A4 paper with thelonger edge of the page leading intothe printer.6Load envelopes, Executive, Legal,11 x 17, ISO A3, JIS B5, or JIS B4with the short edge of the pageleading into the printer.NotePaper heavier than 28 lb (105 g/m2)should be printed from Tray 1 to theFace-up Bin to avoid curl.14Printer SetupEN
Step 9 Attach Power Cord123EN1Locate the power switch on the frontof the printer. Make sure the printeris turned off.2Connect the power cord to theprinter and a grounded power stripor an AC outlet.3Turn the printer on. After the printerwarms up, the READY messageshould appear on the control paneldisplay and the Ready light shouldremain on. If the READY messagedoes not appear, see the problemsolving chapter in the online userguide.READYAttach Power Cord15
Step 10 Install or Change the Control PanelOverlay (Optional)To change the overlay to a languageother than English:11Locate the overlay you wish to installand remove it from its bag.NoteMake certain the power switch is off.22Gently lift up on each side of theinstalled overlay.3Insert your thumbnail or a thin, rigidobject in front of the overlay andpress toward the back of the printer.Lift to remove.4To install the new overlay, position itover the control panel, rear-side first.5Snap the overlay firmly onto thecontrol panel. Ensure that theoverlay is flat.34516Printer SetupEN
Step 11 Configure the Control Panel DisplayLanguage (Optional)To configure the control panel to displaya language other than English:12LANGUAGE ENGLISH3LANGUAGE ENGLISH1Press and hold SELECT whilesimultaneously pushing the powerswitch ON. Hold SELECT until SELECTLANGUAGE appears, then releaseSELECT.2LANGUAGE ENGLISH will display.3Use the VALUE - and VALUE keys toselect the desired language.4Press SELECT to save your selection.The control panel display willindicate the printer is ready to use.NoteIf the new language does not appear inthe display, you may not have pressedSELECT to save your new selection.4LANGUAGE ENGLISHENConfigure the Control Panel Display Language (Optional)17
Step 12 Test the Printer1READYPrint a configuration page to make surethe printer is operating correctly.1Make sure the printer is on and theREADY message is displayed.2Press MENU until the display readsINFORMATION MENU.3Press ITEM until the display readsPRINT CONFIGURATION.4Press SELECT to print theconfiguration page.5The configuration page shows theprinter’s current configuration.2INFORMATION MENU3PRINTCONFIGURATIONNoteAn HP JetDirect network configurationpage will also print for the networkedprinters.4PRINTCONFIGURATION518Printer SetupEN
Step 13 Connect Printer CablesFor printers equipped with an optional HP JetDirect 600N PrintServer, a twisted-pair cable network connection is provided through a10/100Base-TX (RJ-45) connector. Connection to an Apple LocalTalknetwork is available through an optional LocalTalk card. The printeralso has a port for HP Fast InfraRed Connect.ParallelConnectorRJ-45ConnectorHP on of Interface PortsENConnect Printer Cables19
Connecting Parallel CableTo ensure reliability, use an IEEE-1284 bi-directional parallel cable.(These cables are clearly marked with “IEEE-1284.”) Only IEEE-1284cables support all of the printer’s advanced features.11Make sure the printer and yourcomputer are turned off.NoteThe cable should install easily. Ifinstallation is difficult, check the cableorientation.2Connect the parallel cable to theprinter parallel port. Press thelocking release levers in whileconnecting the cable.3Connect the other end of the cableto the proper connector on thecomputer.NoteSee your online user guide forinformation on ordering IEEE-1284parallel cables.3202Printer SetupEN
Connecting to Ethernet 10/100Base-TXNetworkUse the RJ-45 port to connect the printer to an Ethernet 10/100BaseTX network.CAUTIONMake sure the printer power is turned off before connecting to the RJ45 port.Ethernet 10/100Base-TX Network Interface Cable ConnectionEN Connect a twisted-pair network cable to the RJ-45 port on theHP JetDirect 600N Print Server. Connect the other end of the cable to the network.Connect Printer Cables21
Step 14 Install Printing SoftwareThe printer comes with printing software on a compact disc. Theprinter drivers on this compact disc must be installed to take fulladvantage of the printer features. If your computer does not have aCD-ROM drive, but you have access to one, you can copy the printingsoftware from the compact disc onto diskettes for installation on yourcomputer.If you do not have access to a CD-ROM drive, a diskette is providedwith the basic printer drivers. (The diskette does not have all of thesoftware available on the compact disc.) The most recent drivers areavailable on the Internet. Depending on the configuration of Windowsdriven computers, the installation program for the printer softwareautomatically checks the computer for Internet access to obtain thelatest software.See the HP Support pages at the front of the printer user guide andthe Readme file on the diskette for additional information or to orderdiskettes if you do not have Internet access.22Printer SetupEN
Installing Windows Printing Software (CD)For Windows 9x and Windows NT 4.01Close all running applications.2Insert the compact disc into the CD-ROM drive. (Depending onthe computer configuration, the installation program mayautomatically start.)3Click Start.4Click Run.5Type D:\SETUP (or the appropriate drive directory letter) in thecommand line box and click OK.6Follow the instructions on the computer screen.For Windows 3.1x and Windows 3.11*1Close all running applications.2Insert the compact disc into the CD-ROM drive.3In the Windows Program Manager screen, click the File menu.4Click Run.5Type D:\SETUP (or the appropriate drive directory letter) in thecommand line box and click OK.6Follow the instructions on the computer screen.Installing Network SoftwareNoteIf the printer is to be used on a network, install and configure thenetwork operating system software on the network administrator’ssystem before individual users install the printing software.1Select a Custom install to install the printing system software. Besure to install the HP JetAdmin software.2Use HP JetAdmin to configure the HP JetDirect print server andthe printer for your network. You also can use HP Web JetAdminto configure your printer with your web browser. For informationon using HP Web JetAdmin, see HP’s web site at http://www.hp.com* Includes only PostScript Level 2 Emulation (or Level 1 Emulationfor Windows 3.1x) and FontSmart.ENInstall Printing Software23
Installing Macintosh Printing Software241Quit all open applications.2Insert the compact disc into the CD-ROM drive.3Double-click the Installer icon and follow the instructions on thescreen.4Open the Chooser from the Apple menu.5Click the Apple LaserWriter icon. If the icon is not there, contactyour Macintosh dealer.6If you are on a network with multiple zones, select the zone in theAppleTalk Zones box where the printer is located. If this isunknown, ask your network administrator.7Double-click the desired printer. An icon should appear.8Close the Chooser by clicking the Go-Away (Close) box in theupper left corner.Printer SetupEN
Step 15 Install Online User GuideThis printer comes with a CD-ROM that contains an online userguide. In fact, it contains copies of the user guide translated in manylanguages. The user guide contains useful information for using theHP LaserJet 8100 series printers, as well as additionaltroubleshooting and customer support information. This user guiderequires Adobe Acrobat Reader 3.0 (or later versions) for viewing. Ifthe system to which the printer is connected already has AdobeAcrobat Reader installed, skip step 1 and go to step 2 of theinstallation process.Step 1: Installing Adobe Acrobat ReaderTo install Acrobat Reader on Windows 9x/NT 4.01Place the CD-ROM that contains the online user guide in the CDROM drive.2Launch Windows Explorer, and open the x:\acrobat\win95 ntfolder (where “x” is the letter corresponding with the CD-ROMdrive).3Open the folder for the language version of Acrobat Reader youwant to install. The directory contains a single executable file witha .exe extension.4Double-click the executable file. The application installer appears.5Follow the instructions in the installer to complete the applicationinstallation.To install Acrobat Reader on Windows 3.xEN1Place the CD-ROM that contains the online user guide in the CDROM drive.2Launch File Manager, and click the CD-ROM drive icon.3Open the acrobat\win3.x directory.4Open the directory for the language version of Acrobat Readeryou want to install. The directory contains a single executable filewith a .exe extension.5Double-click the executable file. The application installer appears.6Follow the instructions in the installer to complete the applicationinstallation.Install Online User Guide25
To install Acrobat Reader on Macintosh1Place the CD-ROM that contains the online user guide in the CDROM drive.2Double-click the CD-ROM icon.3Open the Mac folder, then the folder for the language version ofAcrobat Reader you want to install.4Expand the .hqx file and double-click Reader 3.01 Installer.5Follow the instructions in the installer to complete the applicationinstallation.6Once the system restarts, create an alias for Acrobat Reader onthe desktop.Step 2: Installing the User GuideThis procedure copies the files for the user guide onto the systemhard disk. To run the user guide from the CD-ROM only, skip this stepand go to step 3.To install the user guide on Windows 9x/NT1In Windows Explorer, create a folder titled hp8100 in the rootdirectory (typically labeled drive C:) .2Place the CD-ROM that contains the online user guide in the CDROM drive.3In Windows Explorer, select the CD-ROM drive. The content filesfor each language version appear in the folder.4Right-click the language version of the user guide you want toinstall, and select Copy from the popup menu.5Select the x:\hp8100 folder (where “x” is the letter correspondingwith the system hard disk).6Right-click in the right pane of Windows Explorer, and selectPaste from the popup menu.To install the user guide on Windows 3.x261In File Manager, create a folder titled hp8100 in the system rootdirectory (typically labeled drive C:).2Place the CD-ROM that contains the online user guide in the CDROM drive.Printer SetupEN
3Double-click the CD-ROM drive icon. The content files for eachlanguage version appear.4From the Windows menu, select Tile.5In the CD-ROM drive window, click the language version of theuser guide you want to install, and drag it to the x:\hp8100directory.To install the user guide on Macintosh1Place the CD-ROM that contains the online user guide in the CDROM drive.2Double-click the CD-ROM icon.3Copy the language version of the user guide you want to thedesktop.Step 3: Running the User GuideFor Windows users only—The easiest way to access the user guideis to create a shortcut on your desktop (for Windows 9x/NT) or anicon in a program group (in Windows 3.x). You can then launch theuser guide by simply double-clicking the shortcut or icon. Refer to theWindows online help for information on these tasks.To run the user guide on Windows 9x/NT1From the Start menu, select Adobe Acrobat, then AcrobatReader. Acrobat Reader launches.2From the File menu, click Open.3Open the directory or drive where the user guide file resides. (Forinstalled files, the path is x:\hp8100\ filename .pdf, where “x” isthe letter corresponding with the system hard disk. For files onthe CD-ROM, the path is x:\ filename .pdf, where “x” is the lettercorresponding with the CD-ROM drive.)4Select the file, and click OK.To run the user guide on Windows 3.xEN1In the Adobe Acrobat program group, double-click the AcrobatReader icon. Acrobat Reader launches.2From the File menu, click Open.3Open the folder or drive where the user guide file resides. (Forinstalled files, the path is x:\hp8100\ filename .pdf, where “x” isInstall Online User Guide27
the letter corresponding with the system hard disk. For files onthe CD-ROM, the path is x:\ filename .pdf, where “x” is the lettercorresponding with the CD-ROM drive.)4Select the file, and click OK.To run the user guide on Macintosh128Printer SetupDrag the user guide icon onto the Acrobat Reader icon.EN
Step 16 Attach Holder for Ready Reference GuideCAUTIONThe Document Holder will be very difficult to remove once it is mounted;therefore, damage to the Document Holder or the mounting surfacemight occur during removal.The Document Holder can be mounted on any flat, smooth surface.For example, mount the Document Holder on the exterior of a printerwhere the Document Holder does not span across two panels anddoes not obstruct cooling vents, access doors, or installedaccessories (including those that might be installed in the future).EN1Clean the mounting surface with the alcohol wipe included in thepackage.2Once the mounting surface is dry, peel the tape off of the fouradhesive strips located on the back of the Document Holder.3Position the Document Holder so that the open side is on top andthe adhesive strips are lightly touching the mounting surface.4Press firmly on the Document Holder and apply even pressure toall of its corners for at least one minute to give the adhesive timeto bond to the mounting surface.5Insert the printer’s Ready Reference Guide into the DocumentHolderAttach Holder for Ready Reference Guide29
Step 17 Verify Printer SetupThe easiest way to verify that the installation has been completedsuccessfully is to print a document from a software application.1Open a software application of your choice and open or create asimple document.2Make sure the correct printer name appears.3Print the document.If the document prints, installation is complete. If nothing prints or ifthe document does not print correctly, see the problem solvingchapter in the printer’s online user guide.Congratulations, the printer setup is complete!30Printer SetupEN
ENVerify Printer Setup31
32Printer SetupEN
EnglishCopyright 1998Hewlett-Packard Co.Printed in USAManual Part No.C4214-90901Printed on at least50% Total Recycled Fiber withat least 10% Post-Consumer Paper*C4214-90901**C4214-90901*C4214-90901HP LaserJet 8100, 8100 N,and 8100 DN PrintersGetting Started Guide
WARNING! The printer is heavy. HP recommends that four people move it. Note To learn about all the features and capabilities of the printer, see the printer user guide and the help menus in the printer drivers (available after you install the printing software and online user guide). Unpack the printer steps 1-4 Install the printer steps 5-12
printer! This printer is available in three configurations: HP LaserJet 8100 printer The HP LaserJet 8100 printer comes standard with 16 MB RAM, wide format printing, two 500-sheet trays, and a 100-sheet multipurpose tray. Note The HP LaserJet 8100 requires an optional EIO card to connect to a Macintosh. HP LaserJet 8100 N printer
LJ 8000N, LJ 8000DN, LJ 8100, LJ 8100N, LJ 8100DN. Or, see the HP LaserJet Quick Reference Service Guide, volume I. It provides support for the following printers: LJ 6L, LJ 5Si Mopier, LJ 5Si, LJ 5Si MX, LJ 5L, LJ 6P, LJ 6MP, LJ 5P, LJ 5MP,
HP LaserJet 8000 / 8000N / 8000DN Lexmark Optra N LASCEMXC Ea 86731795 HP LaserJet 8100 HP LaserJet 8100 / 8100DN / 8150DN LASCE8100C Ea 86540239 IBM / Lexmark / Optra R / 4049 Lexmark / IBM Optra L / LXI / R
Jack and HALO Michael and COOPER Michael and SIRI McAllister and ARTY Declan and NOBLE . Aaron and QUINCY Eric and LEX Michael and VOCO Mikayla and SAFFRON Guinevere and SOLSTICE Jannette and SAPPHIRE James and NINJA Kimberly and WAGS Molly and MATER Justin and WENDELL Elliot and U
w and z and . w and @ and .! and s and .! and f and . [and x and . [and and . v and c and . J. Circle one letter in each group that has some major difference with the remaining letters. Describe the difference. 1. t n m k Difference: 2. l q Difference: 3. x # ! Difference:
Aug 13, 2020 · FT. FBR KIP ADJACENT SPANS FT. FBR KIP 30 and 35 46.78 35 and 35 47.26 30 and 40 48.07 35 and 40 48.59 30 and 45 49.08 35 and 45 50.76 30 and 50 51.25 35 and 50 52.97 30 and 55 54.06 35 and 55 55.79 30 and 60 57.25 35 and 60 58.98 30 and
Hamed, Ashraf N. E. and Schmitz, Roland and Bergermann, Anja and Totzke, Frank and Kubbutat, Michael and Müller, Werner E. G. and Youssef, Diaa T.A. and Bishr, Mokhtar M. and Kamel, Mohamed S. and Edrada-Ebel, RuAngelie and Wätjen, Wim and Proksch, Peter (2018) Bioactive py
FoNS guidelines for writing a final project report July 2012 1 Guidelines for writing a final project report July 2012 FoNS has a strong commitment to disseminating the work of the project teams that we support. Developing and changing practice to improve patient care is complex and we therefore believe it is essential to share the outcomes, learning and experiences of those involved in such .
