L19LD1600 Series Quick Start Guide - EN-R1
Home & Business SecurityL19LD1600 SeriesQuick Start GuideWWW.LOREXCCTV.COMInformation in this document is subject to change without notice. As our products aresubject to continuous improvement, Lorex Technology and our subsidiaries reserve theright to modify product design, specifications and prices, without notice and withoutincurring any obligation. E&OE 2008 LOREX. All rights reserved.
Timeunder 15 minutesunder 30 minutesPACKAGE CONTENTS, INSTALLATION GUIDE, NAVIGATION & CONTROLSunder 60Time Hand ToolsInstallation Guideunder 15 minutesSTEP 1under 30 minutesHand ToolsTimeunder 60 minutesTimeHardwareToolsover 60 minutesHardwareRouterSkill Level Hi SpeedSkills - Easyunder 15 minutesunder 30 minutesunder 60 minutesover 60 minutesTimeUnder 10 Minutes** Installation time may vary based onapplication and camera cablingunder 15 minutesTimeunder 60 minutesHardwareHardwareHand ToolsPACKAGE Contents:under 15 minutesSkills - Intermediate*Number of cameras and hard drive capacity may vary byHandmodel.ToolsCheck your package for specific content information.Hardwareunder 30 minuteseasyHand ToolsRIGHT BUTTON Double click inviewing mode todisplay camera infull screen. Click to open/exiteasythe MouseMENUin Viewing Mode.IntermediateSCROLL WHEEL Used to increasevalues in theMENU mode. ATTENTION:Check PagesL19LD1600 Series Quick Set-Up Guide R19-10over 60 minutes*Number of channels,cameras and hard drivecapacity may vary bymodel. Check yourpackage for specificcontent information.Skills - Advancedadvanced Hi SpeedRouterComputer &Router*easyover 60 minutesIntermediateBasic advancedComputer Skills,Router Port Forwarding* Minimum System Requirement: Windows XP, Pentium IV,256MB Ram (512MB Recommended), 200MB Storage, Internet,DSL or Cable ModemHi E CONTROL:Broadband Routerand Computers arerequired for local andremote monitoring(not included).under 60 minutesSkill LevelHardwareSkill Level ATTENTION:Plug & Play connectors, advancedHardwareOn screen set HiupSpeedRouterRouterLEFT BUTTONover 60 minutes* Minimum System Requirement: Windows XP, PentiumIV, 256MB Ram (512MB Recommended), 200MB Storage,Internet, DSL or Cable ModemeasyMOUSE:under 60 minutesIntermediateHand Tools60 Minutes* Installation time may vary basedon application Skill Levelunder 60 minutesadvancedunder 30 minutesSTEP 3under 30 minutesRouterIntermediateComputer &easyRouter** Installation time mayvary based onSkillapplicationLevelRECOMMENDEDFOR EASY USE ANDNAVIGATIONover 60 minutesRouterUnder 30 Minutes*TimeIntermediateSkill Level Hi Speedunder 15 minutesTime2 - AAA BatteriesTime1 - Software CD1 - User’s Manual1 - Software Manual1 - Quick StartunderGuide15 minutesHi SpeedTimeeasy1 - 19” 16 Channel LCD DVR withpre-installed HDD1 - Power Adaptor1 - 10 ft Ethernet Cable1 - PS2 Mouse1 - Remote ControlHardwarePlug & Playeasyconnectors, Onscreen set upSkill Levelunder 30 minutesSTEP 2RouterHand ToolsHand ToolsadvancedRECOMMENDEDFOR USE FROM ADISTANCE1. MENU2. NUMBER KEYPAD3. SEQUENCE MODE4. FREEZE5. 4S BUTTON6. 9S BUTTON7. NAVIGATION CONTROLS / ENTER8. REC BUTTON9. NAVIGATION CONTROLS10. SEARCH BUTTON11. DISPLAY MODE12. P/T MODE13. AUDIO CHANNEL SELECT14. PIP MODE15. 16S16. STOP17. NEXT18. VOL /- INSTRUCTIONS:For detailed setupinformation, pleaserefer to your User’smanual. SOFTWAREREQUIREMENTS:For Lorex Client Softwarerequirements, please referto Lorex Client Manual.
STEP 1 - SET UP YOUR MONITOR FIRST1 CONNECT CAMERAS TO THE SYSTEM:Connect the first camera to the CH1 input. Follow the same steps to connect theadditional cameras.1. Connect the Female BNC end of the supplied 60’ extension cable to the camera.Connect the male Power end of the extension cable to the camera.2. Connect the Female end of the supplied 60’ extension cable to an open BNCcamera input on the back of the System. Connect the female Power end of theextension cable to one of end of the power adaptor.IMPORTANT NOTE: The ends of the extension cable are NOTthe same - one end has a Male power port, and the other hasa Female power port. Before permanently running the CameraExtension Cable, make sure that the cable has been orientedbetween the Camera and the unit correctly.2CONNECT ETHERNET CABLE:Connect one end of the ethernet cable to one of the router’s (not included) LANPORTS and the other end to Monitor’s Network Port located at the bottom of themonitor. See picture below showing a generic LAN/WAN connection.LAN (LOCAL AREA NETWORK)BACK OF THE ROUTER SHOWNTO YOUR COMPUTER35TO YOUR MONITORCONNECT THE MOUSE:Connect the the Mouse included with your system to the PS2 port of the monitor. 4WAN (WIDEAREA NETWORK)MOUSE CONTROLAVAILABLECONNECT POWER CABLE:Connect one end ofthe Power adaptorto the monitor, theother end to anelectrical outlet.Note: Turn ONthe Master PowerSwitch at the backof the system.MASTER POWER BUTTONYour system willperform a SystemCheck once theMASTER powerbutton at the backof the system isturned ON.SET THE TIME AND DATE:1. Press the MENU button from the Front Panel of the Monitor (or Remote Control), or use theMouse and Click the Menu Icon.2. DVR LOG IN screen appears. Press ENTER.Note: USER ID BY DEFAULT IS ADMIN. Password is numeric and not necessarily needed forinitial MENU setup. Press ENTER to enter the MAIN MENU.3. On the MENU screen select CONFIGURATION and click ENTER.4. Select TIME AND DATE SETUP to set your local time5. Press MENU button repeatedly to exit this screen.Congratulations! You have completed Step 1 successfully. You can now view, recordand playback images on your monitor.L19LD1600 Series Quick Set-up Guide R1After you seecamera imageson your monitorscreen, removethe protective filmfrom camera(s)and monitorscreen.Make sure thatthe Date and Timeare set prior torecording.
STEP 2 - SET UP LOCAL VIEWING ON YOUR PCRETRIEVE SYSTEM INFORMATION:11. Access the Main Menu Setup screens, and navigate to the SYSTEMMENU - EXTERNAL DEVICE - TCP/IP SETUP - IP CONFIG SETUP option.2. Record the MAC Address of your system. This information is NECESSARYfor the DDNS Setup process.3. Confirm that the DHCP MODE is set to AUTOMATIC. This will allow yoursystem to lease an IP ADDRESS from your router. If the system is not set toAUTOMATIC, change the setting in the DHCP SETUP menu and clickDETECT IP.4. The IP PORT is 50000 by default.*Your system MUST be connected toa Router prior to powering it ON.IP ADDRESS:.RECORD THE IP AND MAC ADDRESSES IN THE SECTION BELOW:.NOTE: The system will lease networkinginformation from your Router. If you wishto set your information manually, thenset the DHCP MODE to MANUAL. Pleaseconsult your Hardware Manual for furtherMenu options.MAC ADDRESS:(Required for DDNS registration)INSTALL SOFTWARE:2(on your local computer)Insert the Lorex Software CD into your local computer’s CD ROMdrive and proceed with the installation.3LOREX INTERNET REMOTE SOFTWARE (IRS):1(on your local computer)Follow the installation screens to complete Lorex Internet Remote(ISA) Software installation.24345LOREX INTERNET REMOTE SOFTWARE (IRS):(on your local computer)Close the CD Menu Screen. A Lorex Internet Remote Software (IRS) iconwill appear on your desktop.RUN THE LOREX CLIENT 5.0 SOFTWARE:(on your local computer)Double-click the Lorex Internet Remote Software (IRS) icon on your desktop torun the program. From the main screen, click LOREX CLIENT 5.0L19LD1600 Series Quick Set-Up Guide R1
STEP 2 - SET UP LOCAL VIEWING ON YOUR PC (continued)5SET-UP:(on your local computer for local viewing)Click the Setup button from the Lorex Client 5.0 Software Screen.6Lorex Client 5.0 Remote Access Setup(on your local computer for local viewing):1. Select the IP/PORT Tab.2. Click MANUAL (for local viewing).3. NAME: Enter a name for the system. E.g. Office4. ADDRESS: Add the IP address recorded earlier at Step 2 - 15. Port: By default is set to 500006. User Id: By default is admin7. Password: Leave it blank8. Press SAVE to add the system name you have created.7VIEW CAMERAS LOCALLY:(on your local computer for local viewing):From the Lorex Client 5.0 software - local configuration screen (as shown in the picture), press the Connect button to connect to Local Live site to view your cameras.Congratulations! You have completed Step 2 successfully.You can now view and playback images on your localcomputer over the Local Area Network (LAN).L19LD1600 Series Quick Set-up Guide R1
STEP 3 - SET UP INTERNET REMOTE SECURITY MONITORING1PORT FORWARD YOUR ROUTER:Port forward your router first before proceeding with the set-up (port50000).All routers are different. To port forward your router, please refer toyour router’s user manual.A router configuration guide is available on your Lorex Client SoftwareCD and also on www.lorexcctv.com/support in the Consumer’s GuideSection.2DDNS SET-UP:3DDNS REGISTRATION:Open your web browser (Internet Explorer by default) and enterhttp://www.lorexddns.com in the address bar.Select the REGISTER option from the list on the left side of thescreen.4CREATE NEW USER INFORMATION:Complete the NEW USER fields with your personal information: USER NAME - Enter the desired User Name for connection. USER PASSWORD / CONFIRM PASSWORD - Enter and confirm apassword for the connection.NOTE: The username and password provided are NOT the same as the ADMIN/PASSWORD on the System. These credentials are used for yourspecific connection to your unit. EMAIL - Enter your Email Address.Press the OK button to save the settings.A Successful Registration window will appear.L19LD1600 Series Quick Set-Up Guide R1
STEP 3 - SET UP INTERNET REMOTE SECURITY MONITORING (continued)5LOGIN:Once the account has been created, you will need to login using yourcredentials (as set in step 4).Once the Username and Password have been entered, press the LOG IN button toaccess the Configuration Menu.6ADD DVR:Select the ADD DVR link from the top of the page.The DVR Setup screen will appear: DVR NAME - Enter the desired name for your System (e.g.MyBusiness) to a maximum of 20 numbers and letters. MAC ADDRESS - Enter the MAC Address from the system (as retrievedfrom the System Information in the IP & MAC Address section on page 4). TheMAC Address is 12 characters with no spaces or dashes. Select the Dual Codec (19” 16CH LCD Combo) option IP ADDRESS & PORT - This information can be left blank - the DDNS Servicewill access your unit based on the MAC Address.Press OK to save the settings. Once the settings are saved, the configuration willappear in your DDNS List. This configuration can now be added to the System.7ENTER DDNS SET-UP ON YOUR MONITOR:Access the Main Menu Setup screens, and navigate to the SYSTEM MENU- EXTERNAL DEVICE - TCP/IP SETUP - DDNS SETUP option.L19LD1600 Series Quick Set-up Guide R1
STEP 3 - SET UP INTERNET REMOTE SECURITY MONITORING (continued)89ENABLE DDNS SETTINGS: Set the DDNS ENABLE to ON Click on REGISTER to connect to the DDNS server and register the system informationThe following will automatically complete after clicking the Register option: DNS SERVER - Confirm that the IP address is set to 202.133.244.128 INTERVAL - Set an interval for the DVR to auto-update its IP address to DDNS server (Ddays / H- hours / M- minutes). Default : D-00 H-00 M-20, update every 20 minutes. REGISTER - Connect to the DDNS server and register the DVR information to DDNS database DNS STATUS - Indicates the current status of DDNS connection. IP ADDRESS - Indicates the local IP address assigned by the router (the internal IP address ofyour system). IP PORT - Indicates the current port number in the system (50000 by default). REMAIN TIME - Indicates the remaining time until the System next updates the IP address withthe DDNS Service. LAST REGISTRATION DATE - Indicates the last successful date and time that an updateoccurred. To save the changes and exit , click on the MENU button.Lorex Client Remote Access Setup:The remote connection information needs to be added to the Lorex Client software to allowfor a remote connection (using DDNS).1. Load the Lorex Client Software. Click on SETUP to add the configuration.2. The Remote Viewer Setup window will load to the IP/PORT Tab. Click on the DDNS button (allsettings will be greyed out) and click the DDNS tab.MyBusiness3. On the DDNS tab, enter your DDNS Information as follows: USER NAME - Enter the user name you configured on the DDNS Website (default is set toGROUP as an example, and can be deleted). DVR NAME - Enter the DVR name you configured on the DDNS Website. USER ID - Enter the DVR user ID (admin by default) PASSWORD - By default is blank4. Click the SAVE Button to accept the settings.5. Click on the GET IP button to retrieve the IP Address and Port Number from the DDNS Server.7. Press OK to save the settings, and close the configuration window.10VIEW CAMERAS REMOTELY:Click the CONNECT button to remotely access your System.Remote Viewing with Internet Explorer: Video from the System can be viewed using the Internet Explorerinterface (for remote viewing and backup). All Remote functionality through the Internet Explorerinterface is provided at http://www.lorexddns.com. For more information, please refer to Lorex ClientSoftware Manual.Congratulations! You have completed Step 3 successfully. You can now view andplayback images on your remote computer over the Internet.L19LD1600 Series Quick Set-Up Guide R1
recommended tips LOCATE MONITOR CONNECTIONS:Tilt the monitor UP to loacte yourmonitor’s connections.FUNCTION ICONS - AVAILABE FOR USE ONLY THROUGH A MOUSERight click to open mousecontrol interface.L19LD1600 Series Quick Set-up Guide R1The corresponding functionsfor mouse buttons pleaserefer to the following chart.
10recommended tips (continued)HDD Installation:The System comes with a pre-installed Hard Drive in theremovable hard drive bay. The system can support up to 2 harddrives ( max 750GB each ), one in the removable bay and oneinternally.NOTE: Make sure that the System is OFF and the power cable hasbeen disconnected before changing the Hard Drive. For detailedinstructions, check your user’s manual included with the system.Please refer to the system’s user manual for HDD formatting and installation.TIP ON CAMERA MOUNTING:Note: Test the cameras prior to selecting a permanent mountinglocation by temporarily connecting the Cameras and Cables toyour System.TIP ON REMOTE VIEWING AND PLAYBACK:NOTE: You must have an active high speed internet connectionto the System to be able to perform Remote viewing or playback.Remote access is dependant on your connection speed, internettraffic and other network factors - the speed is normally 1 2 FPS(frames per second).For faster remote viewing over the internet we recommend usingthe H.264 Viewer (see page 11). H.264 compression providessmaller file sizes resulting in a higher speed over the internet.For faster playback, it is recommended to download previouslyrecorded video using the backup function and play it back usingBackup Player Software - refer to the user manual for details.Regardless of the network playback speed, video is beingrecorded on your system in real time, and can be viewed whenyou are at the system or through the backup player.L19LD1600 Series Quick Set-Up Guide R1
Lorex internet remote software (irs)111234561. Lorex CLIENT 5.0Remote monitoring software recommended for local area network (LAN) - View, Playback and Record.2. Lorex backupUse this software to create a backup of your recorded data from a remote location.3. Lorex player 5.0Use this software to playback data that has been backed up either from the system using a USBthumbdrive or from the backup software.4. Lorex remote setupUse this software to configure the system remotely (e.g. change recording settings or schedules).5. Lorex IRS setupSetting up IRS is necessary in order to use the H.264 Viewer.6. Lorex H.264 VIEWERRemote monitoring software recommended for Internet Remote Monitoring. H.264 video compressiontechnology allows for efficient data transfer over the internet. You can view your system remotely whileconsuming less bandwidth.L19LD1600 Series Quick Set-up Guide R1
12 product supportIt’s all on the Webwww.lorexcctv.comFor detailed setup information, please refer to your User’s Manual. Foradditional information about determining your IP address, configuring your router,and port forwarding, please visit our website www.lorexcctv.com/support andclick Consumer Guides Section or view guides from the Lorex Client Software CDincluded with your system.Product SUPPORT Specification SheetUser’s ManualLorex Client Software ManualQuick Start GuidePort forwarding GuideBasics of Remote VideoAccess GuideEmail Support: support@lorexcorp.comToll Free Technical Support - North America: 1-888-42 LOREX (1-888-425-6739)Toll Free Technical Support - International (outside of North America): 00-800-425-6739-0quick set-up guideuser’s manualLorex International Website - www.lorexinternational.comfaqL19LD1600 Series Quick Set-Up Guide R1
L19LD1600 Series Quick Set-up Guide R1 STEP 2 - SET UP LOCAL VIEWING ON YOUR PC (CONTINUED) click the setup button from the Lorex client 5.0 software screen. SET-UP: (on your local computer for local viewing) 1. select the ip/port tab. 2. click manuaL (for local viewing). 3. name: enter a name for the system. e.g. office
4.1 Quick Start Tutorial When Collect is opened for the first time, the Quick Start tutorial is displayed. Quick Start is a series of five screens that provide a summary review of the main capabilities of the app. Tap the Forward icon to move through the Quick Start screens. Tap Start to open the app after finishing with the Quick Start screens .
SMB_Dual Port, SMB_Cable assembly, Waterproof Cap RF Connector 1.6/5.6 Series,1.0/2.3 Series, 7/16 Series SMA Series, SMB Series, SMC Series, BT43 Series FME Series, MCX Series, MMCX Series, N Series TNC Series, UHF Series, MINI UHF Series SSMB Series, F Series, SMP Series, Reverse Polarity
CorelDRAW Home & Student Suite 2018 Quick Start Guide Author: Corel Keywords: CorelDRAW Home & Student Suite 2018 quick start guide; quick start guide; CorelDRAW Home & Student Suite 2018 Getting Started Created Date: 4/29/2020 7:51:12 AM
5,,. M e. 3 Quick-Start Guide GreatCall Touch3 . Microphone - picks up your voice loud and clear while on a phone call Power Connector - allows you to charge your Touch3 with the provided Wall Charger and USB Cable. 8 Quick-Start Guide Quick-Start Guide Turning your Phone On and Off
examples used herein apply to Ignite for SQL Server. There is another Quick Start Guide available Oracle, DB2 / LUW, and Sybase at www.confio.com. The Quick Start Worksheet For the best results, be sure to record your results at each step of Quick Start process. Use the
Cisco TelePresence Profile Series Codec C-Series Quick Set C20 SX20 Quick Set MX200 MX300 TC 7.2. 2 D1458220 Benutzerhandbuch Deutsch Cisco TelePresence Profile Series, Codec C-Series, Quick Set C20 SX20 Quick Set, MX200, MX300 Herausgegeben: Oktober 2014 für TC7.2 Alle Inhalte 2010–2014
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide 78-16262-04 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Contents Cisco One-Year Limited Hardware Warranty Terms, page 1-2 † Locate the Product Serial Number, page 1-3 † Before Installation, page 1-3
hubungan antara asupan asam folat dengan kadar Hb dengan nilai p 0,64. Kata Kunci : asupan fe, asupan folat, kadar hb, tb paru . Abstract . Tuberculosis pulmonary can lead to various metabolic disorders and system disturbances in the body, one of which is synthetic disorder of Hemoglobin levels. Some nutrients which can influence the synthetic of Hemoglobin levels are iron (Fe) and folic .
