Models 244EH And 244ER PC-Programmable Temperature .
00809-0100-4737EnglishRev. EAModels 244EH and 244ERPC-Programmable TemperatureTransmittersProductDiscontinued
ProductManualModels 244EH and 244ERPC-ProgrammableTemperature TransmittersNOTICERead this manual before working with the product. For personal and system safety, andfor optimum product performance, make sure you thoroughly understand the contentsbefore installing, using, or maintaining this product.Within the United States, Rosemount Inc. has two toll-free assistance numbers:Customer CentralTechnical support, quoting, and order-related questions.1-800-999-9307 (7:00 am to 7:00 pm CST)North American Response CenterEquipment service needs.1-800-654-7768 (24 hours—includes Canada)Outside of the United States, contact your local Rosemount representative.The products described in this document are NOT designed for nuclear-qualifiedapplications. Using non-nuclear qualified products in applications that requirenuclear-qualified hardware or products may cause inaccurate readings.For information on Rosemount nuclear-qualified products, contact your local RosemountSales Representative.Rosemount Models 244EH and 244ER Smart Temperature Transmitters may be protected by one or moreU.S. Patents pending. Other foreign patents pending.Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.Noryl and Lexan are registered trademarks of General Electric.Microsoft, Windows, Windows 95, and Windows NT are registered trademarks of Microsoft Corp.MINIGRABBER is a trademark of Pamona Electronics.WAGO is a registered trademark of Kontakttechnik GmbH.Cover photo: 644-244C901Rosmeount Inc.8200 Market BoulevardChanhassen, MN 55317USATel 1-800-999-9307Fax (952) 949-7001PRINTINU. S. A.Fisher-RosemountSingapore Pte Ltd.1 Pandan CrescentSingapore 128461Tel (65) 777-8211Fax 65 777-0947AP.RMT-Specialist@frco.comED Rosemount Inc., 2000Fisher-Rosemount LimitedHeath PlaceBognor RegisWest Sussex PO22 9SHEnglandTel 44 (1243) 863 121Fax 44 (1243) 867 5541 00809-0100-4737f 00809-0100-4737 Rev EA 10/00Fisher-Rosemountsatisfies all obligationscoming from legislationto harmonise productrequirements in theEuropean Union.Product documentation available at.www.rosemount.com
Table of ContentsSECTION 1IntroductionSafety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Transmitter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Manual Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3SECTION 2InstallationSafety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Tools needed for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3Special Mounting Considerations . . . . . . . . . . . . . . . . . . . . . 2-4Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5Configuration Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9Model 244EC Configuration Interface . . . . . . . . . . . . . . . . 2-11Field Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12Sensor Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13Failure Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16Changing Switch Positions . . . . . . . . . . . . . . . . . . . . . . . . . 2-16SECTION 3OperationSafety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Surges/Transients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Configuring a Single Transmitter . . . . . . . . . . . . . . . . . . . . . 3-3Configuring Several Transmitters Identically . . . . . . . . . . . . 3-4Viewing the Process Variable . . . . . . . . . . . . . . . . . . . . . . . . 3-5Intermittent Sensor Algorithm . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Case Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6Intermittent Sensor Algorithm and Damping. . . . . . . . . . . . . 3-7Intermittent Sensor Detect (Advanced Feature). . . . . . . . . . . 3-8Implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9SECTION 4Maintenance andTroubleshootingSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Model 244EH software version 5.5.1 . . . . . . . . . . . . . . . . . . 4-11
Rosemount Models 244EH and 244ER PC-Programmable Temperature TransmittersAPPENDIX AReference DataTransmitter Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Functional. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Model 244EC Configuration Interface . . . . . . . . . . . . . . . .Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ordering Flameproof and Explosion-proof Approvalsfor Temperature Assemblies . . . . . . . . . . . . . . . . . . . . . . . .Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Enclosure and Model 244EC Configuration Interface. . . . .A-8A-9A-9A-9APPENDIX BApprovalsSafety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hazardous Locations Installations . . . . . . . . . . . . . . . . . . . . . .Locations Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installation Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1B-1B-2B-4APPENDIX CModels 644 and 244ETemperature TransmittersManual SupplementOld Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transmitter Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sensor Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . .Special Mounting Considerations . . . . . . . . . . . . . . . . . . . .New Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transmitter Design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sensor Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . .Special Mounting Considerations . . . . . . . . . . . . . . . . . . . .HART Communicator (Model 644H only) . . . . . . . . . . . . .Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-2C-2C-2C-2C-3C-3C-3C-3C-3C-42A-1A-1A-2A-5A-5A-6
Section1IntroductionSafety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1Transmitter Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1Manual Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-3SAFETY MESSAGESProcedures and instructions in this manual may require specialprecautions to ensure the safety of the personnel performing theoperations. Information that raises potential safety issues is indicatedby a warning symbol ( ). Refer to the safety messages listed at thebeginning of each section before performing an operation preceded bythis symbol.Failure to follow these installation guidelines could result in death orserious injury. TRANSMITTER OVERVIEWMake sure only qualified personnel perform the installation.Thank you for choosing the Model 244E. Features of the Model 244EHand Model 244ER transmitters include: Configuration using the Model 244EC Configuration Interfaceand a Microsoft Windows -based PC running the Models 244EHand 244ER Configuration Software The ability to convert RTD and thermocouple inputs to 4–20 mA,2-wire outputs that are less susceptible to electrical noise The capability to linearize RTD and thermocouple inputswith temperature Electrical input-output isolation Electronics that are completely encapsulated in epoxy andenclosed in a metal housing, making the transmitter extremelydurable and ensuring long-term reliability A compact size and two housing options allowing mountingflexibility for the control room or the fieldRosemount Inc. has a full range of compatible connection heads,sensors, and thermowells to provide complete assemblies for processtemperature measurements. Refer to Volume 1 of the RosemountTemperature Sensors and Assemblies Product Data Sheet (documentnumber 00813-0100-2654) for thread mount sensors and accessories, orrefer to Volume 2 (document number 00813-0100-2654) for DIN-stylesensors and accessories.1-1
Rosemount Models 244EH and 244ER PC-Programmable Temperature TransmittersMANUAL OVERVIEWThis manual is designed to assist in the installation, operation, andmaintenance of Rosemount Model 244EH and 244ER PCProgrammable Temperature Transmitters and the Model 244ECConfiguration Interface.Section 2: Installation Tools for installation Mounting Installation Field wiringSection 3: Operation Power Supply ConfigurationSection 4: Maintenance and Troubleshooting Software TroubleshootingAppendix A: Reference Data Specifications Dimensional drawings Ordering informationAppendix B: Approvals Locations certifications Installation drawingsAppendix C: Models 644 and 244E Temperature Transmitters ManualSupplement Comparison between new and old Models 644 and 244E Specifications1-2
CONSIDERATIONSGeneralElectrical temperature sensors such as RTDs and thermocouplesproduce low-level signals proportional to their sensed temperature. TheModels 244EH and 244ER transmitters convert the low-level sensorsignal to a standard 4–20 mA dc signal that is relatively insensitive tolead length and electrical noise. This current signal is then transmittedto the control room via two wires.MechanicalWhen choosing an installation location and position, take into accountthe need for access to the transmitter.Wiring ConnectionsMake wiring connections through the cable entry in the side of theconnection head. Be sure to provide adequate clearance forcover removal.ElectricalProper electrical installation is necessary to prevent errors due tosensor lead resistances and electrical noise. Shielded cable should beused in electrically noisy environments.EnvironmentalThe transmitter electronics module is permanently sealed within thehousing, resisting moisture and corrosive damage. Verify that theoperating atmosphere of the transmitter is consistent with theappropriate hazardous locations certifications.1-3
Section2InstallationSafety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1Tools needed for Installation . . . . . . . . . . . . . . . . . . . . . . . page 2-2Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-3Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-5Field Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-12Failure Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-16SAFETY MESSAGESInstructions and procedures in this section may require specialprecautions to ensure the safety of the personnel performing theoperations. Information that raises potential safety issues is indicatedby a warning symbol ( ). Please refer to the following safety messagesbefore performing an operation preceded by this symbol.WarningsExplosions could result in death or serious injury. Do not remove the enclosure cover in explosive atmospheres when the circuitis live. Verify that the operating atmosphere of the transmitter is consistent with theappropriate hazardous locations certification. Enclosure covers must be fully engaged to meet explosion-proof requirements.Process leaks could result in death or serious injury. Install and tighten thermowells or sensors before applying pressure, or processleakage may result. Do not remove the thermowell while in operation. Doing so may cause processfluid leaks.Electrical shock could cause death or serious injury. If the sensor is installed in a high-voltage environment and a fault condition orinstallation error occurs, high voltage may be present on transmitter leadsand terminals. Use extreme caution when making contact with leads and terminals.2-1
Rosemount Models 244EH and 244ER PC-Programmable Temperature TransmittersFigure 2-1. TransmitterInstallation FlowchartTOOLS NEEDED smitterFieldInstallSet SensorTypeSet FailureMode SwitchSet Numberof WiresMountTransmitterSet 50/60 HzFilterWireTransmitterSet UnitsPowerTransmitterSet RangeValuesCheck forLeaksSetDampingDoneThe tools needed for installation are as follows:Models 244EH and 244ER: Transmitter Mounting apparatusModel 244EC Configuration Interface: Transmitter 9-pin connector cable MINIGRABBER clipsModel 244EH and 244ER Configuration Software: PC Windows-based software2-2244-244 02ABegin Here
MOUNTINGThe Model 244EH installs in a connection head or universal headmounted directly on a sensor assembly, apart from a sensor assemblyusing a universal head, or to a DIN rail using an optional mountingclip. The Model 244ER mounts directly to a wall or to a DIN rail.The Models 244EH and 244ER transmitters will operate withinspecifications for ambient temperatures between –40 and 185 F(–40 and 85 C).In a direct mounting configuration using a Model 244EH transmitter,process heat is transferred from the thermowell to the transmitter viathe connection head. If the expected connection head temperature isnear or beyond specification limits, consider the use of additionalthermowell lagging, an extension nipple, or a remote mountingconfiguration to isolate the transmitter from excessive temperatures.Figure 2-2 provides an example of the relationship between transmitterhousing temperature rise and extension length. Use Figure 2-2 as aguide for determining adequate thermowell extension length.60504058110250075ProcProcesesss Tem p3044-0123AC0 20 C3054Temperature Rise Above Ambient ( C)Figure 2-2. Model 244EH ConnectionHead Temperature Rise vs. ExtensionLengther atureTemperature CProcessTemperature100125150175200225Extension Length (mm)ExampleThe transmitter specification limit is 85 C. If the ambient temperatureis 55 C and the process temperature to be measured is 800 C, themaximum permissible connection head temperature rise is thetransmitter specification limit minus the ambient temperature(85 –55 C), or 30 C. In this case, an extension of 100 mm meets thisrequirement, but 125 mm provides a margin of 8 C, thereby reducingany temperature effects in the transmitter.2-3
Rosemount Models 244EH and 244ER PC-Programmable Temperature TransmittersSpecial MountingConsiderationsSpecial mounting hardware is available for mounting aModel 244EH head mount transmitter to a DIN rail, or assemblinga new Model 244EH to an existing threaded sensor connection head(former option code L1).Mounting a Model 244EH to a DIN RailTo attach a head mount transmitter to a DIN rail, assemble theappropriate rail mounting kit (part number 00644-5301-0010) to thetransmitter as shown in Figure 2-3, then follow the procedure under“Rail Mount Transmitter with Integral Mount Sensor” on page 2-7.G-Rail (asymmetric)Top Hat Rail tterTransmitterRail ClipRail Clip644-5302B01A, D02AFigure 2-3. Assembling Rail ClipHardware to a Model 244EHNote: Kit includes Mounting Hardware and both types of rail kits.Retrofitting a Model 244EH for Use in an Existing Threaded SensorConnection HeadTo mount a Model 244EH in an existing threaded sensor connectionhead (former option code L1), order the Model 244EH retrofit kit (partnumber 00644-5321-0010). The retrofit kit includes a new mountingbracket and all associated hardware necessary to facilitate theinstallation of the Model 244EH in the existing head.Existing Threaded SensorConnection Head(Former option code L1)Kit includes replacementbracket and screws.2-4644-5321A01AFigure 2-4. Assembling Model244EH for Use in an Existing L1Connection Head
INSTALLATIONPROCEDURESTransmitterRefer to the appropriate procedure and the accompanying illustrationswhen installing the transmitter.Head Mount Transmitter with DIN Plate Style SensorThe least complicated assembly uses: an integral mount sensor with flying leads an integral DIN style connection head a standard extension a threaded thermowellRefer to Volume 2 of the Rosemount Sensors Product Data Sheet(document number 00813-0101-2654) for complete sensor andmounting accessory information.To complete the assembly, follow the steps described below.1. Attach the thermowell to the pipe or process container wall. Installand tighten the thermowell before applying pressure.2. Set the transmitter failure mode switch(see Figure 2-13 on page 2-16).3. Assemble the transmitter to the sensor. Push the transmittermounting screws through the sensor mounting plate and insert thesnap rings (optional, part number 00644-4432-0001) into thegroove of each transmitter mounting screw.4. Insert the transmitter-sensor assembly into the connection head.Thread the transmitter mounting screw into the connection headmounting holes.5. Assemble the extension to the connection head. Insert theassembly into the thermowell.6. Attach a cable gland into the shielded cable.7. Insert the shielded cable leads into the connection head throughthe cable entry. Connect and tighten the cable gland.8. Connect the shielded cable leads to the transmitter powerterminals. Avoid contact with leads and terminals.9. Install and tighten the connection head cover. Enclosure coversmust be fully engaged to meet explosion-proof requirements.Model 244EHTransmitterConnectionHeadIntegral Mount Sensorwith Flying LeadsThreadedThermowell644-0000B04AFigure 2-5. Typical Model 244EHMounting Configuration Using IntegralMount Sensor and AssemblyThreaded Extension2-5
Rosemount Models 244EH and 244ER PC-Programmable Temperature TransmittersHead Mount Transmitter with Threaded SensorThe least complicated assembly uses: a threaded sensor with flying leads the universal connection head a union and nipple extension assembly a threaded thermowellRefer to Volume 1 of the Rosemount Sensors Product Data Sheet(document number 00813-0100-2654) for complete sensor andmounting accessory information.To complete the assembly, follow the steps as described below.1. Attach the thermowell to the pipe or process container wall. Installand tighten thermowells before applying pressure.2. Attach necessary extension nipples and adapters. Seal the nippleand adapter threads with silicone tape.3. Screw the sensor into the thermowell. Install drain seals ifrequired for severe environments or to satisfy code requirements.4. Set the transmitter failure mode switch(see Figure 2-13 on page 2-16).5. Pull the sensor wiring leads through the extensions and adaptersinto the universal head. Mount the transmitter in the universalhead by threading the transmitter mounting screws into theuniversal head mounting holes.6. Mount the assembly into the thermowell. Seal adapter threadswith silicone tape.7. Install conduit for field wiring to the conduit entry of the universalhead. Seal conduit threads with silicone tape.8. Pull the field wiring leads through the conduit into the universalhead. Attach the sensor and power leads to the transmitter. Avoidcontact with leads and terminals.9. Install and tighten the universal head cover. Enclosure coversmust be fully engaged to meet explosion-proof requirements.Threaded ThermowellThreaded Style SensorStandardExtensionUniversal Head2-6644-0000A04AFigure 2-6. Typical Model 244EHTransmitter Mounting ConfigurationUsing Threaded Style Sensorand Assembly
Rail Mount Transmitter with Integral Mount SensorThe least complicated assembly uses: an integral mount sensor with terminal block an integral DIN style connection head a standard extension a threaded thermowellRefer to Volume 2 of the Rosemount Sensors Product Data Sheet(document number 00813-0101-2654) for complete sensor andmounting accessory information.To complete the assembly, follow the procedure described below.1. Attach the transmitter to a suitable rail or panel.2. Attach the thermowell to the pipe or process container wall. Installand tighten the thermowell before applying pressure.3. Attach the sensor to the connection head and mount the entireassembly to the thermowell.4. Attach sufficient lengths of sensor lead wire to the sensor terminalblock.5. Attach and tighten the connection head cover. Enclosure coversmust be fully engaged to meet explosion-proof requirements.6. Run sensor lead wires from the sensor assembly to the transmitter.7. Set the transmitter failure mode switch(see Figure 2-13 on page 2-16).8. Attach the sensor and power leads to the transmitter. Avoidcontact with leads and terminals.Figure 2-7. Typical Rail MountTransmitter Mounting ConfigurationUsing Integral Mount Sensorand AssemblyRail Mount TransmitterIntegral Mount Sensorwith Terminal BlockConnection HeadSensor Leadswith Cable Gland644-0000C04AStandard ExtensionThreaded Thermowell2-7
Rosemount Models 244EH and 244ER PC-Programmable Temperature TransmittersRail Mount Transmitter with Threaded SensorThe least complicated assembly uses: a threaded sensor with flying heads a threaded sensor connection head a union and nipple extension assembly a threaded thermowellRefer to Volume 1 of the Rosemount Sensors Product Data Sheet(document number 00813-0100-2654) for complete sensor andmounting accessory information.To complete the assembly, follow the procedure described below.1. Attach the transmitter to a suitable rail or panel.2. Attach the thermowell to the pipe or process container wall. Installand tighten the thermowell before applying pressure.3. Attach necessary extension nipples and adapters. Seal the nippleand adapter threads with silicone tape.4. Screw the sensor into the thermowell. Install drain seals ifrequired for severe environments or to satisfy code requirements.5. Screw the connection head to the sensor.6. Attach the sensor lead wires to the connection head terminals.7. Attach additional sensor lead wires from the connection head tothe transmitter.8. Attach and tighten the connection head cover. Enclosure coversmust be fully engaged to meet explosion-proof requirements.9. Set the transmitter failure mode switch(see Figure 2-13 on page 2-16).10. Attach the sensor and power leads to the transmitter. Avoidcontact with leads and terminals.Rail MountTransmitterThreaded SensorConnection HeadStandardExtensionThreadedStyle Sensor2-8ThreadedThermowell644-0000A04BFigure 2-8. Typical Rail MountTransmitter Mounting ConfigurationUsing Threaded Style Sensorand Assembly
Multichannel InstallationsSeveral transmitters can be connected to a single master power supplyas shown in Figure 2-9. In this case, the system may be grounded onlyat the negative power supply terminal. In multichannel installationswhere several transmitters depend on one power supply and the loss ofall transmitters would cause operational problems, consider a back-upbattery or power supply that cannot be interrupted. The diodes shownin Figure 2-9 prevent unwanted charging or discharging of theback-up battery.Figure 2-9. Multichannel InstallationsRLeadTransmitterNo. 2Configuration SoftwareRLeadBackup BatteryReadout orControllerNo.1dcPowerSupplyReadout orControllerNo. 2To Additional TransmittersRLead3044-0131ATransmitterNo. 1System RequirementsFor the configuration software to function properly, the followingminimum PC requirements must be observed. 80386 or faster processor 1 MB free disk space 3.5-inch floppy disk drive Mouse or other pointing device 256 color display (recommended settings are 16-bit color at1024 728 screen resolution) Microsoft Windows 3.1, Windows for Workgroups 3.11,Windows 95, or Windows NT.The configuration software is available in English, French, German,Italian, Spanish, Chinese, Japanese, and Korean language versions.The configuration software automatically selects the appropriatelanguage based on the language version of Windows.NOTEClose all currently running applications before starting theinstallation procedure.NOTEWindows 98 is not compatible with this software.2-9
Rosemount Models 244EH and 244ER PC-Programmable Temperature TransmittersChoose the procedure that matches the operating system you are using.Procedure for Windows 3.1 or Windows for Workgroups 3.111. If you do not have Win32s installed, install it now. Follow theinstructions on the diskette label.2. Insert the Models 244EH and 244ER Configuration Softwarediskette into your floppy disk drive.3. In the File Manager, choose RUN from the FILE menu.4. The RUN dialog box appears. In the COMMAND LINE text box,type drive :\setup. Substitute the letter of your floppy disk drive(usually a or b) for drive . Click OK.5. The WELCOME window appears. Click OK.6. The SELECT DESTINATION DIRECTORY window appears. Toaccept the default installation directory, click OK. To specify adifferent installation directory, either type a new directory path inthe DESTINATION DIRECTORY text box or select one from the list.Click OK.7. The COMM SETTINGS window appears. In the COMM PORTdrop-down box, choose the communication port to which youintend to connect the Model 244EC. Click OK.8. The SELECT PROGRAM MANAGER GROUP window appears. Toaccept the default Program Manager group name, click OK. Tospecify a different group name, either type a new name in theGROUP NAME text box or select one from the list. Click OK.Procedure for Windows 95 or Windows NT1. Insert the Models 244EH and 244ER Configuration Softwarediskette into your floppy disk drive.2. Click the START button on taskbar. Click RUN.3. The RUN dialog box appears. In the OPEN text box, type drive :\setup. Substitute the letter of your floppy disk drive(usually a or b) for drive . Click OK.4. The SELECT DESTINATION DIRECTORY window appears. Toaccept the default installation directory, click OK. To specify adifferent installation directory, either type a new directory path inthe DESTINATION DIRECTORY text box or select one from the list.Click OK.5. The COMM SETTINGS window appears. Choose thecommunication port to which you intend to connect theModel 244EC from the COMM PORT drop-down box. Click OK.6. The SELECT PROGRAM MANAGER GROUP window appears. Toaccept the default Program Manager group name, click OK. Tospecify a different group name, either type a new name in theGROUP NAME text box or select one from the list. Click OK.2-10
Screen ConventionsThe Models 244EH and 244ER Configuration Software follows theMicrosoft Windows screen conventions with the following exception:Configuration parameters change color to indicate fields whereinformation has changed. Before placing a new transmitter into service,or before returning a transmitter to service after changingconfiguration information, verify that the values in the fields that havebeen changed reflect the correct configuration parameters for yourapplication. For example, if you change the Sensor Type field to PT100–Alpha 392, the Number of Wires, Units, 4 mA Point, and 20 mA Pointfields all change to reflect the default PT100–Alpha 392 sensor values.Verify all information before placing the transmitter into service.Model 244EC ConfigurationInterfaceThe Model 244EC Configuration Interface is a portable, self-containedlink between your PC and a Model 244. The Model 244EC connects to aPC serial port with a standard 9-pin interconnecting plug and connectsto a transmitter with two MINIGRABBER clips.The Model 244EC will also operate using a wall power adapter or asingle replaceable 9-volt battery.Setting Up the Model 244EC Configuration InterfaceAll necessary power is provided through the configuration leads fromthe Model 244EC to the transmitter. The sensor does not need to bedisconnected in order to configure the transmitter.To set up the Model 244EC Configuration Interface and prepare it foruse, refer to Figure 2-10 on page 2-12 and follow the proceduredescribed below.1. Install the 9-volt battery in the Model 244EC. Be sure the powerswitch remains in the “OFF” position.2. Attach the ribbon cable from the Model 244EC to the serial port ofyour PC using the 9-pin interconnecting plug. If your PC has a25-pin serial port, you will need a 25-pin to 9-pin adapter toaccommodate the connection.NOTEIt is not necessary to power down your PC before you att
Head Temperature Rise vs. Extension Length Example The transmitter specification limit is 85 C. If the ambient temperature is 55 C and the process temperature to be measured is 800 C, the maximum permissible connection head temperature rise is the transmitter specification l
using different object models and document the component interfaces. A range of different models may be produced during an object-oriented design process. These include static models (class models, generalization models, association models) and dynamic models (sequence models, state machine models).
Quasi-poisson models Negative-binomial models 5 Excess zeros Zero-inflated models Hurdle models Example 6 Wrapup 2/74 Generalized linear models Generalized linear models We have used generalized linear models (glm()) in two contexts so far: Loglinear models the outcome variable is thevector of frequencies y in a table
Lecture 12 Nicholas Christian BIOST 2094 Spring 2011. GEE Mixed Models Frailty Models Outline 1.GEE Models 2.Mixed Models 3.Frailty Models 2 of 20. GEE Mixed Models Frailty Models Generalized Estimating Equations Population-average or marginal model, provides a regression approach for . Frailty models a
3500 3508 1811 2811 3745 3512 1841 2841 3700 3524 3524-XL 3548-XL 3548 3550 3550-12G 3550-24-EMI 3550-24-SMI 3550-48-EMI 3550-48-SMI 4402 Series Models Catalyst Models cont. SFS Models: Small Bus Pro Models: Catalyst Models cont. 2600 Series Models: Nexus Models: 1800 Series Models: 2
Fits: 150, 155, 165, 200 Models HA2210 Filler Neck Screen PP203 Flame Out Safety Control PP204 Rotor Kit 1/2" PP206 Nozzle (35, 40 Models) PP207 Nozzle (50 Models) PP208 Nozzle (70 Models) PP209 Nozzle (100, 110 Models) PP210 Nozzle (150, 155 Models) PP211 Spark Plug (70, 100, 150, 155, 165, 200 Models) PP212 Spark Plug (35, 50 Models)
Cabinet Systems. Section A: Table of Contents. Cabinet Models . Pro-Finish Cabinets, Standard Models A2 Ergo-Blast Models A4 FaStrip Models A5 SafeStrip Models A5 Single-Pass Models A5. Dust Collector Models . A6. Options. 2636 Cabinets including Ergo-Blast and FaStrip A7 2636 SafeStrip and Single-Pass Models A10
Refer to Owner’s Manual Nozzle (50/55 Models) HA3024 Nozzle (60 Models) HA3026 Nozzle (70 Models) HA3027 Nozzle (110, 115 Models) HA3028 Nozzle (150, 155 Models) HA3029 Nozzle (165 Models) 100735-31 Nozzle (200 Models) 102548-03 Hot Surface Ignitor HA3014 Air Filter Kit (35, 40, 50, 55, 60, 70 Models) HA3017 Filter Kit (110, 115, 150, 155 .
MATH348: Advanced Engineering Mathematics Nori Nakata. Sep. 7, 2012 1 Fourier Series (sec: 11.1) 1.1 General concept of Fourier Series (10 mins) Show some figures by using a projector. Fourier analysis is a method to decompose a function into sine and cosine functions. Explain a little bit about Gibbs phenomenon. 1.2 Who cares? frequency domain (spectral analysis, noise separation .
