MULTI-LAYER CERAMIC CHIP INDUCTORS
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesAPPLICATIONSFEATURESHigh Frequency Applications:For high frequency applications Standard EIA sizes 0201 (0603), 0402 (1005),0603 (1608) Lead-free RoHS compliant parts Tight tolerance in physical dimensions Surface mounting applicability(Supports reflow soldering condition) Tight Inductance Tolerance, Excellent Q andGuaranteed SRF range High product quality and outstanding reliability.(Ceramic integrated structure) Operating temperature -40ºC to 85ºC Mobile CommunicationsWLANPHSEMI Counter measure in HighFrequency Circuits Computer CommunicationHOW TO ceLC Chip Inductor020104020603G 2%H 3%J 5%K 10%B 0.1nHC 0.2nHS 0.3nHDIMENSIONS3N9 3.9nH39N 39nHR39 390nHGTStyleTerminationG StandardT Sn PlatingARSpecialPackagingA StandardR 7" Reelmm (inches)SizeLWT02010.60 0.03(0.024 0.001)0.30 0.03(0.012 0.001 )04021.00 0.10(0.040 0.004)06031.60 0.15(0.063 0.006)ALMinMax0.30 0.03(0.012 0.001)0.10(0.004)0.20(0.008)0.50 0.10(0.020 0.004)0.50 0.10(0.020 0.004)0.10(0.004)0.30(0.012)0.80 0.15(0.031 0.006)0.80 0.15(0.031 0.006)0.20(0.008)0.60(0.024)ATWAVAILABLE INDUCTANCE VALUE AND TOLERANCESize CodeLCCI0201LCCI0402LCCI0603Available Inductance0.3nH - 39nH0.3nH - 150nH1.0 nH - 470 nHInductance RangesStandard Tollerance0.3nH-0.9nHB 0.1nH1.0nH-6.2nHB 0.1nH, C 0.2nH, S 0.3 nH6.8nH - 27nHH 3%, J 5%33nH-39nHJ 5%0.3nH-0.8nHB 0.1nH1.0nH-6.2nHB 0.1nH, C 0.2nH, S 0.3 nH6.8nH-68nHG 2%, H 3%, J 5%82nH-150nHJ 5%1.0nH-5.6nHS 0.3nH6.8nH-470nHJ 5%The Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.04032031
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesELECTRICAL CHARACTERISTICSCase Size 0201OrderingCodeL B 0.1nHB 0.1nHB 0.1nHB 0.1nHB 0.1nHB 0.1nHB 0.1nHB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhH 3%, J 5%H 3%, J 5%H 3%, J 5%H 3%, J 5%H 3%, J 5%H 3%, J 5%H 3%, J 5%H 3%, J 5%Q Min.L,Q TEST FREQ. (MHz)SRF (MHz) MIN.DC Resistance (Ω)MAX.Irms 035035030030030025025025025025051002,2000.9200The Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.021420
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesELECTRICAL CHARACTERISTICS (CONTINUED)Case Size 0201OrderingCodeL (nH)22N27N33N39N22273339LToleranceH 3%, J 5%H 3%, J 5%J 5%J 5%Q Min.L,Q TEST FREQ. (MHz)SRF (MHz) MIN.DC Resistance (Ω)MAX.Irms 2.12.4150140120120Tolerance: B 0.1nH, C 0.2nH, S 0.3nH, G 2%, H 3%, J 5%, K 10%Measuring Equipment: HP4287 16196CMeasuring Temperature: 25 3ºCOperating Temperature: -40ºC to 85ºC0201 L VS Frequency0201 Q VS Frequency0201 Z VS FrequencyThe Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.04302033
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesELECTRICAL CHARACTERISTICSCase Size 0402OrderingCodeL 12015034LToleranceB 0.1nHB 0.1nHB 0.1nHB 0.1nHB 0.1nHB 0.1nHB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhB 0.1nH, C 0.2nH, S 0.3 NhG 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%G 2%, H 3%, J 5%J 5%J 5%J 5%J 5%Q Min.L,Q TEST FREQ. (MHz)SRF (MHz) MIN.DC Resistance (Ω)MAX.Irms 0200200200200200200150140The Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.043020
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI Series0402 L VS Frequency0402 Q VS Frequency0402 Z VS FrequencyThe Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.04302035
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesELECTRICAL CHARACTERISTICSCase Size 0603OrderingCodeL 8210012015018022027036LToleranceS 0.3nHS 0.3nHS 0.3nHS 0.3nHS 0.3nHS 0.3nHS 0.3nHS 0.3nHS 0.3nHS 0.3nHJ 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%J 5%Q Min.L,Q TEST FREQ. (MHz)SRF (MHz) MIN.DC Resistance (Ω)MAX.Irms 300300200The Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.101420
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI Series0603 L VS Frequency0603 Q VS Frequency0603 Z VS FrequencyThe Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.02142037
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesTEST CONDITION AND REQUIREMENTSNo.ItemTest Condition1Inductance Temperature: 25 3ºC Relative Humidity: 45 to 75%RH2Q Value Temperature: 25 3ºC Relative Humidity: 45 to 75%RH3DC ing Strength8Resistance toSoldering Heat9Thermal ShockRequirements Measuring equipment and fixture:(0603) HP 4291 16192A(0402) HP 4287 16193A(0201) HP 4287 16196CWithin specified tolerance. Measuring equipment and fixture:(0603) HP 4291 16192A(0402) HP 4287 16193A(0201) HP 4287 16196CIn accordance with electrical specification. Temperature: 25 3ºC Relative Humidity: 45 to 75%RH Measuring equipment: HP 4338.In accordance with electrical specification.Inductors shall be visually inspected for visible evidence of defect.In accordance with specification.Dimension shall be measured with caliper or micrometerIn accordance with dimension specification.Immerse a test sample into a methanol solution containing resin andimmerse into molten solder of230 5ºC for 5 1 second.More than 75% of the terminal electrode partshall be covered with fresh solder.Solder the chip to test jig then apply a force in the direction shown inbelow. The soldering shall be done with the reflow method and shall beconducted with care so that the soldering is uniform and free of defectssuch as heat shock.Immerse a test sample into a methanol solution containing resin,preheat it at 120 to 150ºC for 1 minute and immerse into molten solderof 270 5ºC for 10 1 second so that both terminal electrodes arecompletely submerged.Solder a test sample to printed circuit board, and conduct 5 cycles oftest under the conditions shown as below.0201 & 0402 operating temp. range: -55 125ºC0603 operating temp. range: -40 85ºCCycle: Maximum operating temp. (30 3min)1. No mechanical damage shall be observed.2. Rdc-value: to meet the initial Spec.No visible damage.Inductance variation within 10%.Q variation within 20%.No visible damage.Inductance variation within 10%.Q variation within 20%.within 3minMinimum operating temp. (30 3 min)High HumidityState Life TestKeep a test sample in an atmosphere with a temperature of 40 2ºC,90 95%RH for 500 12 hours. After the removal from test chamber, 2 to3 hours of recovery under standard condition, and measurement shall bemade after 24 2 hrs. of recovery under standard condition.No visible damage.Inductance variation within 10%.Q variation within 20%.11High HumidityLoad Life TestSolder a test sample to printed circuit board then keep the test samplein an atmosphere with a temperature of 40 2ºC, 90 95%RH for 500 12 hours while supplying the rated current. After the removal fromtest chamber, 2 to 3 hours of recovery under standard condition, andmeasurement shall be made after 24 2 hrs. of recovery under standardcondition.No visible damage.Inductance variation within 10%.Q variation within 20%.12HighTemperatureState Life TestKeep a test sample in an atmosphere with a temperature of 85 2ºCfor 500 12 hours. After the removal from test chamber, 2 to 3 hoursof recovery under standard condition, and measurement shall be madeafter 24 2 hrs. of recovery under standard condition.No visible damage.Inductance variation within 10%.Q variation within 20%.13HighTemperatureLoadSolder a test sample to printed circuit board then keep the test sample inan atmosphere with a temperature of 85 2ºC for 500 12 hours whilesupplying the rated current. After the removal from test chamber, 2 to 3hours of recovery under standard condition, and measurement shall bemade after 24 2 hrs. of recovery under standard condition.No visible damage.Inductance variation within 10%.Q variation within 20%.1038The Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.021420
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesPACKAGING SPECIFICATIONSPaper tape specification (0201/0402/0603)SymbolABFPW0201Size0.36 (0.015)0.66 (0.027)3.50 (0.138)2.00 (0.079)8.00 (0.315)Tolerance 0.02 (0.001) 0.02 (0.001) 0.05 (0.002) 0.10 (0.004) 0.20 (0.008)Product Size0402SizeTolerance0.60 (0.024) 0.03 (0.001)1.12 (0.044) 0.03 (0.001)3.50 (0.138) 0.05 (0.002)2.00 (0.079) 0.10 (0.004)8.00 (0.315) 0.20 (0.008)0603SizeTolerance0.98 (0.038) 0.03 (0.002)1.80 (0.071) 0.05 (0.002)3.50 (0.138) 0.05 (0.002)4.00 (0.157) 0.10 (0.004)8.00 (0.315) 0.10 (0.008)Reel SpecificationsTape Width8.00 (0.315)G10.0 1.5 (0.394 0.059)T max.14.5 (0.571)D180 (7.087)Peel strength of top cover tapeThe peel speed shall be about 300 mm/min.The peel strength of top cover tape shall be between 0.1 to 1.0N.The Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.02142039
MULTI-LAYER CERAMIC CHIP INDUCTORSLCCI SeriesQuantity per reel:Marking0201: 15,000 pieces / reel0402: 10,000 pieces / reel0603: 4,000 pieces / reelThe following item shall be marked on the reel.1. Manufactures parts number.2. Manufacturing date code.3. Manufacturer name.4. Manufactures lot number.5. Quantity.The contents of a box:0201: 5 reels / box0402: 5 reels / box0603: 5 reels / boxCAUTIONSSoldering Profile for SMT Process with SnPb Solder PasteStorageThe chip inductor shall be packaged in carrier tapes.To keep storage place temperature from 5 to 35ºC, humidity from45 to 70% RH.The rate of preheat should not exceed 4ºC/sec. and a target of 2ºC/sec. is preferred. Ceramic chip components should be preheated towithin 100 to 130ºC of the soldering.The storage atmosphere must be free of gas containing sulfur andchlorine. Also, avoid exposing the product to saline moisture. If theproduct is exposed to such atmospheres, the terminals will oxidizeand solderability will be affected.The solderability is assured for 12 months from our final inspectiondate if the above storage condition is followed.HandlingChip inductor should be handled with care to avoid contaminationor damage. The use of vacuum pick-up or plastic tweezers isrecommended for manual placement. Tape and reeled packages aresuitable for automatic pick and placement machine.Recommended Pad DimensionsSoldering Profile for SMT Process with LeadFree Solder PasteThe rate of preheat should not exceed 4ºC/sec. and a target of 2ºC/sec. is preferred. Ceramic chip components should be preheated towithin 100 to 130ºC of the soldering.mm (inchesSize (EIA)02010402060340L XW0.60 x 0.30(0.024 x 0.012)1.00 x 0.50(0.039 x 0.020)1.60 x 0.80(0.063 x 0.031)abc0.15 to 0.350.20 to 0.300.25 to 0.30(0.006 to 0.014) (0.008 to 0.012) (0.010 to 0.012)0.30 to 0.500.35 to 0.450.40 to 0.50(0.012 to 0.020) (0.014 to 0.018) (0.016 to 0.020)0.70 to 1.000.60 to 0.800.70 to 0.80(0.028 to 0.039) (0.024 to 0.031) (0.028 to 0.031)The Important Information/Disclaimer is incorporated in the catalog where these specifications came from oravailable online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.021420
LCCI Series APPLICATIONS High Frequency Applications: Mobile Communications WLAN PHS EMI Counter measure in High Frequency Circuits Computer Communication HOW TO ORDER LC Family LC Chip Inductor Series Cl Size 0201 0402 0603 0402 Tolerance G
FERRITE BEAD INDUCTORS CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE) WAVE REFLOW chipbeads_e-E02R01 CHIP BEAD INDUCTORS FOR POWER LINES （FB SERIES M TYPE） PARTS NUMBER *Operating Temp. : -40 125 （Including self-generated heat） 8 0 0S－ HT 16 23 J M B F Blank space
Inductors in Series – No Mutual inductance When inductors are connected in series, the total inductance is the sum of the individual inductors' inductances. L T L 1 L 2 L N Example #1 Three inductors of 10mH, 40mH and 50mH are connected together in a series
SMD Inductors Series All specification & dimensions are subject to change,please call your nearest KLS sales represesntative for update information ORDER INFORMATION Product NO.: KLS1 - -2218 SP32 K-R Inductors SMD INDUCTORS Series Electrical code 1.0 220:.μH Tolerance:K 10%,M 20%. KLS18-SP32 SMD
sliding velocity. Friction coefficients are very high for the ceramic/ceramic pair beginning at 0.60 -4-0.10 (very erratic) at room temperature and steadily increasing with temperature to above 1.0 at 900 C. The friction coefficient for the ceramic/metal pair is about the same as that of the ceramic/ceramic pair at
Chip Inductors High Current Multilayer Chip Power Inductor L-DMI Dimensions - Millimeters (Inches) Dimensions - Millimeters (Inches) Land Pattern - Millimeters L T C B A B Chip Inductor Land Pattern older resist EIA Size Code Metric Size Code L Length W Width T Thickness B Bandwidth A B C 0603 1608 1.60 (0.063) 0.15 (0.006) 0.80 (0.031 .
Mutually coupled inductors in series Consider there are two inductors L1 and L2 in series, which are magnetically coupled and have a mutual inductance M. The magnetic field of the two inductors could be aiding or opposing each other, depending on their orientation (fig 6.1). a) b) Fig. 6.1. Mutually cou
SMD Inductors Metal Composite Power Inductors MPXV Automotive Grade Part Number System MPX 1 D0520 L 1R5 Series Version Size Code Inductor Inductance Code µH MPXV 1 D0520 5x5x2.0 mm D0530 5x5x3.0 mm D0618 6x6x1.8 mm D0624 6x6x2.4 mm D0630 6x6x3.0 mm D0650 6x6x5.0 mm D
DP Series Power Inductors provide an excellent, low cost alternative to conventional chokes or inductors. Used in EMI filtering and energy storage, these compact, low radiation inductors a
