Course Catalog - JBL Technologies
Course CatalogSIMULIA 201805 November 2018
Learning Experience Course Catalog 2007-2018 Dassault Systèmes - All rights reservedNo part of this publication may be reproduced, translated, stored in retrieval system or transmitted, inany form or by any means, including electronic, mechanical, photocopying, recording or otherwise,without the express prior written permission of DASSAULT SYSTEMES. This courseware may onlybe used with explicit DASSAULT SYSTEMES agreement.
Learning Experience Course CatalogSIMULIAAbaqus1Abaqus/CAE: Geometry Import and Meshing2Abaqus/Explicit: Advanced Topics3Abaqus for Offshore Analysis4Adaptive Remeshing in Abaqus/Standard5Advanced Abaqus Scripting6Analysis of Composite Materials with Abaqus8Analysis of Geotechnical Problems with Abaqus9Automotive NVH with Abaqus11Buckling, Postbuckling and Collapse Analysis12Composites Modeler for Abaqus/CAE13Co-simulation with Abaqus and Dymola15Crashworthiness Analysis with Abaqus16CZone for Abaqus17Electromagnetic Analysis with Abaqus18Element Selection in Abaqus19Fitness-for-Service Analysis with Abaqus20Flexible Multibody Systems with Abaqus22FSI Simulation Using Abaqus and 3rd Party Codes23GUI Customization with Abaqus24Heat Transfer and Thermal-Stress Analysis with Abaqus25Introduction to Abaqus26Introduction to Abaqus/CAE27Introduction to Abaqus/Standard and Abaqus/Explicit28Introduction to Abaqus Scripting29Linear Dynamics with Abaqus30Metal Forming with Abaqus31Metal Inelasticity in Abaqus32Modeling Contact and Resolving Convergence Issues with Abaqus33Modeling Contact with Abaqus/Standard35Modeling Extreme Deformation and Fluid Flow with Abaqus36Modeling Fracture and Failure with Abaqus38
Learning Experience Course CatalogModeling Rubber and Viscoelasticity with Abaqus39Modeling Stents Using Abaqus40Obtaining a Converged Solution with Abaqus41Structural-Acoustic Analysis Using Abaqus42Substructures and Submodeling with Abaqus43Tire Analysis with Abaqus: Advanced Topics44Tire Analysis with Abaqus: Fundamentals45Writing User Subroutines with Abaqus46CST Studio Site48Introduction to CST Studio Suite49fe-safe51Automating Analysis in fe-safe52Introduction to fe-safe53Introduction to fe-safe/Rubber54Isight56Introduction to Isight57Isight Component Development59Optimizing Engineering Methods with Isight60Simpack61Introduction to Simpack62Simpack Automotive63Simpack Contact Mechanics64Simpack Drivetrain66Simpack Flexible Bodies67Simpack FlexTrack68Simpack Rail69Simpack Scripting70Simpack User Routines71Simpack Wind72Tosca Fluid73Introduction to Tosca Fluid74Tosca Structure75Introduction to Tosca Structure76Tosca Structure nonlinear: Optimization for Structures with Nonlinearity77XFlow78Introduction to XFlow79
Learning Experience Course CatalogXFlow Acoustics Analysis80XFlow Advanced Capabilities81XFlow Complete82XFlow Free-surface Flow83XFlow Moving Parts84XFlow Multiphase Flow85XFlow Single Phase Flow86XFlow Thermal Analysis87
Learning Experience Course CatalogSIMULIAAbaqus1 / 87
Learning Experience Course CatalogAbaqus/CAE: Geometry Import and MeshingCourse CodeSIM-en-CAGIM-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis course provides an in-depth look at severaladvanced Abaqus/CAE capabilities: CAD geometryimport and repair, meshing and partitioning ofcomplicated geometry.ObjectivesUpon completion of this course you will be able to:- Import, edit, and repair CAD geometry.- Import and edit orphan meshes.- Use virtual topology to ease the meshing ofcomplicated geometry.- Partition geometry to enable different meshingtechniques.PrerequisitesNoneAvailable OnlineYes2 / 87
Learning Experience Course CatalogAbaqus/Explicit: Advanced TopicsCourse CodeSIM-en-ADXP-A-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThe course emphasizes practical skills and techniquesthat are needed for analyses with Abaqus/Explicit.ObjectivesUpon completion of this course you will be able to:- Use the explicit dynamics method effectively,including the application of general contact, massscaling, and adaptive remeshing- Use Abaqus/Explicit and Abaqus/Standard togetherto solve difficult problems, including results transferand co-simulation- Model high-strain-rate deformation and failure- Filter outputPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes3 / 87
Learning Experience Course CatalogAbaqus for Offshore AnalysisCourse CodeSIM-en-OFFSH-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceThis course is recommended for engineers withexperience using Abaqus who work in the Oil and Gasindustry.DescriptionThis course was designed by SIMULIA UK in supportof their offshore customers to provide them a moreindepth, industry-specific training. The workshops inthis course are completely new and were developedfrom customer applications.ObjectivesThe topics covered in this course include:- Review nonlinear material behavior (metal plasticityand hyperelasticity)- Capabilities of Abaqus element types in general- Specific element discussions include drag chain,pipe, PSI and ITT elements- Pipe-soil interaction, including lateral buckling of apipe line on a seabed- Abaqus/Aqua capabilities in Abaqus/Standard tomodel wave, buoyancy, current & wind loading- Coupled Eulerian-Lagrangian (CEL) approach inAbaqus/ExplicitPrerequisitesNoneAvailable OnlineYes4 / 87
Learning Experience Course CatalogAdaptive Remeshing in Abaqus/StandardCourse CodeSIM-en-ADAP-A-30-2018Available ReleaseSIMULIA 2018Duration8 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis course provides an in-depth coverage of theAbaqus features which address adaptive remeshing forsolution accuracy.ObjectivesUpon completion of this course you will be able to:- Set up an adaptive remeshing process- Specify adaptive remeshing rules- Interpret error indicators and their associated outputvariablesPrerequisites-Available OnlineYesThis course is recommended for engineers withexperience using Abaqus5 / 87
Learning Experience Course CatalogAdvanced Abaqus ScriptingCourse CodeSIM-en-SCRPT-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis seminar is offered as a follow-up to theIntroduction to Abaqus Scripting course. It is a deeperdive into both Python and the Abaqus ScriptingInterface and gives users more hands on exposurewith practically oriented workshops of moderatecomplexity. This course also provides pointers for morespecialized and advanced topics.ObjectivesUpon completion of this course you will be able to:- Help students to develop a high level understandingof the Abaqus scripting capabilities and gain someproficiency.- Organize and present the deeper technical detailsof Python and the Abaqus Scripting Interface.- Expose the strengths and weaknesses of Abaqusscripting.- Encourage the student to use scripting in newways.- This advanced seminar will take a deeper dive into:- The Abaqus Scripting Interface (ASI)- The core functionality of the Python language andlibrariesPrerequisitesExperience scripting with Python and Abaqus isrecommended.6 / 87
Learning Experience Course CatalogAdvanced Abaqus ScriptingAvailable OnlineYes7 / 87
Learning Experience Course CatalogAnalysis of Composite Materials with AbaqusCourse CodeSIM-en-MAT-A-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionComposite materials are used in many designapplications because of their high stiffness-to-weightratios. This seminar shows you how to use Abaquseffectively to model composite materials.ObjectivesUpon completion of this course you will be able to:- Define anisotropic elasticity for combining thefibermatrix response- Define composite layups- Model progressive damage and failure incomposites- Model delamination and low-cycle fatigue ofcomposite structures- Model sandwich composite structures and stiffenedcomposite panelsPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes8 / 87
Learning Experience Course CatalogAnalysis of Geotechnical Problems with AbaqusCourse CodeSIM-en-GEOT-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceThis seminar is recommended for engineers withexperience using Abaqus/Standard.DescriptionParticipants are given an overview of modelinggeotechnical problems. Experimental testing andhow it relates to the calibration of constitutive modelsfor geotechnical materials is reviewed. The seminarteaches users how to use and calibrate the differentgeotechnical material constitutive models available inAbaqus and discusses the limitations of these models.The coupling between fluid flow and stress/deformationin the analysis of porous media is also considered.Modeling issues related to geotechnical problems areaddressed and numerous illustrative examples areexaminedObjectivesUpon completion of this course you will be able to:- An overview of modeling geotechnical problems- Experimental testing and how it relates to thecalibration of constitutive models for geotechnicalmaterials- How to use and calibrate the different geotechnicalmaterial constitutive models available in Abaqus- The limitations of these models- The coupling between fluid flow and stress/deformation in the analysis of porous media- Modeling issues related to geotechnical problemsPrerequisitesNone9 / 87
Learning Experience Course CatalogAnalysis of Geotechnical Problems with AbaqusAvailable OnlineYes10 / 87
Learning Experience Course CatalogAutomotive NVH with AbaqusCourse CodeSIM-en-NVH-A-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis course focuses on applying the linear dynamicscapabilities in Abaqus to NVH-related simulation.ObjectivesUpon completion of this course you will be able to:- Perform natural frequency extractions- Perform sound radiation analyses (acoustics)- Include nonlinear preloading effects in your NVHsimulations- Perform Brake squeal analyses- Create constraints and connections for AutomotiveNVH models- Use substructuring techniques to run your NVHsimulations more efficiently- Perform advanced NVH postprocessing (viaplugins)PrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes11 / 87
Learning Experience Course CatalogBuckling, Postbuckling and Collapse AnalysisCourse CodeSIM-en-BUCK-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis course blends the theoretical background on suchtopics as geometric nonlinearity and the Riks methodtogether with examples, guidelines and workshops.ObjectivesUpon completion of this course you will be able to:- Perform linear eigenvalue buckling analysis- Perform postbuckling analysis using the regular anddamped static solution procedures- Perform postbuckling analysis using the modifiedRiks method- Perform postbuckling analysis using dynamicssolution proceduresPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes12 / 87
Learning Experience Course CatalogComposites Modeler for Abaqus/CAECourse CodeSIM-en-CMA-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceThis is an advanced seminar for users who are alreadyfamiliar with the native Abaqus/CAE compositesmodeling functionality.DescriptionThis is an advanced seminar for users who are alreadyfamiliar with the native Abaqus/CAE compositesmodeling functionality. Therefore, the Analysisof Composite Materials with Abaqus seminar isrecommended as a prerequisite. At the very least,attendees should be familiar with the Abaqus/CAEcomposite layup functionality. Attendees should also becomfortable postprocessing the results of compositessimulations using Abaqus/CAE. An understanding ofhow composites are manufactured is also helpful.ObjectivesIn this course you will learn about:- Composites Modeler for Abaqus/CAE, an add-onproduct to Abaqus/CAE- How to use Composites Modeler for Abaqus/CAE to account for accurate fiber angles and plythicknesses in Abaqus simulations to achieveunprecedented accuracy- How to review and quickly modify your compositesmodels to iteratively improve your designs- How to use your composites model to generatemanufacturing data thereby ensuring that theanalyzed model closely corresponds to the realstructure13 / 87
Learning Experience Course CatalogComposites Modeler for Abaqus/CAEPrerequisitesThe Analysis of Composite Materials with Abaqusseminar is recommended as a prerequisite. At thevery least, attendees should be familiar with theAbaqus/CAE composite layup functionality. Attendeesshould also be comfortable post-processing the resultsof composites simulations using Abaqus/CAE. Anunderstanding of how composites are manufactured isalso helpful.Available OnlineYes14 / 87
Learning Experience Course CatalogCo-simulation with Abaqus and DymolaCourse CodeSIM-en-DYM-A-30-2018Available ReleaseSIMULIA 2018Duration4 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionAbaqus-Dymola co-simulation is useful when logicalmodeling needs to be included in a physical systemsimulation; for example, it can be used to coupleAntilock Braking System (ABS) logic modeledin Dymola with an Abaqus rolling tire and brakesimulation.ObjectivesUpon completion of this course you will be able to:- Set up an Abaqus model for Abaqus-Dymolacosimulation- Create a simple control system in Dymola- Run a co-simulationPrerequisitesNoneAvailable OnlineYes15 / 87
Learning Experience Course CatalogCrashworthiness Analysis with AbaqusCourse CodeSIM-en-CRASH-A-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelAdvancedAudienceNew and experienced users of Abaqus who willperform structural crashworthiness or occupant safetysimulations.DescriptionThis course is the ideal way to obtain a workingknowledge of how to use Abaqus for crashworthinessanalysis.ObjectivesUpon completion of this course you will be able to:- Abaqus fundamentals and input syntax- General "automatic" contact modeling- Element selection for crash simulation- Constraints and connections modeling- Material models used in crash simulation- Multiple mechanism damage and failure modelingPrerequisitesNo previous knowledge of Abaqus is required,but knowledge of finite elements and engineeringmechanics is necessary.Available OnlineYes16 / 87
Learning Experience Course CatalogCZone for AbaqusCourse CodeSIM-en-CZA-A-30-2018Available ReleaseSIMULIA 2018Duration4 hoursCourse MaterialEnglishLevelAdvancedAudienceEngineers with experience using Abaqus/ExplicitDescriptionBy attending this half-day class you will learn how toinclude crushable composite structures in your impactsimulations.ObjectivesUpon completion of this course you will be able to:- Include crushable composite structures in yourimpact simulations- Understand guidelines for defining crushablecomposite materials based on composite couponand component testing- Incorporate crushable composite structures intoyour models and how to postprocess CZA analysisresultsPrerequisitesThe Abaqus/Explicit: Advanced Topics and Analysisof Composite Materials with Abaqus seminars arerecommended as prerequisitesAvailable OnlineYes17 / 87
Learning Experience Course CatalogElectromagnetic Analysis with AbaqusCourse CodeSIM-en-EMAG-A-30-2018Available ReleaseSIMULIA 2018Duration8 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionAbaqus provides computational electromagneticcapabilities for the simulation of problems involvingsteady-state electrical conduction, piezoelectricphenomena and low-frequency eddy currents. In thiscourse, you will learn how to analyze low frequencyeddy current problems in Abaqus/Standard.ObjectivesUpon completion of this course you will be able to:- Set up and create electromagnetic models withAbaqus- Perform low frequency eddy current analyses withAbaqus- Perform transient eddy current analyses withAbaqus- Perform magnetostatic analyses with AbaqusPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes18 / 87
Learning Experience Course CatalogElement Selection in AbaqusCourse CodeSIM-en-ELEMC-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis course provides a brief overview of thedistinguishing characteristics of the wide range ofcontinuum and structural elements available in Abaqusfor stress analyses. It explains modeling features thatmay cause certain types of elements to behave poorly.ObjectivesUpon completion of this course you will be able to:- Understand the distinguishing characteristics of thewide range of continuum and structural elementsavailable in Abaqus for stress analyses- Understand modeling features that may causecertain types of elements to behave poorly- Choose appropriate element types for differentapplications including the effects of fully or nearlyincompressible material behavior, contact, bending,etc.PrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes19 / 87
Learning Experience Course CatalogFitness-for-Service Analysis with AbaqusCourse CodeSIM-en-FFSA-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse ent Reliability EngineersDescriptionPressure vessels and piping equipment are periodicallyassessed based on guidelines prescribed bydocuments such as ASME/API-579 Fitness-for-Service(FFS). Finite element based Level – 3 assessmentsare often utilized to assess equipment with complexgeometries and loading conditions. The coursediscusses methods for modeling common pressurevessels such as distillation towers, storage vessels,etc. using Abaqus/CAE. Methods for the applicationand verification of loads such as weight of contents,internal pressure, etc. using Abaqus/Standard, asrequired for Level-3 FFS assessments, are alsodiscussed. Procedures for analyzing metal loss usingthe finite element method by mapping thicknessreadings from scans are also discussed.ObjectivesUpon completion of this course you will be able to:- Use Abaqus/CAE to create finite element models ofcommon plant structures.- Use Abaqus/CAE to submit and monitor analysisjobs.- Use Abaqus to perform buckling, elastic-plasticanalyses.PrerequisitesNone20 / 87
Learning Experience Course CatalogFitness-for-Service Analysis with AbaqusAvailable OnlineYes21 / 87
Learning Experience Course CatalogFlexible Multibody Systems with AbaqusCourse CodeSIM-en-FLEX-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThe goals of this course are to explore the varietyof connection types available in Abaqus and tounderstand how to define connections that suit yourneeds.ObjectivesThe topics include:- Comparison of connectors and MPCs- Basic connector components- Assembled kinematic connections- Local relative displacements and rotations- Defining stops and locks- Defining connector friction- Connector failure- Actuating components of relative motion- Sensors and actuators- Output and postprocessingPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes22 / 87
Learning Experience Course CatalogFSI Simulation Using Abaqus and 3rd Party CodesCourse CodeSIM-en-FSI-A-30-2018Available ReleaseSIMULIA 2018Duration8 hoursCourse MaterialEnglishLevelAdvancedAudienceThis seminar is recommended for both structural andCFD engineers with an interest in evaluating andanalyzing real world FSI applications.DescriptionThis seminar provides an introduction to the FSIcapability using 3rd-party CFD codes, with anemphasis on enabling users to get started utilizingthe capability effectively. Several examples usingboth Abaqus/Standard and Abaqus/Explicit are usedthroughout the seminar to illustrate the types ofproblems that can be solved.ObjectivesUpon completion of this course you will be able to:- Evaluate FSI applications- Create compatible FE and CFD models for FSI- Run FSI problems- Develop co-simulation strategies- Use time incrementation optionsPrerequisitesNoneAvailable OnlineYes23 / 87
Learning Experience Course CatalogGUI Customization with AbaqusCourse CodeSIM-en-GUIC-A-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelAdvancedAudienceUsers interested in modifying and extending thecapabilities of Abaqus by customizing their AbaqusinterfaceDescriptionThis course introduces the Abaqus GUI Toolkit througha combination of lectures, examples and workshops.ObjectivesThe goal of this course is to train you to use theAbaqus GUI Toolkit to customize the Abaqus/CAEinterface or build your own applications- Learn how to build dialogs and issue commandsfrom the GUI- Learn how to create and modify GUI modules andtoolsets- Learn how to create custom applicationsPrerequisitesThis seminar assumes prior knowledge of thePython programming language and the Abaquskernel commands. Thus, students must attend theIntroduction to Abaqus Scripting seminar prior toattending this class. Experience with object-orientedprogramming and GUI toolkits is recommended, butnot required.Available OnlineYes24 / 87
Learning Experience Course CatalogHeat Transfer and ThermalStress Analysis with AbaqusCourse CodeSIM-en-HEAT-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThe success of many structural designs requiresa thorough understanding of both the thermal andmechanical response of the design. Temperaturedependent material properties, thermally-induceddeformation, and temperature variations all may beimportant design considerations.ObjectivesUpon completion of this course you will be able to:- Perform steady-state and transient heat transfersimulations- Solve cavity radiation problems- Model latent heat effects- Perform adiabatic, sequential, and fully coupledthermal-stress analyses- Model contact in heat transfer problemsPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes25 / 87
Learning Experience Course CatalogIntroduction to AbaqusCourse CodeSIM-en-ABI-F-30-2018Available ReleaseSIMULIA 2018Duration32 hoursCourse MaterialEnglishLevelFundamentalAudienceSimulation AnalystsDescriptionThis course is a comprehensive and unifiedintroduction to the modeling and analysis capabilitiesof Abaqus. It teaches you how to solve linear andnonlinear problems, submit and monitor analysisjobs and view simulation results using the interactiveinterface of Abaqus.ObjectivesUpon completion of this course you will be able to:- Use Abaqus/CAE to create complete finite elementmodels.- Use Abaqus/CAE to submit and monitor analysisjobs.- Use Abaqus/CAE to view and evaluate simulationresults.- Solve structural analysis problems using Abaqus/Standard and Abaqus/Explicit, including the effectsof material nonlinearity, large deformation andcontact.PrerequisitesNoneAvailable OnlineYes26 / 87
Learning Experience Course CatalogIntroduction to Abaqus/CAECourse CodeSIM-en-ICAE-F-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialsEnglish , JapaneseLevelFundamentalAudienceSimulation AnalystsDescriptionAbaqus/CAE provides a complete interactiveenvironment for creating Abaqus models, submittingand monitoring analysis jobs and viewing andmanipulating simulation results.ObjectivesUpon completion of this course you will be able to:- Use Abaqus/CAE to create complete finite elementmodels.- Use Abaqus/CAE to submit and monitor analysisjobs.- Use Abaqus/CAE to view and evaluate simulationresultsPrerequisitesNoneAvailable OnlineYes27 / 87
Learning Experience Course CatalogIntroduction to Abaqus/Standard and Abaqus/ExplicitCourse CodeSIM-en-IABA-F-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelFundamentalAudienceSimulation AnalystsDescriptionThis introductory course is the ideal way to obtaina working knowledge of how to use both Abaqus/Standard and Abaqus/Explicit to solve linear andnonlinear problems. The seminar introduces you tothe analysis capabilities of Abaqus using the keywordsinterface.ObjectivesUpon completion of this course you will be able to:- Complete finite element models using Abaquskeywords.- Submit and monitor analysis jobs.- View and evaluate simulation results.- Solve structural analysis problems using Abaqus/Standard and Abaqus/Explicit, including the effectsof material nonlinearity, large deformation andcontact.PrerequisitesNoneAvailable OnlineYes28 / 87
Learning Experience Course CatalogIntroduction to Abaqus ScriptingCourse CodeSIM-en-ISRPT-F-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelFundamentalAudienceAudience Simulation AnalystsDescriptionThis seminar covers basic usage of the AbaqusScripting Interface and Python’s syntax. It includesnumerous hands-on exercises for the student to learnto automate tasks that are common to most analysts.ObjectivesUpon completion of this course you will be able to:- Help students to develop a high level understandingof the Abaqus scripting capabilities.- Organize and present the technical details ofPython and the Abaqus Scripting Interface.- Expose the strengths and weaknesses of Abaqusscripting.- Encourage the student to use scripting in newways.PrerequisitesNoneAvailable OnlineYes29 / 87
Learning Experience Course CatalogLinear Dynamics with AbaqusCourse CodeSIM-en-LNDYN-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis course introduces the user to the algorithms andmethods used to study linear dynamic problems withAbaqus/Standard.ObjectivesUpon completion of this course you will be able to:- Extract eigenmodes about a certain frequency- Determine whether the number of extractedeigenmodes is sufficient to represent the structure'sresponse adequately- Perform transient, steady-state, responsespectrum and random response analyses using theeigenmodes- Use multiple base motions- Apply damping in linear problemsPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes30 / 87
Learning Experience Course CatalogMetal Forming with AbaqusCourse CodeSIM-en-METF-A-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelAdvancedAudienceThis course is recommended for engineers withexperience using AbaqusDescriptionMetal forming processes are highly nonlinearbecause they involve geometric, material and contactnonlinearities.ObjectivesIn this course you will learn practical modeling skillsand techniques for:- Stamping- Hydroforming- Punch stretching- Forging- Rolling- Drawing- Superplastic formingPrerequisitesNoneAvailable OnlineYes31 / 87
Learning Experience Course CatalogMetal Inelasticity in AbaqusCourse CodeSIM-en-METAL-A-30-2018Available ReleaseSIMULIA 2018Duration16 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis seminar provides a brief overview of the inelasticbehavior observed in metals and the basic concepts ofplasticity theory.ObjectivesUpon completion of this course you will be able to:- Metals that show inelastic work hardening- The Bauschinger effect- "Ratchetting" and relaxation of the mean stressunder cyclic loading- Strain-rate-dependent inelastic behavior- Temperature-dependent plasticity- Heat generated by plastic deformation- Ductile failure of metallic materials- Plastic behavior in porous and brittle (cast iron)metals- Creep behavior in metalsPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes32 / 87
Learning Experience Course CatalogModeling Contact and ResolvingConvergence Issues with AbaqusCourse CodeSIM-en-MCRC-A-30-2018Available ReleaseSIMULIA 2018Duration24 hoursCourse MaterialEnglishLevelAdvancedAudienceSimulation AnalystsDescriptionThis 3-day course provides an in-depth discussion onsolving nonlinear problems in Abaqus/Standard with anemphasis on modeling and convergence-related issuesfor contact. Engineers at Abaqus have developedmany techniques and guidelines for solving challengingcontact problems. Convergence issues related tocomplicated material models and geometricallyunstable behavior are also covered. Many years ofpractical experience in understanding and resolvingconvergence issues have been condensed into thiscourse.ObjectivesUpon completion of this course you will be able to:- Define general contact and contact pairs- Define appropriate surfaces (rigid or deformable)- Model frictional contact- Model large sliding between deformable bodies- Resolve overclosures in interference fit problems- Understand how nonlinear problems are solved inAbaqus- Develop Abaqus models that will converge- Identify modeling errors that cause models toexperience convergence difficulties- Recognize when a problem is too difficult or tooillposed to be solved effectively33 / 87
Learning Experience Course CatalogModeling Contact and ResolvingConvergence Issues with AbaqusPrerequisitesThis course is recommended for engineers withexperience using AbaqusAvailable OnlineYes34 / 87
Learning Experience Course CatalogModeling Contact with Abaqus/StandardCourse CodeSIM-en-CONT-A-30-2018Available Relea
Buckling, Postbuckling and Collapse Analysis 12 Composites Modeler for Abaqus/CAE 13 Co-simulation with Abaqus and Dymola 15 Crashworthiness Analysis with Abaqus 16 CZone for Abaqus 17 Electromagnetic Analysis with Abaqus 18 Element Selection in Abaqus 19 Fitness-for-Service Analysis with Abaqus 20
3. JBL OR300 Manual OR300 Quick Start Guide 1. What’s in the box OR300. 4. JBL Jembe Manual JBL Jembe Manual TWO-PIECE SPEAKER SYSTEM EASY SETUP GUIDE The. 5. JBL L226W Manual JBL L226W Manual THANK YOU FOR CHOOSING JBL, INC. For. 6. JBL PartyBox On-The-Go Manual PARTYBOX ON-THE-GO OWNER’S MANUAL IMPORTANT SAFETY INSTRUCTIONS
The JBL SSW-4 Subwoofer is intended for use with only the JBL SDA 8300 amplifier (sold separately). IMPORTANT! All crossover settings are contained on a DSP preset file that should be downloaded from the JBL SSW-4 product webpage at www.jblsynthesis.com. Install the file on the SDA 8300 JBL amplifie
Jbl mrx 515 25,00 line array jbl VTX A12 125,00 jbl VTX A8 70,00 Bas speakers jbl mrx 518 sub 25,00 jbl VTX S28 80,00 Weergave sets Weergave sets front Jb
JBL VRX AF Arrayframe für bis zu 6x VRX932LA JBL SRX 728S Subwoofer; 2X18" 1600/3200/6000W JBL MRX 512M Multifunktionslautsprecher 12"/1,5" 400/800W 70X70 JBL MRX 515 Lautsprecher 15"/1,5" 400/800W 70X70 JBL MRX 518S Subwoofer
Output: F.O.H.: Mid/Hi: L&R - 2 x JBL SRX 722 C - 2 x JBL SRX 712 Lo: C - 1 x JBL SRX 728s (dual 18”) Delay: 8 x JBL Control 28 (2x row of 4 @ 20’ and 40’ from proscenium) Foldback: 4 x JBL G2 Eon (active) 2 x Yamaha Club Series wedges (passive) Amplifiers: F.O.H.: 4
4 JBL ON TIME 200 ID The JBL On Time 200ID high-performance loudspeaker dock and clock radio for iPod will revolutionize the way you listen to your radio, use your iPod, and wake from a good night’s sleep. The JBL On Time 200ID system is a revolution in time travel. Imagine waking up to music on your favorite station or your iPod, with no
4 jbl On TiME 400iHD USER GUiDE jbl On TiME 400iHD HD/am/fm sPeaKer DOcK fOr iPod The compact JBL On Time 400IHD speaker dock is an aesthetically pleasing, high-performance digital sound center that will revolution- ize the way you discover music, listen to your radio and use your iPod.
4 jbl On TIME MIcrO The JBL On Time Micro high-performance loudspeaker dock and clock radio for iPod/iPhone will revolutionize the way you listen to your radio, use your iPod/iPhone, and wake from a good night’s sleep. The JBL On Time Micro system is a revolution in time travel.
