Instruction Manual Vintage Steel Crate
For The ON-THE-GO Pet INSTRUCTION MANUALVINTAGE STEEL CRATEPG5627VC/PG5631VC/PG5636VC/PG5642VCetsFor PnlyOTo see our full line of products, visit us online at: www.petgearinc.comCUSTOMER SERVICE HELP DESKcustomerservice@petgearinc.comToll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
WARNING!FOR PETS ONLY.Not intended to be used as a restraining device for aggressive or dangerous animals that dig,chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damagecaused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposedflame. Failure to follow these warnings and the instructions could result in serious injury or death.AVOIDING SUFFOCATION HAZARDSNever use plastic shipping bags or other plastic film as pad covers not sold and intended for thatpurpose. They can cause suffocation. This product is not intended for commercial use.SETTING UP THE CRATETHIS PRODUCT REQUIRES ADULT ASSEMBLY.Be sure the Crate is completely set up before use.Always follow the instructions in the product instructions to set up the Crate.Before each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges.Do not use the Crate if any parts are missing or broken.Call PET GEAR at 1-877-752-9123 for replacement parts. Use only PET GEAR replacement parts.Visit our website www.petgearinc.com to view or download the product instructions.Do not substitute parts.USING THE CRATERemove collar and leashes while using this product. The Crate is for playing or sleeping. When used forplaying, never leave pet unattended and always keep pet in view. When used for sleeping, you must stillprovide the supervision necessary for the continued safety of your pet. Always keep the Crate away fromhazards in the area that may injure your pet. DO NOT leave pet in product for prolonged periods of time.2VINTAGE STEEL CRATEPG5627VC/PG5631VC/PG5636VC/PG5642VC
PARTS LISTCrateCRATE ASSEMBLYFigure A.Step 1. Remove the folded steel crate fromthe carton as shown in Figure A.Step 2. Grab any wire on the top panel andturn it like the page of a book.Then grab the steel crate with both hands andpull upwards. This will form the top and sides(shown in Figure B.)Figure B.VINTAGE STEEL CRATEPG5627VC/PG5631VC/PG5636VC/PG5642VC3
CRATE ASSEMBLYStep 3. Reach in the crate and pull the endpanel toward you, in an up and out motion,(shown in Figure C and D).Figure C.Figure D.Pull Up and OutPull Up From the Bottom, and OutStep 4. Pull end panel up, until it fits into the clips on the ends of the side panels. See Figures E & F.To secure the end panel to the top panel, gently pull forward on the end panel while pushing down on thetop panel. Then, fit the hooks over the end wire on the top. See Figures E & F.To disassemble, reverse this process.Figure F.Figure E.4VINTAGE STEEL CRATEPG5627VC/PG5631VC/PG5636VC/PG5642VC
CRATE ASSEMBLEDFigure G shows the crate fully assembled.Figure G.TO USE FRONT DOOR LATCHTo Unlock: Grab onto the latch to pull pin out oflocking mechanism.To Lock: Push pin into locking mechanism.Figure H.TO USE TOP DOORStep 1. Stand beside the crate; the sidethat is closest to the latches works best.Lift up latches and slightly tilt themtowards each other at a 45 degree angle(shown in Figure J).Step 2. Pull latches towards you untilthey are no longer touching the top door.Lift up on door to open.Step 3. To close door, just reverse thisprocess.VINTAGE STEEL CRATEPG5627VC/PG5631VC/PG5636VC/PG5642VCFigure J.5
REPLACEMENT PARTSPlease have your model number ready before calling. Use only PET GEAR replacement parts.PO Box 99West Rutland, VT 05777877-752-9123www.petgearinc.com6VINTAGE STEEL CRATEPG5627VC/PG5631VC/PG5636VC/PG5642VC
Be sure the Crate is completely set up before use. Always follow the instructions in the product instructions to set up the Crate. Before each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. Do not use the Crate if any parts are missing or broken. Call PET GEAR at 1-877-752-9123 for replacement parts.
2 THE OTHER DOOR GENERATION II STEEL CRATE PG5927B/PG5936B/PG5942B PARTS LIST CRATE ASSEMBLY Step 1. Remove from box and carry bag. Step 2. Place crate on ground as shown, so the PET GEAR logo on the bottom (black part) is facing toward you. (Figure A.) Top Locks. One on each side. Crate Matching Bolster Pad Wheels Handle A. B.
part 1 insight into crate-training 1. a definition of crate-training 15 2. the necessity of a dog crate 16 part 2 preparations 3. the breeder's part 24 4. reducing a dog crate's size 26 5. places for dog crates in the house 29 part 3 the first day and night 6. transport 35 7. introducing the dog crate 38 8. the first day(s) and night(s) 49
Introducing your dog to the crate Top tips: Make the crate comfortable before showing it to your dog. Introduce the crate as a step-by-step process, over several days if possible. Handle your dog gently throughout the crate introduction process, and keep your voice kind and positive.
A 40-kg packing crate is pulled by a rope as shown. The coefficient of static friction between the crate and the floor is 0.35. If α 40 , determine (a) t he magnitude of the force P required to move the crate, (8 ) (b) whe ther the crate will slide or tip. (9 ) (c ) the friction force between the packing crate and the floor. (3 )
vintage wood hd porcelain tile packaging information description item code lbs/box pcs/box sqft/box boxes/skid sqft/skid 6" x 36" vintage wood dune hd porcelain tile 62-700 48.2181239468 6" x 24" vintage wood dune hd porcelain tile 62-500 55.01141440560 6" x 36" vintage wood ash hd porcelain tile 62-703 48.2181239468 6" x 24" vintage wood ash hd porcelain tile 62-503 55.01141440560
Crate HEMI kits may not be used in place of a regulated or certified nonroad engine (such as in marine applications). Installation of a Crate Hemi engine in violation of these Instructions will void any applicable MOPAR warranty. 5.7L & 6.4L engines from 2013-2016 Challenger/Charger/300 may be comparable to a Crate
ship or on the deck. For easy passage of a crate through the average hatchway and into the hold, the outside dimensions should not exceed 41 feet in length, 9 feet in width, and 7 feet in height. Any crate larger than this will likely be placed on 2 the deck. A sheathed crate with a waterproof top
Nom de l'Additif Alimentaire Fonction(s) Technologique(s) 340(iii) Phosphate tripotassique Adjuvant, antiagglomérant, antioxydant, régulateur de l'acidité, agent de rétention de la couleur, émulsifiant, affermissant, exaltateur d'arôme, agent de traitement des farines, humectant, agent de conservation, agent levant, séquestrant, stabilisant et épaississant 341 Phosphates de calcium .
