Panasonic KX-T2310 Operating Instructions - Textfiles

PanasonicINTEGRATEDTELEPHONE SYSTEMEASA-PHONEmMODEL NO.Please read before useLa referencia rApida en espafiolpuede ser encontrada en las paginas 16 - 18.KX-T23 10

FeaturesThank you for purchasing the Panasonic Telephone.The KX-T2310 features include:n Local ModeThe unit can be set to prohibit the user from making long-distanceoverseas calls.W One-Touch/SpeedandDialingfor up to 20 16-digit telephone numbers plus 8 one-touch automatic dialingbuttons.H One-TouchRedialfor the last dialed number every time the redial button is pressed,n Switchable Tone/Pulsefor compatibilitySettingswith tone-actuatedcomputersystems and any phone line

W One-Touch Tone Switchinglets you temporarilyswitch to tone from pulse mode by pressing a button.W Electronic Holdto hold your calling party --- can be released just by lifting the handset ofthe unit or any extension.W Timed Flash (700 ms) Memoryfor automatic dialing and special telephone company services, such as callwaiting.n 3-Step Ring-Volumeto set Off/Low/HighControlring-volumelevel.

PrecautionsBefore using this unit, please read theseoperating instructions carefully.Take special care to follow the warningindicated on the unit itself as well as thesafety suggestions listed below.InstallationsEnvironment1) Water and Moisture: Do not use thisunit near water - for example, neara bath tub, washbowl, swimmingpool, or the like. Damp basementsshould also be avoided.2) Heat: The unit should be situatedaway from heat sources such asradiators and the like. It also shouldnot be placed in temperatures lessthan 41 “F (5 C) or greater than 104 F(40 C).Placement1) Ventilation: The unit should besituated so that its location or positiondoes not interfere with its properventilation. Allow 4” (10 cm)clearance around the unit.2) Foreign Material: Care should betaken so that objects do not fall intoand liquids are not spilled into theunit. Do not subject this unit toexcessive smoke, dust, mechanicalvibration, or shock.3) Magnetism: The unit should besituated away from equipment ordevices that generate a strongmagnetic field.4) Stacking: Do not place heavy objectson top of this unit.5) Surface: Place the unit on a flat levelsurface.If there is any trouble, disconnect theunit from the telephone line and connecta known working phone. If the knownworking phone operates properly, haveyour Panasonic phone repaired by oneof the specified Panasonic FactoryService Centers. If the known workingtelephone does not operate properly,consult with your telephone company.For your future referenceSerial No.Name of DealerDate of PurchaseDealer’s Address(found on the bottom of the unit)

Important InformationThis telephone provides magneticcoupling to hearing aids.In the event terminal equipmentcauses harm to the telephone network,the telephone company should notifythe customer, if possible, that servicemay be stopped. However, where priornotice is impractical, the companymay temporarily cease serviceproviding that they:“This equipment has been tested and foundto comply with the limits for a Class Bcomputing device in accordance with thespecifications set forth insubpart J or Part15 of the FCC Rules. If this equipment doescause interference to radio or televisionreception which can be determined byturning the equipment on and off, use theequipment in another location and/or utilizean electrical outlet different from that usedby the receiver.”(a) Promptly notify the customer.(b) Give the customer an opportunityto correct the problem with theirequipment.(c) Inform the customer of the right tobring a complaint to the FederalCommunication Commissionpursuant to procedures set out inF.C.C. Rules and RegulationsSubpart E of Part 68.The Telephone Company may makechanges in its communicationsfacilities, equipment, operations orprocedures, where such action isreasonably required in the operationof its business and is not inconsistentwith the rules and regulations in F.C.C.Part 68. If such changes can bereasonably expected to render anycustomer terminal equipmentincompatible with telephone companycommunications facilities, or requiremodification or alteration of suchterminal equipment, or otherwisematerially affect its use orperformance, the customer shall begiven adequate notice in writing, toallow the customer an opportunity tomaintain uninterrupted service.Ringer Equivalence No. (REN):The REN is useful to determine the quantityof devices you may connect to yourtelephone line and still have all of thosedevices ring when your telephone numberis called. In most, but not all areas, the sumof the REN’s of all devices connected to oneline should not exceed five (5.0). To becertain of the number of devices you mayconnect to your line, as determined by theREN, you should contact your localtelephone company to determine themaximum REN for your calling area.‘If you ship the productCarefully pack and send it prepaid,adequately insured and preferably in theoriginal carton.Attach a postage-paid letter, detailing thecomplaint, to the outside of the carton.Do NOT send the product to the Executiveor Regional Sales offices. They are NOT, equippped to make repairs.If requested by the Telephone Company,infrom them as follows:l FCC RegistrationNo. . . . . . . . . (found on the bottom of the unit)l Ringer Equivalence. . . . 1 .OB*The particular telephone‘line to whichthe equipment is connected.WARNING:TO PREVENT FIRE OR SHOCKHAZARD, DO NOT EXPOSE THISPRODUCT TO RAIN OR ANY TYPEOF MOISTURE.Iv

ContentscPreparationIOperationIGeneral1

.FeaturesI.PrecautionsImportant InformationIll.ContentsIvLocation of controls and jack .13Connection5.Initial settingsMaking Calls (Manual Operation).ReceivingAutomatic6DialingOther Operations8.11Guide.Accessory Order InformationWall Mounting.Referencia rapida.DialingTroubleshooting7.Special Phone Company ServicesCombination71314141415. l62

Location of controls and jack3

@Direct Call Button@MemoryCard@Auto/Store: They are used to store telephone number and tomake call by one-touch dialing.: The instructions for storing telephone numbers intomemory and dialing are printed on this Card. You mayalso use the reverse for writing telephone numbers.Button: It is used to store and dial telephone number forspeed dialing.@Program Button : It is used to program telephone number.@Pause Button : It is used to insert pause into dial.@ Redial Button : It is used to r,edial the last dialed telephone number.@Store/Hold Indicator@Hold Button : It is used to put the calling party on hold during aconversation.@Flash Button@Telephone: It is used to access some of the features of your hostPBX and your telephone company.Line Jack fLocal Call Only Switch :See page 6.Accessories:Telephoneline cordOneHandset4OneHandset cordOnez4miiC2

ConnectionModular Jack forsingle line (RJllC)W This unit may not be connected to a coin operated line. If you are on a partyline, check with your local telephone company.n Do not use any handset other than Panasonic handset made for the modelKX-T231 O/KX-T2315.5

Initial Settings(found on the bottomOnly SwitchNormal dialing can be operated.The manual or automatic dialingoperation of a number with morethan 7 digits is not possible.Ringer Volume SelectorSet to “HIGH”.LOW: The ringing sound will be low.OFF: The telephone will not ring.DlALlNG MODEPULSEllDialing Mode SelectorSet to “Tone”.If dialing can not be done, set to “PULSE”.TONE6

Making Calls (Manual Operation)1 Lift the handset.2 Dial the telephonenumber.Speak to the other party.34 Hang up when you are finished.Receiving1 Lift the handset.Speak to the other party.3 Hang up when you are finished.7

Automatic Dialingn There are 20 memory stations, each station is capable of storing 16 digits.W There are 8 Direct Call buttons, each capable of storing 16 digits.Each Dialing button serves as a memory station.1 Lift the2handset.Press PROGRAM button.0 Store indicator flashes,To store a phone number.n Home UsePress Station No.34lPhone numbers can be stored intomemory stations m /7-] to vj /-S-j,Press the telephone number.Press AUTO/STORE5button.0 Phone numbers can be stored intomemory stations m [il to m mfollowing the same procedure.lYou may use the Direct Call button instead of pressing the stationnumber.n Office Use (PBX)(e.g. . line access number 9)12Lift the handset.Press PROGRAM button. (Store indicator flashes)8

Automatic Dialing (cont.)34Press Station No. ( 101 111 - 121 101 )Press Line access numberq.Press PAUSE button.6 Press the telephone7 Press AUTO/STORElnumber.button.You may use the Direct Call button instead of pressing the stationnumber.After storing all the numbers,Press PROGRAM.lThe Store Indicator goes out.1 Lift thehandset.Press AUTO/STORE3 Press Station No.l4pJm-pior press Direct Call button.fcHang up when you are finished.9button.

Press PROGRAM if you noticean error.Repeat all the steps of “Storing PhoneNumbers”.lExample:To erase the number in memory station m1 Lift the2:handset.Press PROGRAM button.The Store Indicator flashes.l3mPress Station No.q q.Or the direct call button wherethe telephone number that youwant to erase is stored.4Press AUTO/STORE5Press PROGRAM button.button.Be sure the handset is off the cradle.1Enter the same number into the same memory station.2After AUTO/STOREbutton is pressed;lWhen the Store Indicator blinks once, the new stored number is differentfrom the old one.lWhen the Store Indicator blinks twice, the new stored number is thesame as the old one.10

Other OperationsPress REDIAL button when theline is busy.lPressing the REDIAL button enables youto redial once.The PAUSE button function is neededbehind the PBX for outside line access ora computer accessed dial tone.When you press the PAUSE button, youcan dial the phone number withoutwaiting for the line access.n One pause is required when waitingfor an outside dial tone.Example (PBX):Phone No.Line Access No.Some PBXs require this “PAUSE”during an automatic redial.If you want to change from pulse modeinto tone mode during dialing, the TONEbutton can be used instead of changingthe Dialing Mode selector.11

Other Operation (cont.)7-o Place a Call on Holdwhile having a conversation,Press HOLD button.12lThe HOLD Indicator blinks slowly.You may hang up the handset.lThe caller will not be disconnected.To Release Holdn When the handset is being lifted1 PressHOLD button again.Speak to the calling party.n When the handset is on the cradle1Lift the handset.2Speak to the calling party.Parallel ConnectionTo release a hold using another telephoneLift the handset of the othertelephone.12connectedon the same line:

Special Phone Company ServicesThe Flash button can be used for CALL WAITING.For more details about obtaining “CALL WAITING” service, contact yourtelephone company.CALL WAITING12While having a conversation,another party calls and a tone is heard.e-&g@“rP1Press FLASH button lightly.lI The first conversation is placed onhold and the second call can beanswered.Press FLASH button lightlyagain.lYou will be able to speak to the firstcaller again and the second call isplaced hold.lIf the calling party on hold hangs up,the line is terminated.n You may access some features of your PBX using the Flash button insteadof the hookswitch. Press the Flash button lightly in the dialing operation. The“Flash” can be stored into memory in the same way as “Storing PhoneNumbers” on page 8.The memory station can be programmed to automatically access features ofyour host PBX. Press the Flash button lightly at the position where thehookswitch operation is required in a dialing operation when programminginto a memory station.13