HD CTL 100 With Logitech Tap Setup Guide - Extron

eNT:RTA.com for thtionOPIMtrontallaw.ex uide, ins ations.o wwcGo t te user g specifielndpa,msoncuctioinstrHD CTL 100 Workspace Controller Setup GuideAttaching a Logitech TapHD CTL 100(HDMI & CEC)This supplementary setup guide provides instructions forsetting up the HD CTL 100 with the Logitech Tap.TINPUOUTI/O VOUTIR/GS V OUTGLogitech TaplogitechTHles )Front PanelIR / SOUTPUTINPUTTAL/CECGlogitechRC4LogitechMeetUpG HBDIGIHDMIA3Example of Logitech Tap Room SetupRear PanelHDMI/CECGSThe front and rear panel connectors include:HDMI224HD CTL 100 PanelsDIGITAL I / OPUTHDMI1NOTE: For more details about installation, configuration,and operation, see the HD CTL 100 User Guide,available at www.extron.com.POWER12V0.3A MAXIntel NUCPOWER0.3A12VMAXThe Extron HD CTL 100 is a compact workspace controllerdesigned for automatic display control in small meetingrooms and huddle spaces. It features an HDMI pass-throughport that detects signal presence and can facilitate automaticdisplay power. When an active signal is connected to theHDMI input from the Logitech Tap, the HD CTL 100automatically turns on the display via CEC control. Whenno signal is detected, the HD CTL 100 powers off the displayafter a predetermined period.1 2 G 3 4 G24 GS GDEFSIGNALCONFIGHD CTL 100IJA Power input connectorE Voltage output connectorH Reset buttonB HDMI input connectorF IR/S control connectorI USB configuration portC HDMI/CEC output connectorG Power LEDJ Signal LEDDigitalI/OportsDFigure 1.HD CTL 100 Rear and Front PanelsConnecting the Logitech Tap to the HD CTL 1001.Connect the supplied Logitech power supply to the Tap Power connector (see figure 2).POWERPowerFigure 2.USB-CUSB-CHDMIHDMIUSB-AUSB-ATap Rear Connections1

HD CTL 100 with Logitech Tap Setup Guide (Continued)2.If needed, the Tap offers the ability for external source devices to be presented on the presentation display, by connecting asource device, such as a laptop, to the HDMI connector of the Tap.NOTE: Figure 4 and figure 5 show the Logitech MeetUp Camera connected to the Intel NUC. The USB-A port on theTap can also be used for the camera connection if desired.4.Connect the supplied Logitech Strong (USB-C to USB-A) cable from the Tap USB-C connection (see figure 2) to one of theIntel NUC USB-A connectors (see figure 3).19V- SSHDMIPowerFigure 3.5.HDMIOutLANUSB-AUSB-CIntel NUC ConnectionsFor a Single Display system, connect an HDMI cable from the Intel NUC HDMI Out connector to the HD CTL 100 Inputconnector (see figure 3 and figure 4).Logitech TapHDMIlogitechLaptopLogitech Strong Cable(USB-C to USB-A)19V- Intel NUCSSHDMIHDMIUSBLogitech MeetUp V OUTIR / S24 GS GOUTPUTDIGITAL I / OINPUTPOWER12V0.3A MAXHDMIHDMI/CEC1 2 G3 4 GHD CTL 100DisplayDil yHDMI/CECFigure 4.2HD CTL 100 Cabling Diagram (Single Display)logitech

6.For a Dual Display system: A second HD CTL and an Extron USBC-HDM/6 (USB-C to HDMI) cable are needed for the second display.Connect an HDMI cable from the Intel NUC HDMI Out to the Input connector of one HD CTL 100.The USBC-HDM/6 cable is connected from the Intel NUC USB C connector to the HDMI Input connector on the secondHD CTL 100 (see figure 3 and figure 5).Logitech TapHDMIlogitechLLaptopLogitech Strong Cable(USB-C to USB-A)19V- Intel NUCSSHDMIUSBC-HDM/6HDMIUSB24 GS GPOWER12V0.3A MAXHDMIHDMI/CEC1 2 G3 4 GDIGITAL I / O V OUTIR / S24 GS GOUTPUTIR / SINPUT V OUTOUTPUTDIGITAL I / OINPUTPOWER12V0.3A MAXHDMIHDMI/CEC1 2 G3 4 GHD CTL 100HD CTL itechogitecitechMODEL 80MODEL 80FLAT PANELDisplayDilFigure 5.FLAT PANELDi lDDisplayHD CTL 100 Cabling Diagram (Dual Display)NOTE: Figure 4 and figure 5 show the laptop (source device), the Logitech Tap, the Intel NUC, HD CTL 100(s), a LogitechMeetUp camera, and the display(s). Each display is controlled via CEC. For displays that have limited or no CEC control,use software to configure the HD CTL 100 to communicate to the display via IR or one-way serial control.3

HD CTL 100 with Logitech Tap Setup Guide (Continued)Logitech Tap System Setup Configuration41.With the Intel NUC power ON, select the More icon (1) on the right of the Tap main presentation window.2.Select Settings (2). (Enter Admin credentials if needed.)3.Select Windows Settings (3) from the menu on the left of the screen.4.From the window to the right of that screen, select Go to Admin Sign-in (4).

5.On the Windows login page, select the appropriate user account to sign in as administrator and enter Admin credentials.Select the Right Arrow (5) when done.6.From the Windows Start menu in the lower left corner, select Settings (6) from the list of applications.7.Select System (7).8.To ensure the system turns off the presentation display when not in use, select Power & sleep on the System menu.The Screen time (8) for display can be set to any specific value. The suggested Screen time is 10 minutes and thesuggested setting for Sleep is Never.9.The Intel NUC outputs a wake display signal to the HD CTL 100 when the Logitech Tap detects motion from the frontwardlocated sensor. The HD CTL 100 then sends a power command to the display, and the Main Skype Room screen is displayedon the display monitor.NOTE: Plugging in a source device, such as a laptop, when the screen is in sleep mode, does not wake the Tap.5

HD CTL 100 with Logitech Tap Setup Guide (Continued)For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see theExtron Safety and Regulatory Compliance Guide on the Extron website. 2019 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.comWorldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.987668-3064-53 Rev. A11 19

6. For a Dual Display system: A second HD CTL and an Extron USBC-HDM/6 (USB-C to HDMI) cable are needed for the second display. Connect an HDMI cable from the Intel NUC HDMI Out to the Input connector of one HD CTL 100. The USBC-HDM/6 cable is connected from the Intel NUC USB C connector to the HDMI Input connector on the second HD CTL 100 (see figure 3 and figure 5).