Slate & Tile Support Insulated Roof Panel System - Nulok Global
Insulated Panel SystemsUK & Republic of IrelandSlate & Tile Support InsulatedRoof Panel SystemCan Support Slate, Ceramic or Solar Tiles, using the InnovativeNulok Batten, Link Channel and Clip System
2KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokSlate & Tile Support InsulatedRoof Panel SystemHigh performance roofing systemwhich can support slate, ceramic orsolar tiles, using the innovative Nulokbatten, link channel and clip system.Kingspan KS1000 TS Slate & Tile Support roof panel,featuring innovative Nulok.Slate & Tile Support is an advanced insulated roofpanel system designed to support either slates or tiles.The system provides all of the advantages of insulatedpanel technology with the aesthetic appeal of atraditional vernacular roof finish.The Nulok Fixing System offers a straightforward,efficient method of installing Natural Slate, NulokSolar Inserts and Ceramic Tiles.
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokThis system provides allof the advantages ofinsulated panel technologywith the aesthetic appealof a traditional vernacularroof finish.The minimum pitch of thesystem is 4 after deflection*.* Roof pitches 4 to 10 subject to technical review and / or testing.KingspanInsulated Panels3
4KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokA Modern Take on theTraditional Vernacular RoofAdvanced Roofing TechnologyCost & Time EfficientThe Slate & Tile Support panel is an advanced insulatedpanel that has been designed to support either slate or tiles.The insulated panel provides U-Values as low as 0.14W/m²Kas a single component, factory-manufactured roof panel.The system combines the roof panel with the battens,channels and clip components for a swift and efficient fixingof slate, ceramic, or solar tiles to complete a more traditional,vernacular aesthetic.This Slate & Tile Support panel has been demonstrated tosave time and costs when compared to a traditional cold roofsystem (MMMF insulation at the joists, timber trusses, felt,battens and slate.Swift Weather-tight EnvelopeOnce installed the envelope is fully weather-tight, allowinginternal fit-out to commence, and creates a ready platform forthe chosen slate or tile system to be installed.
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKingspanInsulated Panels5High Performance RoofingFactory Engineered, Quality, SingleComponent Panel uilding with insulated sandwich panels instead of traditionalBbuilding methods for the roof and facade has importantadvantages. The insulation core, consisting of high-quality rigidfoam with a closed cell structure, is factory-foamed betweentwo steel plates in an optimally controlled environment. Thesesteel faces are finished both on the outside and the inside witha coating of your choice depending on the desired applicationof the building (climate, agricultural environments, etc.). Theresult is a simple and quick to place end product; directlyfinished on both the outside and inside of the building. Theexterior face of the panel provides an ideal platform for theinstallation of the link channels and battens to create a tile orslate finish, without compromising the thermal or structuralperformance of the panel.Thermal PerformanceThe insulated panels from Kingspan have a highly insulatingclosed cell structure within the foam core. The uniquecomposition of the panels guarantees a superior thermalefficiency, both in warm and cold climates compared totraditional multi-layered constructions, build layer by layer onsite. The panels are mounted on the outside of the building andform a thermal shell that not only reduces temperature lossfrom the inside, but also prevents temperature increase fromthe outside. The closed cell structure of the insulation materialprevents the ingress of moisture.Protected PerformanceThe KS1000TS Kingspan Slate & Tile Support Roof System canbe protected for its thermal and structural performance for aperiod of up to 25 years – to find out more about this, pleasespeak to your Area Sales Manager.
6KingspanInsulated PanelsSlate & Tile Support Insulated RoofPanel System KS1000 TSSupported by our end-to-enddesign and installation servicesAs the manufacturer of the complete roof system including allcomponents, we’re with you all the way with services to help savetime and maximise project value and performance.Technical ServicesField Service & TrainingOur technical engineers are a key part of our design anddevelopment process, providing a wide range of technical supportand working with customers on an individual project basis toensure that the correct products are specified and ordered.We recognise that customer staff training is key to maximisingthe performance of our products, there we provide extensiveinstallation training on each of our personal and collective fallprotection systems.UKTel: 0800 587 0090Email: Technical@kingspanpanels.comArea Sales ManagersIrelandTel: 353 (0) 42 96 98529Email: technicalkc@kingspan.netQuotesTo receive a quote and expected lead times for your projectrequirements, please call one of our team on:UKTel: 44 (0) 1352 716400Email: KIPQuotations@kingspan.comIrelandTel: 353 (0) 42 96 98555Email: quotationskc@kingspan.netTo find your nearest area sales manager, simply visit:www.kingspanpanels.co.uk/asm
Slate & Tile Support Insulated RoofPanel System KS1000 TSKingspanInsulated Panels7
8KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKS1000/2000 TS/NulokProduct DataApplicationsAvailable LengthsThe KS1000/2000 TS is an advanced insulated roof panel roofthat has been designed to work in conjunction with theNulok tile roofing system. This system provides all of theadvantages of insulated panel technology with the aestheticappeal of a traditional vernacular roof finish. The minimumpitch of the system is 5.Standard Lengths1.8 – 14.5mLonger Lengths (non-standard)14.5 – 29.3mShorter Lengths (non-standard)Below 1.8mNote: Additional costs and transport restrictions may apply for non-standard lengths.All lengths may change for export (outside of the UK).* Maximum length is 18.3m for a 2 metre ons, Weight & Thermal PerformanceCore Thickness (mm)U-value (W/m2K)Weight (kg/m2) 0.5/0.4 113.714.2The KS1000/2000 TS insulated roof panels have a Thermal Transmittance (U value), calculated using the method required by the Building Regulations Part L2 (England & Wales)and Building Standards Section 6 (Scotland).FireKS1000/2000 TS insulated roof panels are manufactured withan ECOsafe and FIREsafe polyisocyanurate (PIR) core.The external and internal faces of the panel to be Class 0 inaccordance with the Building Regulations when tested toBS 476: Part 6: 2009 and Part 7: 1997. The panel is rated SAAwhen tested to BS 476: Part 3: 2004.M A L SAECO S AF EFIR ES A FEB R E RE EFENENEFIEFEER10 0 % RTHRGYInsulation CoreWABLEThis FIREsafe system has passed all the requirements ofLPS1181: 2014: Part 1: issue 1.2, Series of fire growth testsfor LPCB approval and is certified to LPS1181 Grade EXT-B*.Reaction to fire classification according to BS EN 135011:2007 A1:2009: B-s1,d0.* LPCB is limited to a maximum tile weight of 54 kg/m².
Slate & Tile Support Insulated RoofTile SupportPanel SystemNulokKS1000/2000 TS/NulokEnvironmentalMaterialsKingspan Insulated Panels produced in the UK are certified toBES 6001 (Framework Standard for the Responsible Sourcing ofConstruction Products) ‘Very Good’. Kingspan Insulated Panelsdirectly contribute to BREEAM/LEED credits.SubstrateKingspanInsulated Panels9– Kingspan XL Forté, Kingspan Spectrum, Kingspan AQUAsafe,Kingspan AQUAsafe 55 and Kingspan CLEANsafe: Metallicprotected steel to BS EN 10346:2015.thickness 0.5mm.– CLEANsafe 15: Metallic protected steel to BS EN10346:2015.thickness 0.4mmAir LeakageAn air leakage rate of 3m3/hr/m2 at 50Pa or less can beachieved when using Kingspan insulated roof and wall panels.– Stainless Steel: Austenitic Grade 316 stainless steel toBS EN 10088: Part 2: 2005, thickness 0.4mm.Coatings - External Weather Sheet– Kingspan XL Forté: Consists of a multi-layer organic coating,embossed with a traditional leather-grain finish.AcousticSound Reduction Index (SRI)Hz*631252505001K2K4K5KSRI (dB)2421274148506368* FrequencyThe KS1000/2000 TS insulated roof panel with theNulok system has a predicted single figure weighted soundreduction of Rw 41dBBiologicalKingspan panels are normally immune to attack from mould,fungi, mildew and vermin. No urea formaldehyde is used in theconstruction, and the panels are not considered deleterious.– Kingspan Spectrum: Consists of a coated semi-gloss finishwith slight granular effect.Coatings – Internal Liner Sheet– Kingspan CLEANsafe 15: The coating has been developed foruse as the internal lining of insulated panels. Standard colouris “bright white” with an easily cleaned surface.– Kingspan AQUAsafe: The coating has been developed foruse as the internal lining of insulated panels to suit highhumidity internal environments.– Kingspan AQUAsafe 55: The coating has been developed foruse as the internal lining of insulated panels to swimmingpool internal environments.– Kingspan CLEANsafe 120: The coating has been developedfor use as the internal lining of insulated panels where a highlevel of cleanliness and hygiene is required, and the panelsare to be cleaned down on a regular basis.– Stainless Steel: The stainless steel liner has been developedfor use as the internal lining of insulated panels in buildingswith a very aggressive/corrosive internal environment.
10KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKS1000/2000 TS/NulokProduct DataPanel End Cut BackGuaranteeStandard Cut Back Eaves75mmStandard Cut Back Endlap150mmMinimum Cut Back20mmMaximum Cut Back300mmProduct ToleranceThe Kingspan Panel Protection Warranty covers the structuraland thermal performance of the panels for up to 25 years.Additionally a 25-year System Warranty is available coveringthe integration of the panel, fixings, and Nulok componentstogether.PackingCut to Length-5mm 5mmCover Width-2mm 2mmThickness-2mm 2mmEnd Square-3mm 3mmHandingThe KS1000/2000 TS insulated roof panel can be manufacturedin both left to right handed (LH) and right to left handed (RH).SealsFactory applied side & end lap weather seals.Panel Quality & DurabilityKS1000/2000 TS insulated roof panels are manufactured fromthe highest quality materials, using state of the art productionequipment to rigorous quality control standards, complyingwith BS EN ISO 9001 standard, ensuring long term reliabilityand service life. The panels are also being manufacturedunder Environmental Management System CertificationBS EN ISO 14001. Compliant to BS OHSAS 18001 OccupationalHealth and Safety.KS1000 TS insulated roof panels are stacked weather sheet toweather sheet (to minimise pack height). The top, bottom,sides and ends are protected with foam and timber packingand the entire pack is wrapped in plastic.Core Thickness (mm)405060No. of Panels in Pack17151370-80 100-120 137-1501176Note: Applies to UK pack sizes. Please contact Kingspan Technical Servicesfor export information.Sea FreightFully timber crated packs are available on projects requiringdelivery by sea freight shipping, at additional costs.Alternatively, steel containers can be used. Special loadingcharges apply.DeliveryAll deliveries (unless indicated otherwise) are by road transportto project site. Off-loading is the responsibility of the client.Site Installation ProcedureSite assembly instructions are available from KingspanTechnical Services.
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKingspanInsulated Panels11Structural TablesUnfactored load/span table (use unfactored calculated design wind load values).Tile Weight: Up to 15kg/m² (0.15kN/m²)Single SpanCoreThickness(mm)LoadTypeUniformly Distributed Loads kN/m2Span in .336.413.916.023.505.63Double SpanCoreThickness(mm)LoadTypeUniformly Distributed Loads kN/m2Span in .893.502.673.292.463.09Notes:1. Values have been calculated using the method described in BS EN 14509: 2013, for medium and light coloured panels.2. For each value individual and combined load cases with appropriate load factors and temperatures have been considered.3. The Table is for medium and light coloured panels, as recommended by Kingspan for roofs.4. The following deflection limits have been used: Downward loading L/200 – Suction loading L/1505. For intermediate values linear interpolation may be used.6. The actual wind suction load resisted by the panel is dependent on the number of fasteners used and the material of the purlin. The fastener calculation shouldbe carried out in accordance with the appropriate standard. For further advice please contact Kingspan Technical Services.7. The allowable steelwork tolerance between bearing planes of adjacent purlins is 5mm. For panel span for the 115mm, 120mm, 137mm and 150mm thick KS1000 TSinsulated roof panels, please contact Kingspan Technical Services on 0800 587 0090.
12KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKS1000/2000 TS/NulokProduct DataStructural TablesUnfactored load/span table (use unfactored calculated design wind load values).Tile Weight: Up to 45kg/m² (0.45kN/m²)Single SpanCoreThickness(mm)LoadTypeUniformly Distributed Loads kN/m2Span in .185.982.715.622.255.27Double SpanCoreThickness(mm)LoadTypeUniformly Distributed Loads kN/m2Span in .363.502.123.281.883.06Notes:1. Values have been calculated using the method described in BS EN 14509: 2013, for medium and light coloured panels.2. For each value individual and combined load cases with appropriate load factors and temperatures have been considered.3. The Table is for medium and light coloured panels, as recommended by Kingspan for roofs.4. The following deflection limits have been used: Downward loading L/200 – Suction loading L/1505. For intermediate values linear interpolation may be used.6. The actual wind suction load resisted by the panel is dependent on the number of fasteners used and the material of the purlin. The fastener calculation shouldbe carried out in accordance with the appropriate standard. For further advice please contact Kingspan Technical Services.7. The allowable steelwork tolerance between bearing planes of adjacent purlins is 5mm. For panel span for the 115mm, 120mm, 137mm and 150mm thick KS1000 TSinsulated roof panels, please contact Kingspan Technical Services on 0800 587 0090.
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKingspanInsulated Panels13Structural TablesUnfactored load/span table (use unfactored calculated design wind load values).Tile Weight: Up to 90kg/m² (0.90kN/m²)Single SpanCoreThickness(mm)LoadTypeUniformly Distributed Loads kN/m2Span in 3.505.63Double SpanCoreThickness(mm)LoadTypeUniformly Distributed Loads kN/m2Span in .563.50Notes:1. Values have been calculated using the method described in BS EN 14509: 2013, for medium and light coloured panels.2. For each value individual and combined load cases with appropriate load factors and temperatures have been considered.3. The Table is for medium and light coloured panels, as recommended by Kingspan for roofs.4. The following deflection limits have been used: Downward loading L/200 – Suction loading L/1505. For intermediate values linear interpolation may be used.6. The actual wind suction load resisted by the panel is dependent on the number of fasteners used and the material of the purlin. The fastener calculation shouldbe carried out in accordance with the appropriate standard. For further advice please contact Kingspan Technical Services.7. The allowable steelwork tolerance between bearing planes of adjacent purlins is 5mm. For panel span for the 115mm, 120mm, 137mm and 150mm thick KS1000 TSinsulated roof panels, please contact Kingspan Technical Services on 0800 587 0090.
14KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokNulokComponent SpecificationNulok Vitrified Ceramic SlatesNulok Fixing System– I.S. EN 1304: 1998 Clay Roofing Tiles for discontinuouslaying – Product definitions and specification and Class B1to I.S. EN 87: 1991 Ceramic floor and wall tiles – Definitions,classification, characteristics and markingNulok Metal Batten– Hot dipped galvanised mild steel; DX51D Z275 toI.S. EN 10327:2004: Continuously hot-dip coated stripand sheet of low carbon steels for cold forming.– Dimensions 400 mm long x 400 mm wide x 8.5mm thick– Thickness 1.2 mm– Water absorption 0.05 % I.S. EN 99: 1992 Ceramic tiles –Determination of water absorption– Width 48.1 mm– Bending strength 45n/mm2 I.S. EN 100: 1992 Ceramic tiles– Determination of modulus of rupture– Length 5400 mm– Weight/slate 3 Kg– Total Installed Weight – 27.5 Kg/m2– Colour Grey (other colours can be provided on request)Tests performed on Nulok Ceramic tiles– BS EN 538 1994 – Flexural Strength Test– BS EN 539 1994 – Physical Characteristic Permeability Test– Depth 24.3 mmNulok Link Channel– AZ55 Galvalume steel to ASTM A792/A792M – 03 StandardSpecification for steel sheet, 55% aluminium-zinc alloy –coated by the hot dip process, with 0.01 mm to 0.02 mmthick black automotive e-coating, post applied after cuttingand pressing.– Length 395 mm– Thickness 0.8 mm– BS EN 1304 1998 Product Definition and Specification TestNulok Stainless Steel Wire Spring Clip– 1.6 mm diameter, cold drawn, chemically blackened,316S42 stainless steel to I.S. EN 10270-3:2001 Steel wire formechanical springs. Part 3 Stainless spring steel wire– Water Absorption– Tensile strength 1460 n/mm2 to 1700 n/mm2– Resistance to indirect traction by means of bendingNulok Stainless Steel Universal Spring Clip– 2.03 mm thick, cold drawn, 316S42 stainless steel toI.S. EN 10270-3:2001– BS EN 539/2 1998 – Frost Resistance Test– BS EN 1024 1997 Geometric Test– Resistance to indirect traction by means of bendingafter freezing– Resistance to alterations caused by weather– External Fire Exposure– Steel wire for mechanical springs. Part 3 Stainless springsteel wire– BS 476: Part 3 1958– Wind Classification upto and including C2(cyclonic wind test).Nulok Natural Slate RangeFor full slate and tile options, including solar panels,please contact Kingspan Technical Services ontechnical@kingspanpanels.com or 0800 587 0090Test Performed on Nulok Fixing System– AS 2050 1989 Weather Effectiveness of Roofing SystemStructural– Upwards to ultimate– Upwards to serviceability– Downwards to ultimate– Downwards to serviceability
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKingspanInsulated PanelsPerlight SolarComponent SpecificationPLM-50M-14 SeriesMonocrystalline Silicon Solar Modules– 18.6-22.3% cell efficiency– High output and efficiency even under low light conditions– 0-3% power tolerance– Durable and reliable, quality tested and TUV certified– 3 years product warranty (materials and workmanship)– Performance warranties – 25 years 80% power output– 12 years 90% power outputElectrical PerformanceModule typePLM-50M-14Power output455055Power output tolerances Pmax%Voltage at PmaxVmppV7.367.59Current at PmaxImppA6.126.597.15Open-curcuit voltageVocV9.309.459.65Short-circuit currentIscA6.356.917.310-37.70STC: 1000 W/m2 irradiance, 25 C cell temperature, AM 1.5g spectrum according to EN60904-3.Thermal CharacteristicsNominal operating cell temperatureNOCT C45 2Temperature coefficient of Pmax?% / C-0.45Temperature coefficient of VocβVoc% / C-0.34Temperature coefficient of IscαIsc% / C0.06Temperature coefficient of VmppβVmpp% / C-0.40Operating ConditionsMax. System voltageLimiting reverse current1000VDC15AOperating temperature range-40ºC to 85ºCMax. Static load front (e.g., snow)5400PaMax. Static load back (e.g., wind)2400PaMax. Hailstone impact (diameter / velocity)25mm/23m/sOperating ConditionsPacking DetailsFront cover (material / thickness)Low-iron tempered glass / 3.2mmContainer20’GP40’GPBacksheet (color)Black3838Cell (quantity / material / dimensions)14 / monocrystalline silicon /156x156mmPieces perwooden case54NoneWooden casesper container24Frame (material / color)Junction box (protection degree) IP67Pieces per container9122052Cables900mm / 4mm2 / IP67Plug connectorsZhejiang Jiaming TianheyuanPhotovoltaic Co., LtdPV-JM601; Rated voltage 1000VDC;Rated current 16A; IP67Module Dimensions (L / W / H)1200mm x 400mm x 5.1mmModule Weight4.5kg15
16KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/Nulok
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKingspanInsulated PanelsKS1000/2000 TS/NulokProduct CompatibilityKS1000/2000 TS/Nulok is compatible with thefollowing Kingspan products.Product GroupProductFabricationsMembrane Lined Insulated GuttersHighline GuttersFlashingsFall Protection SystemsSafePro2Kingspan EnergyPhotovoltaic Roof TilesDaylightingDay-Lite VaultSafeSideDay-Lite KaptureKS1000/2000 TS/Nulok FabricationsFall Protection SystemsKingspan EnergyDaylighting17
18KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKS1000/2000 TS/NulokConstruction DetailsTS/Nulok RidgeDeflector flashing, with 150mm lapppedand sealed jointsLast tile, deflector flashing and Link Channelattached to batten with washered fastenerPremseal SGV15P 20mmx 9mmlow density PVC tapeRidge battenRidge batten support flashing, with 150mmlappped and sealed butt straps, attachedto each crownFire-rated canister insulationProfiled filler sealed top and bottomNulok dry-fix ridge tileNulok tile and batten systemAir seal - 20 x 9mm PVC foam tapeGun grade seal at panel jointinline with internal air sealKingspan multi beam purlinInternal ridge flashing with 150mm overlapsealed with a film backed butyl tape
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokTS/Nulok VergeSelf-drilling self-tapping primary fixings with minimum 19mm diameter non-ferrous EPDM backed washerAir seal – 20 x 9mm PVC foam tape or continuous bead of gun grade sealantRoof tile system includingbattens by NulokClosure flashingwith 150mmsealed buttstrapsKS1000 TS / LPCB Insulatedroof panelCleader angle by steelsub contractorKingspan MultibeamPurlinFascia board by othersCleader angle by steelsub contractorInternal closure flashing with 150mm overlap sealedwith film backed butyl tape or gun grade sealantAir seal 20 x 9mm PVC foam tape or 8mm diameterbutyl rubber sealantKingspanInsulated Panels19
20KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKS1000/2000 TS/NulokConstruction DetailsTS/Nulok Parapet VergeLead flashing or similar lapped over closureflashing and dressed into brickworkAir seal – 20 x 9mm PVCfoam tape or continuousbead of gun gradesealantVerge zed support, with150mm sealed lapsTapcon fixing with minimum 14mmdiameter non-ferrous EPDM backed washerfitted at maximum 450mm centresExternal 90x90mm verge flashing with150mm overlap sealed with film backed butyltape or gun grade sealant – Horizontal leg toalign with centre of Nulok link channelStitching screws with minimum 14mmdiameter non ferrous EPDM backed washerfitted at maximum 450mm centresRoof tile system including battens by NulokAir seal – 20 x 9mmPVC foam tape or8mm diameter butylrubber sealantTapcon fixing withminimum 14mm diameternon-ferrous EPDM backedwasher fitted at maximum450mm centresInternal closure flashingwith 150mm overlapsealed with film backedbutyl tape or gun gradesealantAir seal – 20 x 9mm PVCfoam tape or continuousbead of gun gradesealantKingspan MultibeamPurlinSelf-drilling self-tapping primaryfixings with minimum 19mm diameternon-ferrous EPDM backed washerKS1000 TS / LPCB Insulatedroof panel
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokTS/Nulok EavesSelf-drilling self-tapping primary fixings with minimum 19mm diameter non-ferrous EPDM backed washerKS1000 TS / LPCB insulated roof panelGun grade seal at panel joint inline with internal air sealAir seal – 20x9mm compressible PVC foam tape or 8mm diameter butyl rubber sealantInternal closure flashing with 100mm laps air sealed with gun grade sealantNulok roof tilesNulok link channelTile battens by NulokDrip flashingGutter &brackets byothersEaves beamFacsia and soffit by othersAir Seal – Compressible foam tapeKingspan Multibeam PurlinOverhang variesKingspanInsulated Panels21
22KingspanInsulated PanelsSlate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKS1000/2000 TS/NulokConstruction DetailsTS/Nulok Side and End LapSelf-drillingself-tappingprimary fixingswith minimum19mm diameternon-ferrous EPDMbacked washer4mm diameter butylrubber sealant (Siteapplied)6mm dia butyl rubbersealant vapour sealwhen required (siteapplied)m0m152 rows of 4mmdiameter butylrubber sealant(Site applied)linam .oxNm Mam10 mm2010in.MKingspanMultibeamPurlinKS1000 TS / LPCB insulated roof panel
Slate & Tile Support Insulated Roof Panel SystemKS1000/2000 TS/NulokKingspanInsulated Panels23TS/Nulok Hip ValleyTile battensby NulokNulok roof tilesNulok channellinkKS1000 TS / LPCBinsulated roof panelLow profile self-drilling self-tappingprimary fixings located in the panelvalley at 500mm centresSite applied fire rated canister insulationKingspan multibeam purlin0.6/0.6mm membrane coated galv steel hip valleygutter flashing. Joints to be fully welded with aPVC membrane jointing stripProfile of panelremoved on siteIn-situ weathering system byspecialist sub-contractorGun grade seal atpanel joint inlinewith internal air sealAir Seal – 20 x 9mm PVC foamtape or 8mm diameter butylrubber sealantCleader angle by steelworkcontractorInternal hip flashing with 150mm overlap sealedwith film backed butyl tape or gun grade sealant
UKKingspan LimitedGreenfield Business Park No.2Greenfield, HolywellFlintshire, CH8 7GJT: 44 (0) 1352 716100F: 44 (0) 1352 710161www.kingspanpanels.co.ukFor the product offering in other marketsplease contact your local sales representativeor visit www.kingspanpanels.comCare has been taken to ensure that the contents of this publicationare accurate, but Kingspan Limited and its subsidiary companies donot accept responsibility for errors or for information that is foundto be misleading. Suggestions for, or description of, the end use orapplication of products or methods of working are for informationonly and Kingspan Limited and its subsidiaries accept no liability inrespect thereof.01/2020
Slate & Tile Support Insulated Roof Panel System KS1000/2000 TS/Nulok A Modern Take on the Traditional Vernacular Roof Advanced Roofing Technology The Slate & Tile Support panel is an advanced insulated panel that has been designed to support either slate or tiles. The insulated panel provides U-Values as low as 0.14W/m²K
PSI AP Physics 1 Name_ Multiple Choice 1. Two&sound&sources&S 1∧&S p;Hz&and250&Hz.&Whenwe& esult&is:& (A) great&&&&&(C)&The&same&&&&&
Argilla Almond&David Arrivederci&ragazzi Malle&L. Artemis&Fowl ColferD. Ascoltail&mio&cuore Pitzorno&B. ASSASSINATION Sgardoli&G. Auschwitzero&il&numero&220545 AveyD. di&mare Salgari&E. Avventurain&Egitto Pederiali&G. Avventure&di&storie AA.&VV. Baby&sitter&blues Murail&Marie]Aude Bambini&di&farina FineAnna
FRSA/ROOF TILE INSTITUTE Adhesive Set Tile Specification as per the current edition. - Compliance with Miami Dade County RAS 127 Note: Glazed Tile - If a ceramic glazed or slate roof tile is going to be installed, please contact DuPont - Technical Dept., or your local representative from DuPont for compatibility.
The program, which was designed to push sales of Goodyear Aquatred tires, was targeted at sales associates and managers at 900 company-owned stores and service centers, which were divided into two equal groups of nearly identical performance. For every 12 tires they sold, one group received cash rewards and the other received
College"Physics" Student"Solutions"Manual" Chapter"6" " 50" " 728 rev s 728 rpm 1 min 60 s 2 rad 1 rev 76.2 rad s 1 rev 2 rad , π ω π " 6.2 CENTRIPETAL ACCELERATION 18." Verify&that ntrifuge&is&about 0.50&km/s,∧&Earth&in&its& orbit is&about p;linear&speed&of&a .
bliss element glass tile anatolia tile stone anatoliatile.com bliss - element glass tile 01 3" x 9" element ice beveled glass tile 38-018 3" x 12" element ice glass tile 38-000 3" x 12" element ice artisan glass tile 38-010 1.5" x 6" element ice stacked glass mosaics 35-114 element ice chevron glass mosaics 35-122
Multi-Width Slate Single-Width Slate DaVinci polymer slate is carefully engineered to provide the authentic look and durability of natural slate at a fraction of the cost and weight. Special care has been taken to make the product easy to install. By following these instructions, and using good installation practices, you will be
coronavirus and are considered ‘extremely vulnerable’. They include: people with severe respiratory conditions including all cystic fibrosis, severe asthma and severe COPD people on immunosuppression therapies sufficent to significantly increase risk of infection people with specific cancers or receiving cancer treatment. There are more groups in this list, so please visit the .
