RT-100 Inline Refractive Index / %Glycol / %BRIX - Pyxis Lab

1y ago
8 Views
2 Downloads
578.62 KB
6 Pages
Last View : 18d ago
Last Download : 3m ago
Upload by : Ellie Forte
Transcription

www.pyxis-lab.com DATA SHEET RT-100 Inline Refractive Index / %Glycol / %BRIX Product Description The PRISM RT-100 is an inline digital refractometer that measures the refractive index of a liquid sample & provides a direct reading of highly accurate concentration values for a wide variety of water and process related applications. It is a stand-alone device capable of self-sustained operation, live data display and data logging. The PRISM RT-100 offers fully integrated 4–20mA and RS-485 Modbus output signals for connectivity to any mircoprocessor, display, PLC or DCS network. The PRISM RT-100 has built-in temperature dependent equations to convert the measured sample temperature and refractive index to the percentage concentrations of Mono-Ethylene Glycol (MEG), Mono-Propylene Glycol (MPG), Sugar Content (BRIX) and Advanced Low Viscosity Fluid (ALV). Additional concentration curves may be added in the future by Pyxis Lab - as the market demands. The PRISM RT-100 is a very robust, digtial sensor and is capable of operating in contaminated fluid samples. It is important, however, to note that users should take all precautions to mitigate and filter suspended solids from the sample stream prior to the sensor. This is to avoid tenacious deposit buildup on the sensor eye. In highly fouled applications, Pyxis Lab recommends users conduct sensor eye cleaning on a regular basis per manual guidelines. Pyxis Lab is also developing an automated sensor cleaning accessory for installation into the Sanitary Fitting Tri-Clamp Flow Cell assembly, as an optional accessory in the near future. The materials of the PRISM RT-100 and Sanitary Tri-Clamp Flow Assembly consist of 316L stainless steel, neoprene and sapphire and are compliant with FDA-21 CFR177.2600 for inline sanitation in food and beverage process applications. Typical Applications Refractive Index Direct Read for Process Applications Mono-Ethylene Gylcol Closed Loop System Monitoring Mono-Propylene Glycol Closed Loop System Monitoring Brix/Sugar Concentration Process Applications Advanced Low Viscosity Fluid Heat Transfer Fluid Specific Gravity Determination via Refractive Index Contact Us at info@pyxis-lab.com for More Information.

Features 4–20mA Output of Sample Temperature & the unit of Display, Selected via the Screen Interface User Customizable 4–20mA Concentration Output Ranges with our uPyxis app RS-485 Modbus RTU Output of Temperature, Refractive Index and other Diagnosis Parameters Built-In Temperature Dependent Equations %BRIX, %MPG, %MEG and %ALV Future Addition of Product Concentration Curves by Pyxis Lab - as market requests Local Display & Push-Button Interface Optional 110VAC–240VDC Wall Outlet Powered for Independent Operation without a Controller Built-In Historical Data Log up to 56 Days of Storage at 1 Reading per Minute via uPyxis Bluetooth Enabled when used with the MA-CR Bluetooth Adapter Sturdy 316L Stainless Steel Tri-Clamp Flow Cell Assembly with 3/4inch NPT Flange Easy Installation & Removal for Cleaning & Maintenance - No Tools Needed Specifications Item PRISM RT-100 Part Number 55105 Refractive Index Range 1.30000–1.5100 BRIX Range 0.00–85.00% ALV, MPG & MEG Range 0.00–100.00% Temperature Range -20–80 ºC Resolutions Refractive Index: 0.0001 BRIX & Glycol: 0.1% Accuracy Refractive Index: 0.0002 BRIX & Glycol: 0.2% Sample Temperature -4–158 ºF (-20–70 ºC) Max Sample Pressure/Flow 142psi (0.98 MPa) / 13.5 GPM (9.8ft/s) Environmental Temperature 14–104 º F (-10–40 ºC) Weight 6.2lbs (2.8kg) Dimension 4.33 x 4.57 inch (110 x 116 mm) Light Source LED Wet Materials Sapphire, 316L Stainless Steel Signal Output/Power (2) 4–20mA & RS-485 Modbus / 24VDC (1.5W) Protection/Regulation IP-67 / CE & RoHS Marked

RT-100 PRISM Package (P/N: 55105) Includes (1) PRISM RT-100 Refractive Index Sensor (1) 8-Pin Female Cable (1) 316L Stainless Steel Tri-Clamp Flow Cell Assembly (P/N: 56206) (1) MA-1.5CR Cable (1.5m / 4.9ft 8-Pin Male Adapter & Flying Lead) (P/N: 50746) Optional Accessories - Purchased Separately Part Number Accessory 56207 Wall Outlet Power Supply Adapter - Plug In Power MA-CR MA-CR Bluetooth Adapter for uPyxis MA-NEB MA-NEB USB Bluetooth Adapter for uPyxis 50743 MA-50CR - 50ft 8-Pin Extension Cable SER-01 Sensor Cleaning Kit 56206 Tri-Clamp Flow Cell Assembly - Full Replacement 56209 Tr-Clamp Flow Cell Replacement Gasket Kit

Sensor Dimensions (mm) Flow Assembly Dimensions (mm)

RT-100 Tri-Clamp Flow Cell Components (Included with each RT-100 Purchase) ID # Description 1 Flow Cell with 2.5in Port for PRISM Sensor Head 2 Sensor Tri-Clamp 2.5in 3, 4, 8 Tri-Clamp Flow Cell Gasket Kit (P/N: 56209) 5 3/4inch FNPT Flange 6 Flange Tri-Clamp 2in 7 Plug Cap 64mm, Reserved Self-Cleaning

Order Information Part Number RT-100 PRISM Inline Refractometer 55105 Wall Outlet Power Supply Adapter Kit 56207 MA-CR Bluetooth Adapter MA-CR MA-NEB USB Bluetooth Adapter MA-NEB MA-50CR 50ft Extension Cable with 8-Pin Adapters 50743 Sensor Cleaning Kit SER-01 Tri-Clamp Flow Cell Assembly - Full Replacement 56206 Tri-Clamp Flow Cell Assembly Replacement Gasket Kit 56209 uPyxis Diagnosis, Calibration & Historical Data Transfer The uPyxis app manages all Pyxis Lab portable meter and inline sensors on mobile and desktop devices. When connected to the PRISM RT-100, the uPyxis app enables users to diagnose, air-calibrate Refractive Index Value, Off-Set Calibrate Liquid Concentrations to Refractive Index Value, Restore Factory Settings, Transfer Historically Logged Data and View Live Sensor Refractive Index & Temperature Data Trends. For wireless access to the RT-100, the MA-CR Bluetooth Adapter will be REQUIRED and should be purchased as an optional accessory. NOTE: The uPyxis mobile app is evolving rapidly and users can find the latest version at no cost on the Apple iStore or GooglePlay. The desktop version of the uPyxis app can be downloaded at: www.pyxis-lab.com/upyxis-app

RT-100 Inline Refractive Index / %Glycol / %BRIX. Product Description. The PRISM RT-100 is an inline digital refractometer that measures the refractive index of a liquid . sample & provides a direct reading of highly accurate concentration values for a wide variety of water . and process related applications.

Related Documents:

The refractive index is a function of the wavelength.The most common characteristic quantity for characterization of an optical glass is the refractive index n in the middle range of the visible spectrum. This principal refractive index is usually denoted as n d – the refractive index

Refractive Index A refractometer measures the extent to which light is bent (i.e. refracted) when it moves from air into a sample and is typically used to determine the index of refraction(“refractive index” or “n”) of a liquid sample.The refractive index is a unitless num

can be used to easily calculate the refractive index according to the equation: sin (θ. critical) n. 2 / n. 1. Where n. 2. is the refractive index of the lower-density medium; n. 1. is the refractive index of the higher-density medium. In the HI 96800, light from an LED passes through a prism in contact with the sample.

Refractive Index: 1.330RI-1.360RI Serum Protein: .2g/dl Specific Gravity: 0.005sg Refractive Index: 0.0005RI Serum Protein: 0.2g/dl Specific Gravity: 0.005sg Refractive Index: 0.0005RI Without Atc RHC-200ATC Serum Protein: -12g/dl Specific Gravity: 1.000-1.050sg Refractive Index: 1.330RI-1.360RI Serum Protein: .2g/dl Specific Gravity:

100%: 100%. 100%: 100%. 100%: 100%. 100%: 100%. 100%: 100%. 100%: 100%. 100%: 100%. 100%: 2. Plain Cement Concrete: 100%. 100%: 100%. 100%: 100%. 100%: 100%. 100% .

4 OTHER TECHNICAL DATA DIESEL ENGINE SPECIFICATIONS MODEL D226B-3D TD226B-3D WP4 WP6 WP10 WP12 Time 4 stroke Cylinder arrangement V Type, Inline V Type, Inline V Type, Inline V Type, Inline V Type, Inline Bore/Stroke (mm) 105/120 105/130 105/130 126/130 126/155 Displacement (liter) 3.12 4.5 6.75 9

GigaVUE-HC2 and FireEye NX 2400, a inline tool group solution through the FireEye GUI and Gigamon-OS H-VUE. The procedures are organized as follows: FireEye NX 2400 Configuration: Inline Tools Gigamon GigaVUE-HC2 Configuration: Inline Network and Inline Tool Groups. The FireEye GUI procedures focus on FireEye inline block operational mode.File Size: 1MBPage Count: 30

THE GUIDE SPRING BREAK CAMPS 2O2O MARCH 16–27 AGES 5–13. 2 2020 Spring Break Camp Guide WELCOME Build Your COCA Camp Day 2 March 16–20 Camps 3–4 March 23–27 Camps 5–6 Camp Basics 7 Registration Form 8–9 Registration Guidelines/Policies 10 Summer’s coming early this year! Join us over Spring Break for unique and fun arts learning experiences. You’ll find favorites from .