Cat C18 ACERT Diesel Engine Industrial - React Power Solutions

Cat C18 ACERT Diesel Engine Industrial On construction sites and mining operations, in agriculture and forestry, and in a wide range of industries, Cat C18 ACERT Industrial Diesel Engines deliver the power, performance and durability to take on the biggest challenges. More importantly, they're backed by the worldclass Cat dealer network ready to service and support every Cat industrial engine. Industries and applications powered by C18 ACERT engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer. Specifications Power Rating Minimum Power 447 bkW 600 BHP Maximum Power 597 bkW 800 BHP Rated Speed 1800-1900 Emission Standards Emissions U.S. EPA Tier 4 Final Nonroad, EU Stage IV Nonroad, U.S. EPA Tier 4 Interim Nonroad Equivalent (Not Currently EPA Certified) and EU Stage IIIB Nonroad Equivalent (NonCurrent for EU) Emission Standards. Designed to meet proposed EU Stage V Nonroad Emission Standards. General Engine Configuration In-Line 6, 4-Stroke-Cycle Diesel Bore 145 mm (5.71 in) Stroke 183 mm (7.2 in) Displacement Aspiration 18.1 L (1104.5 in³) Turbocharged-Aftercooled (TA) or Series Turbocharged Aftercooled (TTA) Compression Ratio 16.0:1 Combustion System Direct Injection Rotation from Flywheel End Counterclockwise Cooling System - Capacity 26.9 L (28.4 qt) Lube System - Refill SS-9098177-18375224-023 MSS-IND-18375224-018.pdf 40-74 L (42-78 qt) 2018 Caterpillar All Rights Reserved SS Page 1 of 7 Page: M-1 of M-5

Cat C18 ACERT Diesel Engine Industrial Engine Dimensions - Approximate Length 1438 mm (56.6 in) Width 943-1132 mm (37.1-44.6 in) Height 1239-1356 mm (48.8-53.4 in) Weight - Net Dry - Basic Operating Engine Without Optional Attachments 1580-1717 kg (3583-3785 lb) Aftertreatment Dimensions - Approximate Length 1097-1153 mm (43-45.4 in) Width 762-1112 mm (30-43.8 in) Height 468-652 mm (18-25.7 in) Weight 258-272 kg (569-600 lb) Diameter 330.2-355.6 mm (13-14 in) PETU Dimensions - Tier 4 Final, Stage IV Only Height 551 mm (21.7 in) Length 854 mm (33.6 in) Volume Capacity 48.4 L (51.1 qt) Weight 19.42 kg (42.8 lb) Width 287 mm (11.3 in) Benefits and Features Reliable, Quiet and Durable Power World-class manufacturing capability and processes coupled with proven core engine designs assure reliability, quiet operation, and many hours of productive life. High Performance Simple and efficient turbocharger or series turbocharger for high power applications. Fuel Efficiency Fuel consumption optimized to match operating cycles of a wide range of equipment and applications while maintaining low operating costs. Fuel & Oil Tier 4 Interim or Tier 4 Final, Stage IIIB or Stage IV engines require Ultra Low Sulfur Diesel (ULSD) fuel containing a maximum of 10 ppm sulfur (EU) and 15 ppm sulfur (U.S.), and new oil formulations to support the new technology. Cat engines are designed to accommodate B20 biofuel. Your Cat dealer can provide more information regarding fuel and oil. Broad Application Range Industry leading range of factory configurable ratings and options for agricultural, material handling, construction, mining, aircraft ground support, and other industrial applications. Package Size SS-9098177-18375224-023 MSS-IND-18375224-018.pdf 2018 Caterpillar All Rights Reserved SS Page 2 of 7 Page: M-2 of M-5

Cat C18 ACERT Diesel Engine Industrial Exceptional power density enables standardization across numerous applications. Multiple installation options minimize total package size. Ideal for equipment with narrow engine compartments. Quality Every Cat engine is manufactured to stringent quality standards in order to assure customer satisfaction. World-class Product Support Offered Through Global Cat Dealer Network Scheduled maintenance, including SOSSM sample Customer Support Agreements (CSA) Caterpillar Extended Service Coverage (ESC) Superior dealer service network Extended dealer service network through the Cat Industrial Service Distributor (ISD) program World-class Product Support Offered Through Global Cat Dealer Network Scheduled maintenance, including SOSSM sample Customer Support Agreements (CSA) Caterpillar Extended Service Coverage (ESC) Superior dealer service network Extended dealer service network through the Cat Industrial Service Distributor (ISD) program Tier 4 Interim, Stage IIIB Aftertreatment Features Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Flexible regeneration options maximize uptime. Mounting. Remote installation options provide OEM flexibility for many applications, including horizontal and vertical mounting, with and without muffler.Service. Minimum 5000 hour DPF ash service interval. Tier 4 Final, Stage IV Aftertreatment Features Regeneration. Cat Regeneration System maximizes fuel efficiency during regeneration. Transparent regeneration maximizes uptime. Aftertreatment life is twice as long as engine rebuild Mounting. Remote installation options provide OEM flexibility for many applications, including horizontal and vertical mounting.Service. Minimum 5000 hour DPF ash service interval. PETU filter service is 5000 hours. PETU DEF capacity up to 48 liters (51 U.S. quarts) Standard Equipment Air Inlet System Turbocharged Air-to-Air Aftercooled Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV) Control System Electronic control system Over-foam wiring harness Automatic altitude compensation Power compensated for fuel temperature Remote fan control Configurable software features SS-9098177-18375224-023 MSS-IND-18375224-018.pdf 2018 Caterpillar All Rights Reserved SS Page 3 of 7 Page: M-3 of M-5

Cat C18 ACERT Diesel Engine Industrial Engine monitoring system SAE J1939 broadcast and control Integrated Electronic Control Unit (ECU) Cooling System Thermostats and housing, vertical outlet Centrifugal water pump Guidance on cooling system design available through your dealer to ensure equipment reliability Flywheels and Flywheel Housing Choice of SAE No. 0 or SAE No. 1 flywheel housing Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV). Fuel System MEUI injection Primary fuel filter Secondary fuel filters Fuel transfer pump Electronic fuel priming Lube System Open crankcase ventilation system Oil cooler Oil filler Lube oil filter Oil dipstick Gear driven oil pump Choice of front, rear or center sumps Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV) Power Take Off (PTO) SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications. General Paint: Caterpillar yellow, with optional colors available at request U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp) Cat Regeneration System Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC) NOx Reduction System (NRS) Flex pipe connection kit with 90 rotatable elbows to attach to Cat Regeneration System Inlet Available in 12 volt or 24 volt systems U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment SS-9098177-18375224-023 MSS-IND-18375224-018.pdf 2018 Caterpillar All Rights Reserved SS Page 4 of 7 Page: M-4 of M-5

Cat C18 ACERT Diesel Engine Industrial Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp) Cat Regeneration System Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC) Aftertreatment Electronic Control Unit (ECU) NOx Reduction System (NRS) Pump Electronic Control Unit (PETU) Selective Catalytic Reduction (SCR) Available in 12V or 24V systems The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, ADEM, EUI, S O S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. SS-9098177-18375224-023 MSS-IND-18375224-018.pdf 2018 Caterpillar All Rights Reserved SS Page 5 of 7 Page: M-5 of M-5

INDUSTRIAL - Technical Spec Sheet AGRICULTURE, CONSTRUCTION, FORESTRY, GENERAL INDUSTRIAL, MATERIAL HANDLING, MINING C18 ACERT 563 bkW (755 bhp) @ 1900 rpm Emissions: U.S. EPA Tier 4 Interim Nonroad Equivalent Emission Standards (Not Currently EPA Certified) Rating Type: IND-C (INTERMITTENT) RATING C18 ACERT DITA 563 bkW (755 bhp) @ 1900 rpm Image shown may not reflect actual configuration Metric English 563 kW 755 hp General Engine Power Rating Number of Cylinders 6 Bore 145 mm 5.7 in Stroke 183 mm 7.2 in 18.1 L 1106.0 cu in. Displacement Compression Ratio 16.0 : 1 RATING DEFINITIONS AND CONDITIONS IND-C (INTERMITTENT) RATING:Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%). Diesel Engines — up to 7.1 liter All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (.295 in Hg), and 25 C (77 F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15 C (59 F) and fuel inlet temperature 40 C (104 F). Diesel Engines — greater than 7.1 liter All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in Hg) dry barometer and 25 C (77 F) temperature. Performance measured using a standard fuel with fuel gravity of 35 API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29 C (84.2 F) with a density of 838.9 g/L. SS-9098177-18375224-023 TSS-EM0213-08-VS-IND-9098177.pdf 2017 Caterpillar All Rights Reserved SS Page Page 1 of62of 7

INDUSTRIAL - Technical Spec Sheet AGRICULTURE, CONSTRUCTION, FORESTRY, GENERAL INDUSTRIAL, MATERIAL HANDLING, MINING C18 ACERT 563 bkW (755 bhp) @ 1900 rpm Emissions: U.S. EPA Tier 4 Interim Nonroad Equivalent Emission Standards (Not Currently EPA Certified) Rating Type: IND-C (INTERMITTENT) RATING Engine Speed rpm Engine Power bkW Engine Power bhp Torque N*m Torque lb-ft 1900 563 755 2830 2087 1800 563 755 2987 2203 1700 563 755 3163 2333 1600 552 740 3295 2430 1500 530 711 3374 2489 1400 506 679 3451 2546 1300 477 640 3504 2584 1200 427 573 3398 2506 1100 357 479 3099 2286 1000 282 378 2693 1986 900 235 315 2493 1839 800 189 253 2256 1664 700 144 193 1964 1449 600 99 133 1576 1162 The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, ADEM, EUI, S O S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. SS-9098177-18375224-023 TSS-EM0213-08-VS-IND-9098177.pdf 2017 Caterpillar All Rights Reserved SS Page Page 2 of72of 7

Cat industrial engine. Industries and applications powered by C18 ACERT engines include: Agriculture, Ag Tractors, . Weight 258-272 kg (569-600 lb) Diameter 330.2-355.6 mm (13-14 in) PETU Dimensions - Tier 4 Final, Stage IV Only Height 551 mm (21.7 in) Length 854 mm (33.6 in)