Double Universal Drive Shafts - X-Series - Power Test, LLC
Double Universal Drive Shafts - X-Series Overview The Power Test Drive Shaft is used to connect an engine to the dynamometer. A single drive shaft can accommodate a wide range of engine displacements. Drive Shafts: Feature adjustable lengths to allow for varying depths of engine flywheels Allow for parallel misalignment between the engine and the dynamometer Are available in a variety of capacities 43087 1810 Drive Shaft shown Dynamically-balanced Power Test UniversalJoint (Cardan shaft) Drive Shafts use commonly available components including cross and bearing assemblies and flanges for easy servicing when needed. 1810 DRIVE SHAFT SHOWN A - EXTENDED LENGTH B - COLLAPSED LENGTH (C - SLIP LENGTH) Dimensions - inches (mm) Part # A B C Max Torque* ft-lbs (Nm) 1410 Drive Shaft 43938 24 3/8 (620) 21 1/2 (546) 2 7/8 (74) 1,500 (2034) 5,000 16 (7) 1610 Drive Shaft 43694 24 3/8 (620) 21 1/2 (546) 2 7/8 (74) 3,650 (4949) 4,500 46 (21) 1610 Drive Shaft 43217 31 1/2 (800) 27 (686) 4 1/2 (115) 3,650 (4949) 4,500 49 (23) 1810 Drive Shaft 43087 31 5/8 (804) 28 1/4 (718) 3 3/8 (86) 6,500 (8813) 4,500 101 (46) 1910-12K Drive Shaft 43259 37 1/2 (953) 32 (813) 5 1/2 (140) 12,000 (16270) 2,500 166 (76) 1910-18K Drive Shaft 43784 35 1/2 (902) 31 1/2 (800) 4 (102) 18,000 (24405) 2,500 200 (91) Description Max RPM* Weight lbs (kg)) * Speed and torque ratings are short duration only and are for properly installed new drive shafts. We Make It Better page 1 of 3 N60 W22700 Silver Spring Drive Sussex, WI 53089 USA phone: (262) 252-4301 fax: (262) 246-0436 www.PowerTestDyno.com This information is subject to change without notice. Dimensions shown are for reference only. 2021 Power Test Document No. DSXS-SS-120128-4
X-Series Drive Shafts 1410 Drive Shaft 1610 Drive Shaft 1810 Drive Shaft 1910-12K Drive Shaft 1910-18K Drive Shaft At no time should the dynamometer be operated without a proper drive ! shaft guard securely fastened in place. WARNING! All personnel should be kept clear of the area and should not be in the test ! cell during testing. WARNING! We Make It Better page 2 of 3 N60 W22700 Silver Spring Drive Sussex, WI 53089 USA phone: (262) 252-4301 fax: (262) 246-0436 www.PowerTestDyno.com
X-Series Drive Shafts Description Part # Mounting Bolts Size **Bolt Torque Ft-Lbs (Nm) Bolt Qty. 1350 Drive Shaft 28240 7/16 70 (95) 8 1410 Drive Shaft 43938 7/16 70 (95) 8 1610 Drive Shaft 43694 3/8 45 (61) 16 1610 Drive Shaft 43217 3/8 45 (61) 16 1810 Drive Shaft 43087 7/16 70 (95) 24 1910-12K Drive Shaft 43259 5/8 220 (298) 16 1910-12K Drive Shaft 44202 5/8 220 (298) 16 ** Torque values are for dry threads, reduce by 20% for lubricated threads. N60 W22700 Silver Spring Drive Sussex, WI 53089 USA phone: (262) 252-4301 fax: (262) 246-0436 www.PowerTestDyno.com page 3 of 3 We Make It Better
Double Universal Drive Shafts - H36-Series Overview A Power Test Drive Shaft is used to connect an engine to the dynamometer. A single drive shaft can accommodate a wide range of engine displacements. Power Test Drive Shafts: Feature adjustable lengths to allow for varying depths of engine flywheels Allow for parallel misalignment between the engine and the dynamometer Are available in a variety of capacities 44048 315 DIN Drive Shaft shown Dynamically balanced Power Test universaljoint (Cardan shaft) drive shafts use commonly available components including cross and bearing assemblies and flanges for easy servicing when needed. A - EXTENDED LENGTH B - COLLAPSED LENGTH (C - SLIP LENGTH) 315 DIN DRIVE SHAFT SHOWN Dimensions - inches (mm) Description Part # A B C Max Torque* ft-lbs (Nm) 1910-12K Drive Shaft 44202 50 3/4 (1290) 45 1/4 (1150) 5 1/2 (140) 12,000 (16270) 2,500 230 (105) 315 DIN Drive Shaft 1013062 50 3/4 (1290) 45 7/16 (1154) 5 5/16 (135) 50,000 (67790) 2,500 520 (236) 350 DIN Drive Shaft 1025547 53 1/2 (1359) 49 1/2 (1257) 4 (101) 55,000 (74570) 2,500 775 (351) Max RPM* Weight lbs (kg) * Speed and torque ratings are short duration only and are for properly installed new drive shafts. We Make It Better page 1 of 2 N60 W22700 Silver Spring Drive Sussex, WI 53089 USA phone: (262) 252-4301 fax: (262) 246-0436 www.PowerTestDyno.com This information is subject to change without notice. 2021 Power Test Document No. H36DS-SS-131120-6
H36-Series Drive Shafts 1910-12K Drive Shaft 315 DIN Drive Shaft 350 DIN Drive Shaft 36 REF. 19 31 31 40 5/8 BOLT SIZE 8 PLACES ON A Ø8.250 B.C. 22.5 REF. M22 BOLT SIZE 8 PLACES ON A Ø11.024 (280mm) M22 BOLT SIZE 10 PLACES ON A Ø12.205 B.C. REF. At no time should the dynamometer be operated without a proper drive ! shaft guard securely fastened in place. WARNING! All personnel should be kept clear of the area and should not be in the test ! cell during testing. WARNING! Description Part # Mounting Bolts Size **Bolt Torque Ft-Lbs. (Nm) Bolt Qty. 1910-12K Drive Shaft 44202 5/8 220 (298) 16 315 DIN Drive Shaft 1013062 M22 600 (813) 16 350 DIN Drive Shaft 1025547 M22 600 (813) 20 ** Torque values are for dry threads, reduce by 20% for lubricated threads. We Make It Better page 2 of 2 N60 W22700 Silver Spring Drive Sussex, WI 53089 USA phone: (262) 252-4301 fax: (262) 246-0436 www.PowerTestDyno.com
1410 Drive Shaft 1610 Drive Shaft 1810 Drive Shaft 1910-12K Drive Shaft 1910-18K Drive Shaft At no time should the dynamometer be operated without a proper drive ! WARNING! shaft guard securely fastened in place. All personnel should be kept clear of the area and should not be in the test ! WARNING! cell during testing. page 2 of 3
These shafts transmit power between the source and the machines absorbing power. The counter shafts, line shafts, over head shafts and all factory shafts are transmission shafts. Since these shafts carry machine parts such as pulleys, gears etc., therefore they are subjected to bending in addition to twisting. 2. Machine shafts.
DIFFERENTIAL & AXLE SHAFTS REAR 1998 Mitsubishi Montero 1997-98 DRIVE AXLES Mitsubishi Differentials & Axle Shafts - Rear Non-Integral Montero, Montero Sport DESCRIPTION Rear axle features a rigid banjo-type housing with semi-floating axle shafts. Differential consists of hypoid reduction gears and straight bevel differential gears.
axle models that are used on 160, 161 and 164 series axles. Axle shafts: The axle shafts are grouped in sets (L.H. and R.H.) according to the axle models they are used on. Many axle shafts are used on more than one axle model. The axle shafts are also listed by part number with dimensions. Yokes and Flanges:
shafts made of elastically isotropic material, de Saint-Venant (1856) proposed that among all cylindrical shafts with given cross-sectional area, circular shafts will give the greatest torsional rigidity. A rigorous proof of this proposition was made nearly one century after by Diaz & Weinstein (1948) and Polya (1948).
made by the archer, the vaned shafts and the bare shafts will typically land in two separate groups, as shown in Figure 4. In the case of Figure 4, the bare shafts have landed to the left of the vaned shafts. This case indicates that the original misalignment
custom component options updated as of 8/10/21 taylormadegolf.com. driver/fwy shafts hybrid shafts exotic shafts iron shafts wedges putters swing grips putter grips build 2021 metalwoods updated s o 8/10/21 2 club loft hand lie volume length sw sim2 driver 8.0 rh 56 -60 460cc 45.75" d5
temperature in the above table to calculate the property. Also temperature as a function of enthalpy or entropy are included. Table 5.3 Public Functions in Region 3 public double Prt(double r, double t) pin kPa public double Rho(double p, double t, int phase) U in kg/m3. See Section 5.1 public double V(double p, double t) ( , ) p v pT RT
criminal justice systems in terms of homicide cases solved by the police, persons arrested for and per-sons convicted of homicide. Bringing the perpetrators of homicide to justice and preventing impunity for those responsible for lethal violence is a core responsibility of the State. Indeed, there is international recognition1 that the State is required to provide judicial protection with .
